b.a.t.m.a.n.lists.open-mesh.org archive mirror
 help / color / mirror / Atom feed
From: Sven Eckelmann <sven@narfation.org>
To: b.a.t.m.a.n@lists.open-mesh.org
Cc: "Linus Lüssing" <linus.luessing@c0d3.blue>
Subject: Re: [PATCH v3 3/5] batman-adv: mcast: implement multicast packet reception and forwarding
Date: Tue, 27 Dec 2022 10:07:36 +0100	[thread overview]
Message-ID: <8399468.NyiUUSuA9g@sven-l14> (raw)
In-Reply-To: <20221226204237.10403-4-linus.luessing@c0d3.blue>

[-- Attachment #1: Type: text/plain, Size: 2120 bytes --]

On Monday, 26 December 2022 21:42:35 CET Linus Lüssing wrote:
> Implement functionality to receive and forward a new TVLV capable
> multicast packet type.
> 
> The new batman-adv multicast packet type allows to contain several
> originator destination addresses within a TVLV. Routers on the way will
> potentially split the batman-adv multicast packet and adjust its tracker
> TVLV contents.
> 
> Routing decisions are still based on the selected BATMAN IV or BATMAN V
> routing algorithm. So this new batman-adv multicast packet type retains
> the same loop-free properties.
> 
> Also a new OGM multicast TVLV flag is introduced to signal to other
> nodes that we are capable of handling a batman-adv multicast packet and
> multicast tracker TVLV. And that all of our hard interfaces have an MTU
> of at least 1280 bytes (IPv6 minimum MTU), as a simple solution for now
> to avoid MTU issues while forwarding.
> 
> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
> ---
>  include/uapi/linux/batadv_packet.h |  48 ++++-
>  net/batman-adv/Makefile            |   1 +
>  net/batman-adv/main.c              |   2 +
>  net/batman-adv/multicast.c         |  48 ++++-
>  net/batman-adv/multicast.h         |   5 +
>  net/batman-adv/multicast_forw.c    | 274 +++++++++++++++++++++++++++++
>  net/batman-adv/originator.c        |   1 +
>  net/batman-adv/routing.c           |  68 +++++++
>  net/batman-adv/routing.h           |  11 ++
>  net/batman-adv/soft-interface.c    |  12 ++
>  net/batman-adv/types.h             |  64 +++++++
>  11 files changed, 523 insertions(+), 11 deletions(-)
>  create mode 100644 net/batman-adv/multicast_forw.c

ecsv/pu: checkpatch ./net/batman-adv/multicast_forw.c
-----------------------------------------------------

    CHECK: Macro argument reuse 'num_dests' - possible side-effects?
    #25: FILE: ./net/batman-adv/multicast_forw.c:25:
    +#define batadv_mcast_forw_tracker_for_each_dest(dest, num_dests) \
    +   for (; num_dests; num_dests--, (dest) += ETH_ALEN)
    
    total: 0 errors, 0 warnings, 1 checks, 274 lines checked


[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  reply	other threads:[~2022-12-27  9:07 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-26 20:42 [PATCH v3 0/5] Implementation of a Stateless Multicast Packet Type Linus Lüssing
2022-12-26 20:42 ` [PATCH v3 1/5] batman-adv: mcast: remove now redundant single ucast forwarding Linus Lüssing
2022-12-26 20:42 ` [PATCH v3 2/5] batman-adv: tvlv: prepare for tvlv enabled multicast packet type Linus Lüssing
2022-12-26 20:42 ` [PATCH v3 3/5] batman-adv: mcast: implement multicast packet reception and forwarding Linus Lüssing
2022-12-27  9:07   ` Sven Eckelmann [this message]
2022-12-27 11:58     ` Linus Lüssing
2022-12-27 12:47       ` Sven Eckelmann
2022-12-26 20:42 ` [PATCH v3 4/5] batman-adv: mcast: implement multicast packet generation Linus Lüssing
2022-12-27  9:34   ` Sven Eckelmann
2022-12-26 20:42 ` [PATCH v3 5/5] batman-adv: mcast: shrink tracker packet after scrubbing Linus Lüssing
2022-12-27 10:46   ` Sven Eckelmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8399468.NyiUUSuA9g@sven-l14 \
    --to=sven@narfation.org \
    --cc=b.a.t.m.a.n@lists.open-mesh.org \
    --cc=linus.luessing@c0d3.blue \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).