From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alex Hacker Date: Fri, 16 Sep 2011 23:12:42 +0600 Subject: [ath9k-devel] (no subject) In-Reply-To: References: Message-ID: <20110916171242.GA4079@infinet.ru> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org I think no any modifcations of the driver code are required. If your card has MIMO capability (based on AR9160, AR9220, AR9280, AR9380 or AR9390 chips) you need to set RX/TX chain masks to 1 and connect your antenna to the fisrst chain connector. For the long links you need to adjust coverage class value. Maximum distance limited by hardware is about 50km for 20MHz and 25km for 40MHz bandwidth. Regards, Alex.