On Wed, Apr 28, 2021 at 11:22 PM Alex Deucher wrote: > > On Tue, Apr 20, 2021 at 5:25 PM Alex Deucher wrote: > > > > On Fri, Apr 16, 2021 at 12:29 PM Mario Kleiner > > wrote: > > > > > > Friendly ping to the AMD people. Nicholas, Harry, Alex, any feedback? > > > Would be great to get this in sooner than later. > > > > > > > No objections from me. > > > > I don't have any objections to merging this. Are the IGT tests available? > > Alex >. IGT Patches are out now, already r-b by Ville, cc'd to you. As mentioned in the cover letter for those, the new 16 bpc test cases on top o f IGT master for kms_plane test now work nicely on my RavenRidge, but i had to add hacks on top of kms_plane test to make it work at all on RV, ie. get it to the point where it could execute the tests for the new formats at all. Unmodified kms_plane from master doesn't even work on RV with Linux 5.8. Seems IGT is quite a bit out of date wrt. the kernel? Things i had to do: - Skip all tests for modifiers other than linear. --> Test requirements wrt. tiling not met. Seems all the modifier support for DCC, DCC_RETILE on Vega+ is missing from IGT so far? - Skip test for format DRM_FORMAT_RGB565. CRC mismatch. Probably because a 5 bpc container can't represent the net 8 bpc content from the reference test image? Maybe all tests for < 8 bpc formats should be skipped? - Skip tests for yuv planar formats with BT2020 color space: Limited range unsupported by DC, full range causes CRC mismatch. - Problems with crc vblank count expected vs. actual for planar YUV formats. - If the tests try to test more than the primary plane, igt_pipe_crc_start() fails to open the crtc/crc/data file with -EIO. See the attached patch with all the needed hacks. Not sure which of these are limitations of the IGT test, and which are amdgpu bugs or hw limitations, but applying this hack-patch on top of the patches for the new formats makes kms_plane pass. -mario > > Alex > > > > > > > Thanks and have a nice weekend, > > > -mario > > > > > > On Fri, Mar 19, 2021 at 10:03 PM Mario Kleiner > > > wrote: > > > > > > > > Hi, > > > > > > > > this patch series adds the fourcc's for 16 bit fixed point unorm > > > > framebuffers to the core, and then an implementation for AMD gpu's > > > > with DisplayCore. > > > > > > > > This is intended to allow for pageflipping to, and direct scanout of, > > > > Vulkan swapchain images in the format VK_FORMAT_R16G16B16A16_UNORM. > > > > I have patched AMD's GPUOpen amdvlk OSS driver to enable this format > > > > for swapchains, mapping to DRM_FORMAT_XBGR16161616: > > > > Link: https://github.com/kleinerm/pal/commit/a25d4802074b13a8d5f7edc96ae45469ecbac3c4 > > > > > > > > My main motivation for this is squeezing every bit of precision > > > > out of the hardware for scientific and medical research applications, > > > > where fp16 in the unorm range is limited to ~11 bpc effective linear > > > > precision in the upper half [0.5;1.0] of the unorm range, although > > > > the hardware could do at least 12 bpc. > > > > > > > > It has been successfully tested on AMD RavenRidge (DCN-1), and with > > > > Polaris11 (DCE-11.2). Up to two displays were active on RavenRidge > > > > (DP 2560x1440@144Hz + HDMI 2560x1440@120Hz), the maximum supported > > > > on my hw, both running at 10 bpc DP output depth. > > > > > > > > Up to three displays were active on the Polaris (DP 2560x1440@144Hz + > > > > 2560x1440@100Hz USB-C DP-altMode-to-HDMI converter + eDP 2880x1800@60Hz > > > > Apple Retina panel), all running at 10 bpc output depth. > > > > > > > > No malfunctions, visual artifacts or other oddities were observed > > > > (apart from an adventureous mess of cables and adapters on my desk), > > > > suggesting it works. > > > > > > > > I used my automatic photometer measurement procedure to verify the > > > > effective output precision of 10 bpc DP native signal + spatial > > > > dithering in the gpu as enabled by the amdgpu driver. Results show > > > > the expected 12 bpc precision i hoped for -- the current upper limit > > > > for AMD display hw afaik. > > > > > > > > So it seems to work in the way i hoped :). > > > > > > > > Some open questions wrt. AMD DC, to be addressed in this patch series, or follow up > > > > patches if neccessary: > > > > > > > > - For the atomic check for plane scaling, the current patch will > > > > apply the same hw limits as for other rgb fixed point fb's, e.g., > > > > for 8 bpc rgb8. Is this correct? Or would we need to use the fp16 > > > > limits, because this is also a 64 bpp format? Or something new > > > > entirely? > > > > > > > > - I haven't added the new fourcc to the DCC tables yet. Should i? > > > > > > > > - I had to change an assert for DCE to allow 36bpp linebuffers (patch 4/5). > > > > It looks to me as if that assert was inconsistent with other places > > > > in the driver where COLOR_DEPTH121212 is supported, and looking at > > > > the code, the change seems harmless. At least on DCE-11.2 the change > > > > didn't cause any noticeable (by myself) or measurable (by my equipment) > > > > problems on any of the 3 connected displays. > > > > > > > > - Related to that change, while i needed to increase lb pixelsize to 36bpp > > > > to get > 10 bpc effective precision on DCN, i didn't need to do that > > > > on DCE. Also no change of lb pixelsize was needed on either DCN or DCe > > > > to get > 10 bpc precision for fp16 framebuffers, so something seems to > > > > behave differently for floating point 16 vs. fixed point 16. This all > > > > seems to suggest one could leave lb pixelsize at the old 30 bpp value > > > > on at least DCE-11.2 and still get the > 10 bpc precision if one wanted > > > > to avoid the changes of patch 4/5. > > > > > > > > Thanks, > > > > -mario > > > > > > > > > > > _______________________________________________ > > > dri-devel mailing list > > > dri-devel@lists.freedesktop.org > > > https://lists.freedesktop.org/mailman/listinfo/dri-devel