BPF Archive on lore.kernel.org
 help / color / Atom feed
From: Joe Stringer <joe@wand.net.nz>
To: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org, daniel@iogearbox.net, ast@kernel.org,
	eric.dumazet@gmail.com, lmb@cloudflare.com, kafai@fb.com
Subject: [PATCHv3 bpf-next 0/5] Add bpf_sk_assign eBPF helper
Date: Thu, 26 Mar 2020 21:25:51 -0700
Message-ID: <20200327042556.11560-1-joe@wand.net.nz> (raw)

Introduce a new helper that allows assigning a previously-found socket
to the skb as the packet is received towards the stack, to cause the
stack to guide the packet towards that socket subject to local routing
configuration. The intention is to support TProxy use cases more
directly from eBPF programs attached at TC ingress, to simplify and
streamline Linux stack configuration in scale environments with Cilium.

Normally in ip{,6}_rcv_core(), the skb will be orphaned, dropping any
existing socket reference associated with the skb. Existing tproxy
implementations in netfilter get around this restriction by running the
tproxy logic after ip_rcv_core() in the PREROUTING table. However, this
is not an option for TC-based logic (including eBPF programs attached at
TC ingress).

This series introduces the BPF helper bpf_sk_assign() to associate the
socket with the skb on the ingress path as the packet is passed up the
stack. The initial patch in the series simply takes a reference on the
socket to ensure safety, but later patches relax this for listen

To ensure delivery to the relevant socket, we still consult the routing
table, for full examples of how to configure see the tests in patch #5;
the simplest form of the route would look like this:

  $ ip route add local default dev lo

This series is laid out as follows:
* Patch 1 extends the eBPF API to add sk_assign() and defines a new
  socket free function to allow the later paths to understand when the
  socket associated with the skb should be kept through receive.
* Patches 2-3 optimize the receive path to avoid taking a reference on
  listener sockets during receive.
* Patches 4-5 extends the selftests with examples of the new
  functionality and validation of correct behaviour.

Changes since v2:
* Add selftests for UDP socket redirection
* Drop the early demux optimization patch (defer for more testing)
* Fix check for orphaning after TC act return
* Tidy up the tests to clean up properly and be less noisy.

Changes since v1:
* Replace the metadata_dst approach with using the skb->destructor to
  determine whether the socket has been prefetched. This is much
* Avoid taking a reference on listener sockets during receive
* Restrict assigning sockets across namespaces
* Restrict assigning SO_REUSEPORT sockets
* Fix cookie usage for socket dst check
* Rebase the tests against test_progs infrastructure
* Tidy up commit messages

Joe Stringer (4):
  bpf: Add socket assign support
  net: Track socket refcounts in skb_steal_sock()
  bpf: Don't refcount LISTEN sockets in sk_assign()
  selftests: bpf: Extend sk_assign tests for UDP

Lorenz Bauer (1):
  selftests: bpf: add test for sk_assign

 include/net/inet6_hashtables.h                |   3 +-
 include/net/inet_hashtables.h                 |   3 +-
 include/net/sock.h                            |  42 ++-
 include/uapi/linux/bpf.h                      |  25 +-
 net/core/filter.c                             |  35 +-
 net/core/sock.c                               |  10 +
 net/ipv4/ip_input.c                           |   3 +-
 net/ipv4/udp.c                                |   6 +-
 net/ipv6/ip6_input.c                          |   3 +-
 net/ipv6/udp.c                                |   9 +-
 net/sched/act_bpf.c                           |   3 +
 tools/include/uapi/linux/bpf.h                |  25 +-
 .../selftests/bpf/prog_tests/sk_assign.c      | 309 ++++++++++++++++++
 .../selftests/bpf/progs/test_sk_assign.c      | 204 ++++++++++++
 14 files changed, 656 insertions(+), 24 deletions(-)
 create mode 100644 tools/testing/selftests/bpf/prog_tests/sk_assign.c
 create mode 100644 tools/testing/selftests/bpf/progs/test_sk_assign.c


             reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-27  4:25 Joe Stringer [this message]
2020-03-27  4:25 ` [PATCHv3 bpf-next 1/5] bpf: Add socket assign support Joe Stringer
2020-03-27 18:44   ` Martin KaFai Lau
2020-03-27  4:25 ` [PATCHv3 bpf-next 2/5] net: Track socket refcounts in skb_steal_sock() Joe Stringer
2020-03-27 18:45   ` Martin KaFai Lau
2020-03-27  4:25 ` [PATCHv3 bpf-next 3/5] bpf: Don't refcount LISTEN sockets in sk_assign() Joe Stringer
2020-03-27 14:26   ` Jamal Hadi Salim
2020-03-27 17:38     ` Joe Stringer
2020-03-27 18:29       ` Jamal Hadi Salim
2020-03-27  4:25 ` [PATCHv3 bpf-next 4/5] selftests: bpf: add test for sk_assign Joe Stringer
2020-03-27  4:25 ` [PATCHv3 bpf-next 5/5] selftests: bpf: Extend sk_assign tests for UDP Joe Stringer
     [not found]   ` <CACAyw9-GOw5tkR8n6p7Kct9-wq4B-9ka-X8R2V8uZv8VWUY5UQ@mail.gmail.com>
2020-03-27 19:37     ` Joe Stringer
2020-03-27  5:02 ` [PATCHv3 bpf-next 0/5] Add bpf_sk_assign eBPF helper Alexei Starovoitov
2020-03-27  5:42   ` Eric Dumazet
2020-03-27 14:13 ` Jamal Hadi Salim
2020-03-27 17:43   ` Joe Stringer
2020-03-27 18:34     ` Jamal Hadi Salim
2020-03-27 18:46 ` Martin KaFai Lau
2020-03-27 21:05   ` Joe Stringer
2020-03-28 17:25     ` Daniel Borkmann
2020-03-28 17:42       ` Joe Stringer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200327042556.11560-1-joe@wand.net.nz \
    --to=joe@wand.net.nz \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=eric.dumazet@gmail.com \
    --cc=kafai@fb.com \
    --cc=lmb@cloudflare.com \
    --cc=netdev@vger.kernel.org \


* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

BPF Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/bpf/0 bpf/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 bpf bpf/ https://lore.kernel.org/bpf \
	public-inbox-index bpf

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone https://public-inbox.org/public-inbox.git