From: Tobias Klauser <tklauser@distanz.ch>
To: Greg Kroah-Hartman <gregkh@suse.de>, devel@driverdev.osuosl.org
Cc: b.a.t.m.a.n@lists.open-mesh.org,
Marek Lindner <lindner_marek@yahoo.de>,
Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Subject: [B.A.T.M.A.N.] [PATCH] staging: batman-adv: Use linux/etherdevice.h address helper functions
Date: Wed, 3 Nov 2010 10:59:02 +0100 [thread overview]
Message-ID: <1288778342-10056-1-git-send-email-tklauser@distanz.ch> (raw)
Replace custom ethernet address check functions by calls to the helpers
in linux/etherdevice.h
In one case where the address was tested for broadcast and multicast
address, the broadcast address check can be omitted as broadcast is also
a multicast address.
The patch is only compile-tested.
Cc: Marek Lindner <lindner_marek@yahoo.de>
Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
---
drivers/staging/batman-adv/main.c | 12 +-----------
drivers/staging/batman-adv/main.h | 3 +--
drivers/staging/batman-adv/routing.c | 16 ++++++++--------
drivers/staging/batman-adv/soft-interface.c | 2 +-
drivers/staging/batman-adv/vis.c | 4 ++--
5 files changed, 13 insertions(+), 24 deletions(-)
diff --git a/drivers/staging/batman-adv/main.c b/drivers/staging/batman-adv/main.c
index 0587940..6ea6420 100644
--- a/drivers/staging/batman-adv/main.c
+++ b/drivers/staging/batman-adv/main.c
@@ -149,7 +149,7 @@ void dec_module_count(void)
int compare_orig(void *data1, void *data2)
{
- return (memcmp(data1, data2, ETH_ALEN) == 0 ? 1 : 0);
+ return (compare_ether_addr(data1, data2) == 0 ? 1 : 0);
}
/* hashfunction to choose an entry in a hash table of given size */
@@ -192,16 +192,6 @@ int is_my_mac(uint8_t *addr)
}
-int is_bcast(uint8_t *addr)
-{
- return (addr[0] == (uint8_t)0xff) && (addr[1] == (uint8_t)0xff);
-}
-
-int is_mcast(uint8_t *addr)
-{
- return *addr & 0x01;
-}
-
module_init(batman_init);
module_exit(batman_exit);
diff --git a/drivers/staging/batman-adv/main.h b/drivers/staging/batman-adv/main.h
index 5e3f516..14d567d 100644
--- a/drivers/staging/batman-adv/main.h
+++ b/drivers/staging/batman-adv/main.h
@@ -109,6 +109,7 @@
#include <linux/mutex.h> /* mutex */
#include <linux/module.h> /* needed by all modules */
#include <linux/netdevice.h> /* netdevice */
+#include <linux/etherdevice.h>
#include <linux/if_ether.h> /* ethernet header */
#include <linux/poll.h> /* poll_table */
#include <linux/kthread.h> /* kernel threads */
@@ -138,8 +139,6 @@ void dec_module_count(void);
int compare_orig(void *data1, void *data2);
int choose_orig(void *data, int32_t size);
int is_my_mac(uint8_t *addr);
-int is_bcast(uint8_t *addr);
-int is_mcast(uint8_t *addr);
#ifdef CONFIG_BATMAN_ADV_DEBUG
int debug_log(struct bat_priv *bat_priv, char *fmt, ...);
diff --git a/drivers/staging/batman-adv/routing.c b/drivers/staging/batman-adv/routing.c
index 9010263..d42c165 100644
--- a/drivers/staging/batman-adv/routing.c
+++ b/drivers/staging/batman-adv/routing.c
@@ -756,11 +756,11 @@ int recv_bat_packet(struct sk_buff *skb, struct batman_if *batman_if)
ethhdr = (struct ethhdr *)skb_mac_header(skb);
/* packet with broadcast indication but unicast recipient */
- if (!is_bcast(ethhdr->h_dest))
+ if (!is_broadcast_ether_addr(ethhdr->h_dest))
return NET_RX_DROP;
/* packet with broadcast sender address */
- if (is_bcast(ethhdr->h_source))
+ if (is_broadcast_ether_addr(ethhdr->h_source))
return NET_RX_DROP;
/* create a copy of the skb, if needed, to modify it. */
@@ -933,11 +933,11 @@ int recv_icmp_packet(struct sk_buff *skb, struct batman_if *recv_if)
ethhdr = (struct ethhdr *)skb_mac_header(skb);
/* packet with unicast indication but broadcast recipient */
- if (is_bcast(ethhdr->h_dest))
+ if (is_broadcast_ether_addr(ethhdr->h_dest))
return NET_RX_DROP;
/* packet with broadcast sender address */
- if (is_bcast(ethhdr->h_source))
+ if (is_broadcast_ether_addr(ethhdr->h_source))
return NET_RX_DROP;
/* not for me */
@@ -1107,11 +1107,11 @@ static int check_unicast_packet(struct sk_buff *skb, int hdr_size)
ethhdr = (struct ethhdr *)skb_mac_header(skb);
/* packet with unicast indication but broadcast recipient */
- if (is_bcast(ethhdr->h_dest))
+ if (is_broadcast_ether_addr(ethhdr->h_dest))
return -1;
/* packet with broadcast sender address */
- if (is_bcast(ethhdr->h_source))
+ if (is_broadcast_ether_addr(ethhdr->h_source))
return -1;
/* not for me */
@@ -1283,11 +1283,11 @@ int recv_bcast_packet(struct sk_buff *skb, struct batman_if *recv_if)
ethhdr = (struct ethhdr *)skb_mac_header(skb);
/* packet with broadcast indication but unicast recipient */
- if (!is_bcast(ethhdr->h_dest))
+ if (!is_broadcast_ether_addr(ethhdr->h_dest))
return NET_RX_DROP;
/* packet with broadcast sender address */
- if (is_bcast(ethhdr->h_source))
+ if (is_broadcast_ether_addr(ethhdr->h_source))
return NET_RX_DROP;
/* ignore broadcasts sent by myself */
diff --git a/drivers/staging/batman-adv/soft-interface.c b/drivers/staging/batman-adv/soft-interface.c
index 3904db9..820e141 100644
--- a/drivers/staging/batman-adv/soft-interface.c
+++ b/drivers/staging/batman-adv/soft-interface.c
@@ -140,7 +140,7 @@ int interface_tx(struct sk_buff *skb, struct net_device *soft_iface)
hna_local_add(soft_iface, ethhdr->h_source);
/* ethernet packet should be broadcasted */
- if (is_bcast(ethhdr->h_dest) || is_mcast(ethhdr->h_dest)) {
+ if (is_multicast_ether_addr(ethhdr->h_dest)) {
if (!bat_priv->primary_if)
goto dropped;
diff --git a/drivers/staging/batman-adv/vis.c b/drivers/staging/batman-adv/vis.c
index 3d2c1bc..c98a065 100644
--- a/drivers/staging/batman-adv/vis.c
+++ b/drivers/staging/batman-adv/vis.c
@@ -470,7 +470,7 @@ void receive_client_update_packet(struct bat_priv *bat_priv,
int are_target = 0;
/* clients shall not broadcast. */
- if (is_bcast(vis_packet->target_orig))
+ if (is_broadcast_ether_addr(vis_packet->target_orig))
return;
/* Are we the target for this VIS packet? */
@@ -747,7 +747,7 @@ static void send_vis_packet(struct bat_priv *bat_priv, struct vis_info *info)
ETH_ALEN);
packet->ttl--;
- if (is_bcast(packet->target_orig))
+ if (is_broadcast_ether_addr(packet->target_orig))
broadcast_vis_packet(bat_priv, info);
else
unicast_vis_packet(bat_priv, info);
--
1.7.0.4
next reply other threads:[~2010-11-03 9:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-03 9:59 Tobias Klauser [this message]
2010-11-03 10:12 ` [B.A.T.M.A.N.] [PATCH] staging: batman-adv: Use linux/etherdevice.h address helper functions Sven Eckelmann
2010-11-03 10:25 ` Tobias Klauser
2010-11-03 10:56 ` Sven Eckelmann
2010-11-03 11:04 ` Sven Eckelmann
2010-11-03 12:00 ` Marek Lindner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1288778342-10056-1-git-send-email-tklauser@distanz.ch \
--to=tklauser@distanz.ch \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@suse.de \
--cc=lindner_marek@yahoo.de \
--cc=siwu@hrz.tu-chemnitz.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).