From mboxrd@z Thu Jan 1 00:00:00 1970 From: Martin Blumenstingl Date: Sun, 21 Aug 2016 16:31:02 +0200 Subject: [ath9k-devel] [PATCH v5 0/3] add devicetree support to ath9k In-Reply-To: <20160709232834.31654-1-martin.blumenstingl@googlemail.com> References: <20160709232834.31654-1-martin.blumenstingl@googlemail.com> Message-ID: <20160821143105.27487-1-martin.blumenstingl@googlemail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org This series adds support for configuring ath9k based devices via devicetree. This was tested on PCI(e) based devices. This should work for AHB based devices as well as soon as the ath79 platform is ready to populate the ath9k wmac via devicetree. Changes since v4: - dropped "qca,check-eeprom-endianness" for now - this will be part of a separate patch - update documentation to fix the "compatible" string (as there is a PCI device specific format) Martin Blumenstingl (3): Documentation: dt: net: add ath9k wireless device binding ath9k: add a helper to get the string representation of ath_bus_type ath9k: parse the device configuration from an OF node .../devicetree/bindings/net/wireless/qca,ath9k.txt | 47 ++++++++++++++++++++ drivers/net/wireless/ath/ath.h | 6 +++ drivers/net/wireless/ath/ath9k/init.c | 51 ++++++++++++++++++++++ drivers/net/wireless/ath/main.c | 7 +++ 4 files changed, 111 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt -- 2.9.3