From: Quentin Monnet <quentin@isovalent.com>
To: Alexei Starovoitov <ast@kernel.org>,
Daniel Borkmann <daniel@iogearbox.net>,
Andrii Nakryiko <andrii@kernel.org>
Cc: netdev@vger.kernel.org, bpf@vger.kernel.org,
Quentin Monnet <quentin@isovalent.com>
Subject: [PATCH bpf-next v2 2/9] tools: bpftool: install libbpf headers instead of including the dir
Date: Fri, 1 Oct 2021 12:08:49 +0100 [thread overview]
Message-ID: <20211001110856.14730-3-quentin@isovalent.com> (raw)
In-Reply-To: <20211001110856.14730-1-quentin@isovalent.com>
Bpftool relies on libbpf, therefore it relies on a number of headers
from the library and must be linked against the library. The Makefile
for bpftool exposes these objects by adding tools/lib as an include
directory ("-I$(srctree)/tools/lib"). This is a working solution, but
this is not the cleanest one. The risk is to involuntarily include
objects that are not intended to be exposed by the libbpf.
The headers needed to compile bpftool should in fact be "installed" from
libbpf, with its "install_headers" Makefile target. In addition, there
is one header which is internal to the library and not supposed to be
used by external applications, but that bpftool uses anyway.
Adjust the Makefile in order to install the header files properly before
compiling bpftool. Also copy the additional internal header file
(nlattr.h), but call it out explicitly. Build (and install headers) in a
subdirectory under bpftool/ instead of tools/lib/bpf/. When descending
from a parent Makefile, this is configurable by setting the OUTPUT,
LIBBPF_OUTPUT and LIBBPF_DESTDIR variables.
Also adjust the Makefile for BPF selftests, so as to reuse the (host)
libbpf compiled earlier and to avoid compiling a separate version of the
library just for bpftool.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
---
tools/bpf/bpftool/Makefile | 27 ++++++++++++++++-----------
tools/testing/selftests/bpf/Makefile | 2 ++
2 files changed, 18 insertions(+), 11 deletions(-)
diff --git a/tools/bpf/bpftool/Makefile b/tools/bpf/bpftool/Makefile
index 1fcf5b01a193..78e42963535a 100644
--- a/tools/bpf/bpftool/Makefile
+++ b/tools/bpf/bpftool/Makefile
@@ -17,16 +17,16 @@ endif
BPF_DIR = $(srctree)/tools/lib/bpf/
ifneq ($(OUTPUT),)
- LIBBPF_OUTPUT = $(OUTPUT)/libbpf/
- LIBBPF_PATH = $(LIBBPF_OUTPUT)
- BOOTSTRAP_OUTPUT = $(OUTPUT)/bootstrap/
+ _OUTPUT := $(OUTPUT)
else
- LIBBPF_OUTPUT =
- LIBBPF_PATH = $(BPF_DIR)
- BOOTSTRAP_OUTPUT = $(CURDIR)/bootstrap/
+ _OUTPUT := $(CURDIR)
endif
+BOOTSTRAP_OUTPUT := $(_OUTPUT)/bootstrap/
+LIBBPF_OUTPUT := $(_OUTPUT)/libbpf/
+LIBBPF_DESTDIR := $(LIBBPF_OUTPUT)
+LIBBPF_INCLUDE := $(LIBBPF_DESTDIR)/include
-LIBBPF = $(LIBBPF_PATH)libbpf.a
+LIBBPF = $(LIBBPF_OUTPUT)libbpf.a
LIBBPF_BOOTSTRAP_OUTPUT = $(BOOTSTRAP_OUTPUT)libbpf/
LIBBPF_BOOTSTRAP = $(LIBBPF_BOOTSTRAP_OUTPUT)libbpf.a
@@ -37,8 +37,14 @@ endif
$(LIBBPF_OUTPUT) $(BOOTSTRAP_OUTPUT) $(LIBBPF_BOOTSTRAP_OUTPUT):
$(QUIET_MKDIR)mkdir -p $@
+# We need to copy nlattr.h which is not otherwise exported by libbpf, but still
+# required by bpftool.
$(LIBBPF): FORCE | $(LIBBPF_OUTPUT)
- $(Q)$(MAKE) -C $(BPF_DIR) OUTPUT=$(LIBBPF_OUTPUT) $(LIBBPF_OUTPUT)libbpf.a
+ $(Q)$(MAKE) -C $(BPF_DIR) OUTPUT=$(LIBBPF_OUTPUT) \
+ DESTDIR=$(LIBBPF_DESTDIR) prefix= \
+ $(LIBBPF_OUTPUT)libbpf.a install_headers
+ $(call QUIET_INSTALL, bpf/nlattr.h)
+ $(Q)install -m 644 -t $(LIBBPF_INCLUDE)/bpf/ $(BPF_DIR)nlattr.h
$(LIBBPF_BOOTSTRAP): FORCE | $(LIBBPF_BOOTSTRAP_OUTPUT)
$(Q)$(MAKE) -C $(BPF_DIR) OUTPUT=$(LIBBPF_BOOTSTRAP_OUTPUT) \
@@ -60,10 +66,10 @@ CFLAGS += -W -Wall -Wextra -Wno-unused-parameter -Wno-missing-field-initializers
CFLAGS += $(filter-out -Wswitch-enum -Wnested-externs,$(EXTRA_WARNINGS))
CFLAGS += -DPACKAGE='"bpftool"' -D__EXPORTED_HEADERS__ \
-I$(if $(OUTPUT),$(OUTPUT),.) \
+ -I$(LIBBPF_INCLUDE) \
-I$(srctree)/kernel/bpf/ \
-I$(srctree)/tools/include \
-I$(srctree)/tools/include/uapi \
- -I$(srctree)/tools/lib \
-I$(srctree)/tools/perf
CFLAGS += -DBPFTOOL_VERSION='"$(BPFTOOL_VERSION)"'
ifneq ($(EXTRA_CFLAGS),)
@@ -167,8 +173,7 @@ $(OUTPUT)%.bpf.o: skeleton/%.bpf.c $(OUTPUT)vmlinux.h $(LIBBPF)
$(QUIET_CLANG)$(CLANG) \
-I$(if $(OUTPUT),$(OUTPUT),.) \
-I$(srctree)/tools/include/uapi/ \
- -I$(LIBBPF_PATH) \
- -I$(srctree)/tools/lib \
+ -I$(LIBBPF_INCLUDE) \
-g -O2 -Wall -target bpf -c $< -o $@ && $(LLVM_STRIP) -g $@
$(OUTPUT)%.skel.h: $(OUTPUT)%.bpf.o $(BPFTOOL_BOOTSTRAP)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 326ea75ce99e..5432bfc99740 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -209,6 +209,8 @@ $(DEFAULT_BPFTOOL): $(wildcard $(BPFTOOLDIR)/*.[ch] $(BPFTOOLDIR)/Makefile) \
CC=$(HOSTCC) LD=$(HOSTLD) \
EXTRA_CFLAGS='-g -O0' \
OUTPUT=$(HOST_BUILD_DIR)/bpftool/ \
+ LIBBPF_OUTPUT=$(HOST_BUILD_DIR)/libbpf/ \
+ LIBBPF_DESTDIR=$(HOST_SCRATCH_DIR)/ \
prefix= DESTDIR=$(HOST_SCRATCH_DIR)/ install
all: docs
--
2.30.2
next prev parent reply other threads:[~2021-10-01 11:09 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-01 11:08 [PATCH bpf-next v2 0/9] install libbpf headers when using the library Quentin Monnet
2021-10-01 11:08 ` [PATCH bpf-next v2 1/9] tools: bpftool: remove unused includes to <bpf/bpf_gen_internal.h> Quentin Monnet
2021-10-01 11:08 ` Quentin Monnet [this message]
2021-10-01 22:55 ` [PATCH bpf-next v2 2/9] tools: bpftool: install libbpf headers instead of including the dir Andrii Nakryiko
2021-10-01 11:08 ` [PATCH bpf-next v2 3/9] tools: resolve_btfids: install libbpf headers when building Quentin Monnet
2021-10-01 23:01 ` Andrii Nakryiko
2021-10-01 11:08 ` [PATCH bpf-next v2 4/9] tools: runqslower: " Quentin Monnet
2021-10-01 11:08 ` [PATCH bpf-next v2 5/9] bpf: preload: " Quentin Monnet
2021-10-01 11:08 ` [PATCH bpf-next v2 6/9] bpf: iterators: " Quentin Monnet
2021-10-01 23:19 ` Andrii Nakryiko
2021-10-02 20:27 ` Quentin Monnet
2021-10-02 22:11 ` Quentin Monnet
2021-10-04 19:10 ` Andrii Nakryiko
2021-10-04 21:30 ` Quentin Monnet
2021-10-05 20:03 ` Quentin Monnet
2021-10-06 17:44 ` Andrii Nakryiko
2021-10-01 11:08 ` [PATCH bpf-next v2 7/9] samples/bpf: " Quentin Monnet
2021-10-01 23:22 ` Andrii Nakryiko
2021-10-02 20:30 ` Quentin Monnet
2021-10-01 11:08 ` [PATCH bpf-next v2 8/9] samples/bpf: update .gitignore Quentin Monnet
2021-10-01 11:08 ` [PATCH bpf-next v2 9/9] selftests/bpf: better clean up for runqslower in test_bpftool_build.sh Quentin Monnet
2021-10-01 23:05 ` [PATCH bpf-next v2 0/9] install libbpf headers when using the library Andrii Nakryiko
2021-10-01 23:27 ` Andrii Nakryiko
2021-10-02 20:40 ` Quentin Monnet
2021-10-03 19:20 ` Quentin Monnet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211001110856.14730-3-quentin@isovalent.com \
--to=quentin@isovalent.com \
--cc=andrii@kernel.org \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=netdev@vger.kernel.org \
--subject='Re: [PATCH bpf-next v2 2/9] tools: bpftool: install libbpf headers instead of including the dir' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).