From: Sven Eckelmann <sven.eckelmann@open-mesh.com>
To: b.a.t.m.a.n@lists.open-mesh.org
Cc: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Subject: [B.A.T.M.A.N.] [PATCH v4 3/5] batman-adv: add netlink command to query generic mesh information files
Date: Wed, 4 May 2016 21:06:31 +0200 [thread overview]
Message-ID: <1462388793-8365-3-git-send-email-sven@open-mesh.com> (raw)
In-Reply-To: <4642303.DsCp7UQf8m@bentobox>
From: Matthias Schiffer <mschiffer@universe-factory.net>
BATADV_CMD_GET_MESH_INFO is used to query basic information about a
batman-adv softif (name, index and MAC address for both the softif and
the primary hardif; routing algorithm; batman-adv version).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
[sven.eckelmann@open-mesh.com: Reduce the number of changes to
BATADV_CMD_GET_MESH_INFO, add missing kerneldoc, add policy for attributes]
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
---
compat.h | 6 ++
include/uapi/linux/batman_adv.h | 18 ++++++
net/batman-adv/netlink.c | 135 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 159 insertions(+)
diff --git a/compat.h b/compat.h
index 5a5f478..7d5c8b6 100644
--- a/compat.h
+++ b/compat.h
@@ -62,6 +62,12 @@ static int __batadv_interface_kill_vid(struct net_device *dev, __be16 proto,\
#endif /* < KERNEL_VERSION(3, 3, 0) */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 7, 0)
+
+#define snd_portid snd_pid
+
+#endif /* < KERNEL_VERSION(3, 7, 0) */
+
#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 9, 0)
#define batadv_interface_set_mac_addr(x, y) \
diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index ba611a7..a908140 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -24,12 +24,28 @@
* enum batadv_nl_attrs - batman-adv netlink attributes
*
* @BATADV_ATTR_UNSPEC: unspecified attribute to catch errors
+ * @BATADV_ATTR_VERSION: batman-adv version string
+ * @BATADV_ATTR_ALGO_NAME: name of routing algorithm
+ * @BATADV_ATTR_MESH_IFINDEX: index of the batman-adv interface
+ * @BATADV_ATTR_MESH_IFNAME: name of the batman-adv interface
+ * @BATADV_ATTR_MESH_ADDRESS: mac address of the batman-adv interface
+ * @BATADV_ATTR_HARD_IFINDEX: index of the non-batman-adv interface
+ * @BATADV_ATTR_HARD_IFNAME: name of the non-batman-adv interface
+ * @BATADV_ATTR_HARD_ADDRESS: mac address of the non-batman-adv interface
* @__BATADV_ATTR_AFTER_LAST: internal use
* @NUM_BATADV_ATTR: total number of batadv_nl_attrs available
* @BATADV_ATTR_MAX: highest attribute number currently defined
*/
enum batadv_nl_attrs {
BATADV_ATTR_UNSPEC,
+ BATADV_ATTR_VERSION,
+ BATADV_ATTR_ALGO_NAME,
+ BATADV_ATTR_MESH_IFINDEX,
+ BATADV_ATTR_MESH_IFNAME,
+ BATADV_ATTR_MESH_ADDRESS,
+ BATADV_ATTR_HARD_IFINDEX,
+ BATADV_ATTR_HARD_IFNAME,
+ BATADV_ATTR_HARD_ADDRESS,
/* add attributes above here, update the policy in netlink.c */
__BATADV_ATTR_AFTER_LAST,
NUM_BATADV_ATTR = __BATADV_ATTR_AFTER_LAST,
@@ -40,11 +56,13 @@ enum batadv_nl_attrs {
* enum batadv_nl_commands - supported batman-adv netlink commands
*
* @BATADV_CMD_UNSPEC: unspecified command to catch errors
+ * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv device
* @__BATADV_CMD_AFTER_LAST: internal use
* @BATADV_CMD_MAX: highest used command number
*/
enum batadv_nl_commands {
BATADV_CMD_UNSPEC,
+ BATADV_CMD_GET_MESH_INFO,
/* add new commands above here */
__BATADV_CMD_AFTER_LAST,
BATADV_CMD_MAX = __BATADV_CMD_AFTER_LAST - 1
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index af3e87e..568523c 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -18,12 +18,24 @@
#include "main.h"
#include "netlink.h"
+#include <linux/errno.h>
+#include <linux/fs.h>
#include <linux/genetlink.h>
+#include <linux/if_ether.h>
#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/netlink.h>
+#include <linux/stddef.h>
#include <linux/printk.h>
#include <net/genetlink.h>
+#include <net/netlink.h>
#include <uapi/linux/batman_adv.h>
+#include "hard-interface.h"
+#include "soft-interface.h"
+
+struct sk_buff;
+
static struct genl_family batadv_netlink_family = {
.id = GENL_ID_GENERATE,
.hdrsize = 0,
@@ -32,7 +44,130 @@ static struct genl_family batadv_netlink_family = {
.maxattr = BATADV_ATTR_MAX,
};
+static struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
+ [BATADV_ATTR_VERSION] = { .type = NLA_STRING },
+ [BATADV_ATTR_ALGO_NAME] = { .type = NLA_STRING },
+ [BATADV_ATTR_MESH_IFINDEX] = { .type = NLA_U32 },
+ [BATADV_ATTR_MESH_IFNAME] = { .type = NLA_STRING },
+ [BATADV_ATTR_MESH_ADDRESS] = { .len = ETH_ALEN },
+ [BATADV_ATTR_HARD_IFINDEX] = { .type = NLA_U32 },
+ [BATADV_ATTR_HARD_IFNAME] = { .type = NLA_STRING },
+ [BATADV_ATTR_HARD_ADDRESS] = { .len = ETH_ALEN },
+};
+
+/**
+ * batadv_netlink_mesh_info_put - Fill generic information about mesh interface
+ * @msg: netlink message to be sent back
+ * @soft_iface: interface for which the data should be taken
+ *
+ * Return: 0 on success, < 0 on error
+ */
+static int
+batadv_netlink_mesh_info_put(struct sk_buff *msg, struct net_device *soft_iface)
+{
+ struct batadv_priv *bat_priv = netdev_priv(soft_iface);
+ struct batadv_hard_iface *primary_if = NULL;
+ struct net_device *hard_iface;
+ int ret = -ENOBUFS;
+
+ if (nla_put_string(msg, BATADV_ATTR_VERSION, BATADV_SOURCE_VERSION) ||
+ nla_put_string(msg, BATADV_ATTR_ALGO_NAME,
+ bat_priv->bat_algo_ops->name) ||
+ nla_put_u32(msg, BATADV_ATTR_MESH_IFINDEX, soft_iface->ifindex) ||
+ nla_put_string(msg, BATADV_ATTR_MESH_IFNAME, soft_iface->name) ||
+ nla_put(msg, BATADV_ATTR_MESH_ADDRESS, ETH_ALEN,
+ soft_iface->dev_addr))
+ goto out;
+
+ primary_if = batadv_primary_if_get_selected(bat_priv);
+ if (primary_if && primary_if->if_status == BATADV_IF_ACTIVE) {
+ hard_iface = primary_if->net_dev;
+
+ if (nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX,
+ hard_iface->ifindex) ||
+ nla_put_string(msg, BATADV_ATTR_HARD_IFNAME,
+ hard_iface->name) ||
+ nla_put(msg, BATADV_ATTR_HARD_ADDRESS, ETH_ALEN,
+ hard_iface->dev_addr))
+ goto out;
+ }
+
+ ret = 0;
+
+ out:
+ if (primary_if)
+ batadv_hardif_put(primary_if);
+
+ return ret;
+}
+
+/**
+ * batadv_netlink_mesh_info_put - Handle BATADV_CMD_GET_MESH_INFO
+ * @skb: received netlink message
+ * @info: receiver information
+ *
+ * Return: 0 on success, < 0 on error
+ */
+static int
+batadv_netlink_get_mesh_info(struct sk_buff *skb, struct genl_info *info)
+{
+ struct net *net = genl_info_net(info);
+ struct net_device *soft_iface;
+ struct sk_buff *msg = NULL;
+ void *msg_head;
+ int ifindex;
+ int ret;
+
+ if (!info->attrs[BATADV_ATTR_MESH_IFINDEX])
+ return -EINVAL;
+
+ ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]);
+ if (!ifindex)
+ return -EINVAL;
+
+ soft_iface = dev_get_by_index(net, ifindex);
+ if (!soft_iface || !batadv_softif_is_valid(soft_iface)) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ if (!msg) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ msg_head = genlmsg_put(msg, info->snd_portid, info->snd_seq,
+ &batadv_netlink_family, 0,
+ BATADV_CMD_GET_MESH_INFO);
+ if (!msg_head) {
+ ret = -ENOBUFS;
+ goto out;
+ }
+
+ ret = batadv_netlink_mesh_info_put(msg, soft_iface);
+
+ out:
+ if (soft_iface)
+ dev_put(soft_iface);
+
+ if (ret) {
+ if (msg)
+ nlmsg_free(msg);
+ return ret;
+ }
+
+ genlmsg_end(msg, msg_head);
+ return genlmsg_reply(msg, info);
+}
+
static struct genl_ops batadv_netlink_ops[] = {
+ {
+ .cmd = BATADV_CMD_GET_MESH_INFO,
+ .flags = GENL_ADMIN_PERM,
+ .policy = batadv_netlink_policy,
+ .doit = batadv_netlink_get_mesh_info,
+ },
};
/**
--
2.8.1
next prev parent reply other threads:[~2016-05-04 19:06 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-04 19:02 [B.A.T.M.A.N.] [RFC v4] throughput meter on steroids^W netlink Sven Eckelmann
2016-05-04 19:06 ` [B.A.T.M.A.N.] [PATCH v4 1/5] batman-adv: Add stripped down version of MAINTAINERS file Sven Eckelmann
2016-05-04 19:06 ` [B.A.T.M.A.N.] [PATCH v4 2/5] batman-adv: add generic netlink family for batman-adv Sven Eckelmann
2016-05-04 19:06 ` Sven Eckelmann [this message]
2016-05-04 19:06 ` [B.A.T.M.A.N.] [PATCH v4 4/5] batman-adv: return netdev status in the TX path Sven Eckelmann
2016-05-04 19:06 ` [B.A.T.M.A.N.] [PATCH v4 5/5] batman-adv: throughput meter implementation Sven Eckelmann
2016-05-04 19:07 ` [B.A.T.M.A.N.] [PATCH v4 1/4] batctl: Split list of objects in Makefile into separate lines Sven Eckelmann
2016-05-04 19:07 ` [B.A.T.M.A.N.] [PATCH v4 2/4] batctl: Add basic infrastructure to integrate netlink Sven Eckelmann
2016-05-04 19:07 ` [B.A.T.M.A.N.] [PATCH v4 3/4] batctl: Add attributes/command for BATADV_CMD_GET_MESH_INFO Sven Eckelmann
2016-05-04 19:07 ` [B.A.T.M.A.N.] [PATCH v4 4/4] batctl: introduce throughput meter support Sven Eckelmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462388793-8365-3-git-send-email-sven@open-mesh.com \
--to=sven.eckelmann@open-mesh.com \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).