ath10k.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
 messages from 2019-11-08 11:40:16 to 2019-12-17 18:33:48 UTC [more...]

[PATCH v2] ath10k: Per-chain rssi should sum the secondary channels
 2019-12-17 18:33 UTC 

[PATCH] ath10k: Per-chain rssi should sum the secondary channels
 2019-12-17 18:29 UTC  (8+ messages)

[RESEND] ath10k: add tx hw 802.11 encapusaltion offloading support
 2019-12-17 15:29 UTC  (2+ messages)

[PATCH V4 0/4] Enable virtual time-based airtime scheduler support on ath10k
 2019-12-17 15:20 UTC  (10+ messages)
` [PATCH 1/4] mac80211: Switch to a virtual time-based airtime scheduler
` [PATCH 2/4] mac80211: fix issue in loop scenario
` [PATCH 3/4] mac80211: fix low throughput in multi-clients situation
` [PATCH 4/4] mac80211: Sync airtime weight sum with per AC synced sta airtime weight together

Re: ath10k: wmi service ready event not received using QCA 9377
 2019-12-17 14:35 UTC 

[PATCH] ath10k: Fix some typo in some warning messages
 2019-12-17 14:24 UTC  (2+ messages)

[PATCH v2 0/2] Don't call SCM interface for statically mapped msa region
 2019-12-17 14:14 UTC  (6+ messages)
` [PATCH v2 1/2] dt: bindings: add dt entry flag to skip SCM call for "
` [PATCH v2 2/2] ath10k: Don't call SCM interface for statically mapped "

[bug report] mmc: core: Re-work HW reset for SDIO cards
 2019-12-17  7:54 UTC  (2+ messages)

[PATCH 1/2] dt-bindings: ath10k: Add new dt entries to identify coex support
 2019-12-16 11:40 UTC  (2+ messages)
` [PATCH 2/2] ath10k: Add support to read btcoex related data from DT

[PATCH] ath10k: set WMI_PEER_AUTHORIZE after a firmware crash
 2019-12-14 16:01 UTC  (4+ messages)

[PATCH] ath10k: Fix setting txpower to zero
 2019-12-13 21:55 UTC  (2+ messages)

qca988x fw crash/unrecoverable pcie errors causes error loop
 2019-12-13 11:15 UTC 

Cannot bring up SDIO based 9377 (dma_alloc_coherent() fails)
 2019-12-12 18:36 UTC  (5+ messages)

ath10k: wmi service ready event not received using QCA 9377
 2019-12-12 11:22 UTC 

[PATCH,v3] Revert "ath10k: fix DMA related firmware crashes on multiple devices"
 2019-12-12  7:50 UTC 

[PATCH AUTOSEL 4.4 51/71] ath10k: fix get invalid tx rate for Mesh metric
 2019-12-10 22:32 UTC 

[PATCH AUTOSEL 4.9 64/91] ath10k: fix get invalid tx rate for Mesh metric
 2019-12-10 22:30 UTC 

[PATCH AUTOSEL 4.14 020/130] ath10k: fix offchannel tx failure when no ath10k_mac_tx_frm_has_freq
 2019-12-10 22:02 UTC  (2+ messages)
` [PATCH AUTOSEL 4.14 097/130] ath10k: fix get invalid tx rate for Mesh metric

[PATCH AUTOSEL 4.19 013/177] ath10k: fix backtrace on coredump
 2019-12-10 21:31 UTC  (4+ messages)
` [PATCH AUTOSEL 4.19 023/177] ath10k: fix offchannel tx failure when no ath10k_mac_tx_frm_has_freq
` [PATCH AUTOSEL 4.19 054/177] ath10k: Correct error handling of dma_map_single()
` [PATCH AUTOSEL 4.19 127/177] ath10k: fix get invalid tx rate for Mesh metric

[PATCH AUTOSEL 5.3 012/292] ath10k: add cleanup in ath10k_sta_state()
 2019-12-10 21:20 UTC  (3+ messages)
` [PATCH AUTOSEL 5.3 015/292] ath10k: Check if station exists before forwarding tx airtime report
` [PATCH AUTOSEL 5.3 024/292] ath10k: fix backtrace on coredump

[PATCH AUTOSEL 5.4 048/350] ath10k: fix offchannel tx failure when no ath10k_mac_tx_frm_has_freq
 2019-12-10 21:05 UTC  (3+ messages)
` [PATCH AUTOSEL 5.4 106/350] ath10k: Correct error handling of dma_map_single()
` [PATCH AUTOSEL 5.4 248/350] ath10k: fix get invalid tx rate for Mesh metric

[PATCH AUTOSEL 5.4 017/350] ath10k: add cleanup in ath10k_sta_state()
 2019-12-10 20:58 UTC  (3+ messages)
` [PATCH AUTOSEL 5.4 020/350] ath10k: Check if station exists before forwarding tx airtime report
` [PATCH AUTOSEL 5.4 030/350] ath10k: fix backtrace on coredump

[PATCH] ath10k: improve power save performance for sdio
 2019-12-06  2:57 UTC 

[PATCH] ath10k: support PCIe enter L1 state
 2019-12-02 18:48 UTC  (10+ messages)

[PATCH] ath: add support for special 0x0 regulatory domain
 2019-12-02 10:24 UTC  (3+ messages)

[PATCH] ath10k: change bundle count for max rx bundle for sdio
 2019-12-02 10:07 UTC 

[PATCH v6] ath10k: enable napi on RX path for sdio
 2019-12-02 10:00 UTC  (2+ messages)

[PATCH v7 0/3] ath10k: improve throughout of TX of sdio
 2019-12-02  8:49 UTC  (2+ messages)

[PATCH] ath10k: set max mtu to 1500 for sdio chip
 2019-12-02  4:28 UTC  (2+ messages)

duplicate authentications / excessive missing ACKs / deauth due to inactivity timer
 2019-12-02  3:59 UTC  (6+ messages)
        ` Fwd: "

[PATCH] ath10k: enable wow feature for sdio chip
 2019-11-29  7:46 UTC 

[PATCH] ath10k: change log level for mpdu status of sdio chip
 2019-11-29  7:44 UTC 

[PATCH] ath10k: enable firmware log by default for sdio
 2019-11-29  7:41 UTC  (2+ messages)

[PATCH] ath: add support for special 0x0 regulatory domain
 2019-11-29  7:34 UTC 

[PATCH v8 2/4] ath10k: change ATH10K_SDIO_BUS_REQUEST_MAX_NUM from 64 to 1024
 2019-11-28 10:30 UTC  (4+ messages)
` [PATCH v8 1/4] ath10k: disable TX complete indication of htt for sdio
` [PATCH v8 3/4] ath10k: add htt TX bundle "
` [PATCH v8 4/4] ath10k: enable alt data of TX path "

[PATCH v8 0/4] ath10k: improve throughout of TX of sdio
 2019-11-28 10:30 UTC 

[PATCH] ath10k: move non-fatal warn logs to dbg level
 2019-11-27 15:48 UTC 

[PATCH] ath10k: enable wow feature for sdio chip
 2019-11-27  6:04 UTC 

[PATCH] ath10k: change log level for mpdu status of sdio chip
 2019-11-27  3:33 UTC 

[PATCH] ath10k: set WMI_PEER_AUTHORIZE after a firmware crash
 2019-11-27  3:19 UTC 

[PATCH] ath10k: set max mtu to 1500 for sdio chip
 2019-11-27  2:59 UTC 

[PATCH] ath10k: change bundle count for max rx bundle for sdio
 2019-11-26 10:06 UTC 

[EXT] [PATCH] ath10k: enable firmware log by default for sdio
 2019-11-26  9:36 UTC 

[PATCH] ath10k: drop the TX packet which size exceed credit size for sdio
 2019-11-26  9:18 UTC 

[PATCH] ath10k: move non-fatal warn logs to dbg level
 2019-11-25 13:10 UTC 

[PATCH net-next v2] ath10k: fix RX of frames with broken FCS in monitor mode
 2019-11-25 12:14 UTC  (3+ messages)

[PATCH] ath10k: report rssi of each chain to mac80211 for sdio
 2019-11-25 12:12 UTC  (2+ messages)

[PATCH v2] ath10k: Handle "invalid" BDFs for msm8998 devices
 2019-11-25 12:11 UTC  (2+ messages)

[PATCH v2] ath10k: Fix qmi init error handling
 2019-11-25 12:02 UTC  (2+ messages)

[PATCH v2] ath10k: add NL80211_FEATURE_ND_RANDOM_MAC_ADDR for NLO
 2019-11-25 11:57 UTC  (2+ messages)

[PATCH] ath10k: Handle when FW doesn't support QMI_WLFW_HOST_CAP_REQ_V01
 2019-11-25 11:56 UTC  (3+ messages)

[PATCH] ath10k: add large size for BMI download data for SDIO
 2019-11-25 11:54 UTC  (2+ messages)

[PATCH] ath10k: correct the tlv len of ath10k_wmi_tlv_op_gen_config_pno_start
 2019-11-25 11:52 UTC  (2+ messages)

[PATCH 1/2] ath10k: cosmetic cleanup to sdio files
 2019-11-25 11:51 UTC  (2+ messages)

[PATCH v6 1/3] ath10k: enable RX bundle receive for sdio
 2019-11-25 11:49 UTC  (2+ messages)

[PATCH V10 1/2] mac80211: add hw 80211 encapsulation offloading support
 2019-11-25 10:04 UTC  (2+ messages)
` [PATCH V10 2/2] ath10k: add tx hw 802.11 encapusaltion "

[PATCH v6 0/3] ath10k: improve throughout of RX of sdio
 2019-11-22 10:02 UTC  (8+ messages)
` [PATCH v6 3/3] ath10k: add workqueue for RX path "

[PATCH RFC, v2] Revert "ath10k: fix DMA related firmware crashes on multiple devices"
 2019-11-22  9:45 UTC  (2+ messages)

[PATCH v2 3/3] mmc: core: Re-work HW reset for SDIO cards
 2019-11-21  2:29 UTC  (6+ messages)

[BUG] ath10k: CPU scaling related performance issue
 2019-11-19 11:28 UTC  (2+ messages)

[PATCH v2 2/2] ath10k: correct legacy rate in tx stats
 2019-11-19  7:19 UTC  (2+ messages)
` [PATCH v2 1/2] ath10k: add ppdu stats support for QCA6174/QCA9377

[PATCH v2 0/2] ath10k: correct tx bitrate for QCA6174/QCA9377/QCA9888
 2019-11-19  7:19 UTC 

[RFC] ath10k: possible RSSI recalibration bug?
 2019-11-19  6:43 UTC 

[PATCH v2 0/2] ath10k: correct tx bitrate for QCA6174/QCA9377/QCA9888
 2019-11-19  0:20 UTC  (3+ messages)
` [PATCH v2 1/2] ath10k: add ppdu stats support for QCA6174/QCA9377
` [PATCH v2 2/2] ath10k: correct legacy rate in tx stats

[PATCH v9 0/4] Add Airtime Queue Limits (AQL) to mac80211
 2019-11-18 23:12 UTC  (10+ messages)
` [PATCH v9 1/4] mac80211: Add new sta_info getter by sta/vif addrs
` [PATCH v9 2/4] mac80211: Import airtime calculation code from mt76
` [PATCH v9 3/4] mac80211: Implement Airtime-based Queue Limit (AQL)
` [PATCH v9 4/4] mac80211: Use Airtime-based Queue Limits (AQL) on packet dequeue

[PATCH v10 0/4] Add Airtime Queue Limits (AQL) to mac80211
 2019-11-18 21:21 UTC  (6+ messages)
` [PATCH v10 1/4] mac80211: Add new sta_info getter by sta/vif addrs
` [PATCH v10 2/4] mac80211: Import airtime calculation code from mt76
` [PATCH v10 3/4] mac80211: Implement Airtime-based Queue Limit (AQL)
` [PATCH v10 4/4] mac80211: Use Airtime-based Queue Limits (AQL) on packet dequeue

[PATCH] ath10k: remove the max_sched_scan_reqs value
 2019-11-18  3:25 UTC 

[PATCH AUTOSEL 4.9 08/99] ath10k: allocate small size dma memory in ath10k_pci_diag_write_mem
 2019-11-16 15:49 UTC 

[PATCH AUTOSEL 4.14 011/150] ath10k: allocate small size dma memory in ath10k_pci_diag_write_mem
 2019-11-16 15:45 UTC 

[PATCH AUTOSEL 4.19 019/237] ath10k: set probe request oui during driver start
 2019-11-16 15:40 UTC  (3+ messages)
` [PATCH AUTOSEL 4.19 020/237] ath10k: allocate small size dma memory in ath10k_pci_diag_write_mem
` [PATCH AUTOSEL 4.19 200/237] ath10k: snoc: fix unbalanced clock error handling

[PATCH] ath10k: qmi: Sleep for a while before assigning MSA memory
 2019-11-15  6:59 UTC  (2+ messages)

[PATCH] ath10k: Revert "ath10k: add cleanup in ath10k_sta_state()"
 2019-11-15  6:58 UTC  (2+ messages)

[PATCH] ath10k: add cleanup in ath10k_sta_state()
 2019-11-14  7:42 UTC  (4+ messages)

[PATCH v2] ath10k: remove the max_sched_scan_reqs value
 2019-11-14  5:00 UTC 

[PATCH] ath10k: Fix qmi init error handling
 2019-11-13 15:11 UTC  (5+ messages)

[PATCH] ath10k: Handle "invalid" BDFs for msm8998 devices
 2019-11-13  7:00 UTC  (6+ messages)

[PATCH AUTOSEL 4.4 05/48] ath10k: fix vdev-start timeout on error
 2019-11-13  2:00 UTC 

[PATCH AUTOSEL 4.9 08/68] ath10k: fix vdev-start timeout on error
 2019-11-13  1:58 UTC 

[PATCH AUTOSEL 4.14 013/115] ath10k: fix vdev-start timeout on error
 2019-11-13  1:54 UTC 

[PATCH AUTOSEL 4.19 025/209] ath10k: fix vdev-start timeout on error
 2019-11-13  1:47 UTC 

[PATCH 0/2] ath10k: correct tx bitrate for QCA6174/QCA9377/QCA9888
 2019-11-12 18:14 UTC  (4+ messages)
` [PATCH 1/2] ath10k: add ppdu stats support for QCA6174/QCA9377
` [PATCH 2/2] ath10k: correct legacy rate in tx stats

[PATCH] ath10k: remove the max_sched_scan_reqs value
 2019-11-12  5:57 UTC 

[PATCH v7] mac80211: Import airtime calculation code from mt76
 2019-11-11 16:48 UTC 

[PATCH] ath10k:mac: disassoc dbg msg after return check
 2019-11-11  9:22 UTC  (3+ messages)

[PATCH v6 0/4] Add Airtime Queue Limits (AQL) to mac80211
 2019-11-09 11:22 UTC  (9+ messages)
` [PATCH v6 3/4] mac80211: Implement Airtime-based Queue Limit (AQL)

[PATCH AUTOSEL 4.4 17/44] ath10k: wmi: disable softirq's while calling ieee80211_rx
 2019-11-08 11:46 UTC 

[PATCH AUTOSEL 4.9 01/64] ath10k: fix kernel panic by moving pci flush after napi_disable
 2019-11-08 11:45 UTC  (2+ messages)
` [PATCH AUTOSEL 4.9 24/64] ath10k: wmi: disable softirq's while calling ieee80211_rx

[PATCH AUTOSEL 4.14 003/103] ath10k: fix kernel panic by moving pci flush after napi_disable
 2019-11-08 11:42 UTC  (3+ messages)
` [PATCH AUTOSEL 4.14 016/103] ath10k: limit available channels via DT ieee80211-freq-limit
` [PATCH AUTOSEL 4.14 042/103] ath10k: wmi: disable softirq's while calling ieee80211_rx

[PATCH AUTOSEL 4.19 092/205] ath10k: avoid possible memory access violation
 2019-11-08 11:36 UTC  (2+ messages)
` [PATCH AUTOSEL 4.19 094/205] ath10k: wmi: disable softirq's while calling ieee80211_rx


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).