From: Jakub Sitnicki <jakub@cloudflare.com>
To: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org, kernel-team@cloudflare.com,
Stanislav Fomichev <sdf@google.com>,
Martin KaFai Lau <kafai@fb.com>
Subject: [PATCH bpf-next v3 2/2] selftests/bpf: Check that flow dissector can be re-attached
Date: Fri, 11 Oct 2019 10:29:46 +0200 [thread overview]
Message-ID: <20191011082946.22695-3-jakub@cloudflare.com> (raw)
In-Reply-To: <20191011082946.22695-1-jakub@cloudflare.com>
Make sure a new flow dissector program can be attached to replace the old
one with a single syscall. Also check that attaching the same program twice
is prohibited.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
---
.../bpf/prog_tests/flow_dissector_reattach.c | 127 ++++++++++++++++++
1 file changed, 127 insertions(+)
create mode 100644 tools/testing/selftests/bpf/prog_tests/flow_dissector_reattach.c
diff --git a/tools/testing/selftests/bpf/prog_tests/flow_dissector_reattach.c b/tools/testing/selftests/bpf/prog_tests/flow_dissector_reattach.c
new file mode 100644
index 000000000000..777faffc4639
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/flow_dissector_reattach.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Test that the flow_dissector program can be updated with a single
+ * syscall by attaching a new program that replaces the existing one.
+ *
+ * Corner case - the same program cannot be attached twice.
+ */
+
+#define _GNU_SOURCE
+#include <errno.h>
+#include <fcntl.h>
+#include <sched.h>
+#include <stdbool.h>
+#include <unistd.h>
+
+#include <linux/bpf.h>
+#include <bpf/bpf.h>
+
+#include "test_progs.h"
+
+static bool is_attached(int netns)
+{
+ __u32 cnt;
+ int err;
+
+ err = bpf_prog_query(netns, BPF_FLOW_DISSECTOR, 0, NULL, NULL, &cnt);
+ if (CHECK_FAIL(err)) {
+ perror("bpf_prog_query");
+ return true; /* fail-safe */
+ }
+
+ return cnt > 0;
+}
+
+static int load_prog(void)
+{
+ struct bpf_insn prog[] = {
+ BPF_MOV64_IMM(BPF_REG_0, BPF_OK),
+ BPF_EXIT_INSN(),
+ };
+ int fd;
+
+ fd = bpf_load_program(BPF_PROG_TYPE_FLOW_DISSECTOR, prog,
+ ARRAY_SIZE(prog), "GPL", 0, NULL, 0);
+ if (CHECK_FAIL(fd < 0))
+ perror("bpf_load_program");
+
+ return fd;
+}
+
+static void do_flow_dissector_reattach(void)
+{
+ int prog_fd[2] = { -1, -1 };
+ int err;
+
+ prog_fd[0] = load_prog();
+ if (prog_fd[0] < 0)
+ return;
+
+ prog_fd[1] = load_prog();
+ if (prog_fd[1] < 0)
+ goto out_close;
+
+ err = bpf_prog_attach(prog_fd[0], 0, BPF_FLOW_DISSECTOR, 0);
+ if (CHECK_FAIL(err)) {
+ perror("bpf_prog_attach-0");
+ goto out_close;
+ }
+
+ /* Expect success when attaching a different program */
+ err = bpf_prog_attach(prog_fd[1], 0, BPF_FLOW_DISSECTOR, 0);
+ if (CHECK_FAIL(err)) {
+ perror("bpf_prog_attach-1");
+ goto out_detach;
+ }
+
+ /* Expect failure when attaching the same program twice */
+ err = bpf_prog_attach(prog_fd[1], 0, BPF_FLOW_DISSECTOR, 0);
+ if (CHECK_FAIL(!err || errno != EINVAL))
+ perror("bpf_prog_attach-2");
+
+out_detach:
+ err = bpf_prog_detach(0, BPF_FLOW_DISSECTOR);
+ if (CHECK_FAIL(err))
+ perror("bpf_prog_detach");
+
+out_close:
+ close(prog_fd[1]);
+ close(prog_fd[0]);
+}
+
+void test_flow_dissector_reattach(void)
+{
+ int init_net, err;
+
+ init_net = open("/proc/1/ns/net", O_RDONLY);
+ if (CHECK_FAIL(init_net < 0)) {
+ perror("open(/proc/1/ns/net)");
+ return;
+ }
+
+ err = setns(init_net, CLONE_NEWNET);
+ if (CHECK_FAIL(err)) {
+ perror("setns(/proc/1/ns/net)");
+ goto out_close;
+ }
+
+ if (is_attached(init_net)) {
+ test__skip();
+ printf("Can't test with flow dissector attached to init_net\n");
+ return;
+ }
+
+ /* First run tests in root network namespace */
+ do_flow_dissector_reattach();
+
+ /* Then repeat tests in a non-root namespace */
+ err = unshare(CLONE_NEWNET);
+ if (CHECK_FAIL(err)) {
+ perror("unshare(CLONE_NEWNET)");
+ goto out_close;
+ }
+ do_flow_dissector_reattach();
+
+out_close:
+ close(init_net);
+}
--
2.20.1
next prev parent reply other threads:[~2019-10-11 8:29 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-11 8:29 [PATCH bpf-next v3 0/2] Atomic flow dissector updates Jakub Sitnicki
2019-10-11 8:29 ` [PATCH bpf-next v3 1/2] flow_dissector: Allow updating the flow dissector program atomically Jakub Sitnicki
2019-10-11 8:29 ` Jakub Sitnicki [this message]
2019-10-11 21:24 ` [PATCH bpf-next v3 0/2] Atomic flow dissector updates Daniel Borkmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191011082946.22695-3-jakub@cloudflare.com \
--to=jakub@cloudflare.com \
--cc=bpf@vger.kernel.org \
--cc=kafai@fb.com \
--cc=kernel-team@cloudflare.com \
--cc=netdev@vger.kernel.org \
--cc=sdf@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).