b.a.t.m.a.n.lists.open-mesh.org archive mirror
 help / color / mirror / Atom feed
From: Sven Eckelmann <sven@narfation.org>
To: b.a.t.m.a.n@lists.open-mesh.org
Subject: [B.A.T.M.A.N.] [PATCH maint v2 2/3] batman-adv: Keep fragments equally sized
Date: Sat,  4 Mar 2017 17:29:25 +0100	[thread overview]
Message-ID: <20170304162925.559-1-sven@narfation.org> (raw)
In-Reply-To: <20170304153331.22420-2-sven@narfation.org>

The batman-adv fragmentation packets have the design problem that they
cannot be refragmented and cannot handle padding by the underlying link.
The latter often leads to problems when networks are incorrectly configured
and don't use a common MTU.

The sender could for example fragment a 1271 byte frame (plus external
ethernet header (14) and batadv unicast header (10)) to fit in a 1280 bytes
large MTU of the underlying link (max. 1294 byte frames). This would create
a 1294 bytes large frame (fragment 2) and a 55 bytes large frame
(fragment 1). The extra 54 bytes are the fragment header (20) added to each
fragment and the external ethernet header (14) for the second fragment.

Let us assume that the next hop is then not able to transport 1294 bytes to
its next hop. The 1294 byte large frame will be dropped but the 55 bytes
large fragment will still be forwarded to its destination.

Or let us assume that the underlying hardware requires that each frame has
a minimum size (e.g. 60 bytes). Then it will pad the 55 bytes frame to 60
bytes. The receiver of the 60 bytes frame will no longer be able to
correctly assemble the two frames together because it is not aware that 5
bytes of the 60 bytes frame are padding and don't belong to the reassembled
frame.

This can partly be avoided by splitting frames more equally. In this
example, the 675 and 674 bytes large fragment frames could both potentially
reach its destination without being too large or too small.

Reported-by: Martin Weinelt <martin@darmstadt.freifunk.net>
Fixes: db56e4ecf5c2 ("batman-adv: Fragment and send skbs larger than mtu")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Acked-by: Linus Lüssing <linus.luessing@c0d3.blue>
---
 net/batman-adv/fragmentation.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

Cc: Matthias Schiffer <mschiffer@universe-factory.net>

v2:

 - rewrite commit message to include the header to the ethernet frame size

diff --git a/net/batman-adv/fragmentation.c b/net/batman-adv/fragmentation.c
index 11a23fd6..8f964bea 100644
--- a/net/batman-adv/fragmentation.c
+++ b/net/batman-adv/fragmentation.c
@@ -404,7 +404,7 @@ bool batadv_frag_skb_fwd(struct sk_buff *skb,
  * batadv_frag_create - create a fragment from skb
  * @skb: skb to create fragment from
  * @frag_head: header to use in new fragment
- * @mtu: size of new fragment
+ * @fragment_size: size of new fragment
  *
  * Split the passed skb into two fragments: A new one with size matching the
  * passed mtu and the old one with the rest. The new skb contains data from the
@@ -414,11 +414,11 @@ bool batadv_frag_skb_fwd(struct sk_buff *skb,
  */
 static struct sk_buff *batadv_frag_create(struct sk_buff *skb,
 					  struct batadv_frag_packet *frag_head,
-					  unsigned int mtu)
+					  unsigned int fragment_size)
 {
 	struct sk_buff *skb_fragment;
 	unsigned int header_size = sizeof(*frag_head);
-	unsigned int fragment_size = mtu - header_size;
+	unsigned int mtu = fragment_size + header_size;
 
 	skb_fragment = netdev_alloc_skb(NULL, mtu + ETH_HLEN);
 	if (!skb_fragment)
@@ -456,7 +456,7 @@ int batadv_frag_send_packet(struct sk_buff *skb,
 	struct sk_buff *skb_fragment;
 	unsigned int mtu = neigh_node->if_incoming->net_dev->mtu;
 	unsigned int header_size = sizeof(frag_header);
-	unsigned int max_fragment_size, max_packet_size;
+	unsigned int max_fragment_size, num_fragments;
 	int ret;
 
 	/* To avoid merge and refragmentation at next-hops we never send
@@ -464,10 +464,15 @@ int batadv_frag_send_packet(struct sk_buff *skb,
 	 */
 	mtu = min_t(unsigned int, mtu, BATADV_FRAG_MAX_FRAG_SIZE);
 	max_fragment_size = mtu - header_size;
-	max_packet_size = max_fragment_size * BATADV_FRAG_MAX_FRAGMENTS;
+
+	if (skb->len == 0 || max_fragment_size == 0)
+		return -EINVAL;
+
+	num_fragments = (skb->len - 1) / max_fragment_size + 1;
+	max_fragment_size = (skb->len - 1) / num_fragments + 1;
 
 	/* Don't even try to fragment, if we need more than 16 fragments */
-	if (skb->len > max_packet_size) {
+	if (num_fragments > BATADV_FRAG_MAX_FRAGMENTS) {
 		ret = -EAGAIN;
 		goto free_skb;
 	}
@@ -507,7 +512,8 @@ int batadv_frag_send_packet(struct sk_buff *skb,
 			goto put_primary_if;
 		}
 
-		skb_fragment = batadv_frag_create(skb, &frag_header, mtu);
+		skb_fragment = batadv_frag_create(skb, &frag_header,
+						  max_fragment_size);
 		if (!skb_fragment) {
 			ret = -ENOMEM;
 			goto put_primary_if;
-- 
2.11.0


  parent reply	other threads:[~2017-03-04 16:29 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-04 15:32 [B.A.T.M.A.N.] [PATCH maint 0/3] batman-adv: 2017.0 bugfixes Sven Eckelmann
2017-03-04 15:33 ` [B.A.T.M.A.N.] [PATCH maint 1/3] batman-adv: average: change to declare precision, not factor Sven Eckelmann
2017-03-04 15:33   ` [B.A.T.M.A.N.] [PATCH maint 2/3] batman-adv: Keep fragments equally sized Sven Eckelmann
2017-03-04 16:00     ` Matthias Schiffer
2017-03-04 16:29     ` Sven Eckelmann [this message]
2017-03-04 15:33   ` [B.A.T.M.A.N.] [PATCH maint 3/3] batman-adv: Initialize gw sel_class via batadv_algo Sven Eckelmann
2017-03-07 15:45 ` [B.A.T.M.A.N.] [PATCH maint 0/3] batman-adv: 2017.0 bugfixes Simon Wunderlich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170304162925.559-1-sven@narfation.org \
    --to=sven@narfation.org \
    --cc=b.a.t.m.a.n@lists.open-mesh.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).