ath10k.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Rakesh Pillai <pillair@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: Rakesh Pillai <pillair@codeaurora.org>,
	linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/2] ath10k: Pause the tx queues when firmware is down
Date: Sat, 27 Jun 2020 00:23:52 +0530	[thread overview]
Message-ID: <1593197633-9014-2-git-send-email-pillair@codeaurora.org> (raw)
In-Reply-To: <1593197633-9014-1-git-send-email-pillair@codeaurora.org>

When the FW goes down, the transmission of
packets cannot be done. Currently we are not
pausing the tx queues, hence there will be too
many attempts to trasmit packets and each of
them resulting in failure and thereby logging
unwanted failure messages onto the console,
as shown below

[   60.842192] ath10k_snoc 18800000.wifi: failed to transmit packet, dropping: -108
[   60.850181] ath10k_snoc 18800000.wifi: failed to submit frame: -108
[   60.857058] ath10k_snoc 18800000.wifi: failed to push frame: -108
[   60.936217] ath10k_snoc 18800000.wifi: failed to transmit packet, dropping: -108
[   60.944496] ath10k_snoc 18800000.wifi: failed to submit frame: -108
[   60.951265] ath10k_snoc 18800000.wifi: failed to push frame: -108
[   61.976589] ath10k_snoc 18800000.wifi: failed to transmit packet, dropping: -108

Stop the tx queues when the wlan firmware is
down and also remove the unwanted duplicate/extra
logging in the packet transmission path.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/core.h |  1 +
 drivers/net/wireless/ath/ath10k/mac.c  | 18 ++++++++++--------
 drivers/net/wireless/ath/ath10k/snoc.c |  3 +++
 3 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 62b1502..040053a 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -900,6 +900,7 @@ static inline const char *ath10k_scan_state_str(enum ath10k_scan_state state)
 
 enum ath10k_tx_pause_reason {
 	ATH10K_TX_PAUSE_Q_FULL,
+	ATH10K_TX_PAUSE_FW_DOWN,
 	ATH10K_TX_PAUSE_MAX,
 };
 
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 3e38962..dc7befc 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3348,6 +3348,7 @@ void ath10k_mac_tx_lock(struct ath10k *ar, int reason)
 	ar->tx_paused |= BIT(reason);
 	ieee80211_stop_queues(ar->hw);
 }
+EXPORT_SYMBOL(ath10k_mac_tx_lock);
 
 static void ath10k_mac_tx_unlock_iter(void *data, u8 *mac,
 				      struct ieee80211_vif *vif)
@@ -3378,6 +3379,7 @@ void ath10k_mac_tx_unlock(struct ath10k *ar, int reason)
 
 	ieee80211_wake_queue(ar->hw, ar->hw->offchannel_tx_hw_queue);
 }
+EXPORT_SYMBOL(ath10k_mac_tx_unlock);
 
 void ath10k_mac_vif_tx_lock(struct ath10k_vif *arvif, int reason)
 {
@@ -3748,11 +3750,8 @@ static int ath10k_mac_tx_submit(struct ath10k *ar,
 		break;
 	}
 
-	if (ret) {
-		ath10k_warn(ar, "failed to transmit packet, dropping: %d\n",
-			    ret);
+	if (ret)
 		ieee80211_free_txskb(ar->hw, skb);
-	}
 
 	return ret;
 }
@@ -3806,10 +3805,8 @@ static int ath10k_mac_tx(struct ath10k *ar,
 	}
 
 	ret = ath10k_mac_tx_submit(ar, txmode, txpath, skb);
-	if (ret) {
-		ath10k_warn(ar, "failed to submit frame: %d\n", ret);
+	if (ret)
 		return ret;
-	}
 
 	return 0;
 }
@@ -4441,7 +4438,12 @@ static void ath10k_mac_op_tx(struct ieee80211_hw *hw,
 
 	ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb, false);
 	if (ret) {
-		ath10k_warn(ar, "failed to transmit frame: %d\n", ret);
+		if (ret == -ESHUTDOWN)
+			ath10k_dbg(ar, ATH10K_DBG_MAC, "failed to transmit frame: %d\n",
+				   ret);
+		else
+			ath10k_warn(ar, "failed to transmit frame: %d\n", ret);
+
 		if (is_htt) {
 			spin_lock_bh(&ar->htt.tx_lock);
 			ath10k_htt_tx_dec_pending(htt);
diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index 407a074..8440e64 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -20,6 +20,7 @@
 #include "hif.h"
 #include "htc.h"
 #include "snoc.h"
+#include "mac.h"
 
 #define ATH10K_SNOC_RX_POST_RETRY_MS 50
 #define CE_POLL_PIPE 4
@@ -1296,6 +1297,7 @@ int ath10k_snoc_fw_indication(struct ath10k *ar, u64 type)
 	switch (type) {
 	case ATH10K_QMI_EVENT_FW_READY_IND:
 		if (test_bit(ATH10K_SNOC_FLAG_REGISTERED, &ar_snoc->flags)) {
+			ath10k_mac_tx_unlock(ar, ATH10K_TX_PAUSE_FW_DOWN);
 			queue_work(ar->workqueue, &ar->restart_work);
 			break;
 		}
@@ -1313,6 +1315,7 @@ int ath10k_snoc_fw_indication(struct ath10k *ar, u64 type)
 	case ATH10K_QMI_EVENT_FW_DOWN_IND:
 		set_bit(ATH10K_SNOC_FLAG_RECOVERY, &ar_snoc->flags);
 		set_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags);
+		ath10k_mac_tx_lock(ar, ATH10K_TX_PAUSE_FW_DOWN);
 		break;
 	default:
 		ath10k_err(ar, "invalid fw indication: %llx\n", type);
-- 
2.7.4


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  reply	other threads:[~2020-06-26 18:54 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-26 18:53 [PATCH v2 0/2] ath10k: Fixes during subsystem recovery Rakesh Pillai
2020-06-26 18:53 ` Rakesh Pillai [this message]
2020-06-26 18:53 ` [PATCH v2 2/2] ath10k: Skip wait for delete response if firmware is down Rakesh Pillai
2020-09-15  7:47 ` [PATCH v2 0/2] ath10k: Fixes during subsystem recovery Rakesh Pillai
2020-09-15 14:28   ` Kalle Valo
2020-12-21 18:37 ` Kalle Valo
2021-01-15 13:25   ` Rakesh Pillai
2021-02-26 14:40   ` Rakesh Pillai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1593197633-9014-2-git-send-email-pillair@codeaurora.org \
    --to=pillair@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --subject='Re: [PATCH v2 1/2] ath10k: Pause the tx queues when firmware is down' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).