* [PATCH AUTOSEL 5.7 002/274] ath10k: Fix the race condition in firmware dump work queue
[not found] <20200608230607.3361041-1-sashal@kernel.org>
@ 2020-06-08 23:01 ` Sasha Levin
2020-06-08 23:02 ` [PATCH AUTOSEL 5.7 031/274] ath10k: remove the max_sched_scan_reqs value Sasha Levin
` (5 subsequent siblings)
6 siblings, 0 replies; 7+ messages in thread
From: Sasha Levin @ 2020-06-08 23:01 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Maharaja Kennadyrajan, Govindaraj Saminathan, Sasha Levin,
netdev, linux-wireless, ath10k, Kalle Valo
From: Maharaja Kennadyrajan <mkenna@codeaurora.org>
[ Upstream commit 3d1c60460fb2823a19ead9e6ec8f184dd7271aa7 ]
There is a race condition, when the user writes 'hw-restart' and
'hard' in the simulate_fw_crash debugfs file without any delay.
In the above scenario, the firmware dump work queue(scheduled by
'hard') should be handled gracefully, while the target is in the
'hw-restart'.
Tested HW: QCA9984
Tested FW: 10.4-3.9.0.2-00044
Co-developed-by: Govindaraj Saminathan <gsamin@codeaurora.org>
Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org>
Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1585213077-28439-1-git-send-email-mkenna@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/pci.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index ded7a220a4aa..cd1c5d60261f 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2074,6 +2074,7 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
ath10k_pci_irq_sync(ar);
napi_synchronize(&ar->napi);
napi_disable(&ar->napi);
+ cancel_work_sync(&ar_pci->dump_work);
/* Most likely the device has HTT Rx ring configured. The only way to
* prevent the device from accessing (and possible corrupting) host
--
2.25.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH AUTOSEL 5.7 031/274] ath10k: remove the max_sched_scan_reqs value
[not found] <20200608230607.3361041-1-sashal@kernel.org>
2020-06-08 23:01 ` [PATCH AUTOSEL 5.7 002/274] ath10k: Fix the race condition in firmware dump work queue Sasha Levin
@ 2020-06-08 23:02 ` Sasha Levin
2020-06-08 23:03 ` [PATCH AUTOSEL 5.7 092/274] ath10k: fix kernel null pointer dereference Sasha Levin
` (4 subsequent siblings)
6 siblings, 0 replies; 7+ messages in thread
From: Sasha Levin @ 2020-06-08 23:02 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, netdev, linux-wireless, ath10k, Wen Gong, Kalle Valo
From: Wen Gong <wgong@codeaurora.org>
[ Upstream commit d431f8939c1419854dfe89dd345387f5397c6edd ]
The struct cfg80211_wowlan of NET_DETECT WoWLAN feature share the same
struct cfg80211_sched_scan_request together with scheduled scan request
feature, and max_sched_scan_reqs of wiphy is only used for sched scan,
and ath10k does not support scheduled scan request feature, so ath10k
does not set flag NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR, but ath10k
set max_sched_scan_reqs of wiphy to a non zero value 1, then function
nl80211_add_commands_unsplit of cfg80211 will set it support command
NL80211_CMD_START_SCHED_SCAN because max_sched_scan_reqs is a non zero
value, but actually ath10k not support it, then it leads a mismatch result
for sched scan of cfg80211, then application shill found the mismatch and
stop running case of MAC random address scan and then the case fail.
After remove max_sched_scan_reqs value, it keeps match for sched scan and
case of MAC random address scan pass.
Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.
Tested with QCA6174 PCIe with firmware WLAN.RM.4.4.1-00110-QCARMSWP-1.
Fixes: ce834e280f2f875 ("ath10k: support NET_DETECT WoWLAN feature")
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20191114050001.4658-1-wgong@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/mac.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 2d03b8dd3b8c..7c4ba17a0b68 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -8919,7 +8919,6 @@ int ath10k_mac_register(struct ath10k *ar)
ar->hw->wiphy->max_scan_ie_len = WLAN_SCAN_PARAMS_MAX_IE_LEN;
if (test_bit(WMI_SERVICE_NLO, ar->wmi.svc_map)) {
- ar->hw->wiphy->max_sched_scan_reqs = 1;
ar->hw->wiphy->max_sched_scan_ssids = WMI_PNO_MAX_SUPP_NETWORKS;
ar->hw->wiphy->max_match_sets = WMI_PNO_MAX_SUPP_NETWORKS;
ar->hw->wiphy->max_sched_scan_ie_len = WMI_PNO_MAX_IE_LENGTH;
--
2.25.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH AUTOSEL 5.7 092/274] ath10k: fix kernel null pointer dereference
[not found] <20200608230607.3361041-1-sashal@kernel.org>
2020-06-08 23:01 ` [PATCH AUTOSEL 5.7 002/274] ath10k: Fix the race condition in firmware dump work queue Sasha Levin
2020-06-08 23:02 ` [PATCH AUTOSEL 5.7 031/274] ath10k: remove the max_sched_scan_reqs value Sasha Levin
@ 2020-06-08 23:03 ` Sasha Levin
2020-06-08 23:03 ` [PATCH AUTOSEL 5.7 113/274] ath10k: add flush tx packets for SDIO chip Sasha Levin
` (3 subsequent siblings)
6 siblings, 0 replies; 7+ messages in thread
From: Sasha Levin @ 2020-06-08 23:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, netdev, Venkateswara Naralasetty, linux-wireless,
ath10k, Kalle Valo
From: Venkateswara Naralasetty <vnaralas@codeaurora.org>
[ Upstream commit acb31476adc9ff271140cdd4d3c707ff0c97f5a4 ]
Currently sta airtime is updated without any lock in case of
host based airtime calculation. Which may result in accessing the
invalid sta pointer in case of continuous station connect/disconnect.
This patch fix the kernel null pointer dereference by updating the
station airtime with proper RCU lock in case of host based airtime
calculation.
Proceeding with the analysis of "ARM Kernel Panic".
The APSS crash happened due to OOPS on CPU 0.
Crash Signature : Unable to handle kernel NULL pointer dereference
at virtual address 00000300
During the crash,
PC points to "ieee80211_sta_register_airtime+0x1c/0x448 [mac80211]"
LR points to "ath10k_txrx_tx_unref+0x17c/0x364 [ath10k_core]".
The Backtrace obtained is as follows:
[<bf880238>] (ieee80211_sta_register_airtime [mac80211]) from
[<bf945a38>] (ath10k_txrx_tx_unref+0x17c/0x364 [ath10k_core])
[<bf945a38>] (ath10k_txrx_tx_unref [ath10k_core]) from
[<bf9428e4>] (ath10k_htt_txrx_compl_task+0xa50/0xfc0 [ath10k_core])
[<bf9428e4>] (ath10k_htt_txrx_compl_task [ath10k_core]) from
[<bf9b9bc8>] (ath10k_pci_napi_poll+0x50/0xf8 [ath10k_pci])
[<bf9b9bc8>] (ath10k_pci_napi_poll [ath10k_pci]) from
[<c059e3b0>] (net_rx_action+0xac/0x160)
[<c059e3b0>] (net_rx_action) from [<c02329a4>] (__do_softirq+0x104/0x294)
[<c02329a4>] (__do_softirq) from [<c0232b64>] (run_ksoftirqd+0x30/0x90)
[<c0232b64>] (run_ksoftirqd) from [<c024e358>] (smpboot_thread_fn+0x25c/0x274)
[<c024e358>] (smpboot_thread_fn) from [<c02482fc>] (kthread+0xd8/0xec)
Tested HW: QCA9888
Tested FW: 10.4-3.10-00047
Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1585736290-17661-1-git-send-email-vnaralas@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/txrx.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 39abf8b12903..f46b9083bbf1 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -84,9 +84,11 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
wake_up(&htt->empty_tx_wq);
spin_unlock_bh(&htt->tx_lock);
+ rcu_read_lock();
if (txq && txq->sta && skb_cb->airtime_est)
ieee80211_sta_register_airtime(txq->sta, txq->tid,
skb_cb->airtime_est, 0);
+ rcu_read_unlock();
if (ar->bus_param.dev_type != ATH10K_DEV_TYPE_HL)
dma_unmap_single(dev, skb_cb->paddr, msdu->len, DMA_TO_DEVICE);
--
2.25.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH AUTOSEL 5.7 113/274] ath10k: add flush tx packets for SDIO chip
[not found] <20200608230607.3361041-1-sashal@kernel.org>
` (2 preceding siblings ...)
2020-06-08 23:03 ` [PATCH AUTOSEL 5.7 092/274] ath10k: fix kernel null pointer dereference Sasha Levin
@ 2020-06-08 23:03 ` Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 156/274] ath10k: fix possible memory leak in ath10k_bmi_lz_data_large() Sasha Levin
` (2 subsequent siblings)
6 siblings, 0 replies; 7+ messages in thread
From: Sasha Levin @ 2020-06-08 23:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, netdev, linux-wireless, ath10k, Wen Gong, Kalle Valo
From: Wen Gong <wgong@codeaurora.org>
[ Upstream commit dd7fc5545bbafdbd6c1efdc996b61883b285bdc5 ]
When station connected to AP, and run TX traffic such as TCP/UDP, and
system enter suspend state, then mac80211 call ath10k_flush with set
drop flag, recently it only send wmi peer flush to firmware and
firmware will flush all pending TX packets, for PCIe, firmware will
indicate the TX packets status to ath10k, and then ath10k indicate to
mac80211 TX complete with the status, then all the packets has been
flushed at this moment. For SDIO chip, it is different, its TX
complete indication is disabled by default, and it has a tx queue in
ath10k, and its tx credit control is enabled, total tx credit is 96,
when its credit is not sufficient, then the packets will buffered in
the tx queue of ath10k, max packets is TARGET_TLV_NUM_MSDU_DESC_HL
which is 1024, for SDIO, when mac80211 call ath10k_flush with set drop
flag, maybe it have pending packets in tx queue of ath10k, and if it
does not have sufficient tx credit, the packets will stay in queue
untill tx credit report from firmware, if it is a noisy environment,
tx speed is low and the tx credit report from firmware will delay more
time, then the num_pending_tx will remain > 0 untill all packets send
to firmware. After the 1st ath10k_flush, mac80211 will call the 2nd
ath10k_flush without set drop flag immediately, then it will call to
ath10k_mac_wait_tx_complete, and it wait untill num_pending_tx become
to 0, in noisy environment, it is esay to wait about near 5 seconds,
then it cause the suspend take long time.
1st and 2nd callstack of ath10k_flush
[ 303.740427] ath10k_sdio mmc1:0001:1: ath10k_flush drop:1, pending:0-0
[ 303.740495] ------------[ cut here ]------------
[ 303.740739] WARNING: CPU: 1 PID: 3921 at /mnt/host/source/src/third_party/kernel/v4.19/drivers/net/wireless/ath/ath10k/mac.c:7025 ath10k_flush+0x54/0x104 [ath10k_core]
[ 303.740757] Modules linked in: bridge stp llc ath10k_sdio ath10k_core rfcomm uinput cros_ec_rpmsg mtk_seninf mtk_cam_isp mtk_vcodec_enc mtk_fd mtk_vcodec_dec mtk_vcodec_common mtk_dip mtk_mdp3 videobuf2_dma_contig videobuf2_memops v4l2_mem2mem videobuf2_v4l2 videobuf2_common hid_google_hammer hci_uart btqca bluetooth dw9768 ov8856 ecdh_generic ov02a10 v4l2_fwnode mtk_scp mtk_rpmsg rpmsg_core mtk_scp_ipi ipt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring cros_ec_sensors_sync cros_ec_light_prox cros_ec_sensors industrialio_triggered_buffer
[ 303.740914] kfifo_buf cros_ec_activity cros_ec_sensors_core lzo_rle lzo_compress ath mac80211 zram cfg80211 joydev [last unloaded: ath10k_core]
[ 303.741009] CPU: 1 PID: 3921 Comm: kworker/u16:10 Tainted: G W 4.19.95 #2
[ 303.741027] Hardware name: MediaTek krane sku176 board (DT)
[ 303.741061] Workqueue: events_unbound async_run_entry_fn
[ 303.741086] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 303.741166] pc : ath10k_flush+0x54/0x104 [ath10k_core]
[ 303.741244] lr : ath10k_flush+0x54/0x104 [ath10k_core]
[ 303.741260] sp : ffffffdf080e77a0
[ 303.741276] x29: ffffffdf080e77a0 x28: ffffffdef3730040
[ 303.741300] x27: ffffff907c2240a0 x26: ffffffde6ff39afc
[ 303.741321] x25: ffffffdef3730040 x24: ffffff907bf61018
[ 303.741343] x23: ffffff907c2240a0 x22: ffffffde6ff39a50
[ 303.741364] x21: 0000000000000001 x20: ffffffde6ff39a50
[ 303.741385] x19: ffffffde6bac2420 x18: 0000000000017200
[ 303.741407] x17: ffffff907c24a000 x16: 0000000000000037
[ 303.741428] x15: ffffff907b49a568 x14: ffffff907cf332c1
[ 303.741476] x13: 00000000000922e4 x12: 0000000000000000
[ 303.741497] x11: 0000000000000001 x10: 0000000000000007
[ 303.741518] x9 : f2256b8c1de4bc00 x8 : f2256b8c1de4bc00
[ 303.741539] x7 : ffffff907ab5e764 x6 : 0000000000000000
[ 303.741560] x5 : 0000000000000080 x4 : 0000000000000001
[ 303.741582] x3 : ffffffdf080e74a8 x2 : ffffff907aa91244
[ 303.741603] x1 : ffffffdf080e74a8 x0 : 0000000000000024
[ 303.741624] Call trace:
[ 303.741701] ath10k_flush+0x54/0x104 [ath10k_core]
[ 303.741941] __ieee80211_flush_queues+0x1dc/0x358 [mac80211]
[ 303.742098] ieee80211_flush_queues+0x34/0x44 [mac80211]
[ 303.742253] ieee80211_set_disassoc+0xc0/0x5ec [mac80211]
[ 303.742399] ieee80211_mgd_deauth+0x720/0x7d4 [mac80211]
[ 303.742535] ieee80211_deauth+0x24/0x30 [mac80211]
[ 303.742720] cfg80211_mlme_deauth+0x250/0x3bc [cfg80211]
[ 303.742849] cfg80211_mlme_down+0x90/0xd0 [cfg80211]
[ 303.742971] cfg80211_disconnect+0x340/0x3a0 [cfg80211]
[ 303.743087] __cfg80211_leave+0xe4/0x17c [cfg80211]
[ 303.743203] cfg80211_leave+0x38/0x50 [cfg80211]
[ 303.743319] wiphy_suspend+0x84/0x5bc [cfg80211]
[ 303.743335] dpm_run_callback+0x170/0x304
[ 303.743346] __device_suspend+0x2dc/0x3e8
[ 303.743356] async_suspend+0x2c/0xb0
[ 303.743370] async_run_entry_fn+0x48/0xf8
[ 303.743383] process_one_work+0x304/0x604
[ 303.743394] worker_thread+0x248/0x3f4
[ 303.743403] kthread+0x120/0x130
[ 303.743416] ret_from_fork+0x10/0x18
[ 303.743812] ath10k_sdio mmc1:0001:1: ath10k_flush drop:0, pending:0-0
[ 303.743858] ------------[ cut here ]------------
[ 303.744057] WARNING: CPU: 1 PID: 3921 at /mnt/host/source/src/third_party/kernel/v4.19/drivers/net/wireless/ath/ath10k/mac.c:7025 ath10k_flush+0x54/0x104 [ath10k_core]
[ 303.744075] Modules linked in: bridge stp llc ath10k_sdio ath10k_core rfcomm uinput cros_ec_rpmsg mtk_seninf mtk_cam_isp mtk_vcodec_enc mtk_fd mtk_vcodec_dec mtk_vcodec_common mtk_dip mtk_mdp3 videobuf2_dma_contig videobuf2_memops v4l2_mem2mem videobuf2_v4l2 videobuf2_common hid_google_hammer hci_uart btqca bluetooth dw9768 ov8856 ecdh_generic ov02a10 v4l2_fwnode mtk_scp mtk_rpmsg rpmsg_core mtk_scp_ipi ipt_MASQUERADE fuse iio_trig_sysfs cros_ec_sensors_ring cros_ec_sensors_sync cros_ec_light_prox cros_ec_sensors industrialio_triggered_buffer kfifo_buf cros_ec_activity cros_ec_sensors_core lzo_rle lzo_compress ath mac80211 zram cfg80211 joydev [last unloaded: ath10k_core]
[ 303.744256] CPU: 1 PID: 3921 Comm: kworker/u16:10 Tainted: G W 4.19.95 #2
[ 303.744273] Hardware name: MediaTek krane sku176 board (DT)
[ 303.744301] Workqueue: events_unbound async_run_entry_fn
[ 303.744325] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 303.744403] pc : ath10k_flush+0x54/0x104 [ath10k_core]
[ 303.744480] lr : ath10k_flush+0x54/0x104 [ath10k_core]
[ 303.744496] sp : ffffffdf080e77a0
[ 303.744512] x29: ffffffdf080e77a0 x28: ffffffdef3730040
[ 303.744534] x27: ffffff907c2240a0 x26: ffffffde6ff39afc
[ 303.744556] x25: ffffffdef3730040 x24: ffffff907bf61018
[ 303.744577] x23: ffffff907c2240a0 x22: ffffffde6ff39a50
[ 303.744598] x21: 0000000000000000 x20: ffffffde6ff39a50
[ 303.744620] x19: ffffffde6bac2420 x18: 000000000001831c
[ 303.744641] x17: ffffff907c24a000 x16: 0000000000000037
[ 303.744662] x15: ffffff907b49a568 x14: ffffff907cf332c1
[ 303.744683] x13: 00000000000922ea x12: 0000000000000000
[ 303.744704] x11: 0000000000000001 x10: 0000000000000007
[ 303.744747] x9 : f2256b8c1de4bc00 x8 : f2256b8c1de4bc00
[ 303.744768] x7 : ffffff907ab5e764 x6 : 0000000000000000
[ 303.744789] x5 : 0000000000000080 x4 : 0000000000000001
[ 303.744810] x3 : ffffffdf080e74a8 x2 : ffffff907aa91244
[ 303.744831] x1 : ffffffdf080e74a8 x0 : 0000000000000024
[ 303.744853] Call trace:
[ 303.744929] ath10k_flush+0x54/0x104 [ath10k_core]
[ 303.745098] __ieee80211_flush_queues+0x1dc/0x358 [mac80211]
[ 303.745277] ieee80211_flush_queues+0x34/0x44 [mac80211]
[ 303.745424] ieee80211_set_disassoc+0x108/0x5ec [mac80211]
[ 303.745569] ieee80211_mgd_deauth+0x720/0x7d4 [mac80211]
[ 303.745706] ieee80211_deauth+0x24/0x30 [mac80211]
[ 303.745853] cfg80211_mlme_deauth+0x250/0x3bc [cfg80211]
[ 303.745979] cfg80211_mlme_down+0x90/0xd0 [cfg80211]
[ 303.746103] cfg80211_disconnect+0x340/0x3a0 [cfg80211]
[ 303.746219] __cfg80211_leave+0xe4/0x17c [cfg80211]
[ 303.746335] cfg80211_leave+0x38/0x50 [cfg80211]
[ 303.746452] wiphy_suspend+0x84/0x5bc [cfg80211]
[ 303.746467] dpm_run_callback+0x170/0x304
[ 303.746477] __device_suspend+0x2dc/0x3e8
[ 303.746487] async_suspend+0x2c/0xb0
[ 303.746498] async_run_entry_fn+0x48/0xf8
[ 303.746510] process_one_work+0x304/0x604
[ 303.746521] worker_thread+0x248/0x3f4
[ 303.746530] kthread+0x120/0x130
[ 303.746542] ret_from_fork+0x10/0x18
one sample's debugging log: it wait 3190 ms(5000 - 1810).
1st ath10k_flush, it has 120 packets in tx queue of ath10k:
<...>-1513 [000] .... 25374.786005: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_flush drop:1, pending:120-0
<...>-1513 [000] ...1 25374.788375: ath10k_log_warn: ath10k_sdio mmc1:0001:1 ath10k_htt_tx_mgmt_inc_pending htt->num_pending_mgmt_tx:0
<...>-1500 [001] .... 25374.790143: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:121
2st ath10k_flush, it has 121 packets in tx queue of ath10k:
<...>-1513 [000] .... 25374.790571: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_flush drop:0, pending:121-0
<...>-1513 [000] .... 25374.791990: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_mac_wait_tx_complete state:1 pending:121-0
<...>-1508 [001] .... 25374.792696: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:46
<...>-1508 [001] .... 25374.792700: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:46
<...>-1508 [001] .... 25374.792729: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:121
<...>-1508 [001] .... 25374.792937: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:88, count:32, len:49792
<...>-1508 [001] .... 25374.793031: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:75, count:14, len:21784
kworker/u16:0-25773 [003] .... 25374.793701: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:46
<...>-1881 [000] .... 25375.073178: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:24
<...>-1881 [000] .... 25375.073182: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:24
<...>-1881 [000] .... 25375.073429: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:75
<...>-1879 [001] .... 25375.074090: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:24
<...>-1881 [000] .... 25375.074123: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:51, count:24, len:37344
<...>-1879 [001] .... 25375.270126: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:26
<...>-1879 [001] .... 25375.270130: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:26
<...>-1488 [000] .... 25375.270174: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:51
<...>-1488 [000] .... 25375.270529: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:25, count:26, len:40456
<...>-1879 [001] .... 25375.270693: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:26
<...>-1488 [001] .... 25377.775885: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:12
<...>-1488 [001] .... 25377.775890: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:12
<...>-1488 [001] .... 25377.775933: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:25
<...>-1488 [001] .... 25377.776059: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:13, count:12, len:18672
<...>-1879 [001] .... 25377.776100: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:12
<...>-1488 [001] .... 25377.878079: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:15
<...>-1488 [001] .... 25377.878087: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:15
<...>-1879 [000] .... 25377.878323: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:13
<...>-1879 [000] .... 25377.878487: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx status:0, eid:1, req count:0, count:13, len:20228
<...>-1879 [000] .... 25377.878497: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx complete, eid:1, pending complete count:13
<...>-1488 [001] .... 25377.919927: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit update: delta:11
<...>-1488 [001] .... 25377.919932: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 credit total:13
<...>-1488 [001] .... 25377.919976: ath10k_log_dbg: ath10k_sdio mmc1:0001:1 bundle tx work, eid:1, count:0
<...>-1881 [000] .... 25377.982645: ath10k_log_warn: ath10k_sdio mmc1:0001:1 HTT_T2H_MSG_TYPE_MGMT_TX_COMPLETION status:0
<...>-1513 [001] .... 25377.982973: ath10k_log_err: ath10k_sdio mmc1:0001:1 ath10k_mac_wait_tx_complete time_left:1810, pending:0-0
Flush all pending TX packets for the 1st ath10k_flush reduced the wait
time of the 2nd ath10k_flush and then suspend take short time.
This Patch only effect SDIO chips.
Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200415233730.10581-1-wgong@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/htt.h | 7 +++++++
drivers/net/wireless/ath/ath10k/htt_tx.c | 8 +++++++-
drivers/net/wireless/ath/ath10k/mac.c | 1 +
3 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index 4a12564fc30e..c5ac5b277017 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -2035,6 +2035,7 @@ struct ath10k_htt_tx_ops {
int (*htt_h2t_aggr_cfg_msg)(struct ath10k_htt *htt,
u8 max_subfrms_ampdu,
u8 max_subfrms_amsdu);
+ void (*htt_flush_tx)(struct ath10k_htt *htt);
};
static inline int ath10k_htt_send_rx_ring_cfg(struct ath10k_htt *htt)
@@ -2074,6 +2075,12 @@ static inline int ath10k_htt_tx(struct ath10k_htt *htt,
return htt->tx_ops->htt_tx(htt, txmode, msdu);
}
+static inline void ath10k_htt_flush_tx(struct ath10k_htt *htt)
+{
+ if (htt->tx_ops->htt_flush_tx)
+ htt->tx_ops->htt_flush_tx(htt);
+}
+
static inline int ath10k_htt_alloc_txbuff(struct ath10k_htt *htt)
{
if (!htt->tx_ops->htt_alloc_txbuff)
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index e9d12ea708b6..517ee2af2231 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -529,9 +529,14 @@ void ath10k_htt_tx_destroy(struct ath10k_htt *htt)
htt->tx_mem_allocated = false;
}
-void ath10k_htt_tx_stop(struct ath10k_htt *htt)
+static void ath10k_htt_flush_tx_queue(struct ath10k_htt *htt)
{
idr_for_each(&htt->pending_tx, ath10k_htt_tx_clean_up_pending, htt->ar);
+}
+
+void ath10k_htt_tx_stop(struct ath10k_htt *htt)
+{
+ ath10k_htt_flush_tx_queue(htt);
idr_destroy(&htt->pending_tx);
}
@@ -1784,6 +1789,7 @@ static const struct ath10k_htt_tx_ops htt_tx_ops_hl = {
.htt_send_frag_desc_bank_cfg = ath10k_htt_send_frag_desc_bank_cfg_32,
.htt_tx = ath10k_htt_tx_hl,
.htt_h2t_aggr_cfg_msg = ath10k_htt_h2t_aggr_cfg_msg_32,
+ .htt_flush_tx = ath10k_htt_flush_tx_queue,
};
void ath10k_htt_set_tx_ops(struct ath10k_htt *htt)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 7c4ba17a0b68..70331ca9e50e 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7190,6 +7190,7 @@ static void ath10k_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
ath10k_wmi_peer_flush(ar, arvif->vdev_id,
arvif->bssid, bitmap);
}
+ ath10k_htt_flush_tx(&ar->htt);
}
return;
}
--
2.25.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH AUTOSEL 5.7 156/274] ath10k: fix possible memory leak in ath10k_bmi_lz_data_large()
[not found] <20200608230607.3361041-1-sashal@kernel.org>
` (3 preceding siblings ...)
2020-06-08 23:03 ` [PATCH AUTOSEL 5.7 113/274] ath10k: add flush tx packets for SDIO chip Sasha Levin
@ 2020-06-08 23:04 ` Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 184/274] ath10k: Skip handling del_server during driver exit Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 185/274] ath10k: Remove msdu from idr when management pkt send fails Sasha Levin
6 siblings, 0 replies; 7+ messages in thread
From: Sasha Levin @ 2020-06-08 23:04 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, netdev, linux-wireless, ath10k, Wei Yongjun, Kalle Valo
From: Wei Yongjun <weiyongjun1@huawei.com>
[ Upstream commit 2326aa011967f0afbcba7fe1a005d01f8b12900b ]
'cmd' is malloced in ath10k_bmi_lz_data_large() and should be freed
before leaving from the error handling cases, otherwise it will cause
memory leak.
Fixes: d58f466a5dee ("ath10k: add large size for BMI download data for SDIO")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200427104348.13570-1-weiyongjun1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/bmi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/wireless/ath/ath10k/bmi.c b/drivers/net/wireless/ath/ath10k/bmi.c
index ea908107581d..5b6db6e66f65 100644
--- a/drivers/net/wireless/ath/ath10k/bmi.c
+++ b/drivers/net/wireless/ath/ath10k/bmi.c
@@ -380,6 +380,7 @@ static int ath10k_bmi_lz_data_large(struct ath10k *ar, const void *buffer, u32 l
NULL, NULL);
if (ret) {
ath10k_warn(ar, "unable to write to the device\n");
+ kfree(cmd);
return ret;
}
--
2.25.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH AUTOSEL 5.7 184/274] ath10k: Skip handling del_server during driver exit
[not found] <20200608230607.3361041-1-sashal@kernel.org>
` (4 preceding siblings ...)
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 156/274] ath10k: fix possible memory leak in ath10k_bmi_lz_data_large() Sasha Levin
@ 2020-06-08 23:04 ` Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 185/274] ath10k: Remove msdu from idr when management pkt send fails Sasha Levin
6 siblings, 0 replies; 7+ messages in thread
From: Sasha Levin @ 2020-06-08 23:04 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, netdev, linux-wireless, ath10k, Rakesh Pillai, Kalle Valo
From: Rakesh Pillai <pillair@codeaurora.org>
[ Upstream commit 7c6d67b136ceb0aebc7a3153b300e925ed915daf ]
The qmi infrastructure sends the client a del_server
event when the client releases its qmi handle. This
is not the msg indicating the actual qmi server exiting.
In such cases the del_server msg should not be processed,
since the wifi firmware does not reset its qmi state.
Hence skip the processing of del_server event when the
driver is unloading.
Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1
Fixes: ba94c753ccb4 ("ath10k: add QMI message handshake for wcn3990 client")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1588663061-12138-1-git-send-email-pillair@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/qmi.c | 13 ++++++++++++-
drivers/net/wireless/ath/ath10k/qmi.h | 6 ++++++
2 files changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c
index 85dce43c5439..7abdef8d6b9b 100644
--- a/drivers/net/wireless/ath/ath10k/qmi.c
+++ b/drivers/net/wireless/ath/ath10k/qmi.c
@@ -961,7 +961,16 @@ static void ath10k_qmi_del_server(struct qmi_handle *qmi_hdl,
container_of(qmi_hdl, struct ath10k_qmi, qmi_hdl);
qmi->fw_ready = false;
- ath10k_qmi_driver_event_post(qmi, ATH10K_QMI_EVENT_SERVER_EXIT, NULL);
+
+ /*
+ * The del_server event is to be processed only if coming from
+ * the qmi server. The qmi infrastructure sends del_server, when
+ * any client releases the qmi handle. In this case do not process
+ * this del_server event.
+ */
+ if (qmi->state == ATH10K_QMI_STATE_INIT_DONE)
+ ath10k_qmi_driver_event_post(qmi, ATH10K_QMI_EVENT_SERVER_EXIT,
+ NULL);
}
static struct qmi_ops ath10k_qmi_ops = {
@@ -1091,6 +1100,7 @@ int ath10k_qmi_init(struct ath10k *ar, u32 msa_size)
if (ret)
goto err_qmi_lookup;
+ qmi->state = ATH10K_QMI_STATE_INIT_DONE;
return 0;
err_qmi_lookup:
@@ -1109,6 +1119,7 @@ int ath10k_qmi_deinit(struct ath10k *ar)
struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
struct ath10k_qmi *qmi = ar_snoc->qmi;
+ qmi->state = ATH10K_QMI_STATE_DEINIT;
qmi_handle_release(&qmi->qmi_hdl);
cancel_work_sync(&qmi->event_work);
destroy_workqueue(qmi->event_wq);
diff --git a/drivers/net/wireless/ath/ath10k/qmi.h b/drivers/net/wireless/ath/ath10k/qmi.h
index dc257375f161..b59720524224 100644
--- a/drivers/net/wireless/ath/ath10k/qmi.h
+++ b/drivers/net/wireless/ath/ath10k/qmi.h
@@ -83,6 +83,11 @@ struct ath10k_qmi_driver_event {
void *data;
};
+enum ath10k_qmi_state {
+ ATH10K_QMI_STATE_INIT_DONE,
+ ATH10K_QMI_STATE_DEINIT,
+};
+
struct ath10k_qmi {
struct ath10k *ar;
struct qmi_handle qmi_hdl;
@@ -105,6 +110,7 @@ struct ath10k_qmi {
char fw_build_timestamp[MAX_TIMESTAMP_LEN + 1];
struct ath10k_qmi_cal_data cal_data[MAX_NUM_CAL_V01];
bool msa_fixed_perm;
+ enum ath10k_qmi_state state;
};
int ath10k_qmi_wlan_enable(struct ath10k *ar,
--
2.25.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH AUTOSEL 5.7 185/274] ath10k: Remove msdu from idr when management pkt send fails
[not found] <20200608230607.3361041-1-sashal@kernel.org>
` (5 preceding siblings ...)
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 184/274] ath10k: Skip handling del_server during driver exit Sasha Levin
@ 2020-06-08 23:04 ` Sasha Levin
6 siblings, 0 replies; 7+ messages in thread
From: Sasha Levin @ 2020-06-08 23:04 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Sasha Levin, netdev, linux-wireless, ath10k, Rakesh Pillai, Kalle Valo
From: Rakesh Pillai <pillair@codeaurora.org>
[ Upstream commit c730c477176ad4af86d9aae4d360a7ad840b073a ]
Currently when the sending of any management pkt
via wmi command fails, the packet is being unmapped
freed in the error handling. But the idr entry added,
which is used to track these packet is not getting removed.
Hence, during unload, in wmi cleanup, all the entries
in IDR are removed and the corresponding buffer is
attempted to be freed. This can cause a situation where
one packet is attempted to be freed twice.
Fix this error by rmeoving the msdu from the idr
list when the sending of a management packet over
wmi fails.
Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1
Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1588667015-25490-1-git-send-email-pillair@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/mac.c | 3 +++
drivers/net/wireless/ath/ath10k/wmi-ops.h | 10 ++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 15 +++++++++++++++
3 files changed, 28 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 70331ca9e50e..7b60d8d6bfa9 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3921,6 +3921,9 @@ void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work)
if (ret) {
ath10k_warn(ar, "failed to transmit management frame by ref via WMI: %d\n",
ret);
+ /* remove this msdu from idr tracking */
+ ath10k_wmi_cleanup_mgmt_tx_send(ar, skb);
+
dma_unmap_single(ar->dev, paddr, skb->len,
DMA_TO_DEVICE);
ieee80211_free_txskb(ar->hw, skb);
diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h
index 1491c25518bb..edccabc667e8 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-ops.h
+++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h
@@ -133,6 +133,7 @@ struct wmi_ops {
struct sk_buff *(*gen_mgmt_tx_send)(struct ath10k *ar,
struct sk_buff *skb,
dma_addr_t paddr);
+ int (*cleanup_mgmt_tx_send)(struct ath10k *ar, struct sk_buff *msdu);
struct sk_buff *(*gen_dbglog_cfg)(struct ath10k *ar, u64 module_enable,
u32 log_level);
struct sk_buff *(*gen_pktlog_enable)(struct ath10k *ar, u32 filter);
@@ -441,6 +442,15 @@ ath10k_wmi_get_txbf_conf_scheme(struct ath10k *ar)
return ar->wmi.ops->get_txbf_conf_scheme(ar);
}
+static inline int
+ath10k_wmi_cleanup_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu)
+{
+ if (!ar->wmi.ops->cleanup_mgmt_tx_send)
+ return -EOPNOTSUPP;
+
+ return ar->wmi.ops->cleanup_mgmt_tx_send(ar, msdu);
+}
+
static inline int
ath10k_wmi_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu,
dma_addr_t paddr)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 4e68debda9bf..4a3e169965ae 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2897,6 +2897,18 @@ ath10k_wmi_tlv_op_gen_request_stats(struct ath10k *ar, u32 stats_mask)
return skb;
}
+static int
+ath10k_wmi_tlv_op_cleanup_mgmt_tx_send(struct ath10k *ar,
+ struct sk_buff *msdu)
+{
+ struct ath10k_skb_cb *cb = ATH10K_SKB_CB(msdu);
+ struct ath10k_wmi *wmi = &ar->wmi;
+
+ idr_remove(&wmi->mgmt_pending_tx, cb->msdu_id);
+
+ return 0;
+}
+
static int
ath10k_wmi_mgmt_tx_alloc_msdu_id(struct ath10k *ar, struct sk_buff *skb,
dma_addr_t paddr)
@@ -2971,6 +2983,8 @@ ath10k_wmi_tlv_op_gen_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu,
if (desc_id < 0)
goto err_free_skb;
+ cb->msdu_id = desc_id;
+
ptr = (void *)skb->data;
tlv = ptr;
tlv->tag = __cpu_to_le16(WMI_TLV_TAG_STRUCT_MGMT_TX_CMD);
@@ -4419,6 +4433,7 @@ static const struct wmi_ops wmi_tlv_ops = {
.gen_force_fw_hang = ath10k_wmi_tlv_op_gen_force_fw_hang,
/* .gen_mgmt_tx = not implemented; HTT is used */
.gen_mgmt_tx_send = ath10k_wmi_tlv_op_gen_mgmt_tx_send,
+ .cleanup_mgmt_tx_send = ath10k_wmi_tlv_op_cleanup_mgmt_tx_send,
.gen_dbglog_cfg = ath10k_wmi_tlv_op_gen_dbglog_cfg,
.gen_pktlog_enable = ath10k_wmi_tlv_op_gen_pktlog_enable,
.gen_pktlog_disable = ath10k_wmi_tlv_op_gen_pktlog_disable,
--
2.25.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-06-08 23:10 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20200608230607.3361041-1-sashal@kernel.org>
2020-06-08 23:01 ` [PATCH AUTOSEL 5.7 002/274] ath10k: Fix the race condition in firmware dump work queue Sasha Levin
2020-06-08 23:02 ` [PATCH AUTOSEL 5.7 031/274] ath10k: remove the max_sched_scan_reqs value Sasha Levin
2020-06-08 23:03 ` [PATCH AUTOSEL 5.7 092/274] ath10k: fix kernel null pointer dereference Sasha Levin
2020-06-08 23:03 ` [PATCH AUTOSEL 5.7 113/274] ath10k: add flush tx packets for SDIO chip Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 156/274] ath10k: fix possible memory leak in ath10k_bmi_lz_data_large() Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 184/274] ath10k: Skip handling del_server during driver exit Sasha Levin
2020-06-08 23:04 ` [PATCH AUTOSEL 5.7 185/274] ath10k: Remove msdu from idr when management pkt send fails Sasha Levin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).