From: Wen Gong <wgong@codeaurora.org>
To: johannes@sipsolutions.net, ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, wgong@codeaurora.org
Subject: [PATCH v3 1/9] mac80211: add power type definition for 6 GHz
Date: Fri, 3 Sep 2021 07:48:13 -0400 [thread overview]
Message-ID: <20210903114821.23346-2-wgong@codeaurora.org> (raw)
In-Reply-To: <20210903114821.23346-1-wgong@codeaurora.org>
6 GHz regulatory domains introduces different modes for 6 GHz AP
operations Low Power Indoor(LPI), Standard Power(SP) and Very Low
Power(VLP). 6 GHz STAs could be operated as either Regular or
Subordinate clients. This patch is define the flags for power type
of AP and STATION mode.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
---
include/linux/ieee80211.h | 34 ++++++++++++++++++++++++++++++++++
include/net/mac80211.h | 2 ++
2 files changed, 36 insertions(+)
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 68d8b9cdd3b8..2bab84297407 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1942,6 +1942,40 @@ int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap,
int mcs, bool ext_nss_bw_capable,
unsigned int max_vht_nss);
+/**
+ * enum ieee80211_ap_reg_power - regulatory power for a Access Point
+ *
+ * @IEEE80211_REG_UNSET_AP: Access Point has no regulatory power mode
+ * @IEEE80211_REG_LPI: Indoor Access Point
+ * @IEEE80211_REG_SP: Standard power Access Point
+ * @IEEE80211_REG_VLP: Very low power Access Point
+ */
+enum ieee80211_ap_reg_power {
+ IEEE80211_REG_UNSET_AP,
+ IEEE80211_REG_LPI_AP,
+ IEEE80211_REG_SP_AP,
+ IEEE80211_REG_VLP_AP,
+ IEEE80211_REG_AP_POWER_AFTER_LAST,
+ IEEE80211_REG_AP_POWER_MAX =
+ IEEE80211_REG_AP_POWER_AFTER_LAST - 1,
+};
+
+/**
+ * enum ieee80211_client_reg_power - regulatory power for a client
+ *
+ * @IEEE80211_REG_UNSET_CLIENT: Client has no regulatory power mode
+ * @IEEE80211_REG_DEFAULT_CLIENT: Default Client
+ * @IEEE80211_REG_SUBORDINATE_CLIENT: Subordinate Client
+ */
+enum ieee80211_client_reg_power {
+ IEEE80211_REG_UNSET_CLIENT,
+ IEEE80211_REG_DEFAULT_CLIENT,
+ IEEE80211_REG_SUBORDINATE_CLIENT,
+ IEEE80211_REG_CLIENT_POWER_AFTER_LAST,
+ IEEE80211_REG_CLIENT_POWER_MAX =
+ IEEE80211_REG_CLIENT_POWER_AFTER_LAST - 1,
+};
+
/* 802.11ax HE MAC capabilities */
#define IEEE80211_HE_MAC_CAP0_HTC_HE 0x01
#define IEEE80211_HE_MAC_CAP0_TWT_REQ 0x02
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index e89530d0d9c6..d0522d7f3351 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -631,6 +631,7 @@ struct ieee80211_fils_discovery {
* @s1g: BSS is S1G BSS (affects Association Request format).
* @beacon_tx_rate: The configured beacon transmit rate that needs to be passed
* to driver when rate control is offloaded to firmware.
+ * @power_type: power type of BSS for 6 GHz
*/
struct ieee80211_bss_conf {
const u8 *bssid;
@@ -700,6 +701,7 @@ struct ieee80211_bss_conf {
u32 unsol_bcast_probe_resp_interval;
bool s1g;
struct cfg80211_bitrate_mask beacon_tx_rate;
+ enum ieee80211_ap_reg_power power_type;
};
/**
--
2.31.1
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
next prev parent reply other threads:[~2021-09-03 11:49 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-03 11:48 [PATCH v3 0/9] cfg80211/mac80211: Add support for 6GHZ STA for various modes : LPI, SP and VLP Wen Gong
2021-09-03 11:48 ` Wen Gong [this message]
2021-09-03 11:48 ` [PATCH v3 2/9] ieee80211: add definition of regulatory info in 6 GHz operation information Wen Gong
2021-09-03 11:48 ` [PATCH v3 3/9] mac80211: add parse " Wen Gong
2021-09-03 11:48 ` [PATCH v3 4/9] cfg80211: add definition for 6 GHz power spectral density(psd) Wen Gong
2021-09-03 11:48 ` [PATCH v3 5/9] cfg80211: save power spectral density(psd) of regulatory rule Wen Gong
2021-09-03 11:48 ` [PATCH v3 6/9] ieee80211: add definition for transmit power envelope element Wen Gong
2021-09-03 11:48 ` [PATCH v3 7/9] mac80211: add parse " Wen Gong
2021-09-03 11:48 ` [PATCH v3 8/9] mac80211: use ieee802_11_parse_elems() to find ies instead of ieee80211_bss_get_ie() Wen Gong
2021-09-23 8:25 ` Wen Gong
2021-09-03 11:48 ` [PATCH v3 9/9] mac80211: save transmit power envelope element and power constraint Wen Gong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210903114821.23346-2-wgong@codeaurora.org \
--to=wgong@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).