* [PATCH bpf-next 00/10] bpf/tests: Extend eBPF JIT test suite
@ 2021-10-01 13:03 Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 01/10] bpf/tests: Add tests of BPF_LDX and BPF_STX with small sizes Johan Almbladh
` (10 more replies)
0 siblings, 11 replies; 12+ messages in thread
From: Johan Almbladh @ 2021-10-01 13:03 UTC (permalink / raw)
To: ast, daniel, andrii
Cc: kafai, songliubraving, yhs, john.fastabend, kpsingh, iii, paul,
yangtiezhu, netdev, bpf, Johan Almbladh
This patch set adds a number of new tests to the test_bpf.ko test suite.
The new tests focus on the behaviour of operations with different
combinations of register operands, and in particular, when two or more
register operands are in fact the same register. It also verifies things
like a src register not being zero-extended in-place in ALU32 operations,
and that operations implemented with function calls do not clobber any
other eBPF registers.
Johan Almbladh (10):
bpf/tests: Add tests of BPF_LDX and BPF_STX with small sizes
bpf/tests: Add zero-extension checks in BPF_ATOMIC tests
bpf/tests: Add exhaustive tests of BPF_ATOMIC magnitudes
bpf/tests: Add tests to check source register zero-extension
bpf/tests: Add more tests for ALU and ATOMIC register clobbering
bpf/tests: Minor restructuring of ALU tests
bpf/tests: Add exhaustive tests of ALU register combinations
bpf/tests: Add exhaustive tests of BPF_ATOMIC register combinations
bpf/tests: Add test of ALU shifts with operand register aliasing
bpf/tests: Add test of LDX_MEM with operand aliasing
lib/test_bpf.c | 2803 ++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 2571 insertions(+), 232 deletions(-)
--
2.30.2
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH bpf-next 01/10] bpf/tests: Add tests of BPF_LDX and BPF_STX with small sizes
2021-10-01 13:03 [PATCH bpf-next 00/10] bpf/tests: Extend eBPF JIT test suite Johan Almbladh
@ 2021-10-01 13:03 ` Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 02/10] bpf/tests: Add zero-extension checks in BPF_ATOMIC tests Johan Almbladh
` (9 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Johan Almbladh @ 2021-10-01 13:03 UTC (permalink / raw)
To: ast, daniel, andrii
Cc: kafai, songliubraving, yhs, john.fastabend, kpsingh, iii, paul,
yangtiezhu, netdev, bpf, Johan Almbladh
This patch adds a series of tests to verify the behavior of BPF_LDX and
BPF_STX with BPF_B//W sizes in isolation. In particular, it checks that
BPF_LDX zero-extendeds the result, and that BPF_STX does not overwrite
adjacent bytes in memory.
BPF_ST and operations on BPF_DW size are deemed to be sufficiently
tested by existing tests.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
---
lib/test_bpf.c | 254 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 254 insertions(+)
diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index 21ea1ab253a1..a838a6179ca4 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -6907,6 +6907,260 @@ static struct bpf_test tests[] = {
{ },
{ { 0, (u32) (cpu_to_le64(0xfedcba9876543210ULL) >> 32) } },
},
+ /* BPF_LDX_MEM B/H/W/DW */
+ {
+ "BPF_LDX_MEM | BPF_B",
+ .u.insns_int = {
+ BPF_LD_IMM64(R1, 0x0102030405060708ULL),
+ BPF_LD_IMM64(R2, 0x0000000000000008ULL),
+ BPF_STX_MEM(BPF_DW, R10, R1, -8),
+#ifdef __BIG_ENDIAN
+ BPF_LDX_MEM(BPF_B, R0, R10, -1),
+#else
+ BPF_LDX_MEM(BPF_B, R0, R10, -8),
+#endif
+ BPF_JMP_REG(BPF_JNE, R0, R2, 1),
+ BPF_ALU64_IMM(BPF_MOV, R0, 0),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 0 } },
+ .stack_depth = 8,
+ },
+ {
+ "BPF_LDX_MEM | BPF_B, MSB set",
+ .u.insns_int = {
+ BPF_LD_IMM64(R1, 0x8182838485868788ULL),
+ BPF_LD_IMM64(R2, 0x0000000000000088ULL),
+ BPF_STX_MEM(BPF_DW, R10, R1, -8),
+#ifdef __BIG_ENDIAN
+ BPF_LDX_MEM(BPF_B, R0, R10, -1),
+#else
+ BPF_LDX_MEM(BPF_B, R0, R10, -8),
+#endif
+ BPF_JMP_REG(BPF_JNE, R0, R2, 1),
+ BPF_ALU64_IMM(BPF_MOV, R0, 0),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 0 } },
+ .stack_depth = 8,
+ },
+ {
+ "BPF_LDX_MEM | BPF_H",
+ .u.insns_int = {
+ BPF_LD_IMM64(R1, 0x0102030405060708ULL),
+ BPF_LD_IMM64(R2, 0x0000000000000708ULL),
+ BPF_STX_MEM(BPF_DW, R10, R1, -8),
+#ifdef __BIG_ENDIAN
+ BPF_LDX_MEM(BPF_H, R0, R10, -2),
+#else
+ BPF_LDX_MEM(BPF_H, R0, R10, -8),
+#endif
+ BPF_JMP_REG(BPF_JNE, R0, R2, 1),
+ BPF_ALU64_IMM(BPF_MOV, R0, 0),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 0 } },
+ .stack_depth = 8,
+ },
+ {
+ "BPF_LDX_MEM | BPF_H, MSB set",
+ .u.insns_int = {
+ BPF_LD_IMM64(R1, 0x8182838485868788ULL),
+ BPF_LD_IMM64(R2, 0x0000000000008788ULL),
+ BPF_STX_MEM(BPF_DW, R10, R1, -8),
+#ifdef __BIG_ENDIAN
+ BPF_LDX_MEM(BPF_H, R0, R10, -2),
+#else
+ BPF_LDX_MEM(BPF_H, R0, R10, -8),
+#endif
+ BPF_JMP_REG(BPF_JNE, R0, R2, 1),
+ BPF_ALU64_IMM(BPF_MOV, R0, 0),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 0 } },
+ .stack_depth = 8,
+ },
+ {
+ "BPF_LDX_MEM | BPF_W",
+ .u.insns_int = {
+ BPF_LD_IMM64(R1, 0x0102030405060708ULL),
+ BPF_LD_IMM64(R2, 0x0000000005060708ULL),
+ BPF_STX_MEM(BPF_DW, R10, R1, -8),
+#ifdef __BIG_ENDIAN
+ BPF_LDX_MEM(BPF_W, R0, R10, -4),
+#else
+ BPF_LDX_MEM(BPF_W, R0, R10, -8),
+#endif
+ BPF_JMP_REG(BPF_JNE, R0, R2, 1),
+ BPF_ALU64_IMM(BPF_MOV, R0, 0),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 0 } },
+ .stack_depth = 8,
+ },
+ {
+ "BPF_LDX_MEM | BPF_W, MSB set",
+ .u.insns_int = {
+ BPF_LD_IMM64(R1, 0x8182838485868788ULL),
+ BPF_LD_IMM64(R2, 0x0000000085868788ULL),
+ BPF_STX_MEM(BPF_DW, R10, R1, -8),
+#ifdef __BIG_ENDIAN
+ BPF_LDX_MEM(BPF_W, R0, R10, -4),
+#else
+ BPF_LDX_MEM(BPF_W, R0, R10, -8),
+#endif
+ BPF_JMP_REG(BPF_JNE, R0, R2, 1),
+ BPF_ALU64_IMM(BPF_MOV, R0, 0),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 0 } },
+ .stack_depth = 8,
+ },
+ /* BPF_STX_MEM B/H/W/DW */
+ {
+ "BPF_STX_MEM | BPF_B",
+ .u.insns_int = {
+ BPF_LD_IMM64(R1, 0x8090a0b0c0d0e0f0ULL),
+ BPF_LD_IMM64(R2, 0x0102030405060708ULL),
+ BPF_LD_IMM64(R3, 0x8090a0b0c0d0e008ULL),
+ BPF_STX_MEM(BPF_DW, R10, R1, -8),
+#ifdef __BIG_ENDIAN
+ BPF_STX_MEM(BPF_B, R10, R2, -1),
+#else
+ BPF_STX_MEM(BPF_B, R10, R2, -8),
+#endif
+ BPF_LDX_MEM(BPF_DW, R0, R10, -8),
+ BPF_JMP_REG(BPF_JNE, R0, R3, 1),
+ BPF_ALU64_IMM(BPF_MOV, R0, 0),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 0 } },
+ .stack_depth = 8,
+ },
+ {
+ "BPF_STX_MEM | BPF_B, MSB set",
+ .u.insns_int = {
+ BPF_LD_IMM64(R1, 0x8090a0b0c0d0e0f0ULL),
+ BPF_LD_IMM64(R2, 0x8182838485868788ULL),
+ BPF_LD_IMM64(R3, 0x8090a0b0c0d0e088ULL),
+ BPF_STX_MEM(BPF_DW, R10, R1, -8),
+#ifdef __BIG_ENDIAN
+ BPF_STX_MEM(BPF_B, R10, R2, -1),
+#else
+ BPF_STX_MEM(BPF_B, R10, R2, -8),
+#endif
+ BPF_LDX_MEM(BPF_DW, R0, R10, -8),
+ BPF_JMP_REG(BPF_JNE, R0, R3, 1),
+ BPF_ALU64_IMM(BPF_MOV, R0, 0),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 0 } },
+ .stack_depth = 8,
+ },
+ {
+ "BPF_STX_MEM | BPF_H",
+ .u.insns_int = {
+ BPF_LD_IMM64(R1, 0x8090a0b0c0d0e0f0ULL),
+ BPF_LD_IMM64(R2, 0x0102030405060708ULL),
+ BPF_LD_IMM64(R3, 0x8090a0b0c0d00708ULL),
+ BPF_STX_MEM(BPF_DW, R10, R1, -8),
+#ifdef __BIG_ENDIAN
+ BPF_STX_MEM(BPF_H, R10, R2, -2),
+#else
+ BPF_STX_MEM(BPF_H, R10, R2, -8),
+#endif
+ BPF_LDX_MEM(BPF_DW, R0, R10, -8),
+ BPF_JMP_REG(BPF_JNE, R0, R3, 1),
+ BPF_ALU64_IMM(BPF_MOV, R0, 0),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 0 } },
+ .stack_depth = 8,
+ },
+ {
+ "BPF_STX_MEM | BPF_H, MSB set",
+ .u.insns_int = {
+ BPF_LD_IMM64(R1, 0x8090a0b0c0d0e0f0ULL),
+ BPF_LD_IMM64(R2, 0x8182838485868788ULL),
+ BPF_LD_IMM64(R3, 0x8090a0b0c0d08788ULL),
+ BPF_STX_MEM(BPF_DW, R10, R1, -8),
+#ifdef __BIG_ENDIAN
+ BPF_STX_MEM(BPF_H, R10, R2, -2),
+#else
+ BPF_STX_MEM(BPF_H, R10, R2, -8),
+#endif
+ BPF_LDX_MEM(BPF_DW, R0, R10, -8),
+ BPF_JMP_REG(BPF_JNE, R0, R3, 1),
+ BPF_ALU64_IMM(BPF_MOV, R0, 0),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 0 } },
+ .stack_depth = 8,
+ },
+ {
+ "BPF_STX_MEM | BPF_W",
+ .u.insns_int = {
+ BPF_LD_IMM64(R1, 0x8090a0b0c0d0e0f0ULL),
+ BPF_LD_IMM64(R2, 0x0102030405060708ULL),
+ BPF_LD_IMM64(R3, 0x8090a0b005060708ULL),
+ BPF_STX_MEM(BPF_DW, R10, R1, -8),
+#ifdef __BIG_ENDIAN
+ BPF_STX_MEM(BPF_W, R10, R2, -4),
+#else
+ BPF_STX_MEM(BPF_W, R10, R2, -8),
+#endif
+ BPF_LDX_MEM(BPF_DW, R0, R10, -8),
+ BPF_JMP_REG(BPF_JNE, R0, R3, 1),
+ BPF_ALU64_IMM(BPF_MOV, R0, 0),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 0 } },
+ .stack_depth = 8,
+ },
+ {
+ "BPF_STX_MEM | BPF_W, MSB set",
+ .u.insns_int = {
+ BPF_LD_IMM64(R1, 0x8090a0b0c0d0e0f0ULL),
+ BPF_LD_IMM64(R2, 0x8182838485868788ULL),
+ BPF_LD_IMM64(R3, 0x8090a0b085868788ULL),
+ BPF_STX_MEM(BPF_DW, R10, R1, -8),
+#ifdef __BIG_ENDIAN
+ BPF_STX_MEM(BPF_W, R10, R2, -4),
+#else
+ BPF_STX_MEM(BPF_W, R10, R2, -8),
+#endif
+ BPF_LDX_MEM(BPF_DW, R0, R10, -8),
+ BPF_JMP_REG(BPF_JNE, R0, R3, 1),
+ BPF_ALU64_IMM(BPF_MOV, R0, 0),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 0 } },
+ .stack_depth = 8,
+ },
/* BPF_ST(X) | BPF_MEM | BPF_B/H/W/DW */
{
"ST_MEM_B: Store/Load byte: max negative",
--
2.30.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH bpf-next 02/10] bpf/tests: Add zero-extension checks in BPF_ATOMIC tests
2021-10-01 13:03 [PATCH bpf-next 00/10] bpf/tests: Extend eBPF JIT test suite Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 01/10] bpf/tests: Add tests of BPF_LDX and BPF_STX with small sizes Johan Almbladh
@ 2021-10-01 13:03 ` Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 03/10] bpf/tests: Add exhaustive tests of BPF_ATOMIC magnitudes Johan Almbladh
` (8 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Johan Almbladh @ 2021-10-01 13:03 UTC (permalink / raw)
To: ast, daniel, andrii
Cc: kafai, songliubraving, yhs, john.fastabend, kpsingh, iii, paul,
yangtiezhu, netdev, bpf, Johan Almbladh
This patch updates the existing tests of BPF_ATOMIC operations to verify
that a 32-bit register operand is properly zero-extended. In particular,
it checks the operation on archs that require 32-bit operands to be
properly zero-/sign-extended or the result is undefined, e.g. MIPS64.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
---
lib/test_bpf.c | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index a838a6179ca4..f6983ad7b981 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -7398,15 +7398,20 @@ static struct bpf_test tests[] = {
* Individual tests are expanded from template macros for all
* combinations of ALU operation, word size and fetching.
*/
+#define BPF_ATOMIC_POISON(width) ((width) == BPF_W ? (0xbaadf00dULL << 32) : 0)
+
#define BPF_ATOMIC_OP_TEST1(width, op, logic, old, update, result) \
{ \
"BPF_ATOMIC | " #width ", " #op ": Test: " \
#old " " #logic " " #update " = " #result, \
.u.insns_int = { \
- BPF_ALU32_IMM(BPF_MOV, R5, update), \
+ BPF_LD_IMM64(R5, (update) | BPF_ATOMIC_POISON(width)), \
BPF_ST_MEM(width, R10, -40, old), \
BPF_ATOMIC_OP(width, op, R10, R5, -40), \
BPF_LDX_MEM(width, R0, R10, -40), \
+ BPF_ALU64_REG(BPF_MOV, R1, R0), \
+ BPF_ALU64_IMM(BPF_RSH, R1, 32), \
+ BPF_ALU64_REG(BPF_OR, R0, R1), \
BPF_EXIT_INSN(), \
}, \
INTERNAL, \
@@ -7420,11 +7425,14 @@ static struct bpf_test tests[] = {
#old " " #logic " " #update " = " #result, \
.u.insns_int = { \
BPF_ALU64_REG(BPF_MOV, R1, R10), \
- BPF_ALU32_IMM(BPF_MOV, R0, update), \
+ BPF_LD_IMM64(R0, (update) | BPF_ATOMIC_POISON(width)), \
BPF_ST_MEM(BPF_W, R10, -40, old), \
BPF_ATOMIC_OP(width, op, R10, R0, -40), \
BPF_ALU64_REG(BPF_MOV, R0, R10), \
BPF_ALU64_REG(BPF_SUB, R0, R1), \
+ BPF_ALU64_REG(BPF_MOV, R1, R0), \
+ BPF_ALU64_IMM(BPF_RSH, R1, 32), \
+ BPF_ALU64_REG(BPF_OR, R0, R1), \
BPF_EXIT_INSN(), \
}, \
INTERNAL, \
@@ -7438,10 +7446,13 @@ static struct bpf_test tests[] = {
#old " " #logic " " #update " = " #result, \
.u.insns_int = { \
BPF_ALU64_REG(BPF_MOV, R0, R10), \
- BPF_ALU32_IMM(BPF_MOV, R1, update), \
+ BPF_LD_IMM64(R1, (update) | BPF_ATOMIC_POISON(width)), \
BPF_ST_MEM(width, R10, -40, old), \
BPF_ATOMIC_OP(width, op, R10, R1, -40), \
BPF_ALU64_REG(BPF_SUB, R0, R10), \
+ BPF_ALU64_REG(BPF_MOV, R1, R0), \
+ BPF_ALU64_IMM(BPF_RSH, R1, 32), \
+ BPF_ALU64_REG(BPF_OR, R0, R1), \
BPF_EXIT_INSN(), \
}, \
INTERNAL, \
@@ -7454,10 +7465,10 @@ static struct bpf_test tests[] = {
"BPF_ATOMIC | " #width ", " #op ": Test fetch: " \
#old " " #logic " " #update " = " #result, \
.u.insns_int = { \
- BPF_ALU32_IMM(BPF_MOV, R3, update), \
+ BPF_LD_IMM64(R3, (update) | BPF_ATOMIC_POISON(width)), \
BPF_ST_MEM(width, R10, -40, old), \
BPF_ATOMIC_OP(width, op, R10, R3, -40), \
- BPF_ALU64_REG(BPF_MOV, R0, R3), \
+ BPF_ALU32_REG(BPF_MOV, R0, R3), \
BPF_EXIT_INSN(), \
}, \
INTERNAL, \
@@ -7555,6 +7566,7 @@ static struct bpf_test tests[] = {
BPF_ATOMIC_OP_TEST2(BPF_DW, BPF_XCHG, xchg, 0x12, 0xab, 0xab),
BPF_ATOMIC_OP_TEST3(BPF_DW, BPF_XCHG, xchg, 0x12, 0xab, 0xab),
BPF_ATOMIC_OP_TEST4(BPF_DW, BPF_XCHG, xchg, 0x12, 0xab, 0xab),
+#undef BPF_ATOMIC_POISON
#undef BPF_ATOMIC_OP_TEST1
#undef BPF_ATOMIC_OP_TEST2
#undef BPF_ATOMIC_OP_TEST3
--
2.30.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH bpf-next 03/10] bpf/tests: Add exhaustive tests of BPF_ATOMIC magnitudes
2021-10-01 13:03 [PATCH bpf-next 00/10] bpf/tests: Extend eBPF JIT test suite Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 01/10] bpf/tests: Add tests of BPF_LDX and BPF_STX with small sizes Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 02/10] bpf/tests: Add zero-extension checks in BPF_ATOMIC tests Johan Almbladh
@ 2021-10-01 13:03 ` Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 04/10] bpf/tests: Add tests to check source register zero-extension Johan Almbladh
` (7 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Johan Almbladh @ 2021-10-01 13:03 UTC (permalink / raw)
To: ast, daniel, andrii
Cc: kafai, songliubraving, yhs, john.fastabend, kpsingh, iii, paul,
yangtiezhu, netdev, bpf, Johan Almbladh
This patch adds a series of test to verify the operation of BPF_ATOMIC
with BPF_DW and BPF_W sizes, for all power-of-two magnitudes of the
register value operand.
Also fixes a confusing typo in the comment for a related test.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
---
lib/test_bpf.c | 504 ++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 503 insertions(+), 1 deletion(-)
diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index f6983ad7b981..84efb23e09d0 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -796,7 +796,7 @@ static int __bpf_fill_pattern(struct bpf_test *self, void *arg,
/*
* Exhaustive tests of ALU operations for all combinations of power-of-two
* magnitudes of the operands, both for positive and negative values. The
- * test is designed to verify e.g. the JMP and JMP32 operations for JITs that
+ * test is designed to verify e.g. the ALU and ALU64 operations for JITs that
* emit different code depending on the magnitude of the immediate value.
*/
@@ -1137,6 +1137,306 @@ static int bpf_fill_alu32_mod_reg(struct bpf_test *self)
return __bpf_fill_alu32_reg(self, BPF_MOD);
}
+/*
+ * Exhaustive tests of atomic operations for all power-of-two operand
+ * magnitudes, both for positive and negative values.
+ */
+
+static int __bpf_emit_atomic64(struct bpf_test *self, void *arg,
+ struct bpf_insn *insns, s64 dst, s64 src)
+{
+ int op = *(int *)arg;
+ u64 keep, fetch, res;
+ int i = 0;
+
+ if (!insns)
+ return 21;
+
+ switch (op) {
+ case BPF_XCHG:
+ res = src;
+ break;
+ default:
+ __bpf_alu_result(&res, dst, src, BPF_OP(op));
+ }
+
+ keep = 0x0123456789abcdefULL;
+ if (op & BPF_FETCH)
+ fetch = dst;
+ else
+ fetch = src;
+
+ i += __bpf_ld_imm64(&insns[i], R0, keep);
+ i += __bpf_ld_imm64(&insns[i], R1, dst);
+ i += __bpf_ld_imm64(&insns[i], R2, src);
+ i += __bpf_ld_imm64(&insns[i], R3, res);
+ i += __bpf_ld_imm64(&insns[i], R4, fetch);
+ i += __bpf_ld_imm64(&insns[i], R5, keep);
+
+ insns[i++] = BPF_STX_MEM(BPF_DW, R10, R1, -8);
+ insns[i++] = BPF_ATOMIC_OP(BPF_DW, op, R10, R2, -8);
+ insns[i++] = BPF_LDX_MEM(BPF_DW, R1, R10, -8);
+
+ insns[i++] = BPF_JMP_REG(BPF_JEQ, R1, R3, 1);
+ insns[i++] = BPF_EXIT_INSN();
+
+ insns[i++] = BPF_JMP_REG(BPF_JEQ, R2, R4, 1);
+ insns[i++] = BPF_EXIT_INSN();
+
+ insns[i++] = BPF_JMP_REG(BPF_JEQ, R0, R5, 1);
+ insns[i++] = BPF_EXIT_INSN();
+
+ return i;
+}
+
+static int __bpf_emit_atomic32(struct bpf_test *self, void *arg,
+ struct bpf_insn *insns, s64 dst, s64 src)
+{
+ int op = *(int *)arg;
+ u64 keep, fetch, res;
+ int i = 0;
+
+ if (!insns)
+ return 21;
+
+ switch (op) {
+ case BPF_XCHG:
+ res = src;
+ break;
+ default:
+ __bpf_alu_result(&res, (u32)dst, (u32)src, BPF_OP(op));
+ }
+
+ keep = 0x0123456789abcdefULL;
+ if (op & BPF_FETCH)
+ fetch = (u32)dst;
+ else
+ fetch = src;
+
+ i += __bpf_ld_imm64(&insns[i], R0, keep);
+ i += __bpf_ld_imm64(&insns[i], R1, (u32)dst);
+ i += __bpf_ld_imm64(&insns[i], R2, src);
+ i += __bpf_ld_imm64(&insns[i], R3, (u32)res);
+ i += __bpf_ld_imm64(&insns[i], R4, fetch);
+ i += __bpf_ld_imm64(&insns[i], R5, keep);
+
+ insns[i++] = BPF_STX_MEM(BPF_W, R10, R1, -4);
+ insns[i++] = BPF_ATOMIC_OP(BPF_W, op, R10, R2, -4);
+ insns[i++] = BPF_LDX_MEM(BPF_W, R1, R10, -4);
+
+ insns[i++] = BPF_JMP_REG(BPF_JEQ, R1, R3, 1);
+ insns[i++] = BPF_EXIT_INSN();
+
+ insns[i++] = BPF_JMP_REG(BPF_JEQ, R2, R4, 1);
+ insns[i++] = BPF_EXIT_INSN();
+
+ insns[i++] = BPF_JMP_REG(BPF_JEQ, R0, R5, 1);
+ insns[i++] = BPF_EXIT_INSN();
+
+ return i;
+}
+
+static int __bpf_emit_cmpxchg64(struct bpf_test *self, void *arg,
+ struct bpf_insn *insns, s64 dst, s64 src)
+{
+ int i = 0;
+
+ if (!insns)
+ return 23;
+
+ i += __bpf_ld_imm64(&insns[i], R0, ~dst);
+ i += __bpf_ld_imm64(&insns[i], R1, dst);
+ i += __bpf_ld_imm64(&insns[i], R2, src);
+
+ /* Result unsuccessful */
+ insns[i++] = BPF_STX_MEM(BPF_DW, R10, R1, -8);
+ insns[i++] = BPF_ATOMIC_OP(BPF_DW, BPF_CMPXCHG, R10, R2, -8);
+ insns[i++] = BPF_LDX_MEM(BPF_DW, R3, R10, -8);
+
+ insns[i++] = BPF_JMP_REG(BPF_JEQ, R1, R3, 2);
+ insns[i++] = BPF_MOV64_IMM(R0, __LINE__);
+ insns[i++] = BPF_EXIT_INSN();
+
+ insns[i++] = BPF_JMP_REG(BPF_JEQ, R0, R3, 2);
+ insns[i++] = BPF_MOV64_IMM(R0, __LINE__);
+ insns[i++] = BPF_EXIT_INSN();
+
+ /* Result successful */
+ insns[i++] = BPF_ATOMIC_OP(BPF_DW, BPF_CMPXCHG, R10, R2, -8);
+ insns[i++] = BPF_LDX_MEM(BPF_DW, R3, R10, -8);
+
+ insns[i++] = BPF_JMP_REG(BPF_JEQ, R2, R3, 2);
+ insns[i++] = BPF_MOV64_IMM(R0, __LINE__);
+ insns[i++] = BPF_EXIT_INSN();
+
+ insns[i++] = BPF_JMP_REG(BPF_JEQ, R0, R1, 2);
+ insns[i++] = BPF_MOV64_IMM(R0, __LINE__);
+ insns[i++] = BPF_EXIT_INSN();
+
+ return i;
+}
+
+static int __bpf_emit_cmpxchg32(struct bpf_test *self, void *arg,
+ struct bpf_insn *insns, s64 dst, s64 src)
+{
+ int i = 0;
+
+ if (!insns)
+ return 27;
+
+ i += __bpf_ld_imm64(&insns[i], R0, ~dst);
+ i += __bpf_ld_imm64(&insns[i], R1, (u32)dst);
+ i += __bpf_ld_imm64(&insns[i], R2, src);
+
+ /* Result unsuccessful */
+ insns[i++] = BPF_STX_MEM(BPF_W, R10, R1, -4);
+ insns[i++] = BPF_ATOMIC_OP(BPF_W, BPF_CMPXCHG, R10, R2, -4);
+ insns[i++] = BPF_ZEXT_REG(R0), /* Zext always inserted by verifier */
+ insns[i++] = BPF_LDX_MEM(BPF_W, R3, R10, -4);
+
+ insns[i++] = BPF_JMP32_REG(BPF_JEQ, R1, R3, 2);
+ insns[i++] = BPF_MOV32_IMM(R0, __LINE__);
+ insns[i++] = BPF_EXIT_INSN();
+
+ insns[i++] = BPF_JMP_REG(BPF_JEQ, R0, R3, 2);
+ insns[i++] = BPF_MOV32_IMM(R0, __LINE__);
+ insns[i++] = BPF_EXIT_INSN();
+
+ /* Result successful */
+ i += __bpf_ld_imm64(&insns[i], R0, dst);
+ insns[i++] = BPF_ATOMIC_OP(BPF_W, BPF_CMPXCHG, R10, R2, -4);
+ insns[i++] = BPF_ZEXT_REG(R0), /* Zext always inserted by verifier */
+ insns[i++] = BPF_LDX_MEM(BPF_W, R3, R10, -4);
+
+ insns[i++] = BPF_JMP32_REG(BPF_JEQ, R2, R3, 2);
+ insns[i++] = BPF_MOV32_IMM(R0, __LINE__);
+ insns[i++] = BPF_EXIT_INSN();
+
+ insns[i++] = BPF_JMP_REG(BPF_JEQ, R0, R1, 2);
+ insns[i++] = BPF_MOV32_IMM(R0, __LINE__);
+ insns[i++] = BPF_EXIT_INSN();
+
+ return i;
+}
+
+static int __bpf_fill_atomic64(struct bpf_test *self, int op)
+{
+ return __bpf_fill_pattern(self, &op, 64, 64,
+ 0, PATTERN_BLOCK2,
+ &__bpf_emit_atomic64);
+}
+
+static int __bpf_fill_atomic32(struct bpf_test *self, int op)
+{
+ return __bpf_fill_pattern(self, &op, 64, 64,
+ 0, PATTERN_BLOCK2,
+ &__bpf_emit_atomic32);
+}
+
+/* 64-bit atomic operations */
+static int bpf_fill_atomic64_add(struct bpf_test *self)
+{
+ return __bpf_fill_atomic64(self, BPF_ADD);
+}
+
+static int bpf_fill_atomic64_and(struct bpf_test *self)
+{
+ return __bpf_fill_atomic64(self, BPF_AND);
+}
+
+static int bpf_fill_atomic64_or(struct bpf_test *self)
+{
+ return __bpf_fill_atomic64(self, BPF_OR);
+}
+
+static int bpf_fill_atomic64_xor(struct bpf_test *self)
+{
+ return __bpf_fill_atomic64(self, BPF_XOR);
+}
+
+static int bpf_fill_atomic64_add_fetch(struct bpf_test *self)
+{
+ return __bpf_fill_atomic64(self, BPF_ADD | BPF_FETCH);
+}
+
+static int bpf_fill_atomic64_and_fetch(struct bpf_test *self)
+{
+ return __bpf_fill_atomic64(self, BPF_AND | BPF_FETCH);
+}
+
+static int bpf_fill_atomic64_or_fetch(struct bpf_test *self)
+{
+ return __bpf_fill_atomic64(self, BPF_OR | BPF_FETCH);
+}
+
+static int bpf_fill_atomic64_xor_fetch(struct bpf_test *self)
+{
+ return __bpf_fill_atomic64(self, BPF_XOR | BPF_FETCH);
+}
+
+static int bpf_fill_atomic64_xchg(struct bpf_test *self)
+{
+ return __bpf_fill_atomic64(self, BPF_XCHG);
+}
+
+static int bpf_fill_cmpxchg64(struct bpf_test *self)
+{
+ return __bpf_fill_pattern(self, NULL, 64, 64, 0, PATTERN_BLOCK2,
+ &__bpf_emit_cmpxchg64);
+}
+
+/* 32-bit atomic operations */
+static int bpf_fill_atomic32_add(struct bpf_test *self)
+{
+ return __bpf_fill_atomic32(self, BPF_ADD);
+}
+
+static int bpf_fill_atomic32_and(struct bpf_test *self)
+{
+ return __bpf_fill_atomic32(self, BPF_AND);
+}
+
+static int bpf_fill_atomic32_or(struct bpf_test *self)
+{
+ return __bpf_fill_atomic32(self, BPF_OR);
+}
+
+static int bpf_fill_atomic32_xor(struct bpf_test *self)
+{
+ return __bpf_fill_atomic32(self, BPF_XOR);
+}
+
+static int bpf_fill_atomic32_add_fetch(struct bpf_test *self)
+{
+ return __bpf_fill_atomic32(self, BPF_ADD | BPF_FETCH);
+}
+
+static int bpf_fill_atomic32_and_fetch(struct bpf_test *self)
+{
+ return __bpf_fill_atomic32(self, BPF_AND | BPF_FETCH);
+}
+
+static int bpf_fill_atomic32_or_fetch(struct bpf_test *self)
+{
+ return __bpf_fill_atomic32(self, BPF_OR | BPF_FETCH);
+}
+
+static int bpf_fill_atomic32_xor_fetch(struct bpf_test *self)
+{
+ return __bpf_fill_atomic32(self, BPF_XOR | BPF_FETCH);
+}
+
+static int bpf_fill_atomic32_xchg(struct bpf_test *self)
+{
+ return __bpf_fill_atomic32(self, BPF_XCHG);
+}
+
+static int bpf_fill_cmpxchg32(struct bpf_test *self)
+{
+ return __bpf_fill_pattern(self, NULL, 64, 64, 0, PATTERN_BLOCK2,
+ &__bpf_emit_cmpxchg32);
+}
+
/*
* Test the two-instruction 64-bit immediate load operation for all
* power-of-two magnitudes of the immediate operand. For each MSB, a block
@@ -10721,6 +11021,208 @@ static struct bpf_test tests[] = {
{ { 0, 1 } },
.fill_helper = bpf_fill_ld_imm64,
},
+ /* 64-bit ATOMIC magnitudes */
+ {
+ "ATOMIC_DW_ADD: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_add,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ {
+ "ATOMIC_DW_AND: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_and,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ {
+ "ATOMIC_DW_OR: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_or,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ {
+ "ATOMIC_DW_XOR: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_xor,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ {
+ "ATOMIC_DW_ADD_FETCH: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_add_fetch,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ {
+ "ATOMIC_DW_AND_FETCH: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_and_fetch,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ {
+ "ATOMIC_DW_OR_FETCH: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_or_fetch,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ {
+ "ATOMIC_DW_XOR_FETCH: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_xor_fetch,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ {
+ "ATOMIC_DW_XCHG: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_xchg,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ {
+ "ATOMIC_DW_CMPXCHG: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_cmpxchg64,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ /* 64-bit atomic magnitudes */
+ {
+ "ATOMIC_W_ADD: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_add,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ {
+ "ATOMIC_W_AND: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_and,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ {
+ "ATOMIC_W_OR: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_or,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ {
+ "ATOMIC_W_XOR: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_xor,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ {
+ "ATOMIC_W_ADD_FETCH: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_add_fetch,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ {
+ "ATOMIC_W_AND_FETCH: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_and_fetch,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ {
+ "ATOMIC_W_OR_FETCH: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_or_fetch,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ {
+ "ATOMIC_W_XOR_FETCH: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_xor_fetch,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ {
+ "ATOMIC_W_XCHG: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_xchg,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
+ {
+ "ATOMIC_W_CMPXCHG: all operand magnitudes",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_cmpxchg32,
+ .stack_depth = 8,
+ .nr_testruns = NR_PATTERN_RUNS,
+ },
/* JMP immediate magnitudes */
{
"JMP_JSET_K: all immediate value magnitudes",
--
2.30.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH bpf-next 04/10] bpf/tests: Add tests to check source register zero-extension
2021-10-01 13:03 [PATCH bpf-next 00/10] bpf/tests: Extend eBPF JIT test suite Johan Almbladh
` (2 preceding siblings ...)
2021-10-01 13:03 ` [PATCH bpf-next 03/10] bpf/tests: Add exhaustive tests of BPF_ATOMIC magnitudes Johan Almbladh
@ 2021-10-01 13:03 ` Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 05/10] bpf/tests: Add more tests for ALU and ATOMIC register clobbering Johan Almbladh
` (6 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Johan Almbladh @ 2021-10-01 13:03 UTC (permalink / raw)
To: ast, daniel, andrii
Cc: kafai, songliubraving, yhs, john.fastabend, kpsingh, iii, paul,
yangtiezhu, netdev, bpf, Johan Almbladh
This patch adds tests to check that the source register is preserved when
zero-extending a 32-bit value. In particular, it checks that the source
operand is not zero-extended in-place.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
---
lib/test_bpf.c | 143 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 143 insertions(+)
diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index 84efb23e09d0..c7db90112ef0 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -10586,6 +10586,149 @@ static struct bpf_test tests[] = {
{},
{ { 0, 2 } },
},
+ /* Checking that ALU32 src is not zero extended in place */
+#define BPF_ALU32_SRC_ZEXT(op) \
+ { \
+ "ALU32_" #op "_X: src preserved in zext", \
+ .u.insns_int = { \
+ BPF_LD_IMM64(R1, 0x0123456789acbdefULL),\
+ BPF_LD_IMM64(R2, 0xfedcba9876543210ULL),\
+ BPF_ALU64_REG(BPF_MOV, R0, R1), \
+ BPF_ALU32_REG(BPF_##op, R2, R1), \
+ BPF_ALU64_REG(BPF_SUB, R0, R1), \
+ BPF_ALU64_REG(BPF_MOV, R1, R0), \
+ BPF_ALU64_IMM(BPF_RSH, R1, 32), \
+ BPF_ALU64_REG(BPF_OR, R0, R1), \
+ BPF_EXIT_INSN(), \
+ }, \
+ INTERNAL, \
+ { }, \
+ { { 0, 0 } }, \
+ }
+ BPF_ALU32_SRC_ZEXT(MOV),
+ BPF_ALU32_SRC_ZEXT(AND),
+ BPF_ALU32_SRC_ZEXT(OR),
+ BPF_ALU32_SRC_ZEXT(XOR),
+ BPF_ALU32_SRC_ZEXT(ADD),
+ BPF_ALU32_SRC_ZEXT(SUB),
+ BPF_ALU32_SRC_ZEXT(MUL),
+ BPF_ALU32_SRC_ZEXT(DIV),
+ BPF_ALU32_SRC_ZEXT(MOD),
+#undef BPF_ALU32_SRC_ZEXT
+ /* Checking that ATOMIC32 src is not zero extended in place */
+#define BPF_ATOMIC32_SRC_ZEXT(op) \
+ { \
+ "ATOMIC_W_" #op ": src preserved in zext", \
+ .u.insns_int = { \
+ BPF_LD_IMM64(R0, 0x0123456789acbdefULL), \
+ BPF_ALU64_REG(BPF_MOV, R1, R0), \
+ BPF_ST_MEM(BPF_W, R10, -4, 0), \
+ BPF_ATOMIC_OP(BPF_W, BPF_##op, R10, R1, -4), \
+ BPF_ALU64_REG(BPF_SUB, R0, R1), \
+ BPF_ALU64_REG(BPF_MOV, R1, R0), \
+ BPF_ALU64_IMM(BPF_RSH, R1, 32), \
+ BPF_ALU64_REG(BPF_OR, R0, R1), \
+ BPF_EXIT_INSN(), \
+ }, \
+ INTERNAL, \
+ { }, \
+ { { 0, 0 } }, \
+ .stack_depth = 8, \
+ }
+ BPF_ATOMIC32_SRC_ZEXT(ADD),
+ BPF_ATOMIC32_SRC_ZEXT(AND),
+ BPF_ATOMIC32_SRC_ZEXT(OR),
+ BPF_ATOMIC32_SRC_ZEXT(XOR),
+#undef BPF_ATOMIC32_SRC_ZEXT
+ /* Checking that CMPXCHG32 src is not zero extended in place */
+ {
+ "ATOMIC_W_CMPXCHG: src preserved in zext",
+ .u.insns_int = {
+ BPF_LD_IMM64(R1, 0x0123456789acbdefULL),
+ BPF_ALU64_REG(BPF_MOV, R2, R1),
+ BPF_ALU64_REG(BPF_MOV, R0, 0),
+ BPF_ST_MEM(BPF_W, R10, -4, 0),
+ BPF_ATOMIC_OP(BPF_W, BPF_CMPXCHG, R10, R1, -4),
+ BPF_ALU64_REG(BPF_SUB, R1, R2),
+ BPF_ALU64_REG(BPF_MOV, R2, R1),
+ BPF_ALU64_IMM(BPF_RSH, R2, 32),
+ BPF_ALU64_REG(BPF_OR, R1, R2),
+ BPF_ALU64_REG(BPF_MOV, R0, R1),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 0 } },
+ .stack_depth = 8,
+ },
+ /* Checking that JMP32 immediate src is not zero extended in place */
+#define BPF_JMP32_IMM_ZEXT(op) \
+ { \
+ "JMP32_" #op "_K: operand preserved in zext", \
+ .u.insns_int = { \
+ BPF_LD_IMM64(R0, 0x0123456789acbdefULL),\
+ BPF_ALU64_REG(BPF_MOV, R1, R0), \
+ BPF_JMP32_IMM(BPF_##op, R0, 1234, 1), \
+ BPF_JMP_A(0), /* Nop */ \
+ BPF_ALU64_REG(BPF_SUB, R0, R1), \
+ BPF_ALU64_REG(BPF_MOV, R1, R0), \
+ BPF_ALU64_IMM(BPF_RSH, R1, 32), \
+ BPF_ALU64_REG(BPF_OR, R0, R1), \
+ BPF_EXIT_INSN(), \
+ }, \
+ INTERNAL, \
+ { }, \
+ { { 0, 0 } }, \
+ }
+ BPF_JMP32_IMM_ZEXT(JEQ),
+ BPF_JMP32_IMM_ZEXT(JNE),
+ BPF_JMP32_IMM_ZEXT(JSET),
+ BPF_JMP32_IMM_ZEXT(JGT),
+ BPF_JMP32_IMM_ZEXT(JGE),
+ BPF_JMP32_IMM_ZEXT(JLT),
+ BPF_JMP32_IMM_ZEXT(JLE),
+ BPF_JMP32_IMM_ZEXT(JSGT),
+ BPF_JMP32_IMM_ZEXT(JSGE),
+ BPF_JMP32_IMM_ZEXT(JSGT),
+ BPF_JMP32_IMM_ZEXT(JSLT),
+ BPF_JMP32_IMM_ZEXT(JSLE),
+#undef BPF_JMP2_IMM_ZEXT
+ /* Checking that JMP32 dst & src are not zero extended in place */
+#define BPF_JMP32_REG_ZEXT(op) \
+ { \
+ "JMP32_" #op "_X: operands preserved in zext", \
+ .u.insns_int = { \
+ BPF_LD_IMM64(R0, 0x0123456789acbdefULL),\
+ BPF_LD_IMM64(R1, 0xfedcba9876543210ULL),\
+ BPF_ALU64_REG(BPF_MOV, R2, R0), \
+ BPF_ALU64_REG(BPF_MOV, R3, R1), \
+ BPF_JMP32_IMM(BPF_##op, R0, R1, 1), \
+ BPF_JMP_A(0), /* Nop */ \
+ BPF_ALU64_REG(BPF_SUB, R0, R2), \
+ BPF_ALU64_REG(BPF_SUB, R1, R3), \
+ BPF_ALU64_REG(BPF_OR, R0, R1), \
+ BPF_ALU64_REG(BPF_MOV, R1, R0), \
+ BPF_ALU64_IMM(BPF_RSH, R1, 32), \
+ BPF_ALU64_REG(BPF_OR, R0, R1), \
+ BPF_EXIT_INSN(), \
+ }, \
+ INTERNAL, \
+ { }, \
+ { { 0, 0 } }, \
+ }
+ BPF_JMP32_REG_ZEXT(JEQ),
+ BPF_JMP32_REG_ZEXT(JNE),
+ BPF_JMP32_REG_ZEXT(JSET),
+ BPF_JMP32_REG_ZEXT(JGT),
+ BPF_JMP32_REG_ZEXT(JGE),
+ BPF_JMP32_REG_ZEXT(JLT),
+ BPF_JMP32_REG_ZEXT(JLE),
+ BPF_JMP32_REG_ZEXT(JSGT),
+ BPF_JMP32_REG_ZEXT(JSGE),
+ BPF_JMP32_REG_ZEXT(JSGT),
+ BPF_JMP32_REG_ZEXT(JSLT),
+ BPF_JMP32_REG_ZEXT(JSLE),
+#undef BPF_JMP2_REG_ZEXT
/* Exhaustive test of ALU64 shift operations */
{
"ALU64_LSH_K: all shift values",
--
2.30.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH bpf-next 05/10] bpf/tests: Add more tests for ALU and ATOMIC register clobbering
2021-10-01 13:03 [PATCH bpf-next 00/10] bpf/tests: Extend eBPF JIT test suite Johan Almbladh
` (3 preceding siblings ...)
2021-10-01 13:03 ` [PATCH bpf-next 04/10] bpf/tests: Add tests to check source register zero-extension Johan Almbladh
@ 2021-10-01 13:03 ` Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 06/10] bpf/tests: Minor restructuring of ALU tests Johan Almbladh
` (5 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Johan Almbladh @ 2021-10-01 13:03 UTC (permalink / raw)
To: ast, daniel, andrii
Cc: kafai, songliubraving, yhs, john.fastabend, kpsingh, iii, paul,
yangtiezhu, netdev, bpf, Johan Almbladh
This patch expands the register-clobbering-during-function-call tests
to cover more all ALU32/64 MUL, DIV and MOD operations and all ATOMIC
operations. In short, if a JIT implements a complex operation with
a call to an external function, it must make sure to save and restore
all its caller-saved registers that may be clobbered by the call.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
---
lib/test_bpf.c | 267 ++++++++++++++++++++++++++++++++++++-------------
1 file changed, 197 insertions(+), 70 deletions(-)
diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index c7db90112ef0..201f34060eef 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -3744,76 +3744,6 @@ static struct bpf_test tests[] = {
{ },
{ { 0, -1 } }
},
- {
- /*
- * Register (non-)clobbering test, in the case where a 32-bit
- * JIT implements complex ALU64 operations via function calls.
- * If so, the function call must be invisible in the eBPF
- * registers. The JIT must then save and restore relevant
- * registers during the call. The following tests check that
- * the eBPF registers retain their values after such a call.
- */
- "INT: Register clobbering, R1 updated",
- .u.insns_int = {
- BPF_ALU32_IMM(BPF_MOV, R0, 0),
- BPF_ALU32_IMM(BPF_MOV, R1, 123456789),
- BPF_ALU32_IMM(BPF_MOV, R2, 2),
- BPF_ALU32_IMM(BPF_MOV, R3, 3),
- BPF_ALU32_IMM(BPF_MOV, R4, 4),
- BPF_ALU32_IMM(BPF_MOV, R5, 5),
- BPF_ALU32_IMM(BPF_MOV, R6, 6),
- BPF_ALU32_IMM(BPF_MOV, R7, 7),
- BPF_ALU32_IMM(BPF_MOV, R8, 8),
- BPF_ALU32_IMM(BPF_MOV, R9, 9),
- BPF_ALU64_IMM(BPF_DIV, R1, 123456789),
- BPF_JMP_IMM(BPF_JNE, R0, 0, 10),
- BPF_JMP_IMM(BPF_JNE, R1, 1, 9),
- BPF_JMP_IMM(BPF_JNE, R2, 2, 8),
- BPF_JMP_IMM(BPF_JNE, R3, 3, 7),
- BPF_JMP_IMM(BPF_JNE, R4, 4, 6),
- BPF_JMP_IMM(BPF_JNE, R5, 5, 5),
- BPF_JMP_IMM(BPF_JNE, R6, 6, 4),
- BPF_JMP_IMM(BPF_JNE, R7, 7, 3),
- BPF_JMP_IMM(BPF_JNE, R8, 8, 2),
- BPF_JMP_IMM(BPF_JNE, R9, 9, 1),
- BPF_ALU32_IMM(BPF_MOV, R0, 1),
- BPF_EXIT_INSN(),
- },
- INTERNAL,
- { },
- { { 0, 1 } }
- },
- {
- "INT: Register clobbering, R2 updated",
- .u.insns_int = {
- BPF_ALU32_IMM(BPF_MOV, R0, 0),
- BPF_ALU32_IMM(BPF_MOV, R1, 1),
- BPF_ALU32_IMM(BPF_MOV, R2, 2 * 123456789),
- BPF_ALU32_IMM(BPF_MOV, R3, 3),
- BPF_ALU32_IMM(BPF_MOV, R4, 4),
- BPF_ALU32_IMM(BPF_MOV, R5, 5),
- BPF_ALU32_IMM(BPF_MOV, R6, 6),
- BPF_ALU32_IMM(BPF_MOV, R7, 7),
- BPF_ALU32_IMM(BPF_MOV, R8, 8),
- BPF_ALU32_IMM(BPF_MOV, R9, 9),
- BPF_ALU64_IMM(BPF_DIV, R2, 123456789),
- BPF_JMP_IMM(BPF_JNE, R0, 0, 10),
- BPF_JMP_IMM(BPF_JNE, R1, 1, 9),
- BPF_JMP_IMM(BPF_JNE, R2, 2, 8),
- BPF_JMP_IMM(BPF_JNE, R3, 3, 7),
- BPF_JMP_IMM(BPF_JNE, R4, 4, 6),
- BPF_JMP_IMM(BPF_JNE, R5, 5, 5),
- BPF_JMP_IMM(BPF_JNE, R6, 6, 4),
- BPF_JMP_IMM(BPF_JNE, R7, 7, 3),
- BPF_JMP_IMM(BPF_JNE, R8, 8, 2),
- BPF_JMP_IMM(BPF_JNE, R9, 9, 1),
- BPF_ALU32_IMM(BPF_MOV, R0, 1),
- BPF_EXIT_INSN(),
- },
- INTERNAL,
- { },
- { { 0, 1 } }
- },
{
/*
* Test 32-bit JITs that implement complex ALU64 operations as
@@ -10586,6 +10516,203 @@ static struct bpf_test tests[] = {
{},
{ { 0, 2 } },
},
+ /*
+ * Register (non-)clobbering tests for the case where a JIT implements
+ * complex ALU or ATOMIC operations via function calls. If so, the
+ * function call must be transparent to the eBPF registers. The JIT
+ * must therefore save and restore relevant registers across the call.
+ * The following tests check that the eBPF registers retain their
+ * values after such an operation. Mainly intended for complex ALU
+ * and atomic operation, but we run it for all. You never know...
+ *
+ * Note that each operations should be tested twice with different
+ * destinations, to check preservation for all registers.
+ */
+#define BPF_TEST_CLOBBER_ALU(alu, op, dst, src) \
+ { \
+ #alu "_" #op " to " #dst ": no clobbering", \
+ .u.insns_int = { \
+ BPF_ALU64_IMM(BPF_MOV, R0, R0), \
+ BPF_ALU64_IMM(BPF_MOV, R1, R1), \
+ BPF_ALU64_IMM(BPF_MOV, R2, R2), \
+ BPF_ALU64_IMM(BPF_MOV, R3, R3), \
+ BPF_ALU64_IMM(BPF_MOV, R4, R4), \
+ BPF_ALU64_IMM(BPF_MOV, R5, R5), \
+ BPF_ALU64_IMM(BPF_MOV, R6, R6), \
+ BPF_ALU64_IMM(BPF_MOV, R7, R7), \
+ BPF_ALU64_IMM(BPF_MOV, R8, R8), \
+ BPF_ALU64_IMM(BPF_MOV, R9, R9), \
+ BPF_##alu(BPF_ ##op, dst, src), \
+ BPF_ALU32_IMM(BPF_MOV, dst, dst), \
+ BPF_JMP_IMM(BPF_JNE, R0, R0, 10), \
+ BPF_JMP_IMM(BPF_JNE, R1, R1, 9), \
+ BPF_JMP_IMM(BPF_JNE, R2, R2, 8), \
+ BPF_JMP_IMM(BPF_JNE, R3, R3, 7), \
+ BPF_JMP_IMM(BPF_JNE, R4, R4, 6), \
+ BPF_JMP_IMM(BPF_JNE, R5, R5, 5), \
+ BPF_JMP_IMM(BPF_JNE, R6, R6, 4), \
+ BPF_JMP_IMM(BPF_JNE, R7, R7, 3), \
+ BPF_JMP_IMM(BPF_JNE, R8, R8, 2), \
+ BPF_JMP_IMM(BPF_JNE, R9, R9, 1), \
+ BPF_ALU64_IMM(BPF_MOV, R0, 1), \
+ BPF_EXIT_INSN(), \
+ }, \
+ INTERNAL, \
+ { }, \
+ { { 0, 1 } } \
+ }
+ /* ALU64 operations, register clobbering */
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, AND, R8, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, AND, R9, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, OR, R8, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, OR, R9, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, XOR, R8, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, XOR, R9, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, LSH, R8, 12),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, LSH, R9, 12),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, RSH, R8, 12),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, RSH, R9, 12),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, ARSH, R8, 12),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, ARSH, R9, 12),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, ADD, R8, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, ADD, R9, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, SUB, R8, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, SUB, R9, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, MUL, R8, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, MUL, R9, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, DIV, R8, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, DIV, R9, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, MOD, R8, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU64_IMM, MOD, R9, 123456789),
+ /* ALU32 immediate operations, register clobbering */
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, AND, R8, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, AND, R9, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, OR, R8, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, OR, R9, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, XOR, R8, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, XOR, R9, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, LSH, R8, 12),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, LSH, R9, 12),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, RSH, R8, 12),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, RSH, R9, 12),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, ARSH, R8, 12),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, ARSH, R9, 12),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, ADD, R8, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, ADD, R9, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, SUB, R8, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, SUB, R9, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, MUL, R8, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, MUL, R9, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, DIV, R8, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, DIV, R9, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, MOD, R8, 123456789),
+ BPF_TEST_CLOBBER_ALU(ALU32_IMM, MOD, R9, 123456789),
+ /* ALU64 register operations, register clobbering */
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, AND, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, AND, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, OR, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, OR, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, XOR, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, XOR, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, LSH, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, LSH, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, RSH, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, RSH, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, ARSH, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, ARSH, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, ADD, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, ADD, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, SUB, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, SUB, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, MUL, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, MUL, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, DIV, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, DIV, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, MOD, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU64_REG, MOD, R9, R1),
+ /* ALU32 register operations, register clobbering */
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, AND, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, AND, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, OR, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, OR, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, XOR, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, XOR, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, LSH, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, LSH, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, RSH, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, RSH, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, ARSH, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, ARSH, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, ADD, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, ADD, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, SUB, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, SUB, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, MUL, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, MUL, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, DIV, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, DIV, R9, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, MOD, R8, R1),
+ BPF_TEST_CLOBBER_ALU(ALU32_REG, MOD, R9, R1),
+#undef BPF_TEST_CLOBBER_ALU
+#define BPF_TEST_CLOBBER_ATOMIC(width, op) \
+ { \
+ "Atomic_" #width " " #op ": no clobbering", \
+ .u.insns_int = { \
+ BPF_ALU64_IMM(BPF_MOV, R0, 0), \
+ BPF_ALU64_IMM(BPF_MOV, R1, 1), \
+ BPF_ALU64_IMM(BPF_MOV, R2, 2), \
+ BPF_ALU64_IMM(BPF_MOV, R3, 3), \
+ BPF_ALU64_IMM(BPF_MOV, R4, 4), \
+ BPF_ALU64_IMM(BPF_MOV, R5, 5), \
+ BPF_ALU64_IMM(BPF_MOV, R6, 6), \
+ BPF_ALU64_IMM(BPF_MOV, R7, 7), \
+ BPF_ALU64_IMM(BPF_MOV, R8, 8), \
+ BPF_ALU64_IMM(BPF_MOV, R9, 9), \
+ BPF_ST_MEM(width, R10, -8, \
+ (op) == BPF_CMPXCHG ? 0 : \
+ (op) & BPF_FETCH ? 1 : 0), \
+ BPF_ATOMIC_OP(width, op, R10, R1, -8), \
+ BPF_JMP_IMM(BPF_JNE, R0, 0, 10), \
+ BPF_JMP_IMM(BPF_JNE, R1, 1, 9), \
+ BPF_JMP_IMM(BPF_JNE, R2, 2, 8), \
+ BPF_JMP_IMM(BPF_JNE, R3, 3, 7), \
+ BPF_JMP_IMM(BPF_JNE, R4, 4, 6), \
+ BPF_JMP_IMM(BPF_JNE, R5, 5, 5), \
+ BPF_JMP_IMM(BPF_JNE, R6, 6, 4), \
+ BPF_JMP_IMM(BPF_JNE, R7, 7, 3), \
+ BPF_JMP_IMM(BPF_JNE, R8, 8, 2), \
+ BPF_JMP_IMM(BPF_JNE, R9, 9, 1), \
+ BPF_ALU64_IMM(BPF_MOV, R0, 1), \
+ BPF_EXIT_INSN(), \
+ }, \
+ INTERNAL, \
+ { }, \
+ { { 0, 1 } }, \
+ .stack_depth = 8, \
+ }
+ /* 64-bit atomic operations, register clobbering */
+ BPF_TEST_CLOBBER_ATOMIC(BPF_DW, BPF_ADD),
+ BPF_TEST_CLOBBER_ATOMIC(BPF_DW, BPF_AND),
+ BPF_TEST_CLOBBER_ATOMIC(BPF_DW, BPF_OR),
+ BPF_TEST_CLOBBER_ATOMIC(BPF_DW, BPF_XOR),
+ BPF_TEST_CLOBBER_ATOMIC(BPF_DW, BPF_ADD | BPF_FETCH),
+ BPF_TEST_CLOBBER_ATOMIC(BPF_DW, BPF_AND | BPF_FETCH),
+ BPF_TEST_CLOBBER_ATOMIC(BPF_DW, BPF_OR | BPF_FETCH),
+ BPF_TEST_CLOBBER_ATOMIC(BPF_DW, BPF_XOR | BPF_FETCH),
+ BPF_TEST_CLOBBER_ATOMIC(BPF_DW, BPF_XCHG),
+ BPF_TEST_CLOBBER_ATOMIC(BPF_DW, BPF_CMPXCHG),
+ /* 32-bit atomic operations, register clobbering */
+ BPF_TEST_CLOBBER_ATOMIC(BPF_W, BPF_ADD),
+ BPF_TEST_CLOBBER_ATOMIC(BPF_W, BPF_AND),
+ BPF_TEST_CLOBBER_ATOMIC(BPF_W, BPF_OR),
+ BPF_TEST_CLOBBER_ATOMIC(BPF_W, BPF_XOR),
+ BPF_TEST_CLOBBER_ATOMIC(BPF_W, BPF_ADD | BPF_FETCH),
+ BPF_TEST_CLOBBER_ATOMIC(BPF_W, BPF_AND | BPF_FETCH),
+ BPF_TEST_CLOBBER_ATOMIC(BPF_W, BPF_OR | BPF_FETCH),
+ BPF_TEST_CLOBBER_ATOMIC(BPF_W, BPF_XOR | BPF_FETCH),
+ BPF_TEST_CLOBBER_ATOMIC(BPF_W, BPF_XCHG),
+ BPF_TEST_CLOBBER_ATOMIC(BPF_W, BPF_CMPXCHG),
+#undef BPF_TEST_CLOBBER_ATOMIC
/* Checking that ALU32 src is not zero extended in place */
#define BPF_ALU32_SRC_ZEXT(op) \
{ \
--
2.30.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH bpf-next 06/10] bpf/tests: Minor restructuring of ALU tests
2021-10-01 13:03 [PATCH bpf-next 00/10] bpf/tests: Extend eBPF JIT test suite Johan Almbladh
` (4 preceding siblings ...)
2021-10-01 13:03 ` [PATCH bpf-next 05/10] bpf/tests: Add more tests for ALU and ATOMIC register clobbering Johan Almbladh
@ 2021-10-01 13:03 ` Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 07/10] bpf/tests: Add exhaustive tests of ALU register combinations Johan Almbladh
` (4 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Johan Almbladh @ 2021-10-01 13:03 UTC (permalink / raw)
To: ast, daniel, andrii
Cc: kafai, songliubraving, yhs, john.fastabend, kpsingh, iii, paul,
yangtiezhu, netdev, bpf, Johan Almbladh
This patch moves the ALU LSH/RSH/ARSH reference computations into the
common reference value function. Also fix typo in constants so they
now have the intended values.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
---
lib/test_bpf.c | 137 +++++++++++++++++++++++--------------------------
1 file changed, 65 insertions(+), 72 deletions(-)
diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index 201f34060eef..919323a3b69f 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -538,6 +538,57 @@ static int bpf_fill_max_jmp_never_taken(struct bpf_test *self)
return __bpf_fill_max_jmp(self, BPF_JLT, 0);
}
+/* ALU result computation used in tests */
+static bool __bpf_alu_result(u64 *res, u64 v1, u64 v2, u8 op)
+{
+ *res = 0;
+ switch (op) {
+ case BPF_MOV:
+ *res = v2;
+ break;
+ case BPF_AND:
+ *res = v1 & v2;
+ break;
+ case BPF_OR:
+ *res = v1 | v2;
+ break;
+ case BPF_XOR:
+ *res = v1 ^ v2;
+ break;
+ case BPF_LSH:
+ *res = v1 << v2;
+ break;
+ case BPF_RSH:
+ *res = v1 >> v2;
+ break;
+ case BPF_ARSH:
+ *res = v1 >> v2;
+ if (v2 > 0 && v1 > S64_MAX)
+ *res |= ~0ULL << (64 - v2);
+ break;
+ case BPF_ADD:
+ *res = v1 + v2;
+ break;
+ case BPF_SUB:
+ *res = v1 - v2;
+ break;
+ case BPF_MUL:
+ *res = v1 * v2;
+ break;
+ case BPF_DIV:
+ if (v2 == 0)
+ return false;
+ *res = div64_u64(v1, v2);
+ break;
+ case BPF_MOD:
+ if (v2 == 0)
+ return false;
+ div64_u64_rem(v1, v2, res);
+ break;
+ }
+ return true;
+}
+
/* Test an ALU shift operation for all valid shift values */
static int __bpf_fill_alu_shift(struct bpf_test *self, u8 op,
u8 mode, bool alu32)
@@ -576,37 +627,19 @@ static int __bpf_fill_alu_shift(struct bpf_test *self, u8 op,
insn[i++] = BPF_ALU32_IMM(op, R1, imm);
else
insn[i++] = BPF_ALU32_REG(op, R1, R2);
- switch (op) {
- case BPF_LSH:
- val = (u32)reg << imm;
- break;
- case BPF_RSH:
- val = (u32)reg >> imm;
- break;
- case BPF_ARSH:
- val = (u32)reg >> imm;
- if (imm > 0 && (reg & 0x80000000))
- val |= ~(u32)0 << (32 - imm);
- break;
- }
+
+ if (op == BPF_ARSH)
+ reg = (s32)reg;
+ else
+ reg = (u32)reg;
+ __bpf_alu_result(&val, reg, imm, op);
+ val = (u32)val;
} else {
if (mode == BPF_K)
insn[i++] = BPF_ALU64_IMM(op, R1, imm);
else
insn[i++] = BPF_ALU64_REG(op, R1, R2);
- switch (op) {
- case BPF_LSH:
- val = (u64)reg << imm;
- break;
- case BPF_RSH:
- val = (u64)reg >> imm;
- break;
- case BPF_ARSH:
- val = (u64)reg >> imm;
- if (imm > 0 && reg < 0)
- val |= ~(u64)0 << (64 - imm);
- break;
- }
+ __bpf_alu_result(&val, reg, imm, op);
}
/*
@@ -799,46 +832,6 @@ static int __bpf_fill_pattern(struct bpf_test *self, void *arg,
* test is designed to verify e.g. the ALU and ALU64 operations for JITs that
* emit different code depending on the magnitude of the immediate value.
*/
-
-static bool __bpf_alu_result(u64 *res, u64 v1, u64 v2, u8 op)
-{
- *res = 0;
- switch (op) {
- case BPF_MOV:
- *res = v2;
- break;
- case BPF_AND:
- *res = v1 & v2;
- break;
- case BPF_OR:
- *res = v1 | v2;
- break;
- case BPF_XOR:
- *res = v1 ^ v2;
- break;
- case BPF_ADD:
- *res = v1 + v2;
- break;
- case BPF_SUB:
- *res = v1 - v2;
- break;
- case BPF_MUL:
- *res = v1 * v2;
- break;
- case BPF_DIV:
- if (v2 == 0)
- return false;
- *res = div64_u64(v1, v2);
- break;
- case BPF_MOD:
- if (v2 == 0)
- return false;
- div64_u64_rem(v1, v2, res);
- break;
- }
- return true;
-}
-
static int __bpf_emit_alu64_imm(struct bpf_test *self, void *arg,
struct bpf_insn *insns, s64 dst, s64 imm)
{
@@ -7881,7 +7874,7 @@ static struct bpf_test tests[] = {
"BPF_ATOMIC | BPF_DW, BPF_CMPXCHG: Test successful return",
.u.insns_int = {
BPF_LD_IMM64(R1, 0x0123456789abcdefULL),
- BPF_LD_IMM64(R2, 0xfecdba9876543210ULL),
+ BPF_LD_IMM64(R2, 0xfedcba9876543210ULL),
BPF_ALU64_REG(BPF_MOV, R0, R1),
BPF_STX_MEM(BPF_DW, R10, R1, -40),
BPF_ATOMIC_OP(BPF_DW, BPF_CMPXCHG, R10, R2, -40),
@@ -7898,7 +7891,7 @@ static struct bpf_test tests[] = {
"BPF_ATOMIC | BPF_DW, BPF_CMPXCHG: Test successful store",
.u.insns_int = {
BPF_LD_IMM64(R1, 0x0123456789abcdefULL),
- BPF_LD_IMM64(R2, 0xfecdba9876543210ULL),
+ BPF_LD_IMM64(R2, 0xfedcba9876543210ULL),
BPF_ALU64_REG(BPF_MOV, R0, R1),
BPF_STX_MEM(BPF_DW, R10, R0, -40),
BPF_ATOMIC_OP(BPF_DW, BPF_CMPXCHG, R10, R2, -40),
@@ -7916,7 +7909,7 @@ static struct bpf_test tests[] = {
"BPF_ATOMIC | BPF_DW, BPF_CMPXCHG: Test failure return",
.u.insns_int = {
BPF_LD_IMM64(R1, 0x0123456789abcdefULL),
- BPF_LD_IMM64(R2, 0xfecdba9876543210ULL),
+ BPF_LD_IMM64(R2, 0xfedcba9876543210ULL),
BPF_ALU64_REG(BPF_MOV, R0, R1),
BPF_ALU64_IMM(BPF_ADD, R0, 1),
BPF_STX_MEM(BPF_DW, R10, R1, -40),
@@ -7934,7 +7927,7 @@ static struct bpf_test tests[] = {
"BPF_ATOMIC | BPF_DW, BPF_CMPXCHG: Test failure store",
.u.insns_int = {
BPF_LD_IMM64(R1, 0x0123456789abcdefULL),
- BPF_LD_IMM64(R2, 0xfecdba9876543210ULL),
+ BPF_LD_IMM64(R2, 0xfedcba9876543210ULL),
BPF_ALU64_REG(BPF_MOV, R0, R1),
BPF_ALU64_IMM(BPF_ADD, R0, 1),
BPF_STX_MEM(BPF_DW, R10, R1, -40),
@@ -7953,11 +7946,11 @@ static struct bpf_test tests[] = {
"BPF_ATOMIC | BPF_DW, BPF_CMPXCHG: Test side effects",
.u.insns_int = {
BPF_LD_IMM64(R1, 0x0123456789abcdefULL),
- BPF_LD_IMM64(R2, 0xfecdba9876543210ULL),
+ BPF_LD_IMM64(R2, 0xfedcba9876543210ULL),
BPF_ALU64_REG(BPF_MOV, R0, R1),
BPF_STX_MEM(BPF_DW, R10, R1, -40),
BPF_ATOMIC_OP(BPF_DW, BPF_CMPXCHG, R10, R2, -40),
- BPF_LD_IMM64(R0, 0xfecdba9876543210ULL),
+ BPF_LD_IMM64(R0, 0xfedcba9876543210ULL),
BPF_JMP_REG(BPF_JNE, R0, R2, 1),
BPF_ALU64_REG(BPF_SUB, R0, R2),
BPF_EXIT_INSN(),
--
2.30.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH bpf-next 07/10] bpf/tests: Add exhaustive tests of ALU register combinations
2021-10-01 13:03 [PATCH bpf-next 00/10] bpf/tests: Extend eBPF JIT test suite Johan Almbladh
` (5 preceding siblings ...)
2021-10-01 13:03 ` [PATCH bpf-next 06/10] bpf/tests: Minor restructuring of ALU tests Johan Almbladh
@ 2021-10-01 13:03 ` Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 08/10] bpf/tests: Add exhaustive tests of BPF_ATOMIC " Johan Almbladh
` (3 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Johan Almbladh @ 2021-10-01 13:03 UTC (permalink / raw)
To: ast, daniel, andrii
Cc: kafai, songliubraving, yhs, john.fastabend, kpsingh, iii, paul,
yangtiezhu, netdev, bpf, Johan Almbladh
This patch replaces the current register combination test with new
exhaustive tests. Before, only a subset of register combinations was
tested for ALU64 DIV. Now, all combinatons of operand registers are
tested, including the case when they are the same, and for all ALU32
and ALU64 operations.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
---
lib/test_bpf.c | 834 ++++++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 763 insertions(+), 71 deletions(-)
diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index 919323a3b69f..924bf4c9783c 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -1130,6 +1130,381 @@ static int bpf_fill_alu32_mod_reg(struct bpf_test *self)
return __bpf_fill_alu32_reg(self, BPF_MOD);
}
+/*
+ * Test JITs that implement complex ALU operations as function
+ * calls, and must re-arrange operands for argument passing.
+ */
+static int __bpf_fill_alu_imm_regs(struct bpf_test *self, u8 op, bool alu32)
+{
+ int len = 2 + 10 * 10;
+ struct bpf_insn *insns;
+ u64 dst, res;
+ int i = 0;
+ u32 imm;
+ int rd;
+
+ insns = kmalloc_array(len, sizeof(*insns), GFP_KERNEL);
+ if (!insns)
+ return -ENOMEM;
+
+ /* Operand and result values according to operation */
+ if (alu32)
+ dst = 0x76543210U;
+ else
+ dst = 0x7edcba9876543210ULL;
+ imm = 0x01234567U;
+
+ if (op == BPF_LSH || op == BPF_RSH || op == BPF_ARSH)
+ imm &= 31;
+
+ __bpf_alu_result(&res, dst, imm, op);
+
+ if (alu32)
+ res = (u32)res;
+
+ /* Check all operand registers */
+ for (rd = R0; rd <= R9; rd++) {
+ i += __bpf_ld_imm64(&insns[i], rd, dst);
+
+ if (alu32)
+ insns[i++] = BPF_ALU32_IMM(op, rd, imm);
+ else
+ insns[i++] = BPF_ALU64_IMM(op, rd, imm);
+
+ insns[i++] = BPF_JMP32_IMM(BPF_JEQ, rd, res, 2);
+ insns[i++] = BPF_MOV64_IMM(R0, __LINE__);
+ insns[i++] = BPF_EXIT_INSN();
+
+ insns[i++] = BPF_ALU64_IMM(BPF_RSH, rd, 32);
+ insns[i++] = BPF_JMP32_IMM(BPF_JEQ, rd, res >> 32, 2);
+ insns[i++] = BPF_MOV64_IMM(R0, __LINE__);
+ insns[i++] = BPF_EXIT_INSN();
+ }
+
+ insns[i++] = BPF_MOV64_IMM(R0, 1);
+ insns[i++] = BPF_EXIT_INSN();
+
+ self->u.ptr.insns = insns;
+ self->u.ptr.len = len;
+ BUG_ON(i != len);
+
+ return 0;
+}
+
+/* ALU64 K registers */
+static int bpf_fill_alu64_mov_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_MOV, false);
+}
+
+static int bpf_fill_alu64_and_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_AND, false);
+}
+
+static int bpf_fill_alu64_or_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_OR, false);
+}
+
+static int bpf_fill_alu64_xor_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_XOR, false);
+}
+
+static int bpf_fill_alu64_lsh_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_LSH, false);
+}
+
+static int bpf_fill_alu64_rsh_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_RSH, false);
+}
+
+static int bpf_fill_alu64_arsh_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_ARSH, false);
+}
+
+static int bpf_fill_alu64_add_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_ADD, false);
+}
+
+static int bpf_fill_alu64_sub_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_SUB, false);
+}
+
+static int bpf_fill_alu64_mul_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_MUL, false);
+}
+
+static int bpf_fill_alu64_div_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_DIV, false);
+}
+
+static int bpf_fill_alu64_mod_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_MOD, false);
+}
+
+/* ALU32 K registers */
+static int bpf_fill_alu32_mov_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_MOV, true);
+}
+
+static int bpf_fill_alu32_and_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_AND, true);
+}
+
+static int bpf_fill_alu32_or_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_OR, true);
+}
+
+static int bpf_fill_alu32_xor_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_XOR, true);
+}
+
+static int bpf_fill_alu32_lsh_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_LSH, true);
+}
+
+static int bpf_fill_alu32_rsh_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_RSH, true);
+}
+
+static int bpf_fill_alu32_arsh_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_ARSH, true);
+}
+
+static int bpf_fill_alu32_add_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_ADD, true);
+}
+
+static int bpf_fill_alu32_sub_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_SUB, true);
+}
+
+static int bpf_fill_alu32_mul_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_MUL, true);
+}
+
+static int bpf_fill_alu32_div_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_DIV, true);
+}
+
+static int bpf_fill_alu32_mod_imm_regs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_imm_regs(self, BPF_MOD, true);
+}
+
+/*
+ * Test JITs that implement complex ALU operations as function
+ * calls, and must re-arrange operands for argument passing.
+ */
+static int __bpf_fill_alu_reg_pairs(struct bpf_test *self, u8 op, bool alu32)
+{
+ int len = 2 + 10 * 10 * 12;
+ u64 dst, src, res, same;
+ struct bpf_insn *insns;
+ int rd, rs;
+ int i = 0;
+
+ insns = kmalloc_array(len, sizeof(*insns), GFP_KERNEL);
+ if (!insns)
+ return -ENOMEM;
+
+ /* Operand and result values according to operation */
+ if (alu32) {
+ dst = 0x76543210U;
+ src = 0x01234567U;
+ } else {
+ dst = 0x7edcba9876543210ULL;
+ src = 0x0123456789abcdefULL;
+ }
+
+ if (op == BPF_LSH || op == BPF_RSH || op == BPF_ARSH)
+ src &= 31;
+
+ __bpf_alu_result(&res, dst, src, op);
+ __bpf_alu_result(&same, src, src, op);
+
+ if (alu32) {
+ res = (u32)res;
+ same = (u32)same;
+ }
+
+ /* Check all combinations of operand registers */
+ for (rd = R0; rd <= R9; rd++) {
+ for (rs = R0; rs <= R9; rs++) {
+ u64 val = rd == rs ? same : res;
+
+ i += __bpf_ld_imm64(&insns[i], rd, dst);
+ i += __bpf_ld_imm64(&insns[i], rs, src);
+
+ if (alu32)
+ insns[i++] = BPF_ALU32_REG(op, rd, rs);
+ else
+ insns[i++] = BPF_ALU64_REG(op, rd, rs);
+
+ insns[i++] = BPF_JMP32_IMM(BPF_JEQ, rd, val, 2);
+ insns[i++] = BPF_MOV64_IMM(R0, __LINE__);
+ insns[i++] = BPF_EXIT_INSN();
+
+ insns[i++] = BPF_ALU64_IMM(BPF_RSH, rd, 32);
+ insns[i++] = BPF_JMP32_IMM(BPF_JEQ, rd, val >> 32, 2);
+ insns[i++] = BPF_MOV64_IMM(R0, __LINE__);
+ insns[i++] = BPF_EXIT_INSN();
+ }
+ }
+
+ insns[i++] = BPF_MOV64_IMM(R0, 1);
+ insns[i++] = BPF_EXIT_INSN();
+
+ self->u.ptr.insns = insns;
+ self->u.ptr.len = len;
+ BUG_ON(i != len);
+
+ return 0;
+}
+
+/* ALU64 X register combinations */
+static int bpf_fill_alu64_mov_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_MOV, false);
+}
+
+static int bpf_fill_alu64_and_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_AND, false);
+}
+
+static int bpf_fill_alu64_or_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_OR, false);
+}
+
+static int bpf_fill_alu64_xor_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_XOR, false);
+}
+
+static int bpf_fill_alu64_lsh_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_LSH, false);
+}
+
+static int bpf_fill_alu64_rsh_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_RSH, false);
+}
+
+static int bpf_fill_alu64_arsh_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_ARSH, false);
+}
+
+static int bpf_fill_alu64_add_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_ADD, false);
+}
+
+static int bpf_fill_alu64_sub_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_SUB, false);
+}
+
+static int bpf_fill_alu64_mul_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_MUL, false);
+}
+
+static int bpf_fill_alu64_div_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_DIV, false);
+}
+
+static int bpf_fill_alu64_mod_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_MOD, false);
+}
+
+/* ALU32 X register combinations */
+static int bpf_fill_alu32_mov_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_MOV, true);
+}
+
+static int bpf_fill_alu32_and_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_AND, true);
+}
+
+static int bpf_fill_alu32_or_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_OR, true);
+}
+
+static int bpf_fill_alu32_xor_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_XOR, true);
+}
+
+static int bpf_fill_alu32_lsh_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_LSH, true);
+}
+
+static int bpf_fill_alu32_rsh_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_RSH, true);
+}
+
+static int bpf_fill_alu32_arsh_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_ARSH, true);
+}
+
+static int bpf_fill_alu32_add_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_ADD, true);
+}
+
+static int bpf_fill_alu32_sub_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_SUB, true);
+}
+
+static int bpf_fill_alu32_mul_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_MUL, true);
+}
+
+static int bpf_fill_alu32_div_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_DIV, true);
+}
+
+static int bpf_fill_alu32_mod_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_alu_reg_pairs(self, BPF_MOD, true);
+}
+
/*
* Exhaustive tests of atomic operations for all power-of-two operand
* magnitudes, both for positive and negative values.
@@ -3737,77 +4112,6 @@ static struct bpf_test tests[] = {
{ },
{ { 0, -1 } }
},
- {
- /*
- * Test 32-bit JITs that implement complex ALU64 operations as
- * function calls R0 = f(R1, R2), and must re-arrange operands.
- */
-#define NUMER 0xfedcba9876543210ULL
-#define DENOM 0x0123456789abcdefULL
- "ALU64_DIV X: Operand register permutations",
- .u.insns_int = {
- /* R0 / R2 */
- BPF_LD_IMM64(R0, NUMER),
- BPF_LD_IMM64(R2, DENOM),
- BPF_ALU64_REG(BPF_DIV, R0, R2),
- BPF_JMP_IMM(BPF_JEQ, R0, NUMER / DENOM, 1),
- BPF_EXIT_INSN(),
- /* R1 / R0 */
- BPF_LD_IMM64(R1, NUMER),
- BPF_LD_IMM64(R0, DENOM),
- BPF_ALU64_REG(BPF_DIV, R1, R0),
- BPF_JMP_IMM(BPF_JEQ, R1, NUMER / DENOM, 1),
- BPF_EXIT_INSN(),
- /* R0 / R1 */
- BPF_LD_IMM64(R0, NUMER),
- BPF_LD_IMM64(R1, DENOM),
- BPF_ALU64_REG(BPF_DIV, R0, R1),
- BPF_JMP_IMM(BPF_JEQ, R0, NUMER / DENOM, 1),
- BPF_EXIT_INSN(),
- /* R2 / R0 */
- BPF_LD_IMM64(R2, NUMER),
- BPF_LD_IMM64(R0, DENOM),
- BPF_ALU64_REG(BPF_DIV, R2, R0),
- BPF_JMP_IMM(BPF_JEQ, R2, NUMER / DENOM, 1),
- BPF_EXIT_INSN(),
- /* R2 / R1 */
- BPF_LD_IMM64(R2, NUMER),
- BPF_LD_IMM64(R1, DENOM),
- BPF_ALU64_REG(BPF_DIV, R2, R1),
- BPF_JMP_IMM(BPF_JEQ, R2, NUMER / DENOM, 1),
- BPF_EXIT_INSN(),
- /* R1 / R2 */
- BPF_LD_IMM64(R1, NUMER),
- BPF_LD_IMM64(R2, DENOM),
- BPF_ALU64_REG(BPF_DIV, R1, R2),
- BPF_JMP_IMM(BPF_JEQ, R1, NUMER / DENOM, 1),
- BPF_EXIT_INSN(),
- /* R1 / R1 */
- BPF_LD_IMM64(R1, NUMER),
- BPF_ALU64_REG(BPF_DIV, R1, R1),
- BPF_JMP_IMM(BPF_JEQ, R1, 1, 1),
- BPF_EXIT_INSN(),
- /* R2 / R2 */
- BPF_LD_IMM64(R2, DENOM),
- BPF_ALU64_REG(BPF_DIV, R2, R2),
- BPF_JMP_IMM(BPF_JEQ, R2, 1, 1),
- BPF_EXIT_INSN(),
- /* R3 / R4 */
- BPF_LD_IMM64(R3, NUMER),
- BPF_LD_IMM64(R4, DENOM),
- BPF_ALU64_REG(BPF_DIV, R3, R4),
- BPF_JMP_IMM(BPF_JEQ, R3, NUMER / DENOM, 1),
- BPF_EXIT_INSN(),
- /* Successful return */
- BPF_LD_IMM64(R0, 1),
- BPF_EXIT_INSN(),
- },
- INTERNAL,
- { },
- { { 0, 1 } },
-#undef NUMER
-#undef DENOM
- },
#ifdef CONFIG_32BIT
{
"INT: 32-bit context pointer word order and zero-extension",
@@ -10849,6 +11153,394 @@ static struct bpf_test tests[] = {
BPF_JMP32_REG_ZEXT(JSLT),
BPF_JMP32_REG_ZEXT(JSLE),
#undef BPF_JMP2_REG_ZEXT
+ /* ALU64 K register combinations */
+ {
+ "ALU64_MOV_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_mov_imm_regs,
+ },
+ {
+ "ALU64_AND_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_and_imm_regs,
+ },
+ {
+ "ALU64_OR_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_or_imm_regs,
+ },
+ {
+ "ALU64_XOR_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_xor_imm_regs,
+ },
+ {
+ "ALU64_LSH_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_lsh_imm_regs,
+ },
+ {
+ "ALU64_RSH_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_rsh_imm_regs,
+ },
+ {
+ "ALU64_ARSH_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_arsh_imm_regs,
+ },
+ {
+ "ALU64_ADD_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_add_imm_regs,
+ },
+ {
+ "ALU64_SUB_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_sub_imm_regs,
+ },
+ {
+ "ALU64_MUL_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_mul_imm_regs,
+ },
+ {
+ "ALU64_DIV_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_div_imm_regs,
+ },
+ {
+ "ALU64_MOD_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_mod_imm_regs,
+ },
+ /* ALU32 K registers */
+ {
+ "ALU32_MOV_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_mov_imm_regs,
+ },
+ {
+ "ALU32_AND_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_and_imm_regs,
+ },
+ {
+ "ALU32_OR_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_or_imm_regs,
+ },
+ {
+ "ALU32_XOR_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_xor_imm_regs,
+ },
+ {
+ "ALU32_LSH_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_lsh_imm_regs,
+ },
+ {
+ "ALU32_RSH_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_rsh_imm_regs,
+ },
+ {
+ "ALU32_ARSH_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_arsh_imm_regs,
+ },
+ {
+ "ALU32_ADD_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_add_imm_regs,
+ },
+ {
+ "ALU32_SUB_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_sub_imm_regs,
+ },
+ {
+ "ALU32_MUL_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_mul_imm_regs,
+ },
+ {
+ "ALU32_DIV_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_div_imm_regs,
+ },
+ {
+ "ALU32_MOD_K: registers",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_mod_imm_regs,
+ },
+ /* ALU64 X register combinations */
+ {
+ "ALU64_MOV_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_mov_reg_pairs,
+ },
+ {
+ "ALU64_AND_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_and_reg_pairs,
+ },
+ {
+ "ALU64_OR_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_or_reg_pairs,
+ },
+ {
+ "ALU64_XOR_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_xor_reg_pairs,
+ },
+ {
+ "ALU64_LSH_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_lsh_reg_pairs,
+ },
+ {
+ "ALU64_RSH_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_rsh_reg_pairs,
+ },
+ {
+ "ALU64_ARSH_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_arsh_reg_pairs,
+ },
+ {
+ "ALU64_ADD_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_add_reg_pairs,
+ },
+ {
+ "ALU64_SUB_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_sub_reg_pairs,
+ },
+ {
+ "ALU64_MUL_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_mul_reg_pairs,
+ },
+ {
+ "ALU64_DIV_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_div_reg_pairs,
+ },
+ {
+ "ALU64_MOD_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_mod_reg_pairs,
+ },
+ /* ALU32 X register combinations */
+ {
+ "ALU32_MOV_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_mov_reg_pairs,
+ },
+ {
+ "ALU32_AND_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_and_reg_pairs,
+ },
+ {
+ "ALU32_OR_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_or_reg_pairs,
+ },
+ {
+ "ALU32_XOR_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_xor_reg_pairs,
+ },
+ {
+ "ALU32_LSH_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_lsh_reg_pairs,
+ },
+ {
+ "ALU32_RSH_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_rsh_reg_pairs,
+ },
+ {
+ "ALU32_ARSH_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_arsh_reg_pairs,
+ },
+ {
+ "ALU32_ADD_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_add_reg_pairs,
+ },
+ {
+ "ALU32_SUB_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_sub_reg_pairs,
+ },
+ {
+ "ALU32_MUL_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_mul_reg_pairs,
+ },
+ {
+ "ALU32_DIV_X: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_div_reg_pairs,
+ },
+ {
+ "ALU32_MOD_X register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_mod_reg_pairs,
+ },
/* Exhaustive test of ALU64 shift operations */
{
"ALU64_LSH_K: all shift values",
--
2.30.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH bpf-next 08/10] bpf/tests: Add exhaustive tests of BPF_ATOMIC register combinations
2021-10-01 13:03 [PATCH bpf-next 00/10] bpf/tests: Extend eBPF JIT test suite Johan Almbladh
` (6 preceding siblings ...)
2021-10-01 13:03 ` [PATCH bpf-next 07/10] bpf/tests: Add exhaustive tests of ALU register combinations Johan Almbladh
@ 2021-10-01 13:03 ` Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 09/10] bpf/tests: Add test of ALU shifts with operand register aliasing Johan Almbladh
` (2 subsequent siblings)
10 siblings, 0 replies; 12+ messages in thread
From: Johan Almbladh @ 2021-10-01 13:03 UTC (permalink / raw)
To: ast, daniel, andrii
Cc: kafai, songliubraving, yhs, john.fastabend, kpsingh, iii, paul,
yangtiezhu, netdev, bpf, Johan Almbladh
This patch adds tests of all register combinations for BPF_ATOMIC
operations on both BPF_W and BPF_DW sizes.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
---
lib/test_bpf.c | 422 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 422 insertions(+)
diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index 924bf4c9783c..40db4cee4f51 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -1805,6 +1805,246 @@ static int bpf_fill_cmpxchg32(struct bpf_test *self)
&__bpf_emit_cmpxchg32);
}
+/*
+ * Test JITs that implement ATOMIC operations as function calls or
+ * other primitives, and must re-arrange operands for argument passing.
+ */
+static int __bpf_fill_atomic_reg_pairs(struct bpf_test *self, u8 width, u8 op)
+{
+ struct bpf_insn *insn;
+ int len = 2 + 34 * 10 * 10;
+ u64 mem, upd, res;
+ int rd, rs, i = 0;
+
+ insn = kmalloc_array(len, sizeof(*insn), GFP_KERNEL);
+ if (!insn)
+ return -ENOMEM;
+
+ /* Operand and memory values */
+ if (width == BPF_DW) {
+ mem = 0x0123456789abcdefULL;
+ upd = 0xfedcba9876543210ULL;
+ } else { /* BPF_W */
+ mem = 0x01234567U;
+ upd = 0x76543210U;
+ }
+
+ /* Memory updated according to operation */
+ switch (op) {
+ case BPF_XCHG:
+ res = upd;
+ break;
+ case BPF_CMPXCHG:
+ res = mem;
+ break;
+ default:
+ __bpf_alu_result(&res, mem, upd, BPF_OP(op));
+ }
+
+ /* Test all operand registers */
+ for (rd = R0; rd <= R9; rd++) {
+ for (rs = R0; rs <= R9; rs++) {
+ u64 cmp, src;
+
+ /* Initialize value in memory */
+ i += __bpf_ld_imm64(&insn[i], R0, mem);
+ insn[i++] = BPF_STX_MEM(width, R10, R0, -8);
+
+ /* Initialize registers in order */
+ i += __bpf_ld_imm64(&insn[i], R0, ~mem);
+ i += __bpf_ld_imm64(&insn[i], rs, upd);
+ insn[i++] = BPF_MOV64_REG(rd, R10);
+
+ /* Perform atomic operation */
+ insn[i++] = BPF_ATOMIC_OP(width, op, rd, rs, -8);
+ if (op == BPF_CMPXCHG && width == BPF_W)
+ insn[i++] = BPF_ZEXT_REG(R0);
+
+ /* Check R0 register value */
+ if (op == BPF_CMPXCHG)
+ cmp = mem; /* Expect value from memory */
+ else if (R0 == rd || R0 == rs)
+ cmp = 0; /* Aliased, checked below */
+ else
+ cmp = ~mem; /* Expect value to be preserved */
+ if (cmp) {
+ insn[i++] = BPF_JMP32_IMM(BPF_JEQ, R0,
+ (u32)cmp, 2);
+ insn[i++] = BPF_MOV32_IMM(R0, __LINE__);
+ insn[i++] = BPF_EXIT_INSN();
+ insn[i++] = BPF_ALU64_IMM(BPF_RSH, R0, 32);
+ insn[i++] = BPF_JMP32_IMM(BPF_JEQ, R0,
+ cmp >> 32, 2);
+ insn[i++] = BPF_MOV32_IMM(R0, __LINE__);
+ insn[i++] = BPF_EXIT_INSN();
+ }
+
+ /* Check source register value */
+ if (rs == R0 && op == BPF_CMPXCHG)
+ src = 0; /* Aliased with R0, checked above */
+ else if (rs == rd && (op == BPF_CMPXCHG ||
+ !(op & BPF_FETCH)))
+ src = 0; /* Aliased with rd, checked below */
+ else if (op == BPF_CMPXCHG)
+ src = upd; /* Expect value to be preserved */
+ else if (op & BPF_FETCH)
+ src = mem; /* Expect fetched value from mem */
+ else /* no fetch */
+ src = upd; /* Expect value to be preserved */
+ if (src) {
+ insn[i++] = BPF_JMP32_IMM(BPF_JEQ, rs,
+ (u32)src, 2);
+ insn[i++] = BPF_MOV32_IMM(R0, __LINE__);
+ insn[i++] = BPF_EXIT_INSN();
+ insn[i++] = BPF_ALU64_IMM(BPF_RSH, rs, 32);
+ insn[i++] = BPF_JMP32_IMM(BPF_JEQ, rs,
+ src >> 32, 2);
+ insn[i++] = BPF_MOV32_IMM(R0, __LINE__);
+ insn[i++] = BPF_EXIT_INSN();
+ }
+
+ /* Check destination register value */
+ if (!(rd == R0 && op == BPF_CMPXCHG) &&
+ !(rd == rs && (op & BPF_FETCH))) {
+ insn[i++] = BPF_JMP_REG(BPF_JEQ, rd, R10, 2);
+ insn[i++] = BPF_MOV32_IMM(R0, __LINE__);
+ insn[i++] = BPF_EXIT_INSN();
+ }
+
+ /* Check value in memory */
+ if (rs != rd) { /* No aliasing */
+ i += __bpf_ld_imm64(&insn[i], R1, res);
+ } else if (op == BPF_XCHG) { /* Aliased, XCHG */
+ insn[i++] = BPF_MOV64_REG(R1, R10);
+ } else if (op == BPF_CMPXCHG) { /* Aliased, CMPXCHG */
+ i += __bpf_ld_imm64(&insn[i], R1, mem);
+ } else { /* Aliased, ALU oper */
+ i += __bpf_ld_imm64(&insn[i], R1, mem);
+ insn[i++] = BPF_ALU64_REG(BPF_OP(op), R1, R10);
+ }
+
+ insn[i++] = BPF_LDX_MEM(width, R0, R10, -8);
+ if (width == BPF_DW)
+ insn[i++] = BPF_JMP_REG(BPF_JEQ, R0, R1, 2);
+ else /* width == BPF_W */
+ insn[i++] = BPF_JMP32_REG(BPF_JEQ, R0, R1, 2);
+ insn[i++] = BPF_MOV32_IMM(R0, __LINE__);
+ insn[i++] = BPF_EXIT_INSN();
+ }
+ }
+
+ insn[i++] = BPF_MOV64_IMM(R0, 1);
+ insn[i++] = BPF_EXIT_INSN();
+
+ self->u.ptr.insns = insn;
+ self->u.ptr.len = i;
+ BUG_ON(i > len);
+
+ return 0;
+}
+
+/* 64-bit atomic register tests */
+static int bpf_fill_atomic64_add_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_DW, BPF_ADD);
+}
+
+static int bpf_fill_atomic64_and_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_DW, BPF_AND);
+}
+
+static int bpf_fill_atomic64_or_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_DW, BPF_OR);
+}
+
+static int bpf_fill_atomic64_xor_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_DW, BPF_XOR);
+}
+
+static int bpf_fill_atomic64_add_fetch_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_DW, BPF_ADD | BPF_FETCH);
+}
+
+static int bpf_fill_atomic64_and_fetch_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_DW, BPF_AND | BPF_FETCH);
+}
+
+static int bpf_fill_atomic64_or_fetch_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_DW, BPF_OR | BPF_FETCH);
+}
+
+static int bpf_fill_atomic64_xor_fetch_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_DW, BPF_XOR | BPF_FETCH);
+}
+
+static int bpf_fill_atomic64_xchg_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_DW, BPF_XCHG);
+}
+
+static int bpf_fill_atomic64_cmpxchg_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_DW, BPF_CMPXCHG);
+}
+
+/* 32-bit atomic register tests */
+static int bpf_fill_atomic32_add_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_W, BPF_ADD);
+}
+
+static int bpf_fill_atomic32_and_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_W, BPF_AND);
+}
+
+static int bpf_fill_atomic32_or_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_W, BPF_OR);
+}
+
+static int bpf_fill_atomic32_xor_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_W, BPF_XOR);
+}
+
+static int bpf_fill_atomic32_add_fetch_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_W, BPF_ADD | BPF_FETCH);
+}
+
+static int bpf_fill_atomic32_and_fetch_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_W, BPF_AND | BPF_FETCH);
+}
+
+static int bpf_fill_atomic32_or_fetch_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_W, BPF_OR | BPF_FETCH);
+}
+
+static int bpf_fill_atomic32_xor_fetch_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_W, BPF_XOR | BPF_FETCH);
+}
+
+static int bpf_fill_atomic32_xchg_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_W, BPF_XCHG);
+}
+
+static int bpf_fill_atomic32_cmpxchg_reg_pairs(struct bpf_test *self)
+{
+ return __bpf_fill_atomic_reg_pairs(self, BPF_W, BPF_CMPXCHG);
+}
+
/*
* Test the two-instruction 64-bit immediate load operation for all
* power-of-two magnitudes of the immediate operand. For each MSB, a block
@@ -11976,6 +12216,188 @@ static struct bpf_test tests[] = {
{ { 0, 1 } },
.fill_helper = bpf_fill_ld_imm64,
},
+ /* 64-bit ATOMIC register combinations */
+ {
+ "ATOMIC_DW_ADD: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_add_reg_pairs,
+ .stack_depth = 8,
+ },
+ {
+ "ATOMIC_DW_AND: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_and_reg_pairs,
+ .stack_depth = 8,
+ },
+ {
+ "ATOMIC_DW_OR: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_or_reg_pairs,
+ .stack_depth = 8,
+ },
+ {
+ "ATOMIC_DW_XOR: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_xor_reg_pairs,
+ .stack_depth = 8,
+ },
+ {
+ "ATOMIC_DW_ADD_FETCH: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_add_fetch_reg_pairs,
+ .stack_depth = 8,
+ },
+ {
+ "ATOMIC_DW_AND_FETCH: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_and_fetch_reg_pairs,
+ .stack_depth = 8,
+ },
+ {
+ "ATOMIC_DW_OR_FETCH: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_or_fetch_reg_pairs,
+ .stack_depth = 8,
+ },
+ {
+ "ATOMIC_DW_XOR_FETCH: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_xor_fetch_reg_pairs,
+ .stack_depth = 8,
+ },
+ {
+ "ATOMIC_DW_XCHG: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_xchg_reg_pairs,
+ .stack_depth = 8,
+ },
+ {
+ "ATOMIC_DW_CMPXCHG: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic64_cmpxchg_reg_pairs,
+ .stack_depth = 8,
+ },
+ /* 32-bit ATOMIC register combinations */
+ {
+ "ATOMIC_W_ADD: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_add_reg_pairs,
+ .stack_depth = 8,
+ },
+ {
+ "ATOMIC_W_AND: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_and_reg_pairs,
+ .stack_depth = 8,
+ },
+ {
+ "ATOMIC_W_OR: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_or_reg_pairs,
+ .stack_depth = 8,
+ },
+ {
+ "ATOMIC_W_XOR: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_xor_reg_pairs,
+ .stack_depth = 8,
+ },
+ {
+ "ATOMIC_W_ADD_FETCH: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_add_fetch_reg_pairs,
+ .stack_depth = 8,
+ },
+ {
+ "ATOMIC_W_AND_FETCH: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_and_fetch_reg_pairs,
+ .stack_depth = 8,
+ },
+ {
+ "ATOMIC_W_OR_FETCH: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_or_fetch_reg_pairs,
+ .stack_depth = 8,
+ },
+ {
+ "ATOMIC_W_XOR_FETCH: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_xor_fetch_reg_pairs,
+ .stack_depth = 8,
+ },
+ {
+ "ATOMIC_W_XCHG: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_xchg_reg_pairs,
+ .stack_depth = 8,
+ },
+ {
+ "ATOMIC_W_CMPXCHG: register combinations",
+ { },
+ INTERNAL,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_atomic32_cmpxchg_reg_pairs,
+ .stack_depth = 8,
+ },
/* 64-bit ATOMIC magnitudes */
{
"ATOMIC_DW_ADD: all operand magnitudes",
--
2.30.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH bpf-next 09/10] bpf/tests: Add test of ALU shifts with operand register aliasing
2021-10-01 13:03 [PATCH bpf-next 00/10] bpf/tests: Extend eBPF JIT test suite Johan Almbladh
` (7 preceding siblings ...)
2021-10-01 13:03 ` [PATCH bpf-next 08/10] bpf/tests: Add exhaustive tests of BPF_ATOMIC " Johan Almbladh
@ 2021-10-01 13:03 ` Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 10/10] bpf/tests: Add test of LDX_MEM with operand aliasing Johan Almbladh
2021-10-01 15:10 ` [PATCH bpf-next 00/10] bpf/tests: Extend eBPF JIT test suite patchwork-bot+netdevbpf
10 siblings, 0 replies; 12+ messages in thread
From: Johan Almbladh @ 2021-10-01 13:03 UTC (permalink / raw)
To: ast, daniel, andrii
Cc: kafai, songliubraving, yhs, john.fastabend, kpsingh, iii, paul,
yangtiezhu, netdev, bpf, Johan Almbladh
This patch adds a tests of ALU32 and ALU64 LSH/RSH/ARSH operations for the
case when the two operands are the same register. Mainly intended to test
JITs that implement ALU64 shifts with 32-bit CPU instructions.
Also renamed related helper functions for consistency with the new tests.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
---
lib/test_bpf.c | 162 +++++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 149 insertions(+), 13 deletions(-)
diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index 40db4cee4f51..dfcbdff714b6 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -660,37 +660,37 @@ static int __bpf_fill_alu_shift(struct bpf_test *self, u8 op,
self->u.ptr.insns = insn;
self->u.ptr.len = len;
- BUG_ON(i > len);
+ BUG_ON(i != len);
return 0;
}
-static int bpf_fill_alu_lsh_imm(struct bpf_test *self)
+static int bpf_fill_alu64_lsh_imm(struct bpf_test *self)
{
return __bpf_fill_alu_shift(self, BPF_LSH, BPF_K, false);
}
-static int bpf_fill_alu_rsh_imm(struct bpf_test *self)
+static int bpf_fill_alu64_rsh_imm(struct bpf_test *self)
{
return __bpf_fill_alu_shift(self, BPF_RSH, BPF_K, false);
}
-static int bpf_fill_alu_arsh_imm(struct bpf_test *self)
+static int bpf_fill_alu64_arsh_imm(struct bpf_test *self)
{
return __bpf_fill_alu_shift(self, BPF_ARSH, BPF_K, false);
}
-static int bpf_fill_alu_lsh_reg(struct bpf_test *self)
+static int bpf_fill_alu64_lsh_reg(struct bpf_test *self)
{
return __bpf_fill_alu_shift(self, BPF_LSH, BPF_X, false);
}
-static int bpf_fill_alu_rsh_reg(struct bpf_test *self)
+static int bpf_fill_alu64_rsh_reg(struct bpf_test *self)
{
return __bpf_fill_alu_shift(self, BPF_RSH, BPF_X, false);
}
-static int bpf_fill_alu_arsh_reg(struct bpf_test *self)
+static int bpf_fill_alu64_arsh_reg(struct bpf_test *self)
{
return __bpf_fill_alu_shift(self, BPF_ARSH, BPF_X, false);
}
@@ -725,6 +725,86 @@ static int bpf_fill_alu32_arsh_reg(struct bpf_test *self)
return __bpf_fill_alu_shift(self, BPF_ARSH, BPF_X, true);
}
+/*
+ * Test an ALU register shift operation for all valid shift values
+ * for the case when the source and destination are the same.
+ */
+static int __bpf_fill_alu_shift_same_reg(struct bpf_test *self, u8 op,
+ bool alu32)
+{
+ int bits = alu32 ? 32 : 64;
+ int len = 3 + 6 * bits;
+ struct bpf_insn *insn;
+ int i = 0;
+ u64 val;
+
+ insn = kmalloc_array(len, sizeof(*insn), GFP_KERNEL);
+ if (!insn)
+ return -ENOMEM;
+
+ insn[i++] = BPF_ALU64_IMM(BPF_MOV, R0, 0);
+
+ for (val = 0; val < bits; val++) {
+ u64 res;
+
+ /* Perform operation */
+ insn[i++] = BPF_ALU64_IMM(BPF_MOV, R1, val);
+ if (alu32)
+ insn[i++] = BPF_ALU32_REG(op, R1, R1);
+ else
+ insn[i++] = BPF_ALU64_REG(op, R1, R1);
+
+ /* Compute the reference result */
+ __bpf_alu_result(&res, val, val, op);
+ if (alu32)
+ res = (u32)res;
+ i += __bpf_ld_imm64(&insn[i], R2, res);
+
+ /* Check the actual result */
+ insn[i++] = BPF_JMP_REG(BPF_JEQ, R1, R2, 1);
+ insn[i++] = BPF_EXIT_INSN();
+ }
+
+ insn[i++] = BPF_ALU64_IMM(BPF_MOV, R0, 1);
+ insn[i++] = BPF_EXIT_INSN();
+
+ self->u.ptr.insns = insn;
+ self->u.ptr.len = len;
+ BUG_ON(i != len);
+
+ return 0;
+}
+
+static int bpf_fill_alu64_lsh_same_reg(struct bpf_test *self)
+{
+ return __bpf_fill_alu_shift_same_reg(self, BPF_LSH, false);
+}
+
+static int bpf_fill_alu64_rsh_same_reg(struct bpf_test *self)
+{
+ return __bpf_fill_alu_shift_same_reg(self, BPF_RSH, false);
+}
+
+static int bpf_fill_alu64_arsh_same_reg(struct bpf_test *self)
+{
+ return __bpf_fill_alu_shift_same_reg(self, BPF_ARSH, false);
+}
+
+static int bpf_fill_alu32_lsh_same_reg(struct bpf_test *self)
+{
+ return __bpf_fill_alu_shift_same_reg(self, BPF_LSH, true);
+}
+
+static int bpf_fill_alu32_rsh_same_reg(struct bpf_test *self)
+{
+ return __bpf_fill_alu_shift_same_reg(self, BPF_RSH, true);
+}
+
+static int bpf_fill_alu32_arsh_same_reg(struct bpf_test *self)
+{
+ return __bpf_fill_alu_shift_same_reg(self, BPF_ARSH, true);
+}
+
/*
* Common operand pattern generator for exhaustive power-of-two magnitudes
* tests. The block size parameters can be adjusted to increase/reduce the
@@ -11788,7 +11868,7 @@ static struct bpf_test tests[] = {
INTERNAL | FLAG_NO_DATA,
{ },
{ { 0, 1 } },
- .fill_helper = bpf_fill_alu_lsh_imm,
+ .fill_helper = bpf_fill_alu64_lsh_imm,
},
{
"ALU64_RSH_K: all shift values",
@@ -11796,7 +11876,7 @@ static struct bpf_test tests[] = {
INTERNAL | FLAG_NO_DATA,
{ },
{ { 0, 1 } },
- .fill_helper = bpf_fill_alu_rsh_imm,
+ .fill_helper = bpf_fill_alu64_rsh_imm,
},
{
"ALU64_ARSH_K: all shift values",
@@ -11804,7 +11884,7 @@ static struct bpf_test tests[] = {
INTERNAL | FLAG_NO_DATA,
{ },
{ { 0, 1 } },
- .fill_helper = bpf_fill_alu_arsh_imm,
+ .fill_helper = bpf_fill_alu64_arsh_imm,
},
{
"ALU64_LSH_X: all shift values",
@@ -11812,7 +11892,7 @@ static struct bpf_test tests[] = {
INTERNAL | FLAG_NO_DATA,
{ },
{ { 0, 1 } },
- .fill_helper = bpf_fill_alu_lsh_reg,
+ .fill_helper = bpf_fill_alu64_lsh_reg,
},
{
"ALU64_RSH_X: all shift values",
@@ -11820,7 +11900,7 @@ static struct bpf_test tests[] = {
INTERNAL | FLAG_NO_DATA,
{ },
{ { 0, 1 } },
- .fill_helper = bpf_fill_alu_rsh_reg,
+ .fill_helper = bpf_fill_alu64_rsh_reg,
},
{
"ALU64_ARSH_X: all shift values",
@@ -11828,7 +11908,7 @@ static struct bpf_test tests[] = {
INTERNAL | FLAG_NO_DATA,
{ },
{ { 0, 1 } },
- .fill_helper = bpf_fill_alu_arsh_reg,
+ .fill_helper = bpf_fill_alu64_arsh_reg,
},
/* Exhaustive test of ALU32 shift operations */
{
@@ -11879,6 +11959,62 @@ static struct bpf_test tests[] = {
{ { 0, 1 } },
.fill_helper = bpf_fill_alu32_arsh_reg,
},
+ /*
+ * Exhaustive test of ALU64 shift operations when
+ * source and destination register are the same.
+ */
+ {
+ "ALU64_LSH_X: all shift values with the same register",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_lsh_same_reg,
+ },
+ {
+ "ALU64_RSH_X: all shift values with the same register",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_rsh_same_reg,
+ },
+ {
+ "ALU64_ARSH_X: all shift values with the same register",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu64_arsh_same_reg,
+ },
+ /*
+ * Exhaustive test of ALU32 shift operations when
+ * source and destination register are the same.
+ */
+ {
+ "ALU32_LSH_X: all shift values with the same register",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_lsh_same_reg,
+ },
+ {
+ "ALU32_RSH_X: all shift values with the same register",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_rsh_same_reg,
+ },
+ {
+ "ALU32_ARSH_X: all shift values with the same register",
+ { },
+ INTERNAL | FLAG_NO_DATA,
+ { },
+ { { 0, 1 } },
+ .fill_helper = bpf_fill_alu32_arsh_same_reg,
+ },
/* ALU64 immediate magnitudes */
{
"ALU64_MOV_K: all immediate value magnitudes",
--
2.30.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH bpf-next 10/10] bpf/tests: Add test of LDX_MEM with operand aliasing
2021-10-01 13:03 [PATCH bpf-next 00/10] bpf/tests: Extend eBPF JIT test suite Johan Almbladh
` (8 preceding siblings ...)
2021-10-01 13:03 ` [PATCH bpf-next 09/10] bpf/tests: Add test of ALU shifts with operand register aliasing Johan Almbladh
@ 2021-10-01 13:03 ` Johan Almbladh
2021-10-01 15:10 ` [PATCH bpf-next 00/10] bpf/tests: Extend eBPF JIT test suite patchwork-bot+netdevbpf
10 siblings, 0 replies; 12+ messages in thread
From: Johan Almbladh @ 2021-10-01 13:03 UTC (permalink / raw)
To: ast, daniel, andrii
Cc: kafai, songliubraving, yhs, john.fastabend, kpsingh, iii, paul,
yangtiezhu, netdev, bpf, Johan Almbladh
This patch adds a set of tests of BPF_LDX_MEM where both operand registers
are the same register. Mainly testing 32-bit JITs that may load a 64-bit
value in two 32-bit loads, and must not overwrite the address register.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
---
lib/test_bpf.c | 58 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index dfcbdff714b6..b9fc330fc83b 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -11133,6 +11133,64 @@ static struct bpf_test tests[] = {
{},
{ { 0, 2 } },
},
+ /* BPF_LDX_MEM with operand aliasing */
+ {
+ "LDX_MEM_B: operand register aliasing",
+ .u.insns_int = {
+ BPF_ST_MEM(BPF_B, R10, -8, 123),
+ BPF_MOV64_REG(R0, R10),
+ BPF_LDX_MEM(BPF_B, R0, R0, -8),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 123 } },
+ .stack_depth = 8,
+ },
+ {
+ "LDX_MEM_H: operand register aliasing",
+ .u.insns_int = {
+ BPF_ST_MEM(BPF_H, R10, -8, 12345),
+ BPF_MOV64_REG(R0, R10),
+ BPF_LDX_MEM(BPF_H, R0, R0, -8),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 12345 } },
+ .stack_depth = 8,
+ },
+ {
+ "LDX_MEM_W: operand register aliasing",
+ .u.insns_int = {
+ BPF_ST_MEM(BPF_W, R10, -8, 123456789),
+ BPF_MOV64_REG(R0, R10),
+ BPF_LDX_MEM(BPF_W, R0, R0, -8),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 123456789 } },
+ .stack_depth = 8,
+ },
+ {
+ "LDX_MEM_DW: operand register aliasing",
+ .u.insns_int = {
+ BPF_LD_IMM64(R1, 0x123456789abcdefULL),
+ BPF_STX_MEM(BPF_DW, R10, R1, -8),
+ BPF_MOV64_REG(R0, R10),
+ BPF_LDX_MEM(BPF_DW, R0, R0, -8),
+ BPF_ALU64_REG(BPF_SUB, R0, R1),
+ BPF_MOV64_REG(R1, R0),
+ BPF_ALU64_IMM(BPF_RSH, R1, 32),
+ BPF_ALU64_REG(BPF_OR, R0, R1),
+ BPF_EXIT_INSN(),
+ },
+ INTERNAL,
+ { },
+ { { 0, 0 } },
+ .stack_depth = 8,
+ },
/*
* Register (non-)clobbering tests for the case where a JIT implements
* complex ALU or ATOMIC operations via function calls. If so, the
--
2.30.2
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH bpf-next 00/10] bpf/tests: Extend eBPF JIT test suite
2021-10-01 13:03 [PATCH bpf-next 00/10] bpf/tests: Extend eBPF JIT test suite Johan Almbladh
` (9 preceding siblings ...)
2021-10-01 13:03 ` [PATCH bpf-next 10/10] bpf/tests: Add test of LDX_MEM with operand aliasing Johan Almbladh
@ 2021-10-01 15:10 ` patchwork-bot+netdevbpf
10 siblings, 0 replies; 12+ messages in thread
From: patchwork-bot+netdevbpf @ 2021-10-01 15:10 UTC (permalink / raw)
To: Johan Almbladh
Cc: ast, daniel, andrii, kafai, songliubraving, yhs, john.fastabend,
kpsingh, iii, paul, yangtiezhu, netdev, bpf
Hello:
This series was applied to bpf/bpf-next.git (refs/heads/master):
On Fri, 1 Oct 2021 15:03:38 +0200 you wrote:
> This patch set adds a number of new tests to the test_bpf.ko test suite.
> The new tests focus on the behaviour of operations with different
> combinations of register operands, and in particular, when two or more
> register operands are in fact the same register. It also verifies things
> like a src register not being zero-extended in-place in ALU32 operations,
> and that operations implemented with function calls do not clobber any
> other eBPF registers.
>
> [...]
Here is the summary with links:
- [bpf-next,01/10] bpf/tests: Add tests of BPF_LDX and BPF_STX with small sizes
https://git.kernel.org/bpf/bpf-next/c/caaaa1667bf1
- [bpf-next,02/10] bpf/tests: Add zero-extension checks in BPF_ATOMIC tests
https://git.kernel.org/bpf/bpf-next/c/89b63462765c
- [bpf-next,03/10] bpf/tests: Add exhaustive tests of BPF_ATOMIC magnitudes
https://git.kernel.org/bpf/bpf-next/c/f68e8efd7fa5
- [bpf-next,04/10] bpf/tests: Add tests to check source register zero-extension
https://git.kernel.org/bpf/bpf-next/c/0bbaa02b4816
- [bpf-next,05/10] bpf/tests: Add more tests for ALU and ATOMIC register clobbering
https://git.kernel.org/bpf/bpf-next/c/e2f9797b3c73
- [bpf-next,06/10] bpf/tests: Minor restructuring of ALU tests
https://git.kernel.org/bpf/bpf-next/c/e42fc3c2c40e
- [bpf-next,07/10] bpf/tests: Add exhaustive tests of ALU register combinations
https://git.kernel.org/bpf/bpf-next/c/daed6083f4fb
- [bpf-next,08/10] bpf/tests: Add exhaustive tests of BPF_ATOMIC register combinations
https://git.kernel.org/bpf/bpf-next/c/6fae2e8a1d9e
- [bpf-next,09/10] bpf/tests: Add test of ALU shifts with operand register aliasing
https://git.kernel.org/bpf/bpf-next/c/68813605dea6
- [bpf-next,10/10] bpf/tests: Add test of LDX_MEM with operand aliasing
https://git.kernel.org/bpf/bpf-next/c/7bceeb95726b
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2021-10-01 15:10 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-01 13:03 [PATCH bpf-next 00/10] bpf/tests: Extend eBPF JIT test suite Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 01/10] bpf/tests: Add tests of BPF_LDX and BPF_STX with small sizes Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 02/10] bpf/tests: Add zero-extension checks in BPF_ATOMIC tests Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 03/10] bpf/tests: Add exhaustive tests of BPF_ATOMIC magnitudes Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 04/10] bpf/tests: Add tests to check source register zero-extension Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 05/10] bpf/tests: Add more tests for ALU and ATOMIC register clobbering Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 06/10] bpf/tests: Minor restructuring of ALU tests Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 07/10] bpf/tests: Add exhaustive tests of ALU register combinations Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 08/10] bpf/tests: Add exhaustive tests of BPF_ATOMIC " Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 09/10] bpf/tests: Add test of ALU shifts with operand register aliasing Johan Almbladh
2021-10-01 13:03 ` [PATCH bpf-next 10/10] bpf/tests: Add test of LDX_MEM with operand aliasing Johan Almbladh
2021-10-01 15:10 ` [PATCH bpf-next 00/10] bpf/tests: Extend eBPF JIT test suite patchwork-bot+netdevbpf
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).