From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from s3.sipsolutions.net ([5.9.151.49] helo=sipsolutions.net) by bombadil.infradead.org with esmtps (Exim 4.85_2 #1 (Red Hat Linux)) id 1beNpl-000163-ER for ath10k@lists.infradead.org; Mon, 29 Aug 2016 14:46:48 +0000 From: Benjamin Berg Subject: [PATCHv3 1/5] ath10k: Move ath10k_hw_params definition to hw.h Date: Mon, 29 Aug 2016 16:45:53 +0200 Message-Id: <20160829144557.11678-2-benjamin@sipsolutions.net> In-Reply-To: <20160829144557.11678-1-benjamin@sipsolutions.net> References: <20160829144557.11678-1-benjamin@sipsolutions.net> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: ath10k@lists.infradead.org Cc: Vasanthakumar Thiagarajan , Mathias Kretschmer , Michal Kazior , Sebastian Gottschall , Simon Wunderlich From: Vasanthakumar Thiagarajan This is to prepare for rx descriptor abstraction where we'll be dereferencing ath10k_hw_params member in hw.h. Moreover hw.h looks more suitable to house ath10k_hw_params definition than core.h Signed-off-by: Vasanthakumar Thiagarajan --- drivers/net/wireless/ath/ath10k/core.h | 48 +--------------------------------- drivers/net/wireless/ath/ath10k/hw.h | 48 ++++++++++++++++++++++++++++++++++ 2 files changed, 49 insertions(+), 47 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 30ae5bf..5ace413 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -715,53 +715,7 @@ struct ath10k { struct ath10k_htc htc; struct ath10k_htt htt; - struct ath10k_hw_params { - u32 id; - u16 dev_id; - const char *name; - u32 patch_load_addr; - int uart_pin; - u32 otp_exe_param; - - /* Type of hw cycle counter wraparound logic, for more info - * refer enum ath10k_hw_cc_wraparound_type. - */ - enum ath10k_hw_cc_wraparound_type cc_wraparound_type; - - /* Some of chip expects fragment descriptor to be continuous - * memory for any TX operation. Set continuous_frag_desc flag - * for the hardware which have such requirement. - */ - bool continuous_frag_desc; - - /* CCK hardware rate table mapping for the newer chipsets - * like QCA99X0, QCA4019 got revised. The CCK h/w rate values - * are in a proper order with respect to the rate/preamble - */ - bool cck_rate_map_rev2; - - u32 channel_counters_freq_hz; - - /* Mgmt tx descriptors threshold for limiting probe response - * frames. - */ - u32 max_probe_resp_desc_thres; - - /* The padding bytes's location is different on various chips */ - enum ath10k_hw_4addr_pad hw_4addr_pad; - - u32 tx_chain_mask; - u32 rx_chain_mask; - u32 max_spatial_stream; - u32 cal_data_len; - - struct ath10k_hw_params_fw { - const char *dir; - const char *board; - size_t board_size; - size_t board_ext_size; - } fw; - } hw_params; + struct ath10k_hw_params hw_params; /* contains the firmware images used with ATH10K_FIRMWARE_MODE_NORMAL */ struct ath10k_fw_components normal_mode_fw; diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index e014cd7..1315557 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -363,6 +363,54 @@ enum ath10k_hw_cc_wraparound_type { ATH10K_HW_CC_WRAP_SHIFTED_EACH = 2, }; +struct ath10k_hw_params { + u32 id; + u16 dev_id; + const char *name; + u32 patch_load_addr; + int uart_pin; + u32 otp_exe_param; + + /* Type of hw cycle counter wraparound logic, for more info + * refer enum ath10k_hw_cc_wraparound_type. + */ + enum ath10k_hw_cc_wraparound_type cc_wraparound_type; + + /* Some of chip expects fragment descriptor to be continuous + * memory for any TX operation. Set continuous_frag_desc flag + * for the hardware which have such requirement. + */ + bool continuous_frag_desc; + + /* CCK hardware rate table mapping for the newer chipsets + * like QCA99X0, QCA4019 got revised. The CCK h/w rate values + * are in a proper order with respect to the rate/preamble + */ + bool cck_rate_map_rev2; + + u32 channel_counters_freq_hz; + + /* Mgmt tx descriptors threshold for limiting probe response + * frames. + */ + u32 max_probe_resp_desc_thres; + + /* The padding bytes's location is different on various chips */ + enum ath10k_hw_4addr_pad hw_4addr_pad; + + u32 tx_chain_mask; + u32 rx_chain_mask; + u32 max_spatial_stream; + u32 cal_data_len; + + struct ath10k_hw_params_fw { + const char *dir; + const char *board; + size_t board_size; + size_t board_ext_size; + } fw; +}; + /* Target specific defines for MAIN firmware */ #define TARGET_NUM_VDEVS 8 #define TARGET_NUM_PEER_AST 2 -- 2.9.3 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k