b.a.t.m.a.n.lists.open-mesh.org archive mirror
 help / color / mirror / Atom feed
From: Andreas Pape <apape@phoenixcontact.com>
To: b.a.t.m.a.n@lists.open-mesh.org
Subject: [B.A.T.M.A.N.] [PATCHv2 4/7] batman-adv: drop unicast packets from other backbone gw
Date: Fri, 26 Feb 2016 14:18:54 +0100	[thread overview]
Message-ID: <1456492734-29785-1-git-send-email-apape@phoenixcontact.com> (raw)

Additional dropping of unicast packets received from another backbone gw of
the same backbone network before being forwarded to the same backbone again
is necessary. It was observed in a test setup that in rare cases these
frames lead to looping unicast traffic backbone->mesh->backbone.

Signed-off-by: Andreas Pape <apape@phoenixcontact.com>
---
 net/batman-adv/routing.c |   15 +++++++++++++++
 1 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c
index 4dd646a..606fd22 100644
--- a/net/batman-adv/routing.c
+++ b/net/batman-adv/routing.c
@@ -854,9 +854,11 @@ int batadv_recv_unicast_packet(struct sk_buff *skb,
 	int check, hdr_size = sizeof(*unicast_packet);
 	enum batadv_subtype subtype;
 	bool is4addr;
+	struct ethhdr *ethhdr;

 	unicast_packet = (struct batadv_unicast_packet *)skb->data;
 	unicast_4addr_packet = (struct batadv_unicast_4addr_packet *)skb->data;
+	ethhdr = eth_hdr(skb);

 	is4addr = unicast_packet->packet_type == BATADV_UNICAST_4ADDR;
 	/* the caller function should have already pulled 2 bytes */
@@ -896,6 +898,19 @@ int batadv_recv_unicast_packet(struct sk_buff *skb,
 			}
 		}

+		/* If this is a unicast packet from another backgone gw,
+		 * drop it.
+		 */
+		orig_addr = ethhdr->h_source;
+		orig_node = batadv_orig_hash_find(bat_priv, orig_addr);
+		if (batadv_bla_is_backbone_gw(skb, orig_node, hdr_size)) {
+			batadv_dbg(BATADV_DBG_BLA, bat_priv,
+				   "Dropped unicast pkt received from another backbone gw %pM.\n",
+				   orig_addr);
+
+			return NET_RX_DROP;
+		}
+
 		if (batadv_dat_snoop_incoming_arp_request(bat_priv, skb,
 							  hdr_size))
 			goto rx_success;
--
1.7.0.4



..................................................................
PHOENIX CONTACT ELECTRONICS GmbH

Sitz der Gesellschaft / registered office of the company: 31812 Bad Pyrmont
USt-Id-Nr.: DE811742156
Amtsgericht Hannover HRB 100528 / district court Hannover HRB 100528
Geschäftsführer / Executive Board: Roland Bent, Dr. Martin Heubeck
___________________________________________________________________
Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren, jegliche anderweitige Verwendung sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet.
----------------------------------------------------------------------------------------------------
This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure, distribution or other use of the material or parts thereof is strictly forbidden.
___________________________________________________________________

             reply	other threads:[~2016-02-26 13:18 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-26 13:18 Andreas Pape [this message]
2016-02-26 16:07 ` [B.A.T.M.A.N.] [PATCHv2 4/7] batman-adv: drop unicast packets from other backbone gw Sven Eckelmann
2016-03-10 15:03 ` Simon Wunderlich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1456492734-29785-1-git-send-email-apape@phoenixcontact.com \
    --to=apape@phoenixcontact.com \
    --cc=b.a.t.m.a.n@lists.open-mesh.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).