[PATCH v2 2/3] wifi: ath11k: qmi: refactor ath11k_qmi_m3_load()

[Kalle Valo <kvalo@kernel.org>]

From: Kalle Valo <quic_kvalo@quicinc.com>

Simple refactoring to make it easier to add firmware-2.bin support in the
following patch.

Earlier ath11k_qmi_m3_load() supported changing m3.bin contents while ath11k is
running. But that's not going to actually work, m3.bin is supposed to the be
same during the lifetime of ath11k, for example we don't support changing the
firmware capabilities on the fly. Due to this ath11k requests m3.bin firmware
file first and only then checks m3_mem->vaddr, so we are basically requesting
the firmware file even if it's not needed. Reverse the code so that m3_mem
buffer is checked first, and only if it doesn't exist, then m3.bin is requested
from user space.

Checking for m3_mem->size is redundant when m3_mem->vaddr is NULL, we would
not be able to use the buffer in that case. So remove the check for size.

Simplify the exit handling and use 'goto out'.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/qmi.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index ab923e24b0a9..5bc98180aed4 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -2493,6 +2493,10 @@ static int ath11k_qmi_m3_load(struct ath11k_base *ab)
 	char path[100];
 	int ret;
 
+	if (m3_mem->vaddr)
+		/* m3 firmware buffer is already available in the DMA buffer */
+		return 0;
+
 	fw = ath11k_core_firmware_request(ab, ATH11K_M3_FILE);
 	if (IS_ERR(fw)) {
 		ret = PTR_ERR(fw);
@@ -2502,25 +2506,25 @@ static int ath11k_qmi_m3_load(struct ath11k_base *ab)
 		return ret;
 	}
 
-	if (m3_mem->vaddr || m3_mem->size)
-		goto skip_m3_alloc;
-
 	m3_mem->vaddr = dma_alloc_coherent(ab->dev,
 					   fw->size, &m3_mem->paddr,
 					   GFP_KERNEL);
 	if (!m3_mem->vaddr) {
 		ath11k_err(ab, "failed to allocate memory for M3 with size %zu\n",
 			   fw->size);
-		release_firmware(fw);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto out;
 	}
 
-skip_m3_alloc:
 	memcpy(m3_mem->vaddr, fw->data, fw->size);
 	m3_mem->size = fw->size;
+
+	ret = 0;
+
+out:
 	release_firmware(fw);
 
-	return 0;
+	return ret;
 }
 
 static void ath11k_qmi_m3_free(struct ath11k_base *ab)
-- 
2.30.2


-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k