ath10k.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Marcel Holtmann <marcel@holtmann.org>,
	Johan Hedberg <johan.hedberg@gmail.com>,
	Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
	Kalle Valo <kvalo@codeaurora.org>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: linux-arm-msm@vger.kernel.org, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
	ath10k@lists.infradead.org, linux-wireless@vger.kernel.org,
	netdev@vger.kernel.org
Subject: [RFC PATCH 07/15] Bluetooth: hci_qca: merge qca_power_on with qca_regulators_init
Date: Tue, 17 Aug 2021 03:54:59 +0300	[thread overview]
Message-ID: <20210817005507.1507580-8-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20210817005507.1507580-1-dmitry.baryshkov@linaro.org>

With wcn6750 support added, regulator-based code was extended with the
bt_en gpio support. Now there is no need to keep regulator and
non-regulator code paths separate. Merge both code paths.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/bluetooth/hci_qca.c | 64 ++++++++++++++-----------------------
 1 file changed, 24 insertions(+), 40 deletions(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 279b802f0952..ad7e8cdc94f3 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1583,13 +1583,21 @@ static bool qca_prevent_wake(struct hci_dev *hdev)
 	return !wakeup;
 }
 
-static int qca_regulator_init(struct hci_uart *hu)
+static int qca_power_on(struct hci_dev *hdev)
 {
+	struct hci_uart *hu = hci_get_drvdata(hdev);
 	enum qca_btsoc_type soc_type = qca_soc_type(hu);
 	struct qca_serdev *qcadev;
+	struct qca_data *qca = hu->priv;
 	int ret;
 	bool sw_ctrl_state;
 
+	/* Non-serdev device usually is powered by external power
+	 * and don't need additional action in driver for power on
+	 */
+	if (!hu->serdev)
+		return 0;
+
 	/* Check for vregs status, may be hci down has turned
 	 * off the voltage regulator.
 	 */
@@ -1607,27 +1615,29 @@ static int qca_regulator_init(struct hci_uart *hu)
 		}
 	}
 
-	if (qca_is_wcn399x(soc_type)) {
-		/* Forcefully enable wcn399x to enter in to boot mode. */
-		host_set_baudrate(hu, 2400);
-		ret = qca_send_power_pulse(hu, false);
-		if (ret)
-			return ret;
-	}
-
 	/* For wcn6750 need to enable gpio bt_en */
 	if (qcadev->bt_en) {
 		gpiod_set_value_cansleep(qcadev->bt_en, 0);
 		msleep(50);
 		gpiod_set_value_cansleep(qcadev->bt_en, 1);
-		msleep(50);
+		msleep(150);
 		if (qcadev->sw_ctrl) {
 			sw_ctrl_state = gpiod_get_value_cansleep(qcadev->sw_ctrl);
 			bt_dev_dbg(hu->hdev, "SW_CTRL is %d", sw_ctrl_state);
 		}
 	}
 
-	qca_set_speed(hu, QCA_INIT_SPEED);
+	if (qca_is_wcn399x(soc_type)) {
+		/* Forcefully enable wcn399x to enter in to boot mode. */
+		host_set_baudrate(hu, 2400);
+		ret = qca_send_power_pulse(hu, false);
+		if (ret)
+			return ret;
+	}
+
+	if (qca_is_wcn399x(soc_type) ||
+	    qca_is_wcn6750(soc_type))
+		qca_set_speed(hu, QCA_INIT_SPEED);
 
 	if (qca_is_wcn399x(soc_type)) {
 		ret = qca_send_power_pulse(hu, true);
@@ -1647,38 +1657,12 @@ static int qca_regulator_init(struct hci_uart *hu)
 		return ret;
 	}
 
-	hci_uart_set_flow_control(hu, false);
-
-	return 0;
-}
-
-static int qca_power_on(struct hci_dev *hdev)
-{
-	struct hci_uart *hu = hci_get_drvdata(hdev);
-	enum qca_btsoc_type soc_type = qca_soc_type(hu);
-	struct qca_serdev *qcadev;
-	struct qca_data *qca = hu->priv;
-	int ret = 0;
-
-	/* Non-serdev device usually is powered by external power
-	 * and don't need additional action in driver for power on
-	 */
-	if (!hu->serdev)
-		return 0;
-
 	if (qca_is_wcn399x(soc_type) ||
-	    qca_is_wcn6750(soc_type)) {
-		ret = qca_regulator_init(hu);
-	} else {
-		qcadev = serdev_device_get_drvdata(hu->serdev);
-		if (qcadev->bt_en) {
-			gpiod_set_value_cansleep(qcadev->bt_en, 1);
-			/* Controller needs time to bootup. */
-			msleep(150);
-		}
-	}
+	    qca_is_wcn6750(soc_type))
+		hci_uart_set_flow_control(hu, false);
 
 	clear_bit(QCA_BT_OFF, &qca->flags);
+
 	return ret;
 }
 
-- 
2.30.2


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  parent reply	other threads:[~2021-08-17  0:56 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-17  0:54 [RFC PATCH 00/15] create power sequencing subsystem Dmitry Baryshkov
2021-08-17  0:54 ` [RFC PATCH 01/15] power: add power sequencer subsystem Dmitry Baryshkov
2021-08-19 23:37   ` Bjorn Andersson
2021-08-17  0:54 ` [RFC PATCH 02/15] pwrseq: port MMC's pwrseq drivers to new pwrseq subsystem Dmitry Baryshkov
2021-08-17  0:54 ` [RFC PATCH 03/15] mmc: core: switch " Dmitry Baryshkov
2021-08-17  0:54 ` [RFC PATCH 04/15] ath10k: add support for pwrseq sequencing Dmitry Baryshkov
2021-08-17  0:54 ` [RFC PATCH 05/15] Bluetooth: hci_qca: merge qca_power into qca_serdev Dmitry Baryshkov
2021-08-17  0:54 ` [RFC PATCH 06/15] Bluetooth: hci_qca: merge init paths Dmitry Baryshkov
2021-08-17  0:54 ` Dmitry Baryshkov [this message]
2021-08-17  0:55 ` [RFC PATCH 08/15] Bluetooth: hci_qca: futher rework of power on/off handling Dmitry Baryshkov
2021-08-17  0:55 ` [RFC PATCH 09/15] Bluetooth: hci_qca: add support for pwrseq Dmitry Baryshkov
2021-08-17  0:55 ` [RFC PATCH 10/15] pwrseq: add support for QCA BT+WiFi power sequencer Dmitry Baryshkov
2021-08-19 23:18   ` Bjorn Andersson
2021-08-20  8:10     ` Dmitry Baryshkov
2021-08-20 16:35       ` Bjorn Andersson
2021-08-17  0:55 ` [RFC PATCH 11/15] arm64: dts: qcom: sdm845-db845c: switch bt+wifi to qca " Dmitry Baryshkov
2021-08-19 23:40   ` Bjorn Andersson
2021-08-17  0:55 ` [RFC PATCH 12/15] arm64: dts: qcom: qrb5165-rb5: add bluetooth support Dmitry Baryshkov
2021-08-17  0:55 ` [RFC PATCH 13/15] arm64: dts: qcom: sdm845-db845c: add second channel support to qca power sequencer Dmitry Baryshkov
2021-08-17  0:55 ` [RFC PATCH 14/15] WIP: PCI: qcom: use pwrseq to power up bus devices Dmitry Baryshkov
2021-08-19 23:44   ` Bjorn Andersson
2021-08-20  8:50     ` Dmitry Baryshkov
2021-08-17  0:55 ` [RFC PATCH 15/15] WIP: arm64: dts: qcom: qrb5165-rb5: add bus-pwrseq property to pcie0 Dmitry Baryshkov
2021-08-19 15:23 ` [RFC PATCH 00/15] create power sequencing subsystem Marcel Holtmann
2021-08-20 13:08   ` Dmitry Baryshkov
2021-08-20 17:02     ` Bjorn Andersson
2021-08-20 18:06       ` Dmitry Baryshkov
2021-08-21  6:50     ` Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210817005507.1507580-8-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=ath10k@lists.infradead.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=davem@davemloft.net \
    --cc=johan.hedberg@gmail.com \
    --cc=kuba@kernel.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    --cc=marcel@holtmann.org \
    --cc=netdev@vger.kernel.org \
    --cc=svarbanov@mm-sol.com \
    --cc=ulf.hansson@linaro.org \
    --subject='Re: [RFC PATCH 07/15] Bluetooth: hci_qca: merge qca_power_on with qca_regulators_init' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).