From: "Linus Lüssing" <linus.luessing@c0d3.blue>
To: b.a.t.m.a.n@lists.open-mesh.org
Subject: [B.A.T.M.A.N.] [PATCHv4 2/2] batctl: adding mcast flags debugfs table
Date: Fri, 13 May 2016 17:30:16 +0200 [thread overview]
Message-ID: <1463153416-6569-2-git-send-email-linus.luessing@c0d3.blue> (raw)
In-Reply-To: <1463153416-6569-1-git-send-email-linus.luessing@c0d3.blue>
From: Linus Lüssing <linus.luessing@web.de>
This patch adds an option to retrieve the per originator multicast
flags table.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
---
Changes in v4:
* rebase to current master (no conflicts)
Changes in v3:
* updated mcast_flags example in README file
Changes in v2:
* header_lines for 'mcast_flags' increased from 2 to 6
* Example updated to more verbose, 6 lines debugfs header output
* (kept order for the noted manpage section as it wasn't alphabetically
orderd in the first place - instead keeping the previous "logical"
order - 'mcast' after 'nc')
README | 34 ++++++++++++++++++++++++++++++++++
debug.c | 6 ++++++
debug.h | 1 +
functions.c | 1 +
man/batctl.8 | 3 +++
5 files changed, 45 insertions(+)
diff --git a/README b/README
index b5de8a6..f92bc26 100644
--- a/README
+++ b/README
@@ -426,6 +426,40 @@ display or modify the multicast mode setting
Usage: batctl multicast_mode|mm [0|1]
+batctl mcast_flags
+=================
+
+display the local D.A.T. cache
+
+Usage batctl mcast_flags|mf
+
+Example:
+
+Multicast flags (own flags: [U46])
+* Bridged [U] U
+* No IGMP/MLD Querier [4/6]: ./.
+* Shadowing IGMP/MLD Querier [4/6]: 4/6
+-------------------------------------------
+ Originator Flags
+02:04:64:a4:39:c1 [U..]
+02:04:64:a4:39:c2 [U..]
+02:04:64:a4:39:c3 [...]
+
+where:
+- Originator: the MAC address of the originating (primary interface)
+ batman-adv node
+- Flags: multicast flags of the according node
+- U: wants all unsnoopable multicast traffic, meaning other nodes need to always
+ forward any multicast traffic destined to ff02::1 or 224.0.0.0/24 to it
+- 4: wants all IPv4 multicast traffic, meaning other nodes need to always
+ forward any IPv4 multicast traffic to it
+- 6: wants all IPv6 multicast traffic, meaning other nodes need to always
+ forward any IPv6 multicast traffic to it
+
+If a node does not have multicast optimizations available (e.g. old batman-adv
+version or optimizations not compiled in), therefore not announcing any
+multicast tvlv/flags, a '-' will be displayed instead of '[...]'.
+
batctl aggregation
==================
diff --git a/debug.c b/debug.c
index 3db3ed9..5b280cb 100644
--- a/debug.c
+++ b/debug.c
@@ -84,6 +84,12 @@ const struct debug_table_data batctl_debug_tables[BATCTL_TABLE_NUM] = {
.debugfs_name = "nc_nodes",
.header_lines = 0,
},
+ {
+ .opt_long = "mcast_flags",
+ .opt_short = "mf",
+ .debugfs_name = "mcast_flags",
+ .header_lines = 6,
+ },
};
static void debug_table_usage(int debug_table)
diff --git a/debug.h b/debug.h
index df65f50..46e8c3c 100644
--- a/debug.h
+++ b/debug.h
@@ -40,6 +40,7 @@ enum batctl_debug_tables {
BATCTL_TABLE_BLA_BACKBONES,
BATCTL_TABLE_DAT,
BATCTL_TABLE_NETWORK_CODING_NODES,
+ BATCTL_TABLE_MCAST_FLAGS,
BATCTL_TABLE_NUM,
};
diff --git a/functions.c b/functions.c
index be8f8b0..97a6dbd 100644
--- a/functions.c
+++ b/functions.c
@@ -68,6 +68,7 @@ const char *fs_compile_out_param[] = {
batctl_debug_tables[BATCTL_TABLE_BLA_BACKBONES].debugfs_name,
batctl_debug_tables[BATCTL_TABLE_DAT].debugfs_name,
batctl_debug_tables[BATCTL_TABLE_NETWORK_CODING_NODES].debugfs_name,
+ batctl_debug_tables[BATCTL_TABLE_MCAST_FLAGS].debugfs_name,
NULL,
};
diff --git a/man/batctl.8 b/man/batctl.8
index f8955d0..05f68d3 100644
--- a/man/batctl.8
+++ b/man/batctl.8
@@ -236,6 +236,9 @@ List of debug tables:
.RS 10
\- nc_nodes|nn (compile time option)
.RE
+.RS 10
+\- mcast_flags|mf (compile time option)
+.RE
.RE
.br
.IP "\fBtranslate\fP|\fBt\fP \fBMAC_address\fP|\fBbat\-host_name\fP|\fBhost_name\fP|\fBIP_address\fP"
--
1.7.10.4
next prev parent reply other threads:[~2016-05-13 15:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-13 15:30 [B.A.T.M.A.N.] [PATCHv4 1/2] batctl: adding multicast debug level Linus Lüssing
2016-05-13 15:30 ` Linus Lüssing [this message]
2016-05-13 15:59 ` [B.A.T.M.A.N.] [PATCHv4 2/2] batctl: adding mcast flags debugfs table Simon Wunderlich
2016-05-17 8:08 ` [B.A.T.M.A.N.] [PATCHv4 1/2] batctl: adding multicast debug level Marek Lindner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463153416-6569-2-git-send-email-linus.luessing@c0d3.blue \
--to=linus.luessing@c0d3.blue \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).