From: Sven Eckelmann <sven@narfation.org>
To: b.a.t.m.a.n@lists.open-mesh.org
Cc: Sven Eckelmann <sven@narfation.org>
Subject: [PATCH] batman-adv: Always send iface index+name in genlmsg
Date: Mon, 10 May 2021 15:05:42 +0200 [thread overview]
Message-ID: <20210510130542.40833-1-sven@narfation.org> (raw)
The batman-adv netlink messages often contain the interface index and
interface name in the same message. This makes it easy for the receiver to
operate on the incoming data when it either needs to print something or
needs to operate on the interface index.
But one of the attributes was missing for:
* neighbor table dumps
* originator table dumps
* gateway list dumps
* query of hardif information
* query of vid information
The userspace therefore had to implement special workarounds using
SIOCGIFNAME or SIOCGIFINDEX depending on what was actually provided.
Providing both information simplifies the userspace code massively without
adding a lot of extra overhead in the kernel portion.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
net/batman-adv/bat_iv_ogm.c | 6 ++++++
net/batman-adv/bat_v.c | 10 ++++++++++
net/batman-adv/netlink.c | 8 ++++++++
3 files changed, 24 insertions(+)
diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c
index 789f257b..680def80 100644
--- a/net/batman-adv/bat_iv_ogm.c
+++ b/net/batman-adv/bat_iv_ogm.c
@@ -1849,6 +1849,8 @@ batadv_iv_ogm_orig_dump_subentry(struct sk_buff *msg, u32 portid, u32 seq,
orig_node->orig) ||
nla_put(msg, BATADV_ATTR_NEIGH_ADDRESS, ETH_ALEN,
neigh_node->addr) ||
+ nla_put_string(msg, BATADV_ATTR_HARD_IFNAME,
+ neigh_node->if_incoming->net_dev->name) ||
nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX,
neigh_node->if_incoming->net_dev->ifindex) ||
nla_put_u8(msg, BATADV_ATTR_TQ, tq_avg) ||
@@ -2078,6 +2080,8 @@ batadv_iv_ogm_neigh_dump_neigh(struct sk_buff *msg, u32 portid, u32 seq,
if (nla_put(msg, BATADV_ATTR_NEIGH_ADDRESS, ETH_ALEN,
hardif_neigh->addr) ||
+ nla_put_string(msg, BATADV_ATTR_HARD_IFNAME,
+ hardif_neigh->if_incoming->net_dev->name) ||
nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX,
hardif_neigh->if_incoming->net_dev->ifindex) ||
nla_put_u32(msg, BATADV_ATTR_LAST_SEEN_MSECS,
@@ -2459,6 +2463,8 @@ static int batadv_iv_gw_dump_entry(struct sk_buff *msg, u32 portid,
router->addr) ||
nla_put_string(msg, BATADV_ATTR_HARD_IFNAME,
router->if_incoming->net_dev->name) ||
+ nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX,
+ router->if_incoming->net_dev->ifindex) ||
nla_put_u32(msg, BATADV_ATTR_BANDWIDTH_DOWN,
gw_node->bandwidth_down) ||
nla_put_u32(msg, BATADV_ATTR_BANDWIDTH_UP,
diff --git a/net/batman-adv/bat_v.c b/net/batman-adv/bat_v.c
index e1ca2b8c..b98aea95 100644
--- a/net/batman-adv/bat_v.c
+++ b/net/batman-adv/bat_v.c
@@ -146,6 +146,8 @@ batadv_v_neigh_dump_neigh(struct sk_buff *msg, u32 portid, u32 seq,
if (nla_put(msg, BATADV_ATTR_NEIGH_ADDRESS, ETH_ALEN,
hardif_neigh->addr) ||
+ nla_put_string(msg, BATADV_ATTR_HARD_IFNAME,
+ hardif_neigh->if_incoming->net_dev->name) ||
nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX,
hardif_neigh->if_incoming->net_dev->ifindex) ||
nla_put_u32(msg, BATADV_ATTR_LAST_SEEN_MSECS,
@@ -298,6 +300,8 @@ batadv_v_orig_dump_subentry(struct sk_buff *msg, u32 portid, u32 seq,
if (nla_put(msg, BATADV_ATTR_ORIG_ADDRESS, ETH_ALEN, orig_node->orig) ||
nla_put(msg, BATADV_ATTR_NEIGH_ADDRESS, ETH_ALEN,
neigh_node->addr) ||
+ nla_put_string(msg, BATADV_ATTR_HARD_IFNAME,
+ neigh_node->if_incoming->net_dev->name) ||
nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX,
neigh_node->if_incoming->net_dev->ifindex) ||
nla_put_u32(msg, BATADV_ATTR_THROUGHPUT, throughput) ||
@@ -739,6 +743,12 @@ static int batadv_v_gw_dump_entry(struct sk_buff *msg, u32 portid,
goto out;
}
+ if (nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX,
+ router->if_incoming->net_dev->ifindex)) {
+ genlmsg_cancel(msg, hdr);
+ goto out;
+ }
+
if (nla_put_u32(msg, BATADV_ATTR_BANDWIDTH_DOWN,
gw_node->bandwidth_down)) {
genlmsg_cancel(msg, hdr);
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index f317d206..b6cc746e 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -814,6 +814,10 @@ static int batadv_netlink_hardif_fill(struct sk_buff *msg,
bat_priv->soft_iface->ifindex))
goto nla_put_failure;
+ if (nla_put_string(msg, BATADV_ATTR_MESH_IFNAME,
+ bat_priv->soft_iface->name))
+ goto nla_put_failure;
+
if (nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX,
net_dev->ifindex) ||
nla_put_string(msg, BATADV_ATTR_HARD_IFNAME,
@@ -1045,6 +1049,10 @@ static int batadv_netlink_vlan_fill(struct sk_buff *msg,
bat_priv->soft_iface->ifindex))
goto nla_put_failure;
+ if (nla_put_string(msg, BATADV_ATTR_MESH_IFNAME,
+ bat_priv->soft_iface->name))
+ goto nla_put_failure;
+
if (nla_put_u32(msg, BATADV_ATTR_VLANID, vlan->vid & VLAN_VID_MASK))
goto nla_put_failure;
--
2.30.2
reply other threads:[~2021-05-10 13:05 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210510130542.40833-1-sven@narfation.org \
--to=sven@narfation.org \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).