From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Sam Bobroff <sbobroff@linux.ibm.com>,
Alex Deucher <alexander.deucher@amd.com>,
dri-devel@lists.freedesktop.org, amd-gfx@lists.freedesktop.org,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH AUTOSEL 4.4 172/174] drm/radeon: fix bad DMA from INTERRUPT_CNTL2
Date: Thu, 16 Jan 2020 12:42:49 -0500 [thread overview]
Message-ID: <20200116174251.24326-172-sashal@kernel.org> (raw)
In-Reply-To: <20200116174251.24326-1-sashal@kernel.org>
From: Sam Bobroff <sbobroff@linux.ibm.com>
[ Upstream commit 62d91dd2851e8ae2ca552f1b090a3575a4edf759 ]
The INTERRUPT_CNTL2 register expects a valid DMA address, but is
currently set with a GPU MC address. This can cause problems on
systems that detect the resulting DMA read from an invalid address
(found on a Power8 guest).
Instead, use the DMA address of the dummy page because it will always
be safe.
Fixes: d8f60cfc9345 ("drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)")
Fixes: 25a857fbe973 ("drm/radeon/kms: add support for interrupts on SI")
Fixes: a59781bbe528 ("drm/radeon: add support for interrupts on CIK (v5)")
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpu/drm/radeon/cik.c | 4 ++--
drivers/gpu/drm/radeon/r600.c | 4 ++--
drivers/gpu/drm/radeon/si.c | 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
index 80b6d6e4721a..7acde09c8e8f 100644
--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -7372,8 +7372,8 @@ static int cik_irq_init(struct radeon_device *rdev)
}
/* setup interrupt control */
- /* XXX this should actually be a bus address, not an MC address. same on older asics */
- WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
+ /* set dummy read address to dummy page address */
+ WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8);
interrupt_cntl = RREG32(INTERRUPT_CNTL);
/* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
* IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 0e20c08f8977..2056224d0b3c 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -3647,8 +3647,8 @@ int r600_irq_init(struct radeon_device *rdev)
}
/* setup interrupt control */
- /* set dummy read address to ring address */
- WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
+ /* set dummy read address to dummy page address */
+ WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8);
interrupt_cntl = RREG32(INTERRUPT_CNTL);
/* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
* IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index 5cf3a2cbc07e..4128c98d9054 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -6013,8 +6013,8 @@ static int si_irq_init(struct radeon_device *rdev)
}
/* setup interrupt control */
- /* set dummy read address to ring address */
- WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
+ /* set dummy read address to dummy page address */
+ WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8);
interrupt_cntl = RREG32(INTERRUPT_CNTL);
/* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
* IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN
--
2.20.1
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
parent reply other threads:[~2020-01-16 17:46 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <20200116174251.24326-1-sashal@kernel.org>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200116174251.24326-172-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sbobroff@linux.ibm.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).