bpf.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hari Bathini <hbathini@linux.ibm.com>
To: naveen.n.rao@linux.ibm.com, christophe.leroy@csgroup.eu,
	mpe@ellerman.id.au, ast@kernel.org, daniel@iogearbox.net
Cc: paulus@samba.org, andrii@kernel.org, kafai@fb.com,
	songliubraving@fb.com, yhs@fb.com, john.fastabend@gmail.com,
	kpsingh@kernel.org, netdev@vger.kernel.org, bpf@vger.kernel.org,
	linuxppc-dev@lists.ozlabs.org,
	Ravi Bangoria <ravi.bangoria@linux.ibm.com>,
	Hari Bathini <hbathini@linux.ibm.com>
Subject: [PATCH v4 5/8] bpf ppc64: Add BPF_PROBE_MEM support for JIT
Date: Wed, 29 Sep 2021 16:48:52 +0530	[thread overview]
Message-ID: <20210929111855.50254-6-hbathini@linux.ibm.com> (raw)
In-Reply-To: <20210929111855.50254-1-hbathini@linux.ibm.com>

From: Ravi Bangoria <ravi.bangoria@linux.ibm.com>

BPF load instruction with BPF_PROBE_MEM mode can cause a fault
inside kernel. Append exception table for such instructions
within BPF program.

Unlike other archs which uses extable 'fixup' field to pass dest_reg
and nip, BPF exception table on PowerPC follows the generic PowerPC
exception table design, where it populates both fixup and extable
sections within BPF program. fixup section contains two instructions,
first instruction clears dest_reg and 2nd jumps to next instruction
in the BPF code. extable 'insn' field contains relative offset of
the instruction and 'fixup' field contains relative offset of the
fixup entry. Example layout of BPF program with extable present:

             +------------------+
             |                  |
             |                  |
   0x4020 -->| ld   r27,4(r3)   |
             |                  |
             |                  |
   0x40ac -->| lwz  r3,0(r4)    |
             |                  |
             |                  |
             |------------------|
   0x4280 -->| li  r27,0        |  \ fixup entry
             | b   0x4024       |  /
   0x4288 -->| li  r3,0         |
             | b   0x40b0       |
             |------------------|
   0x4290 -->| insn=0xfffffd90  |  \ extable entry
             | fixup=0xffffffec |  /
   0x4298 -->| insn=0xfffffe14  |
             | fixup=0xffffffec |
             +------------------+

   (Addresses shown here are chosen random, not real)

Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
---

Changes in v4:
* Dropped explicit fallthrough statement for empty switch cases.


 arch/powerpc/net/bpf_jit.h        |  8 +++-
 arch/powerpc/net/bpf_jit_comp.c   | 70 ++++++++++++++++++++++++++++---
 arch/powerpc/net/bpf_jit_comp32.c |  2 +-
 arch/powerpc/net/bpf_jit_comp64.c | 13 +++++-
 4 files changed, 84 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h
index 0c8f885b8f48..561689a2abdf 100644
--- a/arch/powerpc/net/bpf_jit.h
+++ b/arch/powerpc/net/bpf_jit.h
@@ -141,8 +141,11 @@ struct codegen_context {
 	unsigned int idx;
 	unsigned int stack_size;
 	int b2p[ARRAY_SIZE(b2p)];
+	unsigned int exentry_idx;
 };
 
+#define BPF_FIXUP_LEN	2 /* Two instructions => 8 bytes */
+
 static inline void bpf_flush_icache(void *start, void *end)
 {
 	smp_wmb();	/* smp write barrier */
@@ -166,11 +169,14 @@ static inline void bpf_clear_seen_register(struct codegen_context *ctx, int i)
 
 void bpf_jit_emit_func_call_rel(u32 *image, struct codegen_context *ctx, u64 func);
 int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *ctx,
-		       u32 *addrs);
+		       u32 *addrs, int pass);
 void bpf_jit_build_prologue(u32 *image, struct codegen_context *ctx);
 void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx);
 void bpf_jit_realloc_regs(struct codegen_context *ctx);
 
+int bpf_add_extable_entry(struct bpf_prog *fp, u32 *image, int pass, struct codegen_context *ctx,
+			  int insn_idx, int jmp_off, int dst_reg);
+
 #endif
 
 #endif
diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c
index c5c9e8ad1de7..f02457c6b54f 100644
--- a/arch/powerpc/net/bpf_jit_comp.c
+++ b/arch/powerpc/net/bpf_jit_comp.c
@@ -101,6 +101,8 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 	struct bpf_prog *tmp_fp;
 	bool bpf_blinded = false;
 	bool extra_pass = false;
+	u32 extable_len;
+	u32 fixup_len;
 
 	if (!fp->jit_requested)
 		return org_fp;
@@ -131,7 +133,6 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 		image = jit_data->image;
 		bpf_hdr = jit_data->header;
 		proglen = jit_data->proglen;
-		alloclen = proglen + FUNCTION_DESCR_SIZE;
 		extra_pass = true;
 		goto skip_init_ctx;
 	}
@@ -149,7 +150,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 	cgctx.stack_size = round_up(fp->aux->stack_depth, 16);
 
 	/* Scouting faux-generate pass 0 */
-	if (bpf_jit_build_body(fp, 0, &cgctx, addrs)) {
+	if (bpf_jit_build_body(fp, 0, &cgctx, addrs, 0)) {
 		/* We hit something illegal or unsupported. */
 		fp = org_fp;
 		goto out_addrs;
@@ -162,7 +163,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 	 */
 	if (cgctx.seen & SEEN_TAILCALL) {
 		cgctx.idx = 0;
-		if (bpf_jit_build_body(fp, 0, &cgctx, addrs)) {
+		if (bpf_jit_build_body(fp, 0, &cgctx, addrs, 0)) {
 			fp = org_fp;
 			goto out_addrs;
 		}
@@ -177,8 +178,11 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 	bpf_jit_build_prologue(0, &cgctx);
 	bpf_jit_build_epilogue(0, &cgctx);
 
+	fixup_len = fp->aux->num_exentries * BPF_FIXUP_LEN * 4;
+	extable_len = fp->aux->num_exentries * sizeof(struct exception_table_entry);
+
 	proglen = cgctx.idx * 4;
-	alloclen = proglen + FUNCTION_DESCR_SIZE;
+	alloclen = proglen + FUNCTION_DESCR_SIZE + fixup_len + extable_len;
 
 	bpf_hdr = bpf_jit_binary_alloc(alloclen, &image, 4, bpf_jit_fill_ill_insns);
 	if (!bpf_hdr) {
@@ -186,6 +190,9 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 		goto out_addrs;
 	}
 
+	if (extable_len)
+		fp->aux->extable = (void *)image + FUNCTION_DESCR_SIZE + proglen + fixup_len;
+
 skip_init_ctx:
 	code_base = (u32 *)(image + FUNCTION_DESCR_SIZE);
 
@@ -210,7 +217,11 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 		/* Now build the prologue, body code & epilogue for real. */
 		cgctx.idx = 0;
 		bpf_jit_build_prologue(code_base, &cgctx);
-		bpf_jit_build_body(fp, code_base, &cgctx, addrs);
+		if (bpf_jit_build_body(fp, code_base, &cgctx, addrs, pass)) {
+			bpf_jit_binary_free(bpf_hdr);
+			fp = org_fp;
+			goto out_addrs;
+		}
 		bpf_jit_build_epilogue(code_base, &cgctx);
 
 		if (bpf_jit_enable > 1)
@@ -234,7 +245,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 
 	fp->bpf_func = (void *)image;
 	fp->jited = 1;
-	fp->jited_len = alloclen;
+	fp->jited_len = proglen + FUNCTION_DESCR_SIZE;
 
 	bpf_flush_icache(bpf_hdr, (u8 *)bpf_hdr + (bpf_hdr->pages * PAGE_SIZE));
 	bpf_jit_binary_lock_ro(bpf_hdr);
@@ -258,3 +269,50 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 
 	return fp;
 }
+
+/*
+ * The caller should check for (BPF_MODE(code) == BPF_PROBE_MEM) before calling
+ * this function, as this only applies to BPF_PROBE_MEM, for now.
+ */
+int bpf_add_extable_entry(struct bpf_prog *fp, u32 *image, int pass, struct codegen_context *ctx,
+			  int insn_idx, int jmp_off, int dst_reg)
+{
+	off_t offset;
+	unsigned long pc;
+	struct exception_table_entry *ex;
+	u32 *fixup;
+
+	/* Populate extable entries only in the last pass */
+	if (pass != 2)
+		return 0;
+
+	if (!fp->aux->extable ||
+	    WARN_ON_ONCE(ctx->exentry_idx >= fp->aux->num_exentries))
+		return -EINVAL;
+
+	pc = (unsigned long)&image[insn_idx];
+
+	fixup = (void *)fp->aux->extable -
+		(fp->aux->num_exentries * BPF_FIXUP_LEN * 4) +
+		(ctx->exentry_idx * BPF_FIXUP_LEN * 4);
+
+	fixup[0] = PPC_RAW_LI(dst_reg, 0);
+
+	fixup[BPF_FIXUP_LEN - 1] =
+		PPC_RAW_BRANCH((long)(pc + jmp_off) - (long)&fixup[BPF_FIXUP_LEN - 1]);
+
+	ex = &fp->aux->extable[ctx->exentry_idx];
+
+	offset = pc - (long)&ex->insn;
+	if (WARN_ON_ONCE(offset >= 0 || offset < INT_MIN))
+		return -ERANGE;
+	ex->insn = offset;
+
+	offset = (long)fixup - (long)&ex->fixup;
+	if (WARN_ON_ONCE(offset >= 0 || offset < INT_MIN))
+		return -ERANGE;
+	ex->fixup = offset;
+
+	ctx->exentry_idx++;
+	return 0;
+}
diff --git a/arch/powerpc/net/bpf_jit_comp32.c b/arch/powerpc/net/bpf_jit_comp32.c
index 65a4d1ed97bf..c04291517a7e 100644
--- a/arch/powerpc/net/bpf_jit_comp32.c
+++ b/arch/powerpc/net/bpf_jit_comp32.c
@@ -266,7 +266,7 @@ static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32
 
 /* Assemble the body code between the prologue & epilogue */
 int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *ctx,
-		       u32 *addrs)
+		       u32 *addrs, int pass)
 {
 	const struct bpf_insn *insn = fp->insnsi;
 	int flen = fp->len;
diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c
index 49e6e0b6e4d2..4170999371ee 100644
--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@@ -272,7 +272,7 @@ static void bpf_jit_emit_tail_call(u32 *image, struct codegen_context *ctx, u32
 
 /* Assemble the body code between the prologue & epilogue */
 int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *ctx,
-		       u32 *addrs)
+		       u32 *addrs, int pass)
 {
 	const struct bpf_insn *insn = fp->insnsi;
 	int flen = fp->len;
@@ -717,12 +717,16 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *
 		 */
 		/* dst = *(u8 *)(ul) (src + off) */
 		case BPF_LDX | BPF_MEM | BPF_B:
+		case BPF_LDX | BPF_PROBE_MEM | BPF_B:
 		/* dst = *(u16 *)(ul) (src + off) */
 		case BPF_LDX | BPF_MEM | BPF_H:
+		case BPF_LDX | BPF_PROBE_MEM | BPF_H:
 		/* dst = *(u32 *)(ul) (src + off) */
 		case BPF_LDX | BPF_MEM | BPF_W:
+		case BPF_LDX | BPF_PROBE_MEM | BPF_W:
 		/* dst = *(u64 *)(ul) (src + off) */
 		case BPF_LDX | BPF_MEM | BPF_DW:
+		case BPF_LDX | BPF_PROBE_MEM | BPF_DW:
 			switch (size) {
 			case BPF_B:
 				EMIT(PPC_RAW_LBZ(dst_reg, src_reg, off));
@@ -740,6 +744,13 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, struct codegen_context *
 
 			if (size != BPF_DW && insn_is_zext(&insn[i + 1]))
 				addrs[++i] = ctx->idx * 4;
+
+			if (BPF_MODE(code) == BPF_PROBE_MEM) {
+				ret = bpf_add_extable_entry(fp, image, pass, ctx, ctx->idx - 1,
+							    4, dst_reg);
+				if (ret)
+					return ret;
+			}
 			break;
 
 		/*
-- 
2.31.1


  parent reply	other threads:[~2021-09-29 11:20 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-29 11:18 [PATCH v4 0/8] bpf powerpc: Add BPF_PROBE_MEM support in powerpc JIT compiler Hari Bathini
2021-09-29 11:18 ` [PATCH v4 1/8] bpf powerpc: Remove unused SEEN_STACK Hari Bathini
2021-09-29 11:18 ` [PATCH v4 2/8] bpf powerpc: Remove extra_pass from bpf_jit_build_body() Hari Bathini
2021-09-29 11:18 ` [PATCH v4 3/8] bpf powerpc: refactor JIT compiler code Hari Bathini
2021-09-29 11:42   ` Christophe Leroy
2021-09-29 11:18 ` [PATCH v4 4/8] powerpc/ppc-opcode: introduce PPC_RAW_BRANCH() macro Hari Bathini
2021-09-29 11:18 ` Hari Bathini [this message]
2021-09-29 11:43   ` [PATCH v4 5/8] bpf ppc64: Add BPF_PROBE_MEM support for JIT Christophe Leroy
2021-09-29 11:47   ` Christophe Leroy
2021-09-30  4:18     ` Jordan Niethe
2021-09-29 11:18 ` [PATCH v4 6/8] bpf ppc64: Access only if addr is kernel address Hari Bathini
2021-09-29 11:44   ` LEROY Christophe
2021-09-29 11:18 ` [PATCH v4 7/8] bpf ppc32: Add BPF_PROBE_MEM support for JIT Hari Bathini
2021-09-29 11:44   ` Christophe Leroy
2021-09-29 11:18 ` [PATCH v4 8/8] bpf ppc32: Access only if addr is kernel address Hari Bathini
2021-09-29 11:45   ` Christophe Leroy
2023-09-14  6:18   ` Christophe Leroy
2023-09-14  8:23     ` Hari Bathini
2021-09-30 20:57 ` [PATCH v4 0/8] bpf powerpc: Add BPF_PROBE_MEM support in powerpc JIT compiler Daniel Borkmann
2021-10-01 21:22   ` Naveen N. Rao
2021-10-03 22:49   ` Michael Ellerman
2021-10-04  8:05     ` Daniel Borkmann
2021-10-04  8:43       ` Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210929111855.50254-6-hbathini@linux.ibm.com \
    --to=hbathini@linux.ibm.com \
    --cc=andrii@kernel.org \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=christophe.leroy@csgroup.eu \
    --cc=daniel@iogearbox.net \
    --cc=john.fastabend@gmail.com \
    --cc=kafai@fb.com \
    --cc=kpsingh@kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=naveen.n.rao@linux.ibm.com \
    --cc=netdev@vger.kernel.org \
    --cc=paulus@samba.org \
    --cc=ravi.bangoria@linux.ibm.com \
    --cc=songliubraving@fb.com \
    --cc=yhs@fb.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).