From: Takashi Iwai <tiwai@suse.de>
To: Alexander Tsoy <alexander@tsoy.me>
Cc: alsa-devel@alsa-project.org
Subject: Re: [alsa-devel] [PATCH] ALSA: usb-audio: Add boot quirk for MOTU M Series
Date: Sun, 12 Jan 2020 09:47:47 +0100 [thread overview]
Message-ID: <s5hy2udjc24.wl-tiwai@suse.de> (raw)
In-Reply-To: <20200111233446.72046-1-alexander@tsoy.me>
On Sun, 12 Jan 2020 00:34:46 +0100,
Alexander Tsoy wrote:
>
> Add delay to make sure that audio urbs are not sent too early.
> Otherwise the device hangs. Windows driver makes ~2s delay, so use
> about the same time delay value.
>
> snd_usb_apply_boot_quirk() is called 3 times for my MOTU M4, which
> is an overkill. Thus a quirk that is called only once is implemented.
>
> Also send two vendor-specific control messages before and after
> the delay. This behaviour is blindly copied from the Windows driver.
>
> Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
The code change looks OK, but I get a lot of errors from
scripts/checkpatch.pl regarding the spaces.
Could you resubmit with those fixes?
thanks,
Takashi
> ---
> sound/usb/card.c | 4 ++++
> sound/usb/quirks.c | 38 ++++++++++++++++++++++++++++++++++++++
> sound/usb/quirks.h | 5 +++++
> 3 files changed, 47 insertions(+)
>
> diff --git a/sound/usb/card.c b/sound/usb/card.c
> index 9f743ebae615..2f582ac7cf78 100644
> --- a/sound/usb/card.c
> +++ b/sound/usb/card.c
> @@ -600,6 +600,10 @@ static int usb_audio_probe(struct usb_interface *intf,
> }
> }
> if (! chip) {
> + err = snd_usb_apply_boot_quirk_once(dev, intf, quirk, id);
> + if (err < 0)
> + return err;
> +
> /* it's a fresh one.
> * now look for an empty slot and create a new card instance
> */
> diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
> index 82184036437b..c93c53126243 100644
> --- a/sound/usb/quirks.c
> +++ b/sound/usb/quirks.c
> @@ -1113,6 +1113,31 @@ static int snd_usb_motu_microbookii_boot_quirk(struct usb_device *dev)
> return err;
> }
>
> +static int snd_usb_motu_m_series_boot_quirk(struct usb_device *dev)
> +{
> + int ret;
> +
> + if (snd_usb_pipe_sanity_check(dev, usb_sndctrlpipe(dev, 0)))
> + return -EINVAL;
> + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
> + 0x0, 0, NULL, 0, 1000);
> +
> + if (ret < 0)
> + return ret;
> +
> + msleep(2000);
> +
> + ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, USB_TYPE_VENDOR | USB_RECIP_DEVICE,
> + 0x20, 0, NULL, 0, 1000);
> +
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> /*
> * Setup quirks
> */
> @@ -1297,6 +1322,19 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev,
> return 0;
> }
>
> +int snd_usb_apply_boot_quirk_once(struct usb_device *dev,
> + struct usb_interface *intf,
> + const struct snd_usb_audio_quirk *quirk,
> + unsigned int id)
> +{
> + switch (id) {
> + case USB_ID(0x07fd, 0x0008): /* MOTU M Series */
> + return snd_usb_motu_m_series_boot_quirk(dev);
> + }
> +
> + return 0;
> +}
> +
> /*
> * check if the device uses big-endian samples
> */
> diff --git a/sound/usb/quirks.h b/sound/usb/quirks.h
> index a80e0ddd0736..fa83a98ad7bb 100644
> --- a/sound/usb/quirks.h
> +++ b/sound/usb/quirks.h
> @@ -20,6 +20,11 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev,
> const struct snd_usb_audio_quirk *quirk,
> unsigned int usb_id);
>
> +int snd_usb_apply_boot_quirk_once(struct usb_device *dev,
> + struct usb_interface *intf,
> + const struct snd_usb_audio_quirk *quirk,
> + unsigned int usb_id);
> +
> void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
> struct audioformat *fmt);
>
> --
> 2.24.1
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
prev parent reply other threads:[~2020-01-12 8:48 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-11 23:34 [alsa-devel] [PATCH] ALSA: usb-audio: Add boot quirk for MOTU M Series Alexander Tsoy
2020-01-12 8:47 ` Takashi Iwai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hy2udjc24.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alexander@tsoy.me \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).