wifi: ath10k-firmware: QCA9888 hw2.0: Add Linksys WHW03V2 specific BDFs

wifi: ath10k-firmware: QCA9888 hw2.0: Add Linksys WHW03V2 specific BDFs

[Vincent Tremblay]

[-- Attachment #1: Type: text/plain, Size: 849 bytes --]

Hi,

This is a set of files for the Linksys WHW03V2 that are currently
missing from the repository.

*  description for what hardware this is:

  - it is a IPQ4019 based board
  - QCA9888 V2 interface connected over PCI-E to operate on higher
part of the 5 GHZ spectrum

* origin of the board file (did you create it yourself or where you
  downloaded):

  They were extracted from the vendor firmware (version 2.1.19.209783).
  The files can be found in the folder "/lib/firmware/QCA9888/v2/FCC".

* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k):

bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-whw03v2.bin
md5sum: fde89e0dace1652566d96fb9c83b1c61

* attach the actual board file (board.bin):

  - The name of the files are equal to the id string in the board-2.bin
    (minus the ".bin")

Regards,
Vincent Tremblay

[-- Attachment #2: bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-whw03v2.bin --]
[-- Type: application/octet-stream, Size: 12064 bytes --]

[-- Attachment #3: Type: text/plain, Size: 146 bytes --]

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: wifi: ath10k-firmware: QCA9888 hw2.0: Add Linksys WHW03V2 specific BDFs

[Kalle Valo]

Vincent Tremblay <vincent@vtremblay.dev> writes:

> This is a set of files for the Linksys WHW03V2 that are currently
> missing from the repository.
>
> *  description for what hardware this is:
>
>   - it is a IPQ4019 based board
>   - QCA9888 V2 interface connected over PCI-E to operate on higher
> part of the 5 GHZ spectrum
>
> * origin of the board file (did you create it yourself or where you
>   downloaded):
>
>   They were extracted from the vendor firmware (version 2.1.19.209783).
>   The files can be found in the folder "/lib/firmware/QCA9888/v2/FCC".
>
> * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k):
>
> bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-whw03v2.bin
> md5sum: fde89e0dace1652566d96fb9c83b1c61
>
> * attach the actual board file (board.bin):
>
>   - The name of the files are equal to the id string in the board-2.bin
>     (minus the ".bin")

Thanks, added to QCA9888/hw2.0/board-2.bin:

New:
bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-whw03v2

Changed:


Deleted:

1 board image(s) added, 0 changed, 0 deleted, 17 in total

https://github.com/kvalo/ath10k-firmware/commit/07101af80a3c94a395add066613af5ede68c0727

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k