[PATCH AUTOSEL 5.9 033/147] drm/amdgpu: restore ras flags when user resets eeprom(v2)

[PATCH AUTOSEL 5.9 033/147] drm/amdgpu: restore ras flags when user resets eeprom(v2)

[Sasha Levin]

From: Guchun Chen <guchun.chen@amd.com>

[ Upstream commit bf0b91b78f002faa1be1902a75eeb0797f9fbcf3 ]

RAS flags needs to be cleaned as well when user requires
one clean eeprom.

v2: RAS flags shall be restored after eeprom reset succeeds.

Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
index 1bedb416eebd0..b4fb5a473df5a 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
@@ -367,12 +367,19 @@ static ssize_t amdgpu_ras_debugfs_ctrl_write(struct file *f, const char __user *
 static ssize_t amdgpu_ras_debugfs_eeprom_write(struct file *f, const char __user *buf,
 		size_t size, loff_t *pos)
 {
-	struct amdgpu_device *adev = (struct amdgpu_device *)file_inode(f)->i_private;
+	struct amdgpu_device *adev =
+		(struct amdgpu_device *)file_inode(f)->i_private;
 	int ret;
 
-	ret = amdgpu_ras_eeprom_reset_table(&adev->psp.ras.ras->eeprom_control);
+	ret = amdgpu_ras_eeprom_reset_table(
+			&(amdgpu_ras_get_context(adev)->eeprom_control));
 
-	return ret == 1 ? size : -EIO;
+	if (ret == 1) {
+		amdgpu_ras_get_context(adev)->flags = RAS_DEFAULT_FLAGS;
+		return size;
+	} else {
+		return -EIO;
+	}
 }
 
 static const struct file_operations amdgpu_ras_debugfs_ctrl_ops = {
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.9 037/147] drm/scheduler: Scheduler priority fixes (v2)

[Sasha Levin]

From: Luben Tuikov <luben.tuikov@amd.com>

[ Upstream commit e2d732fdb7a9e421720a644580cd6a9400f97f60 ]

Remove DRM_SCHED_PRIORITY_LOW, as it was used
in only one place.

Rename and separate by a line
DRM_SCHED_PRIORITY_MAX to DRM_SCHED_PRIORITY_COUNT
as it represents a (total) count of said
priorities and it is used as such in loops
throughout the code. (0-based indexing is the
the count number.)

Remove redundant word HIGH in priority names,
and rename *KERNEL* to *HIGH*, as it really
means that, high.

v2: Add back KERNEL and remove SW and HW,
    in lieu of a single HIGH between NORMAL and KERNEL.

Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c   |  4 ++--
 drivers/gpu/drm/amd/amdgpu/amdgpu_job.c   |  2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c  |  2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h  |  2 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c |  6 +++---
 drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c   |  2 +-
 drivers/gpu/drm/scheduler/sched_main.c    |  4 ++--
 include/drm/gpu_scheduler.h               | 12 +++++++-----
 8 files changed, 18 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c
index 8842c55d4490b..fc695126b6e75 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c
@@ -46,7 +46,7 @@ const unsigned int amdgpu_ctx_num_entities[AMDGPU_HW_IP_NUM] = {
 static int amdgpu_ctx_priority_permit(struct drm_file *filp,
 				      enum drm_sched_priority priority)
 {
-	if (priority < 0 || priority >= DRM_SCHED_PRIORITY_MAX)
+	if (priority < 0 || priority >= DRM_SCHED_PRIORITY_COUNT)
 		return -EINVAL;
 
 	/* NORMAL and below are accessible by everyone */
@@ -65,7 +65,7 @@ static int amdgpu_ctx_priority_permit(struct drm_file *filp,
 static enum gfx_pipe_priority amdgpu_ctx_sched_prio_to_compute_prio(enum drm_sched_priority prio)
 {
 	switch (prio) {
-	case DRM_SCHED_PRIORITY_HIGH_HW:
+	case DRM_SCHED_PRIORITY_HIGH:
 	case DRM_SCHED_PRIORITY_KERNEL:
 		return AMDGPU_GFX_PIPE_PRIO_HIGH;
 	default:
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
index 937029ad5271a..dcfe8a3b03ffb 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c
@@ -251,7 +251,7 @@ void amdgpu_job_stop_all_jobs_on_sched(struct drm_gpu_scheduler *sched)
 	int i;
 
 	/* Signal all jobs not yet scheduled */
-	for (i = DRM_SCHED_PRIORITY_MAX - 1; i >= DRM_SCHED_PRIORITY_MIN; i--) {
+	for (i = DRM_SCHED_PRIORITY_COUNT - 1; i >= DRM_SCHED_PRIORITY_MIN; i--) {
 		struct drm_sched_rq *rq = &sched->sched_rq[i];
 
 		if (!rq)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c
index 13ea8ebc421c6..6d4fc79bf84aa 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.c
@@ -267,7 +267,7 @@ int amdgpu_ring_init(struct amdgpu_device *adev, struct amdgpu_ring *ring,
 			&ring->sched;
 	}
 
-	for (i = 0; i < DRM_SCHED_PRIORITY_MAX; ++i)
+	for (i = DRM_SCHED_PRIORITY_MIN; i < DRM_SCHED_PRIORITY_COUNT; ++i)
 		atomic_set(&ring->num_jobs[i], 0);
 
 	return 0;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h
index da871d84b7424..7112137689db0 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ring.h
@@ -243,7 +243,7 @@ struct amdgpu_ring {
 	bool			has_compute_vm_bug;
 	bool			no_scheduler;
 
-	atomic_t		num_jobs[DRM_SCHED_PRIORITY_MAX];
+	atomic_t		num_jobs[DRM_SCHED_PRIORITY_COUNT];
 	struct mutex		priority_mutex;
 	/* protected by priority_mutex */
 	int			priority;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c
index c799691dfa848..17661ede94885 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c
@@ -36,14 +36,14 @@ enum drm_sched_priority amdgpu_to_sched_priority(int amdgpu_priority)
 {
 	switch (amdgpu_priority) {
 	case AMDGPU_CTX_PRIORITY_VERY_HIGH:
-		return DRM_SCHED_PRIORITY_HIGH_HW;
+		return DRM_SCHED_PRIORITY_HIGH;
 	case AMDGPU_CTX_PRIORITY_HIGH:
-		return DRM_SCHED_PRIORITY_HIGH_SW;
+		return DRM_SCHED_PRIORITY_HIGH;
 	case AMDGPU_CTX_PRIORITY_NORMAL:
 		return DRM_SCHED_PRIORITY_NORMAL;
 	case AMDGPU_CTX_PRIORITY_LOW:
 	case AMDGPU_CTX_PRIORITY_VERY_LOW:
-		return DRM_SCHED_PRIORITY_LOW;
+		return DRM_SCHED_PRIORITY_MIN;
 	case AMDGPU_CTX_PRIORITY_UNSET:
 		return DRM_SCHED_PRIORITY_UNSET;
 	default:
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
index 978bae7313980..b7fd0cdffce0e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c
@@ -2101,7 +2101,7 @@ void amdgpu_ttm_set_buffer_funcs_status(struct amdgpu_device *adev, bool enable)
 		ring = adev->mman.buffer_funcs_ring;
 		sched = &ring->sched;
 		r = drm_sched_entity_init(&adev->mman.entity,
-				          DRM_SCHED_PRIORITY_KERNEL, &sched,
+					  DRM_SCHED_PRIORITY_KERNEL, &sched,
 					  1, NULL);
 		if (r) {
 			DRM_ERROR("Failed setting up TTM BO move entity (%d)\n",
diff --git a/drivers/gpu/drm/scheduler/sched_main.c b/drivers/gpu/drm/scheduler/sched_main.c
index 96f763d888af5..9a0d77a680180 100644
--- a/drivers/gpu/drm/scheduler/sched_main.c
+++ b/drivers/gpu/drm/scheduler/sched_main.c
@@ -625,7 +625,7 @@ drm_sched_select_entity(struct drm_gpu_scheduler *sched)
 		return NULL;
 
 	/* Kernel run queue has higher priority than normal run queue*/
-	for (i = DRM_SCHED_PRIORITY_MAX - 1; i >= DRM_SCHED_PRIORITY_MIN; i--) {
+	for (i = DRM_SCHED_PRIORITY_COUNT - 1; i >= DRM_SCHED_PRIORITY_MIN; i--) {
 		entity = drm_sched_rq_select_entity(&sched->sched_rq[i]);
 		if (entity)
 			break;
@@ -852,7 +852,7 @@ int drm_sched_init(struct drm_gpu_scheduler *sched,
 	sched->name = name;
 	sched->timeout = timeout;
 	sched->hang_limit = hang_limit;
-	for (i = DRM_SCHED_PRIORITY_MIN; i < DRM_SCHED_PRIORITY_MAX; i++)
+	for (i = DRM_SCHED_PRIORITY_MIN; i < DRM_SCHED_PRIORITY_COUNT; i++)
 		drm_sched_rq_init(sched, &sched->sched_rq[i]);
 
 	init_waitqueue_head(&sched->wake_up_worker);
diff --git a/include/drm/gpu_scheduler.h b/include/drm/gpu_scheduler.h
index b9780ae9dd26c..72dc3a95fbaad 100644
--- a/include/drm/gpu_scheduler.h
+++ b/include/drm/gpu_scheduler.h
@@ -33,14 +33,16 @@
 struct drm_gpu_scheduler;
 struct drm_sched_rq;
 
+/* These are often used as an (initial) index
+ * to an array, and as such should start at 0.
+ */
 enum drm_sched_priority {
 	DRM_SCHED_PRIORITY_MIN,
-	DRM_SCHED_PRIORITY_LOW = DRM_SCHED_PRIORITY_MIN,
 	DRM_SCHED_PRIORITY_NORMAL,
-	DRM_SCHED_PRIORITY_HIGH_SW,
-	DRM_SCHED_PRIORITY_HIGH_HW,
+	DRM_SCHED_PRIORITY_HIGH,
 	DRM_SCHED_PRIORITY_KERNEL,
-	DRM_SCHED_PRIORITY_MAX,
+
+	DRM_SCHED_PRIORITY_COUNT,
 	DRM_SCHED_PRIORITY_INVALID = -1,
 	DRM_SCHED_PRIORITY_UNSET = -2
 };
@@ -274,7 +276,7 @@ struct drm_gpu_scheduler {
 	uint32_t			hw_submission_limit;
 	long				timeout;
 	const char			*name;
-	struct drm_sched_rq		sched_rq[DRM_SCHED_PRIORITY_MAX];
+	struct drm_sched_rq		sched_rq[DRM_SCHED_PRIORITY_COUNT];
 	wait_queue_head_t		wake_up_worker;
 	wait_queue_head_t		job_scheduled;
 	atomic_t			hw_rq_count;
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.9 070/147] drm/amd/display: Check clock table return

[Sasha Levin]

From: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>

[ Upstream commit 4b4f21ff7f5d11bb77e169b306dcbc5b216f5db5 ]

During the load processes for Renoir, our display code needs to retrieve
the SMU clock and voltage table, however, this operation can fail which
means that we have to check this scenario. Currently, we are not
handling this case properly and as a result, we have seen the following
dmesg log during the boot:

RIP: 0010:rn_clk_mgr_construct+0x129/0x3d0 [amdgpu]
...
Call Trace:
 dc_clk_mgr_create+0x16a/0x1b0 [amdgpu]
 dc_create+0x231/0x760 [amdgpu]

This commit fixes this issue by checking the return status retrieved
from the clock table before try to populate any bandwidth.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
index 21a3073c8929e..2f8fee05547ac 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn21/rn_clk_mgr.c
@@ -761,6 +761,7 @@ void rn_clk_mgr_construct(
 {
 	struct dc_debug_options *debug = &ctx->dc->debug;
 	struct dpm_clocks clock_table = { 0 };
+	enum pp_smu_status status = 0;
 
 	clk_mgr->base.ctx = ctx;
 	clk_mgr->base.funcs = &dcn21_funcs;
@@ -817,8 +818,10 @@ void rn_clk_mgr_construct(
 	clk_mgr->base.bw_params = &rn_bw_params;
 
 	if (pp_smu && pp_smu->rn_funcs.get_dpm_clock_table) {
-		pp_smu->rn_funcs.get_dpm_clock_table(&pp_smu->rn_funcs.pp_smu, &clock_table);
-		if (ctx->dc_bios && ctx->dc_bios->integrated_info) {
+		status = pp_smu->rn_funcs.get_dpm_clock_table(&pp_smu->rn_funcs.pp_smu, &clock_table);
+
+		if (status == PP_SMU_RESULT_OK &&
+		    ctx->dc_bios && ctx->dc_bios->integrated_info) {
 			rn_clk_mgr_helper_populate_bw_params (clk_mgr->base.bw_params, &clock_table, ctx->dc_bios->integrated_info);
 		}
 	}
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.9 076/147] drm/amdgpu: No sysfs, not an error condition

[Sasha Levin]

From: Luben Tuikov <luben.tuikov@amd.com>

[ Upstream commit 5aea5327ea2ddf544cbeff096f45fc2319b0714e ]

Not being able to create amdgpu sysfs attributes
is not a fatal error warranting not to continue
to try to bring up the display. Thus, if we get
an error trying to create amdgpu sysfs attrs,
report it and continue on to try to bring up
a display.

Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Slava Abramov <slava.abramov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index d0b8d0d341af5..2576c299958c5 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -3316,10 +3316,8 @@ int amdgpu_device_init(struct amdgpu_device *adev,
 		flush_delayed_work(&adev->delayed_init_work);
 
 	r = sysfs_create_files(&adev->dev->kobj, amdgpu_dev_attributes);
-	if (r) {
+	if (r)
 		dev_err(adev->dev, "Could not create amdgpu device attr\n");
-		return r;
-	}
 
 	if (IS_ENABLED(CONFIG_PERF_EVENTS))
 		r = amdgpu_pmu_init(adev);
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.9 100/147] drm/amd/display: HDMI remote sink need mode validation for Linux

[Sasha Levin]

From: Fangzhi Zuo <Jerry.Zuo@amd.com>

[ Upstream commit 95d620adb48f7728e67d82f56f756e8d451cf8d2 ]

[Why]
Currently mode validation is bypassed if remote sink exists. That
leads to mode set issue when a BW bottle neck exists in the link path,
e.g., a DP-to-HDMI converter that only supports HDMI 1.4.

Any invalid mode passed to Linux user space will cause the modeset
failure due to limitation of Linux user space implementation.

[How]
Mode validation is skipped only if in edid override. For real remote
sink, clock limit check should be done for HDMI remote sink.

Have HDMI related remote sink going through mode validation to
elimiate modes which pixel clock exceeds BW limitation.

Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 437d1a7a16fe7..b0f8bfd48d102 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -2441,7 +2441,7 @@ enum dc_status dc_link_validate_mode_timing(
 	/* A hack to avoid failing any modes for EDID override feature on
 	 * topology change such as lower quality cable for DP or different dongle
 	 */
-	if (link->remote_sinks[0])
+	if (link->remote_sinks[0] && link->remote_sinks[0]->sink_signal == SIGNAL_TYPE_VIRTUAL)
 		return DC_OK;
 
 	/* Passive Dongle */
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.9 101/147] drm/amd/display: Avoid set zero in the requested clk

[Sasha Levin]

From: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>

[ Upstream commit 2f8be0e516803cc3fd87c1671247896571a5a8fb ]

[Why]
Sometimes CRTCs can be disabled due to display unplugging or temporarily
transition in the userspace; in these circumstances, DCE tries to set
the minimum clock threshold. When we have this situation, the function
bw_calcs is invoked with number_of_displays set to zero, making DCE set
dispclk_khz and sclk_khz to zero. For these reasons, we have seen some
ATOM bios errors that look like:

[drm:atom_op_jump [amdgpu]] *ERROR* atombios stuck in loop for more than
5secs aborting
[drm:amdgpu_atom_execute_table_locked [amdgpu]] *ERROR* atombios stuck
executing EA8A (len 761, WS 0, PS 0) @ 0xEABA

[How]
This error happens due to an attempt to optimize the bandwidth using the
sclk, and the dispclk clock set to zero. Technically we handle this in
the function dce112_set_clock, but we are not considering the case that
this value is set to zero. This commit fixes this issue by ensuring that
we never set a minimum value below the minimum clock threshold.

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Eryk Brol <eryk.brol@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/clk_mgr/dce112/dce112_clk_mgr.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce112/dce112_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce112/dce112_clk_mgr.c
index d031bd3d30724..807dca8f7d7aa 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dce112/dce112_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dce112/dce112_clk_mgr.c
@@ -79,8 +79,7 @@ int dce112_set_clock(struct clk_mgr *clk_mgr_base, int requested_clk_khz)
 	memset(&dce_clk_params, 0, sizeof(dce_clk_params));
 
 	/* Make sure requested clock isn't lower than minimum threshold*/
-	if (requested_clk_khz > 0)
-		requested_clk_khz = max(requested_clk_khz,
+	requested_clk_khz = max(requested_clk_khz,
 				clk_mgr_dce->base.dentist_vco_freq_khz / 62);
 
 	dce_clk_params.target_clock_frequency = requested_clk_khz;
-- 
2.25.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx