From: Kalle Valo <kvalo@kernel.org>
To: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Cc: <ath11k@lists.infradead.org>, <linux-wireless@vger.kernel.org>,
Govindaraj Saminathan <quic_gsaminat@quicinc.com>,
Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>,
Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Subject: Re: [PATCH 1/2] wifi: ath11k: factory test mode support
Date: Mon, 27 Feb 2023 13:03:32 +0000 (UTC) [thread overview]
Message-ID: <167750301098.30655.1426219945777543435.kvalo@kernel.org> (raw)
In-Reply-To: <20230213130854.2473-2-quic_rajkbhag@quicinc.com>
Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> wrote:
> Add support to process factory test mode commands(FTM) for calibration.
> By default firmware start with NORMAL mode and to process the FTM commands
> firmware needs to be restarted in FTM mode using module parameter ftm_mode.
> The pre-request is all the radios should be down before starting the test.
>
> When start command ATH11K_TM_CMD_TESTMODE_START is received, ar state
> is set to Test Mode. If the FTM command or event length is greater
> than 256 bytes, it will be broken down into multiple segments and
> encoded with TLV header if it is segmented commands, else it is sent
> to firmware as it is.
>
> On receiving UTF event from firmware, if it is segmented event, the driver
> will wait until it receives all the segments and notify the complete
> data to user application. In case the segmented sequence are missed or
> lost from the firmware, driver will skip the already received partial data.
>
> In case of unsegmented UTF event from firmware, driver notifies the
> data to the user application as it comes. Applications handles
> the data further.
>
> Command to boot in ftm mode
> insmod ath11k ftm_mode=1
>
> Tested-on : IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
>
> Signed-off-by: Govindaraj Saminathan <quic_gsaminat@quicinc.com>
> Co-developed-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
> Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
> Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
This had new warnings:
drivers/net/wireless/ath/ath11k/testmode.c:27:16: error: no previous prototype for 'ath11k_tm_get_ar' [-Werror=missing-prototypes]
drivers/net/wireless/ath/ath11k/testmode.h:26: void function return statements are not generally useful
drivers/net/wireless/ath/ath11k/core.c:1839: Blank lines aren't necessary before a close brace '}'
I fixed them in the pending branch, but please always use ath11k-check before submitting patches.
--
https://patchwork.kernel.org/project/linux-wireless/patch/20230213130854.2473-2-quic_rajkbhag@quicinc.com/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
next prev parent reply other threads:[~2023-02-27 13:03 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-13 13:08 [PATCH 0/2] ath11k: factory test mode support Raj Kumar Bhagat
2023-02-13 13:08 ` [PATCH 1/2] wifi: " Raj Kumar Bhagat
2023-02-27 13:03 ` Kalle Valo [this message]
2023-03-13 9:53 ` Kalle Valo
2023-04-20 9:54 ` Raj Kumar Bhagat
2023-03-13 12:17 ` Kalle Valo
2023-04-20 10:02 ` Raj Kumar Bhagat
2023-02-13 13:08 ` [PATCH 2/2] wifi: ath11k: Allow ath11k to boot without caldata in ftm mode Raj Kumar Bhagat
2023-02-16 14:56 ` [PATCH 0/2] ath11k: factory test mode support Vasanthakumar Thiagarajan
2023-03-13 12:21 ` Kalle Valo
2023-03-28 4:46 ` Raj Kumar Bhagat
2023-05-12 9:05 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=167750301098.30655.1426219945777543435.kvalo@kernel.org \
--to=kvalo@kernel.org \
--cc=ath11k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=quic_gsaminat@quicinc.com \
--cc=quic_rajkbhag@quicinc.com \
--cc=quic_ssreeela@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).