bpf.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yuya Kusakabe <yuya.kusakabe@gmail.com>
To: jasowang@redhat.com
Cc: andriin@fb.com, ast@kernel.org, bpf@vger.kernel.org,
	daniel@iogearbox.net, davem@davemloft.net, hawk@kernel.org,
	john.fastabend@gmail.com, kafai@fb.com, kuba@kernel.org,
	linux-kernel@vger.kernel.org, mst@redhat.com,
	netdev@vger.kernel.org, songliubraving@fb.com, yhs@fb.com,
	yuya.kusakabe@gmail.com
Subject: [PATCH bpf-next v6 2/2] virtio_net: add XDP meta data support
Date: Tue, 25 Feb 2020 12:32:12 +0900	[thread overview]
Message-ID: <20200225033212.437563-2-yuya.kusakabe@gmail.com> (raw)
In-Reply-To: <20200225033212.437563-1-yuya.kusakabe@gmail.com>

Implement support for transferring XDP meta data into skb for
virtio_net driver; before calling into the program, xdp.data_meta points
to xdp.data, where on program return with pass verdict, we call
into skb_metadata_set().

Tested with the script at
https://github.com/higebu/virtio_net-xdp-metadata-test.

Signed-off-by: Yuya Kusakabe <yuya.kusakabe@gmail.com>
---
 drivers/net/virtio_net.c | 52 ++++++++++++++++++++++++----------------
 1 file changed, 32 insertions(+), 20 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index f39d0218bdaa..12d115ef5e74 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -371,7 +371,7 @@ static struct sk_buff *page_to_skb(struct virtnet_info *vi,
 				   struct receive_queue *rq,
 				   struct page *page, unsigned int offset,
 				   unsigned int len, unsigned int truesize,
-				   bool hdr_valid)
+				   bool hdr_valid, unsigned int metasize)
 {
 	struct sk_buff *skb;
 	struct virtio_net_hdr_mrg_rxbuf *hdr;
@@ -393,6 +393,7 @@ static struct sk_buff *page_to_skb(struct virtnet_info *vi,
 	else
 		hdr_padded_len = sizeof(struct padded_vnet_hdr);
 
+	/* hdr_valid means no XDP, so we can copy the vnet header */
 	if (hdr_valid)
 		memcpy(hdr, p, hdr_len);
 
@@ -405,6 +406,11 @@ static struct sk_buff *page_to_skb(struct virtnet_info *vi,
 		copy = skb_tailroom(skb);
 	skb_put_data(skb, p, copy);
 
+	if (metasize) {
+		__skb_pull(skb, metasize);
+		skb_metadata_set(skb, metasize);
+	}
+
 	len -= copy;
 	offset += copy;
 
@@ -450,10 +456,6 @@ static int __virtnet_xdp_xmit_one(struct virtnet_info *vi,
 	struct virtio_net_hdr_mrg_rxbuf *hdr;
 	int err;
 
-	/* virtqueue want to use data area in-front of packet */
-	if (unlikely(xdpf->metasize > 0))
-		return -EOPNOTSUPP;
-
 	if (unlikely(xdpf->headroom < vi->hdr_len))
 		return -EOVERFLOW;
 
@@ -644,6 +646,7 @@ static struct sk_buff *receive_small(struct net_device *dev,
 	unsigned int delta = 0;
 	struct page *xdp_page;
 	int err;
+	unsigned int metasize = 0;
 
 	len -= vi->hdr_len;
 	stats->bytes += len;
@@ -683,8 +686,8 @@ static struct sk_buff *receive_small(struct net_device *dev,
 
 		xdp.data_hard_start = buf + VIRTNET_RX_PAD + vi->hdr_len;
 		xdp.data = xdp.data_hard_start + xdp_headroom;
-		xdp_set_data_meta_invalid(&xdp);
 		xdp.data_end = xdp.data + len;
+		xdp.data_meta = xdp.data;
 		xdp.rxq = &rq->xdp_rxq;
 		orig_data = xdp.data;
 		act = bpf_prog_run_xdp(xdp_prog, &xdp);
@@ -695,6 +698,7 @@ static struct sk_buff *receive_small(struct net_device *dev,
 			/* Recalculate length in case bpf program changed it */
 			delta = orig_data - xdp.data;
 			len = xdp.data_end - xdp.data;
+			metasize = xdp.data - xdp.data_meta;
 			break;
 		case XDP_TX:
 			stats->xdp_tx++;
@@ -740,6 +744,9 @@ static struct sk_buff *receive_small(struct net_device *dev,
 		memcpy(skb_vnet_hdr(skb), buf, vi->hdr_len);
 	} /* keep zeroed vnet hdr since XDP is loaded */
 
+	if (metasize)
+		skb_metadata_set(skb, metasize);
+
 err:
 	return skb;
 
@@ -760,8 +767,8 @@ static struct sk_buff *receive_big(struct net_device *dev,
 				   struct virtnet_rq_stats *stats)
 {
 	struct page *page = buf;
-	struct sk_buff *skb = page_to_skb(vi, rq, page, 0, len,
-					  PAGE_SIZE, true);
+	struct sk_buff *skb =
+		page_to_skb(vi, rq, page, 0, len, PAGE_SIZE, true, 0);
 
 	stats->bytes += len - vi->hdr_len;
 	if (unlikely(!skb))
@@ -793,6 +800,7 @@ static struct sk_buff *receive_mergeable(struct net_device *dev,
 	unsigned int truesize;
 	unsigned int headroom = mergeable_ctx_to_headroom(ctx);
 	int err;
+	unsigned int metasize = 0;
 
 	head_skb = NULL;
 	stats->bytes += len - vi->hdr_len;
@@ -839,8 +847,8 @@ static struct sk_buff *receive_mergeable(struct net_device *dev,
 		data = page_address(xdp_page) + offset;
 		xdp.data_hard_start = data - VIRTIO_XDP_HEADROOM + vi->hdr_len;
 		xdp.data = data + vi->hdr_len;
-		xdp_set_data_meta_invalid(&xdp);
 		xdp.data_end = xdp.data + (len - vi->hdr_len);
+		xdp.data_meta = xdp.data;
 		xdp.rxq = &rq->xdp_rxq;
 
 		act = bpf_prog_run_xdp(xdp_prog, &xdp);
@@ -848,24 +856,27 @@ static struct sk_buff *receive_mergeable(struct net_device *dev,
 
 		switch (act) {
 		case XDP_PASS:
+			metasize = xdp.data - xdp.data_meta;
+
 			/* recalculate offset to account for any header
-			 * adjustments. Note other cases do not build an
-			 * skb and avoid using offset
+			 * adjustments and minus the metasize to copy the
+			 * metadata in page_to_skb(). Note other cases do not
+			 * build an skb and avoid using offset
 			 */
-			offset = xdp.data -
-					page_address(xdp_page) - vi->hdr_len;
+			offset = xdp.data - page_address(xdp_page) -
+				 vi->hdr_len - metasize;
 
-			/* recalculate len if xdp.data or xdp.data_end were
-			 * adjusted
+			/* recalculate len if xdp.data, xdp.data_end or
+			 * xdp.data_meta were adjusted
 			 */
-			len = xdp.data_end - xdp.data + vi->hdr_len;
+			len = xdp.data_end - xdp.data + vi->hdr_len + metasize;
 			/* We can only create skb based on xdp_page. */
 			if (unlikely(xdp_page != page)) {
 				rcu_read_unlock();
 				put_page(page);
-				head_skb = page_to_skb(vi, rq, xdp_page,
-						       offset, len,
-						       PAGE_SIZE, false);
+				head_skb = page_to_skb(vi, rq, xdp_page, offset,
+						       len, PAGE_SIZE, false,
+						       metasize);
 				return head_skb;
 			}
 			break;
@@ -921,7 +932,8 @@ static struct sk_buff *receive_mergeable(struct net_device *dev,
 		goto err_skb;
 	}
 
-	head_skb = page_to_skb(vi, rq, page, offset, len, truesize, !xdp_prog);
+	head_skb = page_to_skb(vi, rq, page, offset, len, truesize, !xdp_prog,
+			       metasize);
 	curr_skb = head_skb;
 
 	if (unlikely(!curr_skb))
-- 
2.24.1


  reply	other threads:[~2020-02-25  3:32 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-25  3:31 [PATCH bpf-next v6 0/2] virtio_net: add XDP meta data support Yuya Kusakabe
2020-02-25  3:32 ` [PATCH bpf-next v6 1/2] virtio_net: keep vnet header zeroed if XDP is loaded for small buffer Yuya Kusakabe
2020-02-25  3:32   ` Yuya Kusakabe [this message]
2020-02-25  5:45     ` [PATCH bpf-next v6 2/2] virtio_net: add XDP meta data support Jason Wang
2020-02-25 11:19     ` Michael S. Tsirkin
2020-02-25  5:44   ` [PATCH bpf-next v6 1/2] virtio_net: keep vnet header zeroed if XDP is loaded for small buffer Jason Wang
2020-02-25 11:18   ` Michael S. Tsirkin
2020-02-25 21:59 ` [PATCH bpf-next v6 0/2] virtio_net: add XDP meta data support Daniel Borkmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200225033212.437563-2-yuya.kusakabe@gmail.com \
    --to=yuya.kusakabe@gmail.com \
    --cc=andriin@fb.com \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=davem@davemloft.net \
    --cc=hawk@kernel.org \
    --cc=jasowang@redhat.com \
    --cc=john.fastabend@gmail.com \
    --cc=kafai@fb.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mst@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=songliubraving@fb.com \
    --cc=yhs@fb.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).