From: Andrey Ignatov <rdna@fb.com>
To: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>,
Alexei Starovoitov <ast@kernel.org>,
"bpf@vger.kernel.org" <bpf@vger.kernel.org>,
Heiko Carstens <heiko.carstens@de.ibm.com>,
Vasily Gorbik <gor@linux.ibm.com>
Subject: Re: [PATCH bpf] bpf: fix accessing bpf_sysctl.file_pos on s390
Date: Thu, 15 Aug 2019 19:58:58 +0000 [thread overview]
Message-ID: <20190815195856.GA45122@rdna-mbp> (raw)
In-Reply-To: <20190815112044.38420-1-iii@linux.ibm.com>
Ilya Leoshkevich <iii@linux.ibm.com> [Thu, 2019-08-15 11:20 -0700]:
> "ctx:file_pos sysctl:read write ok" fails on s390 with "Read value !=
> nux". This is because verifier rewrites a complete 32-bit
> bpf_sysctl.file_pos update to a partial update of the first 32 bits of
> 64-bit *bpf_sysctl_kern.ppos, which is not correct on big-endian
> systems.
>
> Fix by using an offset on big-endian systems.
>
> Ditto for bpf_sysctl.file_pos reads. Currently the test does not detect
> a problem there, since it expects to see 0, which it gets with high
> probability in error cases, so change it to seek to offset 3 and expect
> 3 in bpf_sysctl.file_pos.
>
> Fixes: e1550bfe0de4 ("bpf: Add file_pos field to bpf_sysctl ctx")
> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Right, I missed this. Thanks for fixing!
Acked-by: Andrey Ignatov <rdna@fb.com>
> ---
> include/linux/filter.h | 10 ++++++++++
> kernel/bpf/cgroup.c | 9 +++++++--
> tools/testing/selftests/bpf/test_sysctl.c | 9 ++++++++-
> 3 files changed, 25 insertions(+), 3 deletions(-)
>
> diff --git a/include/linux/filter.h b/include/linux/filter.h
> index 92c6e31fb008..94e81c56d81c 100644
> --- a/include/linux/filter.h
> +++ b/include/linux/filter.h
> @@ -760,6 +760,16 @@ bpf_ctx_narrow_load_shift(u32 off, u32 size, u32 size_default)
> #endif
> }
>
> +static inline s16
> +bpf_ctx_narrow_access_offset(size_t variable_size, size_t access_size)
> +{
> +#ifdef __LITTLE_ENDIAN
> + return 0;
> +#else
> + return variable_size - access_size;
> +#endif
> +}
> +
> #define bpf_ctx_wide_access_ok(off, size, type, field) \
> (size == sizeof(__u64) && \
> off >= offsetof(type, field) && \
> diff --git a/kernel/bpf/cgroup.c b/kernel/bpf/cgroup.c
> index 0a00eaca6fae..b835fbb13ea8 100644
> --- a/kernel/bpf/cgroup.c
> +++ b/kernel/bpf/cgroup.c
> @@ -1356,7 +1356,9 @@ static u32 sysctl_convert_ctx_access(enum bpf_access_type type,
> treg, si->dst_reg,
> offsetof(struct bpf_sysctl_kern, ppos));
> *insn++ = BPF_STX_MEM(
> - BPF_SIZEOF(u32), treg, si->src_reg, 0);
> + BPF_SIZEOF(u32), treg, si->src_reg,
> + bpf_ctx_narrow_access_offset(
> + sizeof(loff_t), sizeof(u32)));
> *insn++ = BPF_LDX_MEM(
> BPF_DW, treg, si->dst_reg,
> offsetof(struct bpf_sysctl_kern, tmp_reg));
> @@ -1366,7 +1368,10 @@ static u32 sysctl_convert_ctx_access(enum bpf_access_type type,
> si->dst_reg, si->src_reg,
> offsetof(struct bpf_sysctl_kern, ppos));
> *insn++ = BPF_LDX_MEM(
> - BPF_SIZE(si->code), si->dst_reg, si->dst_reg, 0);
> + BPF_SIZE(si->code), si->dst_reg, si->dst_reg,
> + bpf_ctx_narrow_access_offset(
> + sizeof(loff_t),
> + bpf_size_to_bytes(BPF_SIZE(si->code))));
> }
> *target_size = sizeof(u32);
> break;
> diff --git a/tools/testing/selftests/bpf/test_sysctl.c b/tools/testing/selftests/bpf/test_sysctl.c
> index a3bebd7c68dd..abc26248a7f1 100644
> --- a/tools/testing/selftests/bpf/test_sysctl.c
> +++ b/tools/testing/selftests/bpf/test_sysctl.c
> @@ -31,6 +31,7 @@ struct sysctl_test {
> enum bpf_attach_type attach_type;
> const char *sysctl;
> int open_flags;
> + int seek;
> const char *newval;
> const char *oldval;
> enum {
> @@ -139,7 +140,7 @@ static struct sysctl_test tests[] = {
> /* If (file_pos == X) */
> BPF_LDX_MEM(BPF_W, BPF_REG_7, BPF_REG_1,
> offsetof(struct bpf_sysctl, file_pos)),
> - BPF_JMP_IMM(BPF_JNE, BPF_REG_7, 0, 2),
> + BPF_JMP_IMM(BPF_JNE, BPF_REG_7, 3, 2),
>
> /* return ALLOW; */
> BPF_MOV64_IMM(BPF_REG_0, 1),
> @@ -152,6 +153,7 @@ static struct sysctl_test tests[] = {
> .attach_type = BPF_CGROUP_SYSCTL,
> .sysctl = "kernel/ostype",
> .open_flags = O_RDONLY,
> + .seek = 3,
> .result = SUCCESS,
> },
> {
> @@ -1442,6 +1444,11 @@ static int access_sysctl(const char *sysctl_path,
> if (fd < 0)
> return fd;
>
> + if (test->seek && lseek(fd, test->seek, SEEK_SET) == -1) {
> + log_err("lseek(%d) failed", test->seek);
> + goto err;
> + }
> +
> if (test->open_flags == O_RDONLY) {
> char buf[128];
>
--
Andrey Ignatov
next prev parent reply other threads:[~2019-08-15 19:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-15 11:20 [PATCH bpf] bpf: fix accessing bpf_sysctl.file_pos on s390 Ilya Leoshkevich
2019-08-15 19:58 ` Andrey Ignatov [this message]
2019-08-15 23:01 ` Yonghong Song
2019-08-16 10:34 ` Ilya Leoshkevich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190815195856.GA45122@rdna-mbp \
--to=rdna@fb.com \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=gor@linux.ibm.com \
--cc=heiko.carstens@de.ibm.com \
--cc=iii@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).