From mboxrd@z Thu Jan 1 00:00:00 1970 From: Julian Calaby Date: Mon, 27 Jun 2016 10:20:26 +1000 Subject: [ath9k-devel] [PATCH RFC v3 1/3] Documentation: dt: net: add ath9k wireless device binding In-Reply-To: <20160624123430.4097-2-martin.blumenstingl@googlemail.com> References: <20160624123430.4097-1-martin.blumenstingl@googlemail.com> <20160624123430.4097-2-martin.blumenstingl@googlemail.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Hi Martin, On Fri, Jun 24, 2016 at 10:34 PM, Martin Blumenstingl wrote: > Add documentation how devicetree can be used to configure ath9k based > devices. > > Signed-off-by: Martin Blumenstingl > --- > changes in v2 -> v3: > - improved wording of the qca,disable-2ghz and qca,disable-5ghz properties > - replaced qca,eeprom-name with qca,no-eeprom (the eeprom name is now > built automatically within ath9k). The naming was chosen to stay > consistent with other drivers (such as davicom-dm9000 and via-velocity) > - added reference to the mac-address and local-mac-address properties > - removed invalid device_type property from the example > > .../devicetree/bindings/net/wireless/qca,ath9k.txt | 46 ++++++++++++++++++++++ > 1 file changed, 46 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt > > diff --git a/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt > new file mode 100644 > index 0000000..ff83fd4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/wireless/qca,ath9k.txt > @@ -0,0 +1,46 @@ > +* Qualcomm Atheros ath9k wireless devices > + > +This node provides properties for configuring the ath9k wireless device. The > +node is expected to be specified as a child node of the PCI controller to > +which the wireless chip is connected. > + > +Required properties: > +- compatible: Should be "qca,ath9k" > + > +Optional properties: > +- reg: Address and length of the register set for the device. > +- qca,gpio-mask: The GPIO mask > +- qca,gpio-val: The GPIO value > +- qca,led-pin: The GPIO number to which the LED is connected > +- qca,led-active-high: The LED is active when the GPIO is HIGH > +- qca,clk-25mhz: Defines that at 25MHz clock is used > +- qca,no-eeprom: Indicates that there is on physical EEPROM connected Typo: ...Indicates that there is _no_ physical EEPROM... Thanks, -- Julian Calaby Email: julian.calaby at gmail.com Profile: http://www.google.com/profiles/julian.calaby/