bpf.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Quentin Monnet <quentin@isovalent.com>
To: Alexei Starovoitov <ast@kernel.org>,
	Daniel Borkmann <daniel@iogearbox.net>,
	Andrii Nakryiko <andrii@kernel.org>
Cc: netdev@vger.kernel.org, bpf@vger.kernel.org,
	Quentin Monnet <quentin@isovalent.com>
Subject: [PATCH bpf-next 3/9] tools: resolve_btfids: install libbpf headers when building
Date: Thu, 30 Sep 2021 12:33:00 +0100	[thread overview]
Message-ID: <20210930113306.14950-4-quentin@isovalent.com> (raw)
In-Reply-To: <20210930113306.14950-1-quentin@isovalent.com>

API headers from libbpf should not be accessed directly from the
library's source directory. Instead, they should be exported with "make
install_headers". Let's make sure that resolve_btfids installs the
headers properly when building.

When descending from a parent Makefile, the specific output directories
for building the library and exporting the headers are configurable with
LIBBPF_OUT and LIBBPF_DESTDIR, respectively. This is in addition to
OUTPUT, on top of which those variables are constructed by default.

Also adjust the Makefile for the BPF selftests in order to point to the
(target) libbpf shared with other tools, instead of building a version
specific to resolve_btfids.

Signed-off-by: Quentin Monnet <quentin@isovalent.com>
---
 tools/bpf/resolve_btfids/Makefile    | 17 ++++++++++++-----
 tools/bpf/resolve_btfids/main.c      |  4 ++--
 tools/testing/selftests/bpf/Makefile |  7 +++++--
 3 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/tools/bpf/resolve_btfids/Makefile b/tools/bpf/resolve_btfids/Makefile
index 08b75e314ae7..89a46d4d0768 100644
--- a/tools/bpf/resolve_btfids/Makefile
+++ b/tools/bpf/resolve_btfids/Makefile
@@ -29,25 +29,31 @@ BPFOBJ     := $(OUTPUT)/libbpf/libbpf.a
 LIBBPF_OUT := $(abspath $(dir $(BPFOBJ)))/
 SUBCMDOBJ  := $(OUTPUT)/libsubcmd/libsubcmd.a
 
+LIBBPF_DESTDIR := $(LIBBPF_OUT)
+LIBBPF_INCLUDE := $(LIBBPF_DESTDIR)include
+
 BINARY     := $(OUTPUT)/resolve_btfids
 BINARY_IN  := $(BINARY)-in.o
 
 all: $(BINARY)
 
-$(OUTPUT) $(OUTPUT)/libbpf $(OUTPUT)/libsubcmd:
+$(OUTPUT) $(OUTPUT)/libsubcmd $(LIBBPF_OUT) $(LIBBPF_INCLUDE):
 	$(call msg,MKDIR,,$@)
 	$(Q)mkdir -p $(@)
 
 $(SUBCMDOBJ): fixdep FORCE | $(OUTPUT)/libsubcmd
 	$(Q)$(MAKE) -C $(SUBCMD_SRC) OUTPUT=$(abspath $(dir $@))/ $(abspath $@)
 
-$(BPFOBJ): $(wildcard $(LIBBPF_SRC)/*.[ch] $(LIBBPF_SRC)/Makefile) | $(OUTPUT)/libbpf
-	$(Q)$(MAKE) $(submake_extras) -C $(LIBBPF_SRC)  OUTPUT=$(LIBBPF_OUT) $(abspath $@)
+$(BPFOBJ): $(wildcard $(LIBBPF_SRC)/*.[ch] $(LIBBPF_SRC)/Makefile)	       \
+	   | $(LIBBPF_OUT) $(LIBBPF_INCLUDE)
+	$(Q)$(MAKE) $(submake_extras) -C $(LIBBPF_SRC) OUTPUT=$(LIBBPF_OUT)    \
+		    DESTDIR=$(LIBBPF_DESTDIR) prefix=			       \
+		    $(abspath $@) install_headers
 
 CFLAGS := -g \
           -I$(srctree)/tools/include \
           -I$(srctree)/tools/include/uapi \
-          -I$(LIBBPF_SRC) \
+          -I$(LIBBPF_INCLUDE) \
           -I$(SUBCMD_SRC)
 
 LIBS = -lelf -lz
@@ -65,7 +71,8 @@ $(BINARY): $(BPFOBJ) $(SUBCMDOBJ) $(BINARY_IN)
 clean_objects := $(wildcard $(OUTPUT)/*.o                \
                             $(OUTPUT)/.*.o.cmd           \
                             $(OUTPUT)/.*.o.d             \
-                            $(OUTPUT)/libbpf             \
+                            $(LIBBPF_OUT)                \
+                            $(LIBBPF_DESTDIR)            \
                             $(OUTPUT)/libsubcmd          \
                             $(OUTPUT)/resolve_btfids)
 
diff --git a/tools/bpf/resolve_btfids/main.c b/tools/bpf/resolve_btfids/main.c
index de6365b53c9c..91af785e6de5 100644
--- a/tools/bpf/resolve_btfids/main.c
+++ b/tools/bpf/resolve_btfids/main.c
@@ -60,8 +60,8 @@
 #include <linux/rbtree.h>
 #include <linux/zalloc.h>
 #include <linux/err.h>
-#include <btf.h>
-#include <libbpf.h>
+#include <bpf/btf.h>
+#include <bpf/libbpf.h>
 #include <parse-options.h>
 
 #define BTF_IDS_SECTION	".BTF_ids"
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 5432bfc99740..0167514ccaa2 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -122,9 +122,11 @@ BPFOBJ := $(BUILD_DIR)/libbpf/libbpf.a
 ifneq ($(CROSS_COMPILE),)
 HOST_BUILD_DIR		:= $(BUILD_DIR)/host
 HOST_SCRATCH_DIR	:= $(OUTPUT)/host-tools
+HOST_INCLUDE_DIR	:= $(HOST_SCRATCH_DIR)/include
 else
 HOST_BUILD_DIR		:= $(BUILD_DIR)
 HOST_SCRATCH_DIR	:= $(SCRATCH_DIR)
+HOST_INCLUDE_DIR	:= $(INCLUDE_DIR)
 endif
 HOST_BPFOBJ := $(HOST_BUILD_DIR)/libbpf/libbpf.a
 RESOLVE_BTFIDS := $(HOST_BUILD_DIR)/resolve_btfids/resolve_btfids
@@ -152,7 +154,7 @@ $(notdir $(TEST_GEN_PROGS)						\
 # sort removes libbpf duplicates when not cross-building
 MAKE_DIRS := $(sort $(BUILD_DIR)/libbpf $(HOST_BUILD_DIR)/libbpf	       \
 	       $(HOST_BUILD_DIR)/bpftool $(HOST_BUILD_DIR)/resolve_btfids      \
-	       $(INCLUDE_DIR))
+	       $(INCLUDE_DIR) $(HOST_INCLUDE_DIR))
 $(MAKE_DIRS):
 	$(call msg,MKDIR,,$@)
 	$(Q)mkdir -p $@
@@ -235,7 +237,7 @@ $(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile)		       \
 ifneq ($(BPFOBJ),$(HOST_BPFOBJ))
 $(HOST_BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile)                \
 	   ../../../include/uapi/linux/bpf.h                                   \
-	   | $(INCLUDE_DIR) $(HOST_BUILD_DIR)/libbpf
+	   | $(HOST_INCLUDE_DIR) $(HOST_BUILD_DIR)/libbpf
 	$(Q)$(MAKE) $(submake_extras) -C $(BPFDIR)                             \
 		    EXTRA_CFLAGS='-g -O0'				       \
 		    OUTPUT=$(HOST_BUILD_DIR)/libbpf/ CC=$(HOSTCC) LD=$(HOSTLD) \
@@ -260,6 +262,7 @@ $(RESOLVE_BTFIDS): $(HOST_BPFOBJ) | $(HOST_BUILD_DIR)/resolve_btfids	\
 		       $(TOOLSDIR)/lib/str_error_r.c
 	$(Q)$(MAKE) $(submake_extras) -C $(TOOLSDIR)/bpf/resolve_btfids	\
 		CC=$(HOSTCC) LD=$(HOSTLD) AR=$(HOSTAR) \
+		LIBBPF_INCLUDE=$(HOST_INCLUDE_DIR) \
 		OUTPUT=$(HOST_BUILD_DIR)/resolve_btfids/ BPFOBJ=$(HOST_BPFOBJ)
 
 # Get Clang's default includes on this system, as opposed to those seen by
-- 
2.30.2


  parent reply	other threads:[~2021-09-30 11:34 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-30 11:32 [PATCH bpf-next 0/9] install libbpf headers when using the library Quentin Monnet
2021-09-30 11:32 ` [PATCH bpf-next 1/9] tools: bpftool: remove unused includes to <bpf/bpf_gen_internal.h> Quentin Monnet
2021-09-30 11:32 ` [PATCH bpf-next 2/9] tools: bpftool: install libbpf headers instead of including the dir Quentin Monnet
2021-09-30 11:33 ` Quentin Monnet [this message]
2021-09-30 11:33 ` [PATCH bpf-next 4/9] tools: runqslower: install libbpf headers when building Quentin Monnet
2021-09-30 11:33 ` [PATCH bpf-next 5/9] bpf: preload: " Quentin Monnet
2021-09-30 11:33 ` [PATCH bpf-next 6/9] bpf: iterators: " Quentin Monnet
2021-09-30 12:17   ` Quentin Monnet
2021-10-01 11:06     ` Quentin Monnet
2021-10-01 22:43       ` Andrii Nakryiko
2021-09-30 11:33 ` [PATCH bpf-next 7/9] samples/bpf: " Quentin Monnet
2021-09-30 11:33 ` [PATCH bpf-next 8/9] samples/bpf: update .gitignore Quentin Monnet
2021-09-30 11:33 ` [PATCH bpf-next 9/9] selftests/bpf: better clean up for runqslower in test_bpftool_build.sh Quentin Monnet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210930113306.14950-4-quentin@isovalent.com \
    --to=quentin@isovalent.com \
    --cc=andrii@kernel.org \
    --cc=ast@kernel.org \
    --cc=bpf@vger.kernel.org \
    --cc=daniel@iogearbox.net \
    --cc=netdev@vger.kernel.org \
    --subject='Re: [PATCH bpf-next 3/9] tools: resolve_btfids: install libbpf headers when building' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).