[PATCH bpf-next v6 08/18] xdp: Add VLAN tag hint

[Larysa Zaremba <larysa.zaremba@intel.com>]

Implement functionality that enables drivers to expose VLAN tag
to XDP code.

VLAN tag is represented by 2 variables:
- protocol ID, which is passed to bpf code in BE
- VLAN TCI, in host byte order

Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
---
 Documentation/networking/xdp-rx-metadata.rst |  8 ++++-
 include/net/xdp.h                            |  6 ++++
 include/uapi/linux/netdev.h                  |  5 ++-
 net/core/xdp.c                               | 33 ++++++++++++++++++++
 tools/include/uapi/linux/netdev.h            |  5 ++-
 5 files changed, 54 insertions(+), 3 deletions(-)

diff --git a/Documentation/networking/xdp-rx-metadata.rst b/Documentation/networking/xdp-rx-metadata.rst
index 205696780b78..bb53b00d1b2c 100644
--- a/Documentation/networking/xdp-rx-metadata.rst
+++ b/Documentation/networking/xdp-rx-metadata.rst
@@ -18,7 +18,13 @@ Currently, the following kfuncs are supported. In the future, as more
 metadata is supported, this set will grow:
 
 .. kernel-doc:: net/core/xdp.c
-   :identifiers: bpf_xdp_metadata_rx_timestamp bpf_xdp_metadata_rx_hash
+   :identifiers: bpf_xdp_metadata_rx_timestamp
+
+.. kernel-doc:: net/core/xdp.c
+   :identifiers: bpf_xdp_metadata_rx_hash
+
+.. kernel-doc:: net/core/xdp.c
+   :identifiers: bpf_xdp_metadata_rx_vlan_tag
 
 An XDP program can use these kfuncs to read the metadata into stack
 variables for its own consumption. Or, to pass the metadata on to other
diff --git a/include/net/xdp.h b/include/net/xdp.h
index eb77040b4825..ef79f124dbcf 100644
--- a/include/net/xdp.h
+++ b/include/net/xdp.h
@@ -399,6 +399,10 @@ void xdp_attachment_setup(struct xdp_attachment_info *info,
 			   NETDEV_XDP_RX_METADATA_HASH, \
 			   bpf_xdp_metadata_rx_hash, \
 			   xmo_rx_hash) \
+	XDP_METADATA_KFUNC(XDP_METADATA_KFUNC_RX_VLAN_TAG, \
+			   NETDEV_XDP_RX_METADATA_VLAN_TAG, \
+			   bpf_xdp_metadata_rx_vlan_tag, \
+			   xmo_rx_vlan_tag) \
 
 enum xdp_rx_metadata {
 #define XDP_METADATA_KFUNC(name, _, __, ___) name,
@@ -460,6 +464,8 @@ struct xdp_metadata_ops {
 	int	(*xmo_rx_timestamp)(const struct xdp_md *ctx, u64 *timestamp);
 	int	(*xmo_rx_hash)(const struct xdp_md *ctx, u32 *hash,
 			       enum xdp_rss_hash_type *rss_type);
+	int	(*xmo_rx_vlan_tag)(const struct xdp_md *ctx, __be16 *vlan_proto,
+				   u16 *vlan_tci);
 };
 
 #ifdef CONFIG_NET
diff --git a/include/uapi/linux/netdev.h b/include/uapi/linux/netdev.h
index 2943a151d4f1..661f603e3e43 100644
--- a/include/uapi/linux/netdev.h
+++ b/include/uapi/linux/netdev.h
@@ -44,13 +44,16 @@ enum netdev_xdp_act {
  *   timestamp via bpf_xdp_metadata_rx_timestamp().
  * @NETDEV_XDP_RX_METADATA_HASH: Device is capable of exposing receive packet
  *   hash via bpf_xdp_metadata_rx_hash().
+ * @NETDEV_XDP_RX_METADATA_VLAN_TAG: Device is capable of exposing stripped
+ *   receive VLAN tag (proto and TCI) via bpf_xdp_metadata_rx_vlan_tag().
  */
 enum netdev_xdp_rx_metadata {
 	NETDEV_XDP_RX_METADATA_TIMESTAMP = 1,
 	NETDEV_XDP_RX_METADATA_HASH = 2,
+	NETDEV_XDP_RX_METADATA_VLAN_TAG = 4,
 
 	/* private: */
-	NETDEV_XDP_RX_METADATA_MASK = 3,
+	NETDEV_XDP_RX_METADATA_MASK = 7,
 };
 
 enum {
diff --git a/net/core/xdp.c b/net/core/xdp.c
index df4789ab512d..fb87925b3dc3 100644
--- a/net/core/xdp.c
+++ b/net/core/xdp.c
@@ -738,6 +738,39 @@ __bpf_kfunc int bpf_xdp_metadata_rx_hash(const struct xdp_md *ctx, u32 *hash,
 	return -EOPNOTSUPP;
 }
 
+/**
+ * bpf_xdp_metadata_rx_vlan_tag - Get XDP packet outermost VLAN tag
+ * @ctx: XDP context pointer.
+ * @vlan_proto: Destination pointer for VLAN Tag protocol identifier (TPID).
+ * @vlan_tci: Destination pointer for VLAN TCI (VID + DEI + PCP)
+ *
+ * In case of success, ``vlan_proto`` contains *Tag protocol identifier (TPID)*,
+ * usually ``ETH_P_8021Q`` or ``ETH_P_8021AD``, but some networks can use
+ * custom TPIDs. ``vlan_proto`` is stored in **network byte order (BE)**
+ * and should be used as follows:
+ * ``if (vlan_proto == bpf_htons(ETH_P_8021Q)) do_something();``
+ *
+ * ``vlan_tci`` contains the remaining 16 bits of a VLAN tag.
+ * Driver is expected to provide those in **host byte order (usually LE)**,
+ * so the bpf program should not perform byte conversion.
+ * According to 802.1Q standard, *VLAN TCI (Tag control information)*
+ * is a bit field that contains:
+ * *VLAN identifier (VID)* that can be read with ``vlan_tci & 0xfff``,
+ * *Drop eligible indicator (DEI)* - 1 bit,
+ * *Priority code point (PCP)* - 3 bits.
+ * For detailed meaning of DEI and PCP, please refer to other sources.
+ *
+ * Return:
+ * * Returns 0 on success or ``-errno`` on error.
+ * * ``-EOPNOTSUPP`` : device driver doesn't implement kfunc
+ * * ``-ENODATA``    : VLAN tag was not stripped or is not available
+ */
+__bpf_kfunc int bpf_xdp_metadata_rx_vlan_tag(const struct xdp_md *ctx,
+					     __be16 *vlan_proto, u16 *vlan_tci)
+{
+	return -EOPNOTSUPP;
+}
+
 __diag_pop();
 
 BTF_SET8_START(xdp_metadata_kfunc_ids)
diff --git a/tools/include/uapi/linux/netdev.h b/tools/include/uapi/linux/netdev.h
index 2943a151d4f1..661f603e3e43 100644
--- a/tools/include/uapi/linux/netdev.h
+++ b/tools/include/uapi/linux/netdev.h
@@ -44,13 +44,16 @@ enum netdev_xdp_act {
  *   timestamp via bpf_xdp_metadata_rx_timestamp().
  * @NETDEV_XDP_RX_METADATA_HASH: Device is capable of exposing receive packet
  *   hash via bpf_xdp_metadata_rx_hash().
+ * @NETDEV_XDP_RX_METADATA_VLAN_TAG: Device is capable of exposing stripped
+ *   receive VLAN tag (proto and TCI) via bpf_xdp_metadata_rx_vlan_tag().
  */
 enum netdev_xdp_rx_metadata {
 	NETDEV_XDP_RX_METADATA_TIMESTAMP = 1,
 	NETDEV_XDP_RX_METADATA_HASH = 2,
+	NETDEV_XDP_RX_METADATA_VLAN_TAG = 4,
 
 	/* private: */
-	NETDEV_XDP_RX_METADATA_MASK = 3,
+	NETDEV_XDP_RX_METADATA_MASK = 7,
 };
 
 enum {
-- 
2.41.0