From: "Elijah Newren via GitGitGadget" <gitgitgadget@gmail.com>
To: git@vger.kernel.org
Cc: Johannes.Schindelin@gmx.de, phillip.wood@dunelm.org.uk,
liu.denton@gmail.com, gitster@pobox.com, plroskin@gmail.com,
alban.gruin@gmail.com, szeder.dev@gmail.com, jrnieder@gmail.com,
emilyshaffer@google.com, Elijah Newren <newren@gmail.com>,
Elijah Newren <newren@gmail.com>
Subject: [PATCH v5 09/20] t3432: make these tests work with either am or merge backends
Date: Sat, 15 Feb 2020 21:36:30 +0000 [thread overview]
Message-ID: <bcd04ec4ded1858a6e1d2292bbc0d34ec28c2f57.1581802602.git.gitgitgadget@gmail.com> (raw)
In-Reply-To: <pull.679.v5.git.git.1581802602.gitgitgadget@gmail.com>
From: Elijah Newren <newren@gmail.com>
t3432 had several stress tests for can_fast_forward(), whose intent was
to ensure we were using the optimization of just fast forwarding when
possible. However, these tests verified that fast forwards had happened
based on the output that rebase printed to the terminal. We can instead
test more directly that we actually fast-forwarded by checking the
reflog, which also has the side effect of making the tests applicable
for the merge/interactive backend.
This change does lose the distinction between "noop" and "noop-force",
but as stated in commit c9efc216830f ("t3432: test for --no-ff's
interaction with fast-forward", 2019-08-27) which introduced that
distinction: "These tests aren't supposed to endorse the status quo,
just test for what we're currently doing.".
This change does not actually run these tests with the merge/interactive
backend; instead this is just a preparatory commit. A subsequent commit
which fixes can_fast_forward() to work with that backend will then also
change t3432 to add tests of that backend as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
---
t/t3432-rebase-fast-forward.sh | 48 ++++++++++++++++------------------
1 file changed, 22 insertions(+), 26 deletions(-)
diff --git a/t/t3432-rebase-fast-forward.sh b/t/t3432-rebase-fast-forward.sh
index 92f95b57da1..7432c0e2415 100755
--- a/t/t3432-rebase-fast-forward.sh
+++ b/t/t3432-rebase-fast-forward.sh
@@ -44,19 +44,15 @@ test_rebase_same_head_ () {
test_expect_$status "git rebase$flag $* with $changes is $what with $cmp HEAD" "
oldhead=\$(git rev-parse HEAD) &&
test_when_finished 'git reset --hard \$oldhead' &&
+ cp .git/logs/HEAD expect &&
git rebase$flag $* >stdout &&
if test $what = work
then
- # Must check this case first, for 'is up to
- # date, rebase forced[...]rewinding head' cases
- test_i18ngrep 'rewinding head' stdout
+ old=\$(wc -l <expect) &&
+ test_line_count '-gt' \$old .git/logs/HEAD
elif test $what = noop
then
- test_i18ngrep 'is up to date' stdout &&
- test_i18ngrep ! 'rebase forced' stdout
- elif test $what = noop-force
- then
- test_i18ngrep 'is up to date, rebase forced' stdout
+ test_cmp expect .git/logs/HEAD
fi &&
newhead=\$(git rev-parse HEAD) &&
if test $cmp = same
@@ -71,14 +67,14 @@ test_rebase_same_head_ () {
changes='no changes'
test_rebase_same_head success noop same success work same
-test_rebase_same_head success noop same success noop-force same master
-test_rebase_same_head success noop same success noop-force diff --onto B B
-test_rebase_same_head success noop same success noop-force diff --onto B... B
-test_rebase_same_head success noop same success noop-force same --onto master... master
-test_rebase_same_head success noop same success noop-force same --keep-base master
-test_rebase_same_head success noop same success noop-force same --keep-base
-test_rebase_same_head success noop same success noop-force same --no-fork-point
-test_rebase_same_head success noop same success noop-force same --keep-base --no-fork-point
+test_rebase_same_head success noop same success work same master
+test_rebase_same_head success noop same success work diff --onto B B
+test_rebase_same_head success noop same success work diff --onto B... B
+test_rebase_same_head success noop same success work same --onto master... master
+test_rebase_same_head success noop same success work same --keep-base master
+test_rebase_same_head success noop same success work same --keep-base
+test_rebase_same_head success noop same success work same --no-fork-point
+test_rebase_same_head success noop same success work same --keep-base --no-fork-point
test_rebase_same_head success noop same success work same --fork-point master
test_rebase_same_head success noop same success work diff --fork-point --onto B B
test_rebase_same_head success noop same success work diff --fork-point --onto B... B
@@ -91,14 +87,14 @@ test_expect_success 'add work same to side' '
changes='our changes'
test_rebase_same_head success noop same success work same
-test_rebase_same_head success noop same success noop-force same master
-test_rebase_same_head success noop same success noop-force diff --onto B B
-test_rebase_same_head success noop same success noop-force diff --onto B... B
-test_rebase_same_head success noop same success noop-force same --onto master... master
-test_rebase_same_head success noop same success noop-force same --keep-base master
-test_rebase_same_head success noop same success noop-force same --keep-base
-test_rebase_same_head success noop same success noop-force same --no-fork-point
-test_rebase_same_head success noop same success noop-force same --keep-base --no-fork-point
+test_rebase_same_head success noop same success work same master
+test_rebase_same_head success noop same success work diff --onto B B
+test_rebase_same_head success noop same success work diff --onto B... B
+test_rebase_same_head success noop same success work same --onto master... master
+test_rebase_same_head success noop same success work same --keep-base master
+test_rebase_same_head success noop same success work same --keep-base
+test_rebase_same_head success noop same success work same --no-fork-point
+test_rebase_same_head success noop same success work same --keep-base --no-fork-point
test_rebase_same_head success noop same success work same --fork-point master
test_rebase_same_head success noop same success work diff --fork-point --onto B B
test_rebase_same_head success noop same success work diff --fork-point --onto B... B
@@ -112,8 +108,8 @@ test_expect_success 'add work same to upstream' '
'
changes='our and their changes'
-test_rebase_same_head success noop same success noop-force diff --onto B B
-test_rebase_same_head success noop same success noop-force diff --onto B... B
+test_rebase_same_head success noop same success work diff --onto B B
+test_rebase_same_head success noop same success work diff --onto B... B
test_rebase_same_head success noop same success work diff --onto master... master
test_rebase_same_head success noop same success work diff --keep-base master
test_rebase_same_head success noop same success work diff --keep-base
--
gitgitgadget
next prev parent reply other threads:[~2020-02-15 21:36 UTC|newest]
Thread overview: 161+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-20 17:09 [PATCH 00/15] rebase: make the default backend configurable Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 01/15] rebase: extend the options for handling of empty commits Elijah Newren via GitGitGadget
2019-12-20 21:29 ` Junio C Hamano
2019-12-21 0:32 ` Elijah Newren
2019-12-21 18:52 ` Elijah Newren
2019-12-21 23:49 ` Junio C Hamano
2019-12-20 17:09 ` [PATCH 02/15] t3406: simplify an already simple test Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 03/15] rebase, sequencer: remove the broken GIT_QUIET handling Elijah Newren via GitGitGadget
2019-12-20 21:34 ` Junio C Hamano
2019-12-20 17:09 ` [PATCH 04/15] rebase: make sure to pass along the quiet flag to the sequencer Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 05/15] rebase: fix handling of restrict_revision Elijah Newren via GitGitGadget
2019-12-20 21:37 ` Junio C Hamano
2019-12-20 17:09 ` [PATCH 06/15] t3432: make these tests work with either am or merge backends Elijah Newren via GitGitGadget
2019-12-22 5:11 ` Denton Liu
2019-12-23 17:17 ` Elijah Newren
2019-12-20 17:09 ` [PATCH 07/15] rebase: allow more types of rebases to fast-forward Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 08/15] git-rebase.txt: add more details about behavioral differences of backends Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 09/15] rebase: move incompatibility checks between backend options a bit earlier Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 10/15] rebase: add an --am option Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 11/15] contrib: change the prompt for am-based rebases Elijah Newren via GitGitGadget
2019-12-20 23:07 ` SZEDER Gábor
2019-12-21 0:17 ` Elijah Newren
2019-12-20 17:09 ` [PATCH 12/15] rebase tests: mark tests specific to the am-backend with --am Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 13/15] rebase tests: repeat some tests using the merge backend instead of am Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 14/15] rebase: make the backend configurable via config setting Elijah Newren via GitGitGadget
2019-12-20 17:09 ` [PATCH 15/15] rebase: change the default backend from "am" to "merge" Elijah Newren via GitGitGadget
2019-12-20 18:51 ` [PATCH 00/15] rebase: make the default backend configurable Alban Gruin
2019-12-20 18:55 ` Elijah Newren
2019-12-23 18:49 ` [PATCH v2 " Elijah Newren via GitGitGadget
2019-12-23 18:49 ` [PATCH v2 01/15] rebase: extend the options for handling of empty commits Elijah Newren via GitGitGadget
2019-12-23 18:49 ` [PATCH v2 02/15] t3406: simplify an already simple test Elijah Newren via GitGitGadget
2019-12-23 18:49 ` [PATCH v2 03/15] rebase, sequencer: remove the broken GIT_QUIET handling Elijah Newren via GitGitGadget
2019-12-23 18:49 ` [PATCH v2 04/15] rebase: make sure to pass along the quiet flag to the sequencer Elijah Newren via GitGitGadget
2019-12-23 18:49 ` [PATCH v2 05/15] rebase: fix handling of restrict_revision Elijah Newren via GitGitGadget
2019-12-23 18:49 ` [PATCH v2 06/15] t3432: make these tests work with either am or merge backends Elijah Newren via GitGitGadget
2019-12-23 18:49 ` [PATCH v2 07/15] rebase: allow more types of rebases to fast-forward Elijah Newren via GitGitGadget
2019-12-23 18:49 ` [PATCH v2 08/15] git-rebase.txt: add more details about behavioral differences of backends Elijah Newren via GitGitGadget
2019-12-23 18:49 ` [PATCH v2 09/15] rebase: move incompatibility checks between backend options a bit earlier Elijah Newren via GitGitGadget
2019-12-23 18:49 ` [PATCH v2 10/15] rebase: add an --am option Elijah Newren via GitGitGadget
2019-12-23 18:49 ` [PATCH v2 11/15] contrib: change the prompt for interactive-based rebases Elijah Newren via GitGitGadget
2019-12-23 22:00 ` Denton Liu
2019-12-23 18:49 ` [PATCH v2 12/15] rebase tests: mark tests specific to the am-backend with --am Elijah Newren via GitGitGadget
2019-12-23 18:49 ` [PATCH v2 13/15] rebase tests: repeat some tests using the merge backend instead of am Elijah Newren via GitGitGadget
2019-12-23 18:49 ` [PATCH v2 14/15] rebase: make the backend configurable via config setting Elijah Newren via GitGitGadget
2019-12-23 18:49 ` [PATCH v2 15/15] rebase: change the default backend from "am" to "merge" Elijah Newren via GitGitGadget
2019-12-24 19:54 ` [PATCH v3 00/15] rebase: make the default backend configurable Elijah Newren via GitGitGadget
2019-12-24 19:54 ` [PATCH v3 01/15] rebase: extend the options for handling of empty commits Elijah Newren via GitGitGadget
2020-01-07 14:37 ` Phillip Wood
2020-01-07 19:15 ` Elijah Newren
2020-01-08 14:27 ` Phillip Wood
2020-01-09 21:32 ` Johannes Schindelin
2019-12-24 19:54 ` [PATCH v3 02/15] t3406: simplify an already simple test Elijah Newren via GitGitGadget
2019-12-24 19:54 ` [PATCH v3 03/15] rebase, sequencer: remove the broken GIT_QUIET handling Elijah Newren via GitGitGadget
2019-12-24 19:54 ` [PATCH v3 04/15] rebase: make sure to pass along the quiet flag to the sequencer Elijah Newren via GitGitGadget
2019-12-24 19:54 ` [PATCH v3 05/15] rebase: fix handling of restrict_revision Elijah Newren via GitGitGadget
2019-12-24 19:54 ` [PATCH v3 06/15] t3432: make these tests work with either am or merge backends Elijah Newren via GitGitGadget
2019-12-24 19:54 ` [PATCH v3 07/15] rebase: allow more types of rebases to fast-forward Elijah Newren via GitGitGadget
2019-12-24 19:54 ` [PATCH v3 08/15] git-rebase.txt: add more details about behavioral differences of backends Elijah Newren via GitGitGadget
2019-12-24 19:54 ` [PATCH v3 09/15] rebase: move incompatibility checks between backend options a bit earlier Elijah Newren via GitGitGadget
2019-12-24 19:54 ` [PATCH v3 10/15] rebase: add an --am option Elijah Newren via GitGitGadget
2020-01-07 14:43 ` Phillip Wood
2020-01-07 19:26 ` Elijah Newren
2020-01-07 20:11 ` Junio C Hamano
2020-01-08 14:32 ` Phillip Wood
2020-01-08 17:18 ` Junio C Hamano
2020-01-08 18:55 ` Phillip Wood
2019-12-24 19:54 ` [PATCH v3 11/15] git-prompt: change the prompt for interactive-based rebases Elijah Newren via GitGitGadget
2019-12-24 19:54 ` [PATCH v3 12/15] rebase tests: mark tests specific to the am-backend with --am Elijah Newren via GitGitGadget
2019-12-24 19:54 ` [PATCH v3 13/15] rebase tests: repeat some tests using the merge backend instead of am Elijah Newren via GitGitGadget
2019-12-24 19:54 ` [PATCH v3 14/15] rebase: make the backend configurable via config setting Elijah Newren via GitGitGadget
2019-12-24 19:54 ` [PATCH v3 15/15] rebase: change the default backend from "am" to "merge" Elijah Newren via GitGitGadget
2020-01-10 23:14 ` Jonathan Nieder
2020-01-11 1:16 ` Elijah Newren
2020-01-11 14:41 ` Phillip Wood
2020-01-12 17:59 ` Johannes Schindelin
2020-01-16 6:32 ` Elijah Newren
2020-01-16 7:58 ` Jonathan Nieder
2020-01-16 8:06 ` Jonathan Nieder
2020-01-16 16:18 ` Elijah Newren
2020-01-16 20:35 ` Jonathan Nieder
2020-01-16 21:30 ` Elijah Newren
2020-01-16 22:39 ` Jonathan Nieder
2020-01-16 23:19 ` Elijah Newren
2020-01-16 23:25 ` Junio C Hamano
2020-01-17 0:51 ` Elijah Newren
2020-01-16 15:35 ` Elijah Newren
2020-01-16 20:05 ` Junio C Hamano
2020-01-16 10:48 ` Johannes Schindelin
2020-01-12 21:23 ` Junio C Hamano
2020-01-15 19:50 ` Jonathan Nieder
2020-01-15 21:59 ` Emily Shaffer
2020-01-16 6:14 ` [PATCH v4 00/19] rebase: make the default backend configurable Elijah Newren via GitGitGadget
2020-01-16 6:14 ` [PATCH v4 01/19] git-rebase.txt: update description of --allow-empty-message Elijah Newren via GitGitGadget
2020-02-09 15:59 ` Phillip Wood
2020-02-13 18:35 ` Elijah Newren
2020-01-16 6:14 ` [PATCH v4 02/19] t3404: directly test the behavior of interest Elijah Newren via GitGitGadget
2020-01-16 6:14 ` [PATCH v4 03/19] rebase (interactive-backend): make --keep-empty the default Elijah Newren via GitGitGadget
2020-02-09 15:59 ` Phillip Wood
2020-02-13 18:52 ` Elijah Newren
2020-01-16 6:14 ` [PATCH v4 04/19] rebase (interactive-backend): fix handling of commits that become empty Elijah Newren via GitGitGadget
2020-02-10 14:27 ` Phillip Wood
2020-02-13 18:54 ` Elijah Newren
2020-02-16 14:46 ` Phillip Wood
2020-01-16 6:14 ` [PATCH v4 05/19] t3406: simplify an already simple test Elijah Newren via GitGitGadget
2020-01-16 6:14 ` [PATCH v4 06/19] rebase, sequencer: remove the broken GIT_QUIET handling Elijah Newren via GitGitGadget
2020-01-16 6:14 ` [PATCH v4 07/19] rebase: make sure to pass along the quiet flag to the sequencer Elijah Newren via GitGitGadget
2020-01-16 6:14 ` [PATCH v4 08/19] rebase: fix handling of restrict_revision Elijah Newren via GitGitGadget
2020-01-16 6:14 ` [PATCH v4 09/19] t3432: make these tests work with either am or merge backends Elijah Newren via GitGitGadget
2020-01-16 6:14 ` [PATCH v4 10/19] rebase: allow more types of rebases to fast-forward Elijah Newren via GitGitGadget
2020-01-16 6:14 ` [PATCH v4 11/19] git-rebase.txt: add more details about behavioral differences of backends Elijah Newren via GitGitGadget
2020-01-16 6:14 ` [PATCH v4 12/19] rebase: move incompatibility checks between backend options a bit earlier Elijah Newren via GitGitGadget
2020-01-16 6:14 ` [PATCH v4 13/19] rebase: add an --am option Elijah Newren via GitGitGadget
2020-01-16 6:14 ` [PATCH v4 14/19] git-prompt: change the prompt for interactive-based rebases Elijah Newren via GitGitGadget
2020-01-16 6:14 ` [PATCH v4 15/19] rebase: drop '-i' from the reflog " Elijah Newren via GitGitGadget
2020-01-16 6:14 ` [PATCH v4 16/19] rebase tests: mark tests specific to the am-backend with --am Elijah Newren via GitGitGadget
2020-01-16 6:14 ` [PATCH v4 17/19] rebase tests: repeat some tests using the merge backend instead of am Elijah Newren via GitGitGadget
2020-01-16 6:14 ` [PATCH v4 18/19] rebase: make the backend configurable via config setting Elijah Newren via GitGitGadget
2020-01-16 6:14 ` [PATCH v4 19/19] rebase: change the default backend from "am" to "merge" Elijah Newren via GitGitGadget
2020-01-17 16:58 ` [PATCH v4 00/19] rebase: make the default backend configurable Phillip Wood
2020-02-05 21:06 ` Junio C Hamano
2020-02-05 22:38 ` Elijah Newren
2020-02-15 21:36 ` [PATCH v5 00/20] rebase: make the default backend configurable and change the default Elijah Newren via GitGitGadget
2020-02-15 21:36 ` [PATCH v5 01/20] git-rebase.txt: update description of --allow-empty-message Elijah Newren via GitGitGadget
2020-02-15 21:36 ` [PATCH v5 02/20] t3404: directly test the behavior of interest Elijah Newren via GitGitGadget
2020-02-15 21:36 ` [PATCH v5 03/20] rebase (interactive-backend): make --keep-empty the default Elijah Newren via GitGitGadget
2020-02-15 21:36 ` [PATCH v5 04/20] rebase (interactive-backend): fix handling of commits that become empty Elijah Newren via GitGitGadget
2020-02-15 21:36 ` [PATCH v5 05/20] t3406: simplify an already simple test Elijah Newren via GitGitGadget
2020-02-15 21:36 ` [PATCH v5 06/20] rebase, sequencer: remove the broken GIT_QUIET handling Elijah Newren via GitGitGadget
2020-02-15 21:36 ` [PATCH v5 07/20] rebase: make sure to pass along the quiet flag to the sequencer Elijah Newren via GitGitGadget
2020-02-15 21:36 ` [PATCH v5 08/20] rebase: fix handling of restrict_revision Elijah Newren via GitGitGadget
2020-02-15 21:36 ` Elijah Newren via GitGitGadget [this message]
2020-02-15 21:36 ` [PATCH v5 10/20] rebase: allow more types of rebases to fast-forward Elijah Newren via GitGitGadget
2020-02-15 21:36 ` [PATCH v5 11/20] git-rebase.txt: add more details about behavioral differences of backends Elijah Newren via GitGitGadget
2020-02-15 21:36 ` [PATCH v5 12/20] rebase: move incompatibility checks between backend options a bit earlier Elijah Newren via GitGitGadget
2020-02-15 21:36 ` [PATCH v5 13/20] rebase: add an --am option Elijah Newren via GitGitGadget
2020-02-15 21:36 ` [PATCH v5 14/20] git-prompt: change the prompt for interactive-based rebases Elijah Newren via GitGitGadget
2020-02-15 21:36 ` [PATCH v5 15/20] rebase: drop '-i' from the reflog " Elijah Newren via GitGitGadget
2020-02-15 21:36 ` [PATCH v5 16/20] rebase tests: mark tests specific to the am-backend with --am Elijah Newren via GitGitGadget
2020-02-15 21:36 ` [PATCH v5 17/20] rebase tests: repeat some tests using the merge backend instead of am Elijah Newren via GitGitGadget
2020-02-15 21:36 ` [PATCH v5 18/20] rebase: make the backend configurable via config setting Elijah Newren via GitGitGadget
2020-02-15 21:36 ` [PATCH v5 19/20] rebase: change the default backend from "am" to "merge" Elijah Newren via GitGitGadget
2020-02-15 21:36 ` [PATCH v5 20/20] rebase: rename the two primary rebase backends Elijah Newren via GitGitGadget
2020-03-12 15:13 ` Emily Shaffer
2020-03-12 16:33 ` Elijah Newren
2020-03-12 17:55 ` Jonathan Nieder
2020-03-12 18:39 ` Elijah Newren
2020-03-12 18:46 ` Jonathan Nieder
2020-03-12 19:31 ` Elijah Newren
2020-03-17 2:58 ` Jonathan Nieder
2020-03-17 4:45 ` Elijah Newren
2020-03-12 19:54 ` Junio C Hamano
2020-03-12 19:07 ` Junio C Hamano
2020-03-12 19:12 ` Jonathan Nieder
2020-03-12 19:12 ` Junio C Hamano
2020-03-12 19:29 ` Elijah Newren
2020-03-12 20:37 ` Jeff King
2020-03-12 21:27 ` Junio C Hamano
2020-03-12 22:06 ` Elijah Newren
2020-03-13 0:04 ` Junio C Hamano
2020-03-12 23:30 ` Jonathan Nieder
2020-02-16 15:01 ` [PATCH v5 00/20] rebase: make the default backend configurable and change the default Phillip Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bcd04ec4ded1858a6e1d2292bbc0d34ec28c2f57.1581802602.git.gitgitgadget@gmail.com \
--to=gitgitgadget@gmail.com \
--cc=Johannes.Schindelin@gmx.de \
--cc=alban.gruin@gmail.com \
--cc=emilyshaffer@google.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=jrnieder@gmail.com \
--cc=liu.denton@gmail.com \
--cc=newren@gmail.com \
--cc=phillip.wood@dunelm.org.uk \
--cc=plroskin@gmail.com \
--cc=szeder.dev@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.