From: Masami Hiramatsu <mhiramat@kernel.org>
To: Jiri Olsa <jolsa@redhat.com>, Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>,
Andrii Nakryiko <andrii@kernel.org>,
Masami Hiramatsu <mhiramat@kernel.org>,
netdev@vger.kernel.org, bpf@vger.kernel.org,
lkml <linux-kernel@vger.kernel.org>,
Martin KaFai Lau <kafai@fb.com>, Song Liu <songliubraving@fb.com>,
Yonghong Song <yhs@fb.com>,
John Fastabend <john.fastabend@gmail.com>,
KP Singh <kpsingh@chromium.org>,
Steven Rostedt <rostedt@goodmis.org>,
"Naveen N . Rao" <naveen.n.rao@linux.ibm.com>,
Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>,
"David S . Miller" <davem@davemloft.net>
Subject: [PATCH v8 11/11] fprobe: Add a selftest for fprobe
Date: Fri, 11 Feb 2022 20:56:11 +0900 [thread overview]
Message-ID: <164458057084.586276.17748870220459914222.stgit@devnote2> (raw)
In-Reply-To: <164458044634.586276.3261555265565111183.stgit@devnote2>
Add a KUnit based selftest for fprobe interface.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
---
lib/Kconfig.debug | 12 +++++
lib/Makefile | 2 +
lib/test_fprobe.c | 125 +++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 139 insertions(+)
create mode 100644 lib/test_fprobe.c
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 14b89aa37c5c..1506e47b521c 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -2100,6 +2100,18 @@ config KPROBES_SANITY_TEST
Say N if you are unsure.
+config FPROBE_SANITY_TEST
+ tristate "Self test for fprobe"
+ depends on DEBUG_KERNEL
+ depends on FPROBE
+ depends on KUNIT
+ help
+ This option will enable testing the fprobe when the system boot.
+ A series of tests are made to verify that the fprobe is functioning
+ properly.
+
+ Say N if you are unsure.
+
config BACKTRACE_SELF_TEST
tristate "Self test for the backtrace code"
depends on DEBUG_KERNEL
diff --git a/lib/Makefile b/lib/Makefile
index 300f569c626b..154008764b16 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -103,6 +103,8 @@ obj-$(CONFIG_TEST_HMM) += test_hmm.o
obj-$(CONFIG_TEST_FREE_PAGES) += test_free_pages.o
obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o
obj-$(CONFIG_TEST_REF_TRACKER) += test_ref_tracker.o
+CFLAGS_test_fprobe.o += $(CC_FLAGS_FTRACE)
+obj-$(CONFIG_FPROBE_SANITY_TEST) += test_fprobe.o
#
# CFLAGS for compiling floating point code inside the kernel. x86/Makefile turns
# off the generation of FPU/SSE* instructions for kernel proper but FPU_FLAGS
diff --git a/lib/test_fprobe.c b/lib/test_fprobe.c
new file mode 100644
index 000000000000..8b98f1ed7863
--- /dev/null
+++ b/lib/test_fprobe.c
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * test_fprobe.c - simple sanity test for fprobe
+ */
+
+#include <linux/kernel.h>
+#include <linux/fprobe.h>
+#include <linux/random.h>
+#include <kunit/test.h>
+
+#define div_factor 3
+
+static struct kunit *current_test;
+
+static u32 rand1, entry_val, exit_val;
+
+/* Use indirect calls to avoid inlining the target functions */
+static u32 (*target)(u32 value);
+static u32 (*target2)(u32 value);
+
+static noinline u32 fprobe_target(u32 value)
+{
+ return (value / div_factor);
+}
+
+static noinline u32 fprobe_target2(u32 value)
+{
+ return (value / div_factor) + 1;
+}
+
+static notrace void fp_entry_handler(struct fprobe *fp, unsigned long ip, struct pt_regs *regs)
+{
+ KUNIT_EXPECT_FALSE(current_test, preemptible());
+ /* This can be called on the fprobe_target and the fprobe_target2 */
+ if (ip != (unsigned long)fprobe_target)
+ KUNIT_EXPECT_EQ(current_test, ip, (unsigned long)fprobe_target2);
+ entry_val = (rand1 / div_factor);
+}
+
+static notrace void fp_exit_handler(struct fprobe *fp, unsigned long ip, struct pt_regs *regs)
+{
+ unsigned long ret = regs_return_value(regs);
+
+ KUNIT_EXPECT_FALSE(current_test, preemptible());
+ if (ip != (unsigned long)fprobe_target) {
+ KUNIT_EXPECT_EQ(current_test, ip, (unsigned long)fprobe_target2);
+ KUNIT_EXPECT_EQ(current_test, ret, (rand1 / div_factor) + 1);
+ } else
+ KUNIT_EXPECT_EQ(current_test, ret, (rand1 / div_factor));
+ KUNIT_EXPECT_EQ(current_test, entry_val, (rand1 / div_factor));
+ exit_val = entry_val + div_factor;
+}
+
+static struct fprobe fp = {
+ .entry_handler = fp_entry_handler,
+ .exit_handler = fp_exit_handler,
+};
+
+static void test_fprobe(struct kunit *test)
+{
+ current_test = test;
+ KUNIT_EXPECT_EQ(test, 0, register_fprobe(&fp, "fprobe_target*", NULL));
+
+ entry_val = 0;
+ exit_val = 0;
+ target(rand1);
+ KUNIT_EXPECT_NE(test, 0, entry_val);
+ KUNIT_EXPECT_EQ(test, entry_val + div_factor, exit_val);
+
+ entry_val = 0;
+ exit_val = 0;
+ target2(rand1);
+ KUNIT_EXPECT_NE(test, 0, entry_val);
+ KUNIT_EXPECT_EQ(test, entry_val + div_factor, exit_val);
+
+ KUNIT_EXPECT_EQ(test, 0, unregister_fprobe(&fp));
+}
+
+static void test_fprobe_syms(struct kunit *test)
+{
+ const char *syms[] = {"fprobe_target", "fprobe_target2"};
+
+ current_test = test;
+ KUNIT_EXPECT_EQ(test, 0, register_fprobe_syms(&fp, syms, 2));
+
+ entry_val = 0;
+ exit_val = 0;
+ target(rand1);
+ KUNIT_EXPECT_NE(test, 0, entry_val);
+ KUNIT_EXPECT_EQ(test, entry_val + div_factor, exit_val);
+
+ entry_val = 0;
+ exit_val = 0;
+ target2(rand1);
+ KUNIT_EXPECT_NE(test, 0, entry_val);
+ KUNIT_EXPECT_EQ(test, entry_val + div_factor, exit_val);
+
+ KUNIT_EXPECT_EQ(test, 0, unregister_fprobe(&fp));
+}
+
+static int fprobe_test_init(struct kunit *test)
+{
+ do {
+ rand1 = prandom_u32();
+ } while (rand1 <= div_factor);
+ target = fprobe_target;
+ target2 = fprobe_target2;
+ return 0;
+}
+
+static struct kunit_case fprobe_testcases[] = {
+ KUNIT_CASE(test_fprobe),
+ KUNIT_CASE(test_fprobe_syms),
+ {}
+};
+
+static struct kunit_suite fprobe_test_suite = {
+ .name = "fprobe_test",
+ .init = fprobe_test_init,
+ .test_cases = fprobe_testcases,
+};
+
+kunit_test_suites(&fprobe_test_suite);
+
+MODULE_LICENSE("GPL");
prev parent reply other threads:[~2022-02-11 11:56 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-11 11:54 [PATCH v8 00/11] fprobe: Introduce fprobe function entry/exit probe Masami Hiramatsu
2022-02-11 11:54 ` [PATCH v8 01/11] ftrace: Add ftrace_set_filter_ips function Masami Hiramatsu
2022-02-11 11:54 ` [PATCH v8 02/11] fprobe: Add ftrace based probe APIs Masami Hiramatsu
2022-02-11 11:54 ` [PATCH v8 03/11] rethook: Add a generic return hook Masami Hiramatsu
2022-02-11 11:54 ` [PATCH v8 04/11] rethook: x86: Add rethook x86 implementation Masami Hiramatsu
2022-02-11 11:55 ` [PATCH v8 05/11] ARM: rethook: Add rethook arm implementation Masami Hiramatsu
2022-02-11 11:55 ` [PATCH v8 06/11] arm64: rethook: Add arm64 rethook implementation Masami Hiramatsu
2022-02-11 11:55 ` [PATCH v8 07/11] fprobe: Add exit_handler support Masami Hiramatsu
2022-02-11 11:55 ` [PATCH v8 08/11] fprobe: Add sample program for fprobe Masami Hiramatsu
2022-02-11 11:55 ` [PATCH v8 09/11] fprobe: Introduce FPROBE_FL_KPROBE_SHARED flag " Masami Hiramatsu
2022-02-11 11:55 ` [PATCH v8 10/11] docs: fprobe: Add fprobe description to ftrace-use.rst Masami Hiramatsu
2022-02-11 11:56 ` Masami Hiramatsu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=164458057084.586276.17748870220459914222.stgit@devnote2 \
--to=mhiramat@kernel.org \
--cc=andrii@kernel.org \
--cc=anil.s.keshavamurthy@intel.com \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=john.fastabend@gmail.com \
--cc=jolsa@redhat.com \
--cc=kafai@fb.com \
--cc=kpsingh@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=naveen.n.rao@linux.ibm.com \
--cc=netdev@vger.kernel.org \
--cc=rostedt@goodmis.org \
--cc=songliubraving@fb.com \
--cc=yhs@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).