ath10k.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Marcel Holtmann <marcel@holtmann.org>,
	Johan Hedberg <johan.hedberg@gmail.com>,
	Luiz Augusto von Dentz <luiz.dentz@gmail.com>,
	Kalle Valo <kvalo@codeaurora.org>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: linux-arm-msm@vger.kernel.org, linux-mmc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
	ath10k@lists.infradead.org, linux-wireless@vger.kernel.org,
	netdev@vger.kernel.org
Subject: [RFC v2 08/13] ath10k: add support for pwrseq sequencing
Date: Sun, 29 Aug 2021 16:13:00 +0300	[thread overview]
Message-ID: <20210829131305.534417-9-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20210829131305.534417-1-dmitry.baryshkov@linaro.org>

Power sequencing for Qualcomm WiFi+BT chipsets are being reworked to use
pwrseq rather than individually handling all the regulators. Add support
for pwrseq to ath10k SNOC driver.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/net/wireless/ath/ath10k/snoc.c | 45 +++++++++++++-------------
 drivers/net/wireless/ath/ath10k/snoc.h |  4 +--
 2 files changed, 25 insertions(+), 24 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index ea00fbb15601..8578c56982df 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -14,6 +14,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/of_address.h>
 #include <linux/iommu.h>
+#include <linux/pwrseq/consumer.h>
 
 #include "ce.h"
 #include "coredump.h"
@@ -41,14 +42,6 @@ static char *const ce_name[] = {
 	"WLAN_CE_11",
 };
 
-static const char * const ath10k_regulators[] = {
-	"vdd-0.8-cx-mx",
-	"vdd-1.8-xo",
-	"vdd-1.3-rfa",
-	"vdd-3.3-ch0",
-	"vdd-3.3-ch1",
-};
-
 static const char * const ath10k_clocks[] = {
 	"cxo_ref_clk_pin", "qdss",
 };
@@ -1010,10 +1003,14 @@ static int ath10k_hw_power_on(struct ath10k *ar)
 
 	ath10k_dbg(ar, ATH10K_DBG_SNOC, "soc power on\n");
 
-	ret = regulator_bulk_enable(ar_snoc->num_vregs, ar_snoc->vregs);
+	ret = pwrseq_full_power_on(ar_snoc->pwrseq);
 	if (ret)
 		return ret;
 
+	ret = regulator_enable(ar_snoc->vreg_cx_mx);
+	if (ret)
+		goto vreg_pwrseq_off;
+
 	ret = clk_bulk_prepare_enable(ar_snoc->num_clks, ar_snoc->clks);
 	if (ret)
 		goto vreg_off;
@@ -1021,11 +1018,14 @@ static int ath10k_hw_power_on(struct ath10k *ar)
 	return ret;
 
 vreg_off:
-	regulator_bulk_disable(ar_snoc->num_vregs, ar_snoc->vregs);
+	regulator_disable(ar_snoc->vreg_cx_mx);
+vreg_pwrseq_off:
+	pwrseq_power_off(ar_snoc->pwrseq);
+
 	return ret;
 }
 
-static int ath10k_hw_power_off(struct ath10k *ar)
+static void ath10k_hw_power_off(struct ath10k *ar)
 {
 	struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar);
 
@@ -1033,7 +1033,9 @@ static int ath10k_hw_power_off(struct ath10k *ar)
 
 	clk_bulk_disable_unprepare(ar_snoc->num_clks, ar_snoc->clks);
 
-	return regulator_bulk_disable(ar_snoc->num_vregs, ar_snoc->vregs);
+	regulator_disable(ar_snoc->vreg_cx_mx);
+
+	pwrseq_power_off(ar_snoc->pwrseq);
 }
 
 static void ath10k_snoc_wlan_disable(struct ath10k *ar)
@@ -1691,20 +1693,19 @@ static int ath10k_snoc_probe(struct platform_device *pdev)
 		goto err_release_resource;
 	}
 
-	ar_snoc->num_vregs = ARRAY_SIZE(ath10k_regulators);
-	ar_snoc->vregs = devm_kcalloc(&pdev->dev, ar_snoc->num_vregs,
-				      sizeof(*ar_snoc->vregs), GFP_KERNEL);
-	if (!ar_snoc->vregs) {
-		ret = -ENOMEM;
+	ar_snoc->pwrseq = devm_pwrseq_get(&pdev->dev, "wifi");
+	if (IS_ERR(ar_snoc->pwrseq)) {
+		ret = PTR_ERR(ar_snoc->pwrseq);
+		if (ret != -EPROBE_DEFER)
+			ath10k_warn(ar, "failed to acquire pwrseq: %d\n", ret);
 		goto err_free_irq;
 	}
-	for (i = 0; i < ar_snoc->num_vregs; i++)
-		ar_snoc->vregs[i].supply = ath10k_regulators[i];
 
-	ret = devm_regulator_bulk_get(&pdev->dev, ar_snoc->num_vregs,
-				      ar_snoc->vregs);
-	if (ret < 0)
+	ar_snoc->vreg_cx_mx = devm_regulator_get(&pdev->dev, "vdd-0.8-cx-mx");
+	if (IS_ERR(ar_snoc->vreg_cx_mx)) {
+		ret = PTR_ERR(ar_snoc->vreg_cx_mx);
 		goto err_free_irq;
+	}
 
 	ar_snoc->num_clks = ARRAY_SIZE(ath10k_clocks);
 	ar_snoc->clks = devm_kcalloc(&pdev->dev, ar_snoc->num_clks,
diff --git a/drivers/net/wireless/ath/ath10k/snoc.h b/drivers/net/wireless/ath/ath10k/snoc.h
index 5095d1893681..5188d6f6f850 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.h
+++ b/drivers/net/wireless/ath/ath10k/snoc.h
@@ -70,10 +70,10 @@ struct ath10k_snoc {
 	struct ath10k_snoc_ce_irq ce_irqs[CE_COUNT_MAX];
 	struct ath10k_ce ce;
 	struct timer_list rx_post_retry;
-	struct regulator_bulk_data *vregs;
-	size_t num_vregs;
+	struct regulator *vreg_cx_mx;
 	struct clk_bulk_data *clks;
 	size_t num_clks;
+	struct pwrseq *pwrseq;
 	struct ath10k_qmi *qmi;
 	unsigned long flags;
 	bool xo_cal_supported;
-- 
2.33.0


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  parent reply	other threads:[~2021-08-29 13:13 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-29 13:12 [RFC v2 00/13] create power sequencing subsystem Dmitry Baryshkov
2021-08-29 13:12 ` [RFC v2 01/13] power: add power sequencer subsystem Dmitry Baryshkov
2021-09-10 10:02   ` Ulf Hansson
2021-09-13 12:32     ` Dmitry Baryshkov
2021-09-13 13:42       ` Ulf Hansson
2021-08-29 13:12 ` [RFC v2 02/13] pwrseq: port MMC's pwrseq drivers to new pwrseq subsystem Dmitry Baryshkov
2021-08-29 13:12 ` [RFC v2 03/13] mmc: core: switch " Dmitry Baryshkov
2021-08-29 13:12 ` [RFC v2 04/13] pwrseq: add support for QCA BT+WiFi power sequencer Dmitry Baryshkov
2021-08-29 13:12 ` [RFC v2 05/13] pwrseq: add fallback support Dmitry Baryshkov
2021-08-29 13:12 ` [RFC v2 06/13] pwrseq: pwrseq_qca: implement " Dmitry Baryshkov
2021-08-29 13:12 ` [RFC v2 07/13] Bluetooth: hci_qca: switch to using pwrseq Dmitry Baryshkov
2021-08-29 13:13 ` Dmitry Baryshkov [this message]
2021-08-29 13:13 ` [RFC v2 09/13] arm64: dts: qcom: sdm845-db845c: switch bt+wifi to qca power sequencer Dmitry Baryshkov
2021-08-29 13:13 ` [RFC v2 10/13] arm64: dts: qcom: qrb5165-rb5: add bluetooth support Dmitry Baryshkov
2021-08-29 13:13 ` [RFC v2 11/13] arm64: dts: qcom: sdm845-db845c: add second channel to qca power sequencer Dmitry Baryshkov
2021-08-29 13:13 ` [RFC v2 12/13] WIP: PCI: qcom: use pwrseq to power up bus devices Dmitry Baryshkov
2021-08-29 13:13 ` [RFC v2 13/13] WIP: arm64: dts: qcom: qrb5165-rb5: add bus-pwrseq property to pcie0 Dmitry Baryshkov
2021-09-13 23:39 ` [RFC v2 00/13] create power sequencing subsystem Steev Klimaszewski
2021-10-06  3:49   ` Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210829131305.534417-9-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=ath10k@lists.infradead.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=davem@davemloft.net \
    --cc=johan.hedberg@gmail.com \
    --cc=kuba@kernel.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    --cc=marcel@holtmann.org \
    --cc=netdev@vger.kernel.org \
    --cc=svarbanov@mm-sol.com \
    --cc=ulf.hansson@linaro.org \
    --subject='Re: [RFC v2 08/13] ath10k: add support for pwrseq sequencing' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).