amd-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Harry Wentland <hwentlan@amd.com>
To: "Jerry (Fangzhi) Zuo" <Jerry.Zuo@amd.com>,
	intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
	amd-gfx@lists.freedesktop.org
Cc: rodrigo.siqueira@amd.com,
	"Jani Nikula" <jani.nikula@linux.intel.com>,
	manasi.d.navare@intel.com, Alexander.Deucher@amd.com,
	harry.wentland@amd.com, nicholas.kazlauskas@amd.com,
	"Ville Syrjälä" <ville.syrjala@linux.intel.com>
Subject: Re: [PATCH V6] drm: Add support for DP 1.4 Compliance edid corruption test
Date: Wed, 5 Feb 2020 11:03:40 -0500	[thread overview]
Message-ID: <ce8ecfd7-1edb-ec8b-c9c8-275072882537@amd.com> (raw)
In-Reply-To: <20200205152248.32419-1-Jerry.Zuo@amd.com>



On 2020-02-05 10:22 a.m., Jerry (Fangzhi) Zuo wrote:
> Unlike DP 1.2 edid corruption test, DP 1.4 requires to calculate
> real CRC value of the last edid data block, and write it back.
> Current edid CRC calculates routine adds the last CRC byte,
> and check if non-zero.
> 
> This behavior is not accurate; actually, we need to return
> the actual CRC value when corruption is detected.
> This commit changes this issue by returning the calculated CRC,
> and initiate the required sequence.
> 
> Change since v6
> - Add return check
> 
> Change since v5
> - Obtain real CRC value before dumping bad edid
> 
> Change since v4
> - Fix for CI.CHECKPATCH
> 
> Change since v3
> - Fix a minor typo.
> 
> Change since v2
> - Rewrite checksum computation routine to avoid duplicated code.
> - Rename to avoid confusion.
> 
> Change since v1
> - Have separate routine for returning real CRC.
> 
> Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>

Please make sure to add the Reviewed-bys you've received on previous
versions. I've already reviewed v5 and an earlier one. Please add my
Reviewed-by.

Harry

> ---
>  drivers/gpu/drm/drm_dp_helper.c | 51 +++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/drm_edid.c      | 23 ++++++++++++---
>  include/drm/drm_connector.h     |  6 ++++
>  include/drm/drm_dp_helper.h     |  3 ++
>  4 files changed, 79 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
> index f629fc5494a4..1efd609df402 100644
> --- a/drivers/gpu/drm/drm_dp_helper.c
> +++ b/drivers/gpu/drm/drm_dp_helper.c
> @@ -351,6 +351,57 @@ int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux,
>  }
>  EXPORT_SYMBOL(drm_dp_dpcd_read_link_status);
>  
> +/**
> + * drm_dp_send_real_edid_checksum() - send back real edid checksum value
> + * @aux: DisplayPort AUX channel
> + * @real_edid_checksum: real edid checksum for the last block
> + *
> + * Returns:
> + * True on success
> + */
> +bool drm_dp_send_real_edid_checksum(struct drm_dp_aux *aux,
> +				    u8 real_edid_checksum)
> +{
> +	u8 link_edid_read = 0, auto_test_req = 0, test_resp = 0;
> +
> +	if (drm_dp_dpcd_read(aux, DP_DEVICE_SERVICE_IRQ_VECTOR, &auto_test_req, 1) < 1) {
> +		DRM_ERROR("DPCD failed read at register 0x%x\n", DP_DEVICE_SERVICE_IRQ_VECTOR);
> +		return false;
> +	}
> +	auto_test_req &= DP_AUTOMATED_TEST_REQUEST;
> +
> +	if (drm_dp_dpcd_read(aux, DP_TEST_REQUEST, &link_edid_read, 1) < 1) {
> +		DRM_ERROR("DPCD failed read at register 0x%x\n", DP_TEST_REQUEST);
> +		return false;
> +	}
> +	link_edid_read &= DP_TEST_LINK_EDID_READ;
> +
> +	if (!auto_test_req || !link_edid_read) {
> +		DRM_DEBUG_KMS("Source DUT does not support TEST_EDID_READ\n");
> +		return false;
> +	}
> +
> +	if (drm_dp_dpcd_write(aux, DP_DEVICE_SERVICE_IRQ_VECTOR, &auto_test_req, 1) < 1) {
> +		DRM_ERROR("DPCD failed write at register 0x%x\n", DP_DEVICE_SERVICE_IRQ_VECTOR);
> +		return false;
> +	}
> +
> +	/* send back checksum for the last edid extension block data */
> +	if (drm_dp_dpcd_write(aux, DP_TEST_EDID_CHECKSUM, &real_edid_checksum, 1) < 1) {
> +		DRM_ERROR("DPCD failed write at register 0x%x\n", DP_TEST_EDID_CHECKSUM);
> +		return false;
> +	}
> +
> +	test_resp |= DP_TEST_EDID_CHECKSUM_WRITE;
> +	if (drm_dp_dpcd_write(aux, DP_TEST_RESPONSE, &test_resp, 1) < 1) {
> +		DRM_ERROR("DPCD failed write at register 0x%x\n", DP_TEST_RESPONSE);
> +		return false;
> +	}
> +
> +	return true;
> +}
> +EXPORT_SYMBOL(drm_dp_send_real_edid_checksum);
> +
>  /**
>   * drm_dp_downstream_max_clock() - extract branch device max
>   *                                 pixel rate for legacy VGA
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 99769d6c9f84..f064e75fb4c5 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -1590,11 +1590,22 @@ static int validate_displayid(u8 *displayid, int length, int idx);
>  static int drm_edid_block_checksum(const u8 *raw_edid)
>  {
>  	int i;
> -	u8 csum = 0;
> -	for (i = 0; i < EDID_LENGTH; i++)
> +	u8 csum = 0, crc = 0;
> +
> +	for (i = 0; i < EDID_LENGTH - 1; i++)
>  		csum += raw_edid[i];
>  
> -	return csum;
> +	crc = 0x100 - csum;
> +
> +	return crc;
> +}
> +
> +static bool drm_edid_block_checksum_diff(const u8 *raw_edid, u8 real_checksum)
> +{
> +	if (raw_edid[EDID_LENGTH - 1] != real_checksum)
> +		return true;
> +	else
> +		return false;
>  }
>  
>  static bool drm_edid_is_zero(const u8 *in_edid, int length)
> @@ -1652,7 +1663,7 @@ bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid,
>  	}
>  
>  	csum = drm_edid_block_checksum(raw_edid);
> -	if (csum) {
> +	if (drm_edid_block_checksum_diff(raw_edid, csum)) {
>  		if (edid_corrupt)
>  			*edid_corrupt = true;
>  
> @@ -1793,6 +1804,10 @@ static void connector_bad_edid(struct drm_connector *connector,
>  			       u8 *edid, int num_blocks)
>  {
>  	int i;
> +	u8 num_of_ext = edid[0x7e];
> +
> +	/* Calculate real checksum for the last edid extension block data */
> +	connector->real_edid_checksum = drm_edid_block_checksum(edid + num_of_ext * EDID_LENGTH);
>  
>  	if (connector->bad_edid_counter++ && !drm_debug_enabled(DRM_UT_KMS))
>  		return;
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 2113500b4075..b3815371c271 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -1357,6 +1357,12 @@ struct drm_connector {
>  	 * rev1.1 4.2.2.6
>  	 */
>  	bool edid_corrupt;
> +	/**
> +	 * @real_edid_checksum: real edid checksum for corrupted edid block.
> +	 * Required in Displayport 1.4 compliance testing
> +	 * rev1.1 4.2.2.6
> +	 */
> +	u8 real_edid_checksum;
>  
>  	/** @debugfs_entry: debugfs directory for this connector */
>  	struct dentry *debugfs_entry;
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index 127d6e1d3338..957a3d00ee05 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -1459,6 +1459,9 @@ static inline ssize_t drm_dp_dpcd_writeb(struct drm_dp_aux *aux,
>  int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux,
>  				 u8 status[DP_LINK_STATUS_SIZE]);
>  
> +bool drm_dp_send_real_edid_checksum(struct drm_dp_aux *aux,
> +				    u8 real_edid_checksum);
> +
>  int drm_dp_downstream_max_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
>  				const u8 port_cap[4]);
>  int drm_dp_downstream_max_bpc(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
> 
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

  reply	other threads:[~2020-02-05 16:03 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-05 15:22 [PATCH V6] drm: Add support for DP 1.4 Compliance edid corruption test Jerry (Fangzhi) Zuo
2020-02-05 16:03 ` Harry Wentland [this message]
2020-02-07 20:46 ` Rodrigo Siqueira

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ce8ecfd7-1edb-ec8b-c9c8-275072882537@amd.com \
    --to=hwentlan@amd.com \
    --cc=Alexander.Deucher@amd.com \
    --cc=Jerry.Zuo@amd.com \
    --cc=amd-gfx@lists.freedesktop.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=harry.wentland@amd.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@linux.intel.com \
    --cc=manasi.d.navare@intel.com \
    --cc=nicholas.kazlauskas@amd.com \
    --cc=rodrigo.siqueira@amd.com \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).