From: Ong Boon Leong <boon.leong.ong@intel.com>
To: Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
Jose Abreu <joabreu@synopsys.com>,
"David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Alexei Starovoitov <ast@kernel.org>,
Daniel Borkmann <daniel@iogearbox.net>,
Jesper Dangaard Brouer <hawk@kernel.org>,
John Fastabend <john.fastabend@gmail.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Andrii Nakryiko <andrii@kernel.org>,
Martin KaFai Lau <kafai@fb.com>, Song Liu <songliubraving@fb.com>,
Yonghong Song <yhs@fb.com>, KP Singh <kpsingh@kernel.org>,
netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, bpf@vger.kernel.org,
Ong Boon Leong <boon.leong.ong@intel.com>
Subject: [PATCH net-next 3/6] net: stmmac: arrange Tx tail pointer update to stmmac_flush_tx_descriptors
Date: Mon, 29 Mar 2021 21:40:10 +0800 [thread overview]
Message-ID: <20210329134013.9516-4-boon.leong.ong@intel.com> (raw)
In-Reply-To: <20210329134013.9516-1-boon.leong.ong@intel.com>
This patch organizes TX tail pointer update into a new function called
stmmac_flush_tx_descriptors() so that we can reuse it in stmmac_xmit(),
stmmac_tso_xmit() and up-coming XDP implementation.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
---
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 52 +++++++++----------
1 file changed, 24 insertions(+), 28 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index ace3c3835a9f..18578239b438 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3507,6 +3507,28 @@ static void stmmac_tso_allocator(struct stmmac_priv *priv, dma_addr_t des,
}
}
+static void stmmac_flush_tx_descriptors(struct stmmac_priv *priv, int queue)
+{
+ struct stmmac_tx_queue *tx_q = &priv->tx_queue[queue];
+ int desc_size;
+
+ if (likely(priv->extend_desc))
+ desc_size = sizeof(struct dma_extended_desc);
+ else if (tx_q->tbs & STMMAC_TBS_AVAIL)
+ desc_size = sizeof(struct dma_edesc);
+ else
+ desc_size = sizeof(struct dma_desc);
+
+ /* The own bit must be the latest setting done when prepare the
+ * descriptor and then barrier is needed to make sure that
+ * all is coherent before granting the DMA engine.
+ */
+ wmb();
+
+ tx_q->tx_tail_addr = tx_q->dma_tx_phy + (tx_q->cur_tx * desc_size);
+ stmmac_set_tx_tail_ptr(priv, priv->ioaddr, tx_q->tx_tail_addr, queue);
+}
+
/**
* stmmac_tso_xmit - Tx entry point of the driver for oversized frames (TSO)
* @skb : the socket buffer
@@ -3739,12 +3761,6 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
stmmac_set_tx_owner(priv, mss_desc);
}
- /* The own bit must be the latest setting done when prepare the
- * descriptor and then barrier is needed to make sure that
- * all is coherent before granting the DMA engine.
- */
- wmb();
-
if (netif_msg_pktdata(priv)) {
pr_info("%s: curr=%d dirty=%d f=%d, e=%d, f_p=%p, nfrags %d\n",
__func__, tx_q->cur_tx, tx_q->dirty_tx, first_entry,
@@ -3755,13 +3771,7 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev)
netdev_tx_sent_queue(netdev_get_tx_queue(dev, queue), skb->len);
- if (tx_q->tbs & STMMAC_TBS_AVAIL)
- desc_size = sizeof(struct dma_edesc);
- else
- desc_size = sizeof(struct dma_desc);
-
- tx_q->tx_tail_addr = tx_q->dma_tx_phy + (tx_q->cur_tx * desc_size);
- stmmac_set_tx_tail_ptr(priv, priv->ioaddr, tx_q->tx_tail_addr, queue);
+ stmmac_flush_tx_descriptors(priv, queue);
stmmac_tx_timer_arm(priv, queue);
return NETDEV_TX_OK;
@@ -3996,25 +4006,11 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
stmmac_set_tx_owner(priv, first);
- /* The own bit must be the latest setting done when prepare the
- * descriptor and then barrier is needed to make sure that
- * all is coherent before granting the DMA engine.
- */
- wmb();
-
netdev_tx_sent_queue(netdev_get_tx_queue(dev, queue), skb->len);
stmmac_enable_dma_transmission(priv, priv->ioaddr);
- if (likely(priv->extend_desc))
- desc_size = sizeof(struct dma_extended_desc);
- else if (tx_q->tbs & STMMAC_TBS_AVAIL)
- desc_size = sizeof(struct dma_edesc);
- else
- desc_size = sizeof(struct dma_desc);
-
- tx_q->tx_tail_addr = tx_q->dma_tx_phy + (tx_q->cur_tx * desc_size);
- stmmac_set_tx_tail_ptr(priv, priv->ioaddr, tx_q->tx_tail_addr, queue);
+ stmmac_flush_tx_descriptors(priv, queue);
stmmac_tx_timer_arm(priv, queue);
return NETDEV_TX_OK;
--
2.25.1
next prev parent reply other threads:[~2021-03-29 13:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-29 13:40 [PATCH net-next 0/6] stmmac: Add XDP support Ong Boon Leong
2021-03-29 13:40 ` [PATCH net-next 1/6] stmmac: intel: set IRQ affinity hint for multi MSI vectors Ong Boon Leong
2021-03-29 13:40 ` [PATCH net-next 2/6] net: stmmac: make SPH enable/disable to be configurable Ong Boon Leong
2021-03-29 13:40 ` Ong Boon Leong [this message]
2021-03-29 13:40 ` [PATCH net-next 4/6] net: stmmac: Add initial XDP support Ong Boon Leong
2021-03-29 13:40 ` [PATCH net-next 5/6] net: stmmac: Add support for XDP_TX action Ong Boon Leong
2021-03-29 13:40 ` [PATCH net-next 6/6] net: stmmac: Add support for XDP_REDIRECT action Ong Boon Leong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210329134013.9516-4-boon.leong.ong@intel.com \
--to=boon.leong.ong@intel.com \
--cc=alexandre.torgue@st.com \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=hawk@kernel.org \
--cc=joabreu@synopsys.com \
--cc=john.fastabend@gmail.com \
--cc=kafai@fb.com \
--cc=kpsingh@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=peppe.cavallaro@st.com \
--cc=songliubraving@fb.com \
--cc=yhs@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).