* [PATCH bpf-next v4] test_bpf: Add module parameter test_suite
@ 2021-10-09 1:50 Tiezhu Yang
2021-10-13 7:52 ` Johan Almbladh
0 siblings, 1 reply; 2+ messages in thread
From: Tiezhu Yang @ 2021-10-09 1:50 UTC (permalink / raw)
To: Alexei Starovoitov, Daniel Borkmann, Andrii Nakryiko
Cc: netdev, bpf, linux-kernel, Xuefeng Li, Johan Almbladh,
Martin KaFai Lau, Song Liu, Yonghong Song, John Fastabend,
KP Singh
After commit 9298e63eafea ("bpf/tests: Add exhaustive tests of ALU
operand magnitudes"), when modprobe test_bpf.ko with jit on mips64,
there exists segment fault due to the following reason:
ALU64_MOV_X: all register value magnitudes jited:1
Break instruction in kernel code[#1]
It seems that the related jit implementations of some test cases
in test_bpf() have problems. At this moment, I do not care about
the segment fault while I just want to verify the test cases of
tail calls.
Based on the above background and motivation, add the following
module parameter test_suite to the test_bpf.ko:
test_suite=<string>: only the specified test suite will be run, the
string can be "test_bpf", "test_tail_calls" or "test_skb_segment".
If test_suite is not specified, but test_id, test_name or test_range
is specified, set 'test_bpf' as the default test suite.
This is useful to only test the corresponding test suite when specify
the valid test_suite string.
Any invalid test suite will result in -EINVAL being returned and no
tests being run. If the test_suite is not specified or specified as
empty string, it does not change the current logic, all of the test
cases will be run.
Here are some test results:
# dmesg -c
# modprobe test_bpf
# dmesg
# dmesg | grep Summary
test_bpf: Summary: 1009 PASSED, 0 FAILED, [0/997 JIT'ed]
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [0/8 JIT'ed]
test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED
# rmmod test_bpf
# dmesg -c
# modprobe test_bpf test_suite=test_bpf
# dmesg | tail -1
test_bpf: Summary: 1009 PASSED, 0 FAILED, [0/997 JIT'ed]
# rmmod test_bpf
# dmesg -c
# modprobe test_bpf test_suite=test_tail_calls
# dmesg
test_bpf: #0 Tail call leaf jited:0 21 PASS
[...]
test_bpf: #7 Tail call error path, index out of range jited:0 32 PASS
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [0/8 JIT'ed]
# rmmod test_bpf
# dmesg -c
# modprobe test_bpf test_suite=test_skb_segment
# dmesg
test_bpf: #0 gso_with_rx_frags PASS
test_bpf: #1 gso_linear_no_head_frag PASS
test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED
# rmmod test_bpf
# dmesg -c
# modprobe test_bpf test_id=1
# dmesg
test_bpf: test_bpf: set 'test_bpf' as the default test_suite.
test_bpf: #1 TXA jited:0 54 51 50 PASS
test_bpf: Summary: 1 PASSED, 0 FAILED, [0/1 JIT'ed]
# rmmod test_bpf
# dmesg -c
# modprobe test_bpf test_suite=test_bpf test_name=TXA
# dmesg
test_bpf: #1 TXA jited:0 54 50 51 PASS
test_bpf: Summary: 1 PASSED, 0 FAILED, [0/1 JIT'ed]
# rmmod test_bpf
# dmesg -c
# modprobe test_bpf test_suite=test_tail_calls test_range=6,7
# dmesg
test_bpf: #6 Tail call error path, NULL target jited:0 41 PASS
test_bpf: #7 Tail call error path, index out of range jited:0 32 PASS
test_bpf: test_tail_calls: Summary: 2 PASSED, 0 FAILED, [0/2 JIT'ed]
# rmmod test_bpf
# dmesg -c
# modprobe test_bpf test_suite=test_skb_segment test_id=1
# dmesg
test_bpf: #1 gso_linear_no_head_frag PASS
test_bpf: test_skb_segment: Summary: 1 PASSED, 0 FAILED
By the way, the above segment fault has been fixed in the latest bpf-next
tree.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
---
v4:
-- Fix the following checkpatch issues:
CHECK: Alignment should match open parenthesis
CHECK: Please don't use multiple blank lines
./scripts/checkpatch.pl --strict *.patch
total: 0 errors, 0 warnings, 0 checks, 299 lines checked
the default max-line-length is 100 in ./scripts/checkpatch.pl,
but it seems that the netdev/checkpatch is 80:
https://patchwork.hopto.org/static/nipa/559961/12545157/checkpatch/stdout
v3:
-- Use test_suite instead of test_type as module parameter
-- Make test_id, test_name and test_range selection applied to each test suite
v2:
-- Fix typo in the commit message
-- Use my private email to send
lib/test_bpf.c | 262 ++++++++++++++++++++++++++++++++++++++++-----------------
1 file changed, 186 insertions(+), 76 deletions(-)
diff --git a/lib/test_bpf.c b/lib/test_bpf.c
index e5b10fd..124204e 100644
--- a/lib/test_bpf.c
+++ b/lib/test_bpf.c
@@ -14316,72 +14316,9 @@ module_param_string(test_name, test_name, sizeof(test_name), 0);
static int test_id = -1;
module_param(test_id, int, 0);
-static int test_range[2] = { 0, ARRAY_SIZE(tests) - 1 };
+static int test_range[2] = { -1, -1 };
module_param_array(test_range, int, NULL, 0);
-static __init int find_test_index(const char *test_name)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(tests); i++) {
- if (!strcmp(tests[i].descr, test_name))
- return i;
- }
- return -1;
-}
-
-static __init int prepare_bpf_tests(void)
-{
- if (test_id >= 0) {
- /*
- * if a test_id was specified, use test_range to
- * cover only that test.
- */
- if (test_id >= ARRAY_SIZE(tests)) {
- pr_err("test_bpf: invalid test_id specified.\n");
- return -EINVAL;
- }
-
- test_range[0] = test_id;
- test_range[1] = test_id;
- } else if (*test_name) {
- /*
- * if a test_name was specified, find it and setup
- * test_range to cover only that test.
- */
- int idx = find_test_index(test_name);
-
- if (idx < 0) {
- pr_err("test_bpf: no test named '%s' found.\n",
- test_name);
- return -EINVAL;
- }
- test_range[0] = idx;
- test_range[1] = idx;
- } else {
- /*
- * check that the supplied test_range is valid.
- */
- if (test_range[0] >= ARRAY_SIZE(tests) ||
- test_range[1] >= ARRAY_SIZE(tests) ||
- test_range[0] < 0 || test_range[1] < 0) {
- pr_err("test_bpf: test_range is out of bound.\n");
- return -EINVAL;
- }
-
- if (test_range[1] < test_range[0]) {
- pr_err("test_bpf: test_range is ending before it starts.\n");
- return -EINVAL;
- }
- }
-
- return 0;
-}
-
-static __init void destroy_bpf_tests(void)
-{
-}
-
static bool exclude_test(int test_id)
{
return test_id < test_range[0] || test_id > test_range[1];
@@ -14553,6 +14490,10 @@ static __init int test_skb_segment(void)
for (i = 0; i < ARRAY_SIZE(skb_segment_tests); i++) {
const struct skb_segment_test *test = &skb_segment_tests[i];
+ cond_resched();
+ if (exclude_test(i))
+ continue;
+
pr_info("#%d %s ", i, test->descr);
if (test_skb_segment_single(test)) {
@@ -14934,6 +14875,8 @@ static __init int test_tail_calls(struct bpf_array *progs)
int ret;
cond_resched();
+ if (exclude_test(i))
+ continue;
pr_info("#%d %s ", i, test->descr);
if (!fp) {
@@ -14966,29 +14909,196 @@ static __init int test_tail_calls(struct bpf_array *progs)
return err_cnt ? -EINVAL : 0;
}
+static char test_suite[32];
+module_param_string(test_suite, test_suite, sizeof(test_suite), 0);
+
+static __init int find_test_index(const char *test_name)
+{
+ int i;
+
+ if (!strcmp(test_suite, "test_bpf")) {
+ for (i = 0; i < ARRAY_SIZE(tests); i++) {
+ if (!strcmp(tests[i].descr, test_name))
+ return i;
+ }
+ }
+
+ if (!strcmp(test_suite, "test_tail_calls")) {
+ for (i = 0; i < ARRAY_SIZE(tail_call_tests); i++) {
+ if (!strcmp(tail_call_tests[i].descr, test_name))
+ return i;
+ }
+ }
+
+ if (!strcmp(test_suite, "test_skb_segment")) {
+ for (i = 0; i < ARRAY_SIZE(skb_segment_tests); i++) {
+ if (!strcmp(skb_segment_tests[i].descr, test_name))
+ return i;
+ }
+ }
+
+ return -1;
+}
+
+static __init int prepare_bpf_tests(void)
+{
+ if (test_id >= 0) {
+ /*
+ * if a test_id was specified, use test_range to
+ * cover only that test.
+ */
+ if (!strcmp(test_suite, "test_bpf") &&
+ test_id >= ARRAY_SIZE(tests)) {
+ pr_err("test_bpf: invalid test_id specified for '%s' suite.\n",
+ test_suite);
+ return -EINVAL;
+ }
+
+ if (!strcmp(test_suite, "test_tail_calls") &&
+ test_id >= ARRAY_SIZE(tail_call_tests)) {
+ pr_err("test_bpf: invalid test_id specified for '%s' suite.\n",
+ test_suite);
+ return -EINVAL;
+ }
+
+ if (!strcmp(test_suite, "test_skb_segment") &&
+ test_id >= ARRAY_SIZE(skb_segment_tests)) {
+ pr_err("test_bpf: invalid test_id specified for '%s' suite.\n",
+ test_suite);
+ return -EINVAL;
+ }
+
+ test_range[0] = test_id;
+ test_range[1] = test_id;
+ } else if (*test_name) {
+ /*
+ * if a test_name was specified, find it and setup
+ * test_range to cover only that test.
+ */
+ int idx = find_test_index(test_name);
+
+ if (idx < 0) {
+ pr_err("test_bpf: no test named '%s' found for '%s' suite.\n",
+ test_name, test_suite);
+ return -EINVAL;
+ }
+ test_range[0] = idx;
+ test_range[1] = idx;
+ } else {
+ /*
+ * check that the supplied test_range is valid.
+ */
+ if (!strcmp(test_suite, "test_bpf")) {
+ if (test_range[0] >= ARRAY_SIZE(tests) ||
+ test_range[1] >= ARRAY_SIZE(tests) ||
+ test_range[0] < 0 || test_range[1] < 0) {
+ pr_err("test_bpf: test_range is out of bound for '%s' suite.\n",
+ test_suite);
+ return -EINVAL;
+ }
+ }
+
+ if (!strcmp(test_suite, "test_tail_calls")) {
+ if (test_range[0] >= ARRAY_SIZE(tail_call_tests) ||
+ test_range[1] >= ARRAY_SIZE(tail_call_tests) ||
+ test_range[0] < 0 || test_range[1] < 0) {
+ pr_err("test_bpf: test_range is out of bound for '%s' suite.\n",
+ test_suite);
+ return -EINVAL;
+ }
+ }
+
+ if (!strcmp(test_suite, "test_skb_segment")) {
+ if (test_range[0] >= ARRAY_SIZE(skb_segment_tests) ||
+ test_range[1] >= ARRAY_SIZE(skb_segment_tests) ||
+ test_range[0] < 0 || test_range[1] < 0) {
+ pr_err("test_bpf: test_range is out of bound for '%s' suite.\n",
+ test_suite);
+ return -EINVAL;
+ }
+ }
+
+ if (test_range[1] < test_range[0]) {
+ pr_err("test_bpf: test_range is ending before it starts.\n");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static __init void destroy_bpf_tests(void)
+{
+}
+
static int __init test_bpf_init(void)
{
struct bpf_array *progs = NULL;
int ret;
+ if (strlen(test_suite) &&
+ strcmp(test_suite, "test_bpf") &&
+ strcmp(test_suite, "test_tail_calls") &&
+ strcmp(test_suite, "test_skb_segment")) {
+ pr_err("test_bpf: invalid test_suite '%s' specified.\n", test_suite);
+ return -EINVAL;
+ }
+
+ /*
+ * if test_suite is not specified, but test_id, test_name or test_range
+ * is specified, set 'test_bpf' as the default test suite.
+ */
+ if (!strlen(test_suite) &&
+ (test_id != -1 || strlen(test_name) ||
+ (test_range[0] != -1 || test_range[1] != -1))) {
+ pr_info("test_bpf: set 'test_bpf' as the default test_suite.\n");
+ strcpy(test_suite, "test_bpf");
+ }
+
+ /* if test_range is not specified, set the limit of test_range */
+ if (test_range[0] == -1 && test_range[1] == -1) {
+ /* if test_suite is not specified, set the possible max upper limit */
+ if (!strlen(test_suite)) {
+ test_range[0] = 0;
+ test_range[1] = ARRAY_SIZE(tests) - 1;
+ /* otherwise, set the limit of each test_suite */
+ } else if (!strcmp(test_suite, "test_bpf")) {
+ test_range[0] = 0;
+ test_range[1] = ARRAY_SIZE(tests) - 1;
+ } else if (!strcmp(test_suite, "test_tail_calls")) {
+ test_range[0] = 0;
+ test_range[1] = ARRAY_SIZE(tail_call_tests) - 1;
+ } else if (!strcmp(test_suite, "test_skb_segment")) {
+ test_range[0] = 0;
+ test_range[1] = ARRAY_SIZE(skb_segment_tests) - 1;
+ }
+ }
+
ret = prepare_bpf_tests();
if (ret < 0)
return ret;
- ret = test_bpf();
- destroy_bpf_tests();
- if (ret)
- return ret;
+ if (!strlen(test_suite) || !strcmp(test_suite, "test_bpf")) {
+ ret = test_bpf();
+ destroy_bpf_tests();
+ if (ret)
+ return ret;
+ }
- ret = prepare_tail_call_tests(&progs);
- if (ret)
- return ret;
- ret = test_tail_calls(progs);
- destroy_tail_call_tests(progs);
- if (ret)
- return ret;
+ if (!strlen(test_suite) || !strcmp(test_suite, "test_tail_calls")) {
+ ret = prepare_tail_call_tests(&progs);
+ if (ret)
+ return ret;
+ ret = test_tail_calls(progs);
+ destroy_tail_call_tests(progs);
+ if (ret)
+ return ret;
+ }
- return test_skb_segment();
+ if (!strlen(test_suite) || !strcmp(test_suite, "test_skb_segment"))
+ return test_skb_segment();
+
+ return 0;
}
static void __exit test_bpf_exit(void)
--
2.1.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH bpf-next v4] test_bpf: Add module parameter test_suite
2021-10-09 1:50 [PATCH bpf-next v4] test_bpf: Add module parameter test_suite Tiezhu Yang
@ 2021-10-13 7:52 ` Johan Almbladh
0 siblings, 0 replies; 2+ messages in thread
From: Johan Almbladh @ 2021-10-13 7:52 UTC (permalink / raw)
To: Tiezhu Yang
Cc: Alexei Starovoitov, Daniel Borkmann, Andrii Nakryiko, Networking,
bpf, linux-kernel, Xuefeng Li, Martin KaFai Lau, Song Liu,
Yonghong Song, John Fastabend, KP Singh
On Sat, Oct 9, 2021 at 3:50 AM Tiezhu Yang <yangtiezhu@loongson.cn> wrote:
>
> After commit 9298e63eafea ("bpf/tests: Add exhaustive tests of ALU
> operand magnitudes"), when modprobe test_bpf.ko with jit on mips64,
> there exists segment fault due to the following reason:
>
> ALU64_MOV_X: all register value magnitudes jited:1
> Break instruction in kernel code[#1]
>
> It seems that the related jit implementations of some test cases
> in test_bpf() have problems. At this moment, I do not care about
> the segment fault while I just want to verify the test cases of
> tail calls.
>
> Based on the above background and motivation, add the following
> module parameter test_suite to the test_bpf.ko:
> test_suite=<string>: only the specified test suite will be run, the
> string can be "test_bpf", "test_tail_calls" or "test_skb_segment".
>
> If test_suite is not specified, but test_id, test_name or test_range
> is specified, set 'test_bpf' as the default test suite.
>
> This is useful to only test the corresponding test suite when specify
> the valid test_suite string.
>
> Any invalid test suite will result in -EINVAL being returned and no
> tests being run. If the test_suite is not specified or specified as
> empty string, it does not change the current logic, all of the test
> cases will be run.
>
> Here are some test results:
> # dmesg -c
> # modprobe test_bpf
> # dmesg
> # dmesg | grep Summary
> test_bpf: Summary: 1009 PASSED, 0 FAILED, [0/997 JIT'ed]
> test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [0/8 JIT'ed]
> test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED
>
> # rmmod test_bpf
> # dmesg -c
> # modprobe test_bpf test_suite=test_bpf
> # dmesg | tail -1
> test_bpf: Summary: 1009 PASSED, 0 FAILED, [0/997 JIT'ed]
>
> # rmmod test_bpf
> # dmesg -c
> # modprobe test_bpf test_suite=test_tail_calls
> # dmesg
> test_bpf: #0 Tail call leaf jited:0 21 PASS
> [...]
> test_bpf: #7 Tail call error path, index out of range jited:0 32 PASS
> test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [0/8 JIT'ed]
>
> # rmmod test_bpf
> # dmesg -c
> # modprobe test_bpf test_suite=test_skb_segment
> # dmesg
> test_bpf: #0 gso_with_rx_frags PASS
> test_bpf: #1 gso_linear_no_head_frag PASS
> test_bpf: test_skb_segment: Summary: 2 PASSED, 0 FAILED
>
> # rmmod test_bpf
> # dmesg -c
> # modprobe test_bpf test_id=1
> # dmesg
> test_bpf: test_bpf: set 'test_bpf' as the default test_suite.
> test_bpf: #1 TXA jited:0 54 51 50 PASS
> test_bpf: Summary: 1 PASSED, 0 FAILED, [0/1 JIT'ed]
>
> # rmmod test_bpf
> # dmesg -c
> # modprobe test_bpf test_suite=test_bpf test_name=TXA
> # dmesg
> test_bpf: #1 TXA jited:0 54 50 51 PASS
> test_bpf: Summary: 1 PASSED, 0 FAILED, [0/1 JIT'ed]
>
> # rmmod test_bpf
> # dmesg -c
> # modprobe test_bpf test_suite=test_tail_calls test_range=6,7
> # dmesg
> test_bpf: #6 Tail call error path, NULL target jited:0 41 PASS
> test_bpf: #7 Tail call error path, index out of range jited:0 32 PASS
> test_bpf: test_tail_calls: Summary: 2 PASSED, 0 FAILED, [0/2 JIT'ed]
>
> # rmmod test_bpf
> # dmesg -c
> # modprobe test_bpf test_suite=test_skb_segment test_id=1
> # dmesg
> test_bpf: #1 gso_linear_no_head_frag PASS
> test_bpf: test_skb_segment: Summary: 1 PASSED, 0 FAILED
>
> By the way, the above segment fault has been fixed in the latest bpf-next
> tree.
>
> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
> ---
>
> v4:
> -- Fix the following checkpatch issues:
> CHECK: Alignment should match open parenthesis
> CHECK: Please don't use multiple blank lines
>
> ./scripts/checkpatch.pl --strict *.patch
> total: 0 errors, 0 warnings, 0 checks, 299 lines checked
>
> the default max-line-length is 100 in ./scripts/checkpatch.pl,
> but it seems that the netdev/checkpatch is 80:
> https://patchwork.hopto.org/static/nipa/559961/12545157/checkpatch/stdout
>
> v3:
> -- Use test_suite instead of test_type as module parameter
> -- Make test_id, test_name and test_range selection applied to each test suite
>
> v2:
> -- Fix typo in the commit message
> -- Use my private email to send
>
Thanks! I would suggest a few edits to reduce the amount of code
duplication, see comments below. Then it will be less code and fewer
places to change if/when we add new test suites in the future.
> lib/test_bpf.c | 262 ++++++++++++++++++++++++++++++++++++++++-----------------
> 1 file changed, 186 insertions(+), 76 deletions(-)
>
> diff --git a/lib/test_bpf.c b/lib/test_bpf.c
> index e5b10fd..124204e 100644
> --- a/lib/test_bpf.c
> +++ b/lib/test_bpf.c
> @@ -14316,72 +14316,9 @@ module_param_string(test_name, test_name, sizeof(test_name), 0);
> static int test_id = -1;
> module_param(test_id, int, 0);
>
> -static int test_range[2] = { 0, ARRAY_SIZE(tests) - 1 };
> +static int test_range[2] = { -1, -1 };
test_range[] is a filter, so you can initialize it to {0, INT_MAX} to
cover all test cases by default. There is no need to trim it to the
actual range of each suite.
> module_param_array(test_range, int, NULL, 0);
>
> -static __init int find_test_index(const char *test_name)
> -{
> - int i;
> -
> - for (i = 0; i < ARRAY_SIZE(tests); i++) {
> - if (!strcmp(tests[i].descr, test_name))
> - return i;
> - }
> - return -1;
> -}
> -
> -static __init int prepare_bpf_tests(void)
> -{
> - if (test_id >= 0) {
> - /*
> - * if a test_id was specified, use test_range to
> - * cover only that test.
> - */
> - if (test_id >= ARRAY_SIZE(tests)) {
> - pr_err("test_bpf: invalid test_id specified.\n");
> - return -EINVAL;
> - }
> -
> - test_range[0] = test_id;
> - test_range[1] = test_id;
> - } else if (*test_name) {
> - /*
> - * if a test_name was specified, find it and setup
> - * test_range to cover only that test.
> - */
> - int idx = find_test_index(test_name);
> -
> - if (idx < 0) {
> - pr_err("test_bpf: no test named '%s' found.\n",
> - test_name);
> - return -EINVAL;
> - }
> - test_range[0] = idx;
> - test_range[1] = idx;
> - } else {
> - /*
> - * check that the supplied test_range is valid.
> - */
> - if (test_range[0] >= ARRAY_SIZE(tests) ||
> - test_range[1] >= ARRAY_SIZE(tests) ||
> - test_range[0] < 0 || test_range[1] < 0) {
> - pr_err("test_bpf: test_range is out of bound.\n");
> - return -EINVAL;
> - }
> -
> - if (test_range[1] < test_range[0]) {
> - pr_err("test_bpf: test_range is ending before it starts.\n");
> - return -EINVAL;
> - }
> - }
> -
> - return 0;
> -}
> -
> -static __init void destroy_bpf_tests(void)
> -{
> -}
> -
> static bool exclude_test(int test_id)
> {
> return test_id < test_range[0] || test_id > test_range[1];
> @@ -14553,6 +14490,10 @@ static __init int test_skb_segment(void)
> for (i = 0; i < ARRAY_SIZE(skb_segment_tests); i++) {
> const struct skb_segment_test *test = &skb_segment_tests[i];
>
> + cond_resched();
> + if (exclude_test(i))
> + continue;
> +
> pr_info("#%d %s ", i, test->descr);
>
> if (test_skb_segment_single(test)) {
> @@ -14934,6 +14875,8 @@ static __init int test_tail_calls(struct bpf_array *progs)
> int ret;
>
> cond_resched();
> + if (exclude_test(i))
> + continue;
>
> pr_info("#%d %s ", i, test->descr);
> if (!fp) {
> @@ -14966,29 +14909,196 @@ static __init int test_tail_calls(struct bpf_array *progs)
> return err_cnt ? -EINVAL : 0;
> }
>
> +static char test_suite[32];
> +module_param_string(test_suite, test_suite, sizeof(test_suite), 0);
> +
> +static __init int find_test_index(const char *test_name)
> +{
> + int i;
> +
> + if (!strcmp(test_suite, "test_bpf")) {
> + for (i = 0; i < ARRAY_SIZE(tests); i++) {
> + if (!strcmp(tests[i].descr, test_name))
> + return i;
> + }
> + }
> +
> + if (!strcmp(test_suite, "test_tail_calls")) {
> + for (i = 0; i < ARRAY_SIZE(tail_call_tests); i++) {
> + if (!strcmp(tail_call_tests[i].descr, test_name))
> + return i;
> + }
> + }
> +
> + if (!strcmp(test_suite, "test_skb_segment")) {
> + for (i = 0; i < ARRAY_SIZE(skb_segment_tests); i++) {
> + if (!strcmp(skb_segment_tests[i].descr, test_name))
> + return i;
> + }
> + }
> +
> + return -1;
> +}
> +
> +static __init int prepare_bpf_tests(void)
> +{
> + if (test_id >= 0) {
> + /*
> + * if a test_id was specified, use test_range to
> + * cover only that test.
> + */
> + if (!strcmp(test_suite, "test_bpf") &&
> + test_id >= ARRAY_SIZE(tests)) {
> + pr_err("test_bpf: invalid test_id specified for '%s' suite.\n",
> + test_suite);
> + return -EINVAL;
> + }
> +
> + if (!strcmp(test_suite, "test_tail_calls") &&
> + test_id >= ARRAY_SIZE(tail_call_tests)) {
> + pr_err("test_bpf: invalid test_id specified for '%s' suite.\n",
> + test_suite);
> + return -EINVAL;
> + }
> +
> + if (!strcmp(test_suite, "test_skb_segment") &&
> + test_id >= ARRAY_SIZE(skb_segment_tests)) {
> + pr_err("test_bpf: invalid test_id specified for '%s' suite.\n",
> + test_suite);
> + return -EINVAL;
> + }
> +
> + test_range[0] = test_id;
> + test_range[1] = test_id;
> + } else if (*test_name) {
> + /*
> + * if a test_name was specified, find it and setup
> + * test_range to cover only that test.
> + */
> + int idx = find_test_index(test_name);
> +
> + if (idx < 0) {
> + pr_err("test_bpf: no test named '%s' found for '%s' suite.\n",
> + test_name, test_suite);
> + return -EINVAL;
> + }
> + test_range[0] = idx;
> + test_range[1] = idx;
> + } else {
> + /*
> + * check that the supplied test_range is valid.
> + */
> + if (!strcmp(test_suite, "test_bpf")) {
> + if (test_range[0] >= ARRAY_SIZE(tests) ||
> + test_range[1] >= ARRAY_SIZE(tests) ||
> + test_range[0] < 0 || test_range[1] < 0) {
> + pr_err("test_bpf: test_range is out of bound for '%s' suite.\n",
> + test_suite);
> + return -EINVAL;
> + }
> + }
> +
> + if (!strcmp(test_suite, "test_tail_calls")) {
> + if (test_range[0] >= ARRAY_SIZE(tail_call_tests) ||
> + test_range[1] >= ARRAY_SIZE(tail_call_tests) ||
> + test_range[0] < 0 || test_range[1] < 0) {
> + pr_err("test_bpf: test_range is out of bound for '%s' suite.\n",
> + test_suite);
> + return -EINVAL;
> + }
> + }
> +
> + if (!strcmp(test_suite, "test_skb_segment")) {
> + if (test_range[0] >= ARRAY_SIZE(skb_segment_tests) ||
> + test_range[1] >= ARRAY_SIZE(skb_segment_tests) ||
> + test_range[0] < 0 || test_range[1] < 0) {
> + pr_err("test_bpf: test_range is out of bound for '%s' suite.\n",
> + test_suite);
> + return -EINVAL;
> + }
> + }
> +
> + if (test_range[1] < test_range[0]) {
> + pr_err("test_bpf: test_range is ending before it starts.\n");
> + return -EINVAL;
> + }
> + }
> +
> + return 0;
> +}
I would suggest that you compute the valid range first, depending on
the value of test_suite. Then you don't have to duplicate the
constraint checks for each suite name.
> +
> +static __init void destroy_bpf_tests(void)
> +{
> +}
> +
> static int __init test_bpf_init(void)
> {
> struct bpf_array *progs = NULL;
> int ret;
>
> + if (strlen(test_suite) &&
> + strcmp(test_suite, "test_bpf") &&
> + strcmp(test_suite, "test_tail_calls") &&
> + strcmp(test_suite, "test_skb_segment")) {
> + pr_err("test_bpf: invalid test_suite '%s' specified.\n", test_suite);
> + return -EINVAL;
> + }
> +
> + /*
> + * if test_suite is not specified, but test_id, test_name or test_range
> + * is specified, set 'test_bpf' as the default test suite.
> + */
> + if (!strlen(test_suite) &&
> + (test_id != -1 || strlen(test_name) ||
> + (test_range[0] != -1 || test_range[1] != -1))) {
If you initialize test_range[] as suggested, the range condition here
will need to be updated.
> + pr_info("test_bpf: set 'test_bpf' as the default test_suite.\n");
> + strcpy(test_suite, "test_bpf");
> + }
> +
> + /* if test_range is not specified, set the limit of test_range */
> + if (test_range[0] == -1 && test_range[1] == -1) {
> + /* if test_suite is not specified, set the possible max upper limit */
> + if (!strlen(test_suite)) {
> + test_range[0] = 0;
> + test_range[1] = ARRAY_SIZE(tests) - 1;
> + /* otherwise, set the limit of each test_suite */
> + } else if (!strcmp(test_suite, "test_bpf")) {
> + test_range[0] = 0;
> + test_range[1] = ARRAY_SIZE(tests) - 1;
> + } else if (!strcmp(test_suite, "test_tail_calls")) {
> + test_range[0] = 0;
> + test_range[1] = ARRAY_SIZE(tail_call_tests) - 1;
> + } else if (!strcmp(test_suite, "test_skb_segment")) {
> + test_range[0] = 0;
> + test_range[1] = ARRAY_SIZE(skb_segment_tests) - 1;
> + }
> + }
if you initialize test_range as suggested, the block above is not needed.
> +
> ret = prepare_bpf_tests();
> if (ret < 0)
> return ret;
>
> - ret = test_bpf();
> - destroy_bpf_tests();
> - if (ret)
> - return ret;
> + if (!strlen(test_suite) || !strcmp(test_suite, "test_bpf")) {
> + ret = test_bpf();
> + destroy_bpf_tests();
> + if (ret)
> + return ret;
> + }
>
> - ret = prepare_tail_call_tests(&progs);
> - if (ret)
> - return ret;
> - ret = test_tail_calls(progs);
> - destroy_tail_call_tests(progs);
> - if (ret)
> - return ret;
> + if (!strlen(test_suite) || !strcmp(test_suite, "test_tail_calls")) {
> + ret = prepare_tail_call_tests(&progs);
> + if (ret)
> + return ret;
> + ret = test_tail_calls(progs);
> + destroy_tail_call_tests(progs);
> + if (ret)
> + return ret;
> + }
>
> - return test_skb_segment();
> + if (!strlen(test_suite) || !strcmp(test_suite, "test_skb_segment"))
> + return test_skb_segment();
> +
> + return 0;
> }
>
> static void __exit test_bpf_exit(void)
> --
> 2.1.0
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-10-13 7:53 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-10-09 1:50 [PATCH bpf-next v4] test_bpf: Add module parameter test_suite Tiezhu Yang
2021-10-13 7:52 ` Johan Almbladh
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).