From: Lorenzo Bianconi <lorenzo@kernel.org>
To: bpf@vger.kernel.org, netdev@vger.kernel.org
Cc: lorenzo.bianconi@redhat.com, davem@davemloft.net,
kuba@kernel.org, ast@kernel.org, daniel@iogearbox.net,
shayagr@amazon.com, john.fastabend@gmail.com, dsahern@kernel.org,
brouer@redhat.com, echaudro@redhat.com, jasowang@redhat.com,
alexander.duyck@gmail.com, saeed@kernel.org,
maciej.fijalkowski@intel.com, magnus.karlsson@intel.com,
tirthendu.sarkar@intel.com, toke@redhat.com
Subject: [PATCH v12 bpf-next 05/18] net: xdp: add xdp_update_skb_shared_info utility routine
Date: Fri, 20 Aug 2021 17:40:18 +0200 [thread overview]
Message-ID: <3d98cda6f49ef9ff34d2aec3d00924592b4739e3.1629473233.git.lorenzo@kernel.org> (raw)
In-Reply-To: <cover.1629473233.git.lorenzo@kernel.org>
Introduce xdp_update_skb_shared_info routine to update frags array
metadata in skb_shared_info data structure converting to a skb from
a xdp_buff or xdp_frame.
According to the current skb_shared_info architecture in
xdp_frame/xdp_buff and to the xdp multi-buff support, there is
no need to run skb_add_rx_frag() and reset frags array converting the buffer
to a skb since the frag array will be in the same position for xdp_buff/xdp_frame
and for the skb, we just need to update memory metadata.
Introduce XDP_FLAGS_PF_MEMALLOC flag in xdp_buff_flags in order to mark
the xdp_buff or xdp_frame as under memory-pressure if pages of the frags array
are under memory pressure. Doing so we can avoid looping over all fragments in
xdp_update_skb_shared_info routine. The driver is expected to set the
flag constructing the xdp_buffer using xdp_buff_set_frag_pfmemalloc
utility routine.
Rely on xdp_update_skb_shared_info in __xdp_build_skb_from_frame routine
converting the multi-buff xdp_frame to a skb after performing a XDP_REDIRECT.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
include/net/xdp.h | 33 ++++++++++++++++++++++++++++++++-
net/core/xdp.c | 17 +++++++++++++++++
2 files changed, 49 insertions(+), 1 deletion(-)
diff --git a/include/net/xdp.h b/include/net/xdp.h
index ed5ea784fd45..53cccdc9528c 100644
--- a/include/net/xdp.h
+++ b/include/net/xdp.h
@@ -67,7 +67,10 @@ struct xdp_txq_info {
};
enum xdp_buff_flags {
- XDP_FLAGS_MULTI_BUFF = BIT(0), /* non-linear xdp buff */
+ XDP_FLAGS_MULTI_BUFF = BIT(0), /* non-linear xdp buff */
+ XDP_FLAGS_FRAGS_PF_MEMALLOC = BIT(1), /* xdp multi-buff paged memory
+ * is under pressure
+ */
};
struct xdp_buff {
@@ -96,6 +99,16 @@ static __always_inline void xdp_buff_clear_mb(struct xdp_buff *xdp)
xdp->flags &= ~XDP_FLAGS_MULTI_BUFF;
}
+static __always_inline bool xdp_buff_is_frag_pfmemalloc(struct xdp_buff *xdp)
+{
+ return !!(xdp->flags & XDP_FLAGS_FRAGS_PF_MEMALLOC);
+}
+
+static __always_inline void xdp_buff_set_frag_pfmemalloc(struct xdp_buff *xdp)
+{
+ xdp->flags |= XDP_FLAGS_FRAGS_PF_MEMALLOC;
+}
+
static __always_inline void
xdp_init_buff(struct xdp_buff *xdp, u32 frame_sz, struct xdp_rxq_info *rxq)
{
@@ -151,6 +164,11 @@ static __always_inline bool xdp_frame_is_mb(struct xdp_frame *frame)
return !!(frame->flags & XDP_FLAGS_MULTI_BUFF);
}
+static __always_inline bool xdp_frame_is_frag_pfmemalloc(struct xdp_frame *frame)
+{
+ return !!(frame->flags & XDP_FLAGS_FRAGS_PF_MEMALLOC);
+}
+
#define XDP_BULK_QUEUE_SIZE 16
struct xdp_frame_bulk {
int count;
@@ -186,6 +204,19 @@ static inline void xdp_scrub_frame(struct xdp_frame *frame)
frame->dev_rx = NULL;
}
+static inline void
+xdp_update_skb_shared_info(struct sk_buff *skb, u8 nr_frags,
+ unsigned int size, unsigned int truesize,
+ bool pfmemalloc)
+{
+ skb_shinfo(skb)->nr_frags = nr_frags;
+
+ skb->len += size;
+ skb->data_len += size;
+ skb->truesize += truesize;
+ skb->pfmemalloc |= pfmemalloc;
+}
+
/* Avoids inlining WARN macro in fast-path */
void xdp_warn(const char *msg, const char *func, const int line);
#define XDP_WARN(msg) xdp_warn(msg, __func__, __LINE__)
diff --git a/net/core/xdp.c b/net/core/xdp.c
index cc92ccb38432..504be3ce3ca9 100644
--- a/net/core/xdp.c
+++ b/net/core/xdp.c
@@ -531,8 +531,20 @@ struct sk_buff *__xdp_build_skb_from_frame(struct xdp_frame *xdpf,
struct sk_buff *skb,
struct net_device *dev)
{
+ unsigned int frag_size, frag_tsize;
unsigned int headroom, frame_size;
void *hard_start;
+ u8 nr_frags;
+
+ /* xdp multi-buff frame */
+ if (unlikely(xdp_frame_is_mb(xdpf))) {
+ struct skb_shared_info *sinfo;
+
+ sinfo = xdp_get_shared_info_from_frame(xdpf);
+ frag_tsize = sinfo->xdp_frags_tsize;
+ frag_size = sinfo->xdp_frags_size;
+ nr_frags = sinfo->nr_frags;
+ }
/* Part of headroom was reserved to xdpf */
headroom = sizeof(*xdpf) + xdpf->headroom;
@@ -552,6 +564,11 @@ struct sk_buff *__xdp_build_skb_from_frame(struct xdp_frame *xdpf,
if (xdpf->metasize)
skb_metadata_set(skb, xdpf->metasize);
+ if (unlikely(xdp_frame_is_mb(xdpf)))
+ xdp_update_skb_shared_info(skb, nr_frags,
+ frag_size, frag_tsize,
+ xdp_frame_is_frag_pfmemalloc(xdpf));
+
/* Essential SKB info: protocol and skb->dev */
skb->protocol = eth_type_trans(skb, dev);
--
2.31.1
next prev parent reply other threads:[~2021-08-20 15:43 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-20 15:40 [PATCH v12 bpf-next 00/18] mvneta: introduce XDP multi-buffer support Lorenzo Bianconi
2021-08-20 15:40 ` [PATCH v12 bpf-next 01/18] net: skbuff: add size metadata to skb_shared_info for xdp Lorenzo Bianconi
2021-08-31 23:13 ` John Fastabend
2021-09-03 17:13 ` Lorenzo Bianconi
2021-08-20 15:40 ` [PATCH v12 bpf-next 02/18] xdp: introduce flags field in xdp_buff/xdp_frame Lorenzo Bianconi
2021-08-31 23:15 ` John Fastabend
2021-08-20 15:40 ` [PATCH v12 bpf-next 03/18] net: mvneta: update mb bit before passing the xdp buffer to eBPF layer Lorenzo Bianconi
2021-08-31 23:23 ` John Fastabend
2021-09-03 17:23 ` Lorenzo Bianconi
2021-08-20 15:40 ` [PATCH v12 bpf-next 04/18] net: mvneta: simplify mvneta_swbm_add_rx_fragment management Lorenzo Bianconi
2021-08-31 23:34 ` John Fastabend
2021-08-20 15:40 ` Lorenzo Bianconi [this message]
2021-08-31 23:38 ` [PATCH v12 bpf-next 05/18] net: xdp: add xdp_update_skb_shared_info utility routine John Fastabend
2021-08-20 15:40 ` [PATCH v12 bpf-next 06/18] net: marvell: rely on " Lorenzo Bianconi
2021-08-31 23:41 ` John Fastabend
2021-09-03 17:27 ` Lorenzo Bianconi
2021-08-20 15:40 ` [PATCH v12 bpf-next 07/18] xdp: add multi-buff support to xdp_return_{buff/frame} Lorenzo Bianconi
2021-08-31 23:43 ` John Fastabend
2021-08-20 15:40 ` [PATCH v12 bpf-next 08/18] net: mvneta: add multi buffer support to XDP_TX Lorenzo Bianconi
2021-08-31 23:44 ` John Fastabend
2021-08-20 15:40 ` [PATCH v12 bpf-next 09/18] net: mvneta: enable jumbo frames for XDP Lorenzo Bianconi
2021-08-31 23:45 ` John Fastabend
2021-08-20 15:40 ` [PATCH v12 bpf-next 10/18] bpf: add multi-buff support to the bpf_xdp_adjust_tail() API Lorenzo Bianconi
2021-09-01 0:10 ` John Fastabend
2021-08-20 15:40 ` [PATCH v12 bpf-next 11/18] bpf: introduce bpf_xdp_get_buff_len helper Lorenzo Bianconi
2021-09-01 0:12 ` John Fastabend
2021-08-20 15:40 ` [PATCH v12 bpf-next 12/18] bpf: add multi-buffer support to xdp copy helpers Lorenzo Bianconi
2021-09-01 0:19 ` John Fastabend
2021-08-20 15:40 ` [PATCH v12 bpf-next 13/18] bpf: move user_size out of bpf_test_init Lorenzo Bianconi
2021-08-20 15:40 ` [PATCH v12 bpf-next 14/18] bpf: introduce multibuff support to bpf_prog_test_run_xdp() Lorenzo Bianconi
2021-08-20 15:40 ` [PATCH v12 bpf-next 15/18] bpf: test_run: add xdp_shared_info pointer in bpf_test_finish signature Lorenzo Bianconi
2021-08-20 15:40 ` [PATCH v12 bpf-next 16/18] bpf: update xdp_adjust_tail selftest to include multi-buffer Lorenzo Bianconi
2021-08-20 15:40 ` [PATCH v12 bpf-next 17/18] net: xdp: introduce bpf_xdp_adjust_data helper Lorenzo Bianconi
2021-09-01 0:36 ` John Fastabend
2021-09-03 17:57 ` Lorenzo Bianconi
2021-08-20 15:40 ` [PATCH v12 bpf-next 18/18] bpf: add bpf_xdp_adjust_data selftest Lorenzo Bianconi
2021-09-01 0:45 ` [PATCH v12 bpf-next 00/18] mvneta: introduce XDP multi-buffer support John Fastabend
2021-09-07 8:35 ` Lorenzo Bianconi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3d98cda6f49ef9ff34d2aec3d00924592b4739e3.1629473233.git.lorenzo@kernel.org \
--to=lorenzo@kernel.org \
--cc=alexander.duyck@gmail.com \
--cc=ast@kernel.org \
--cc=bpf@vger.kernel.org \
--cc=brouer@redhat.com \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=dsahern@kernel.org \
--cc=echaudro@redhat.com \
--cc=jasowang@redhat.com \
--cc=john.fastabend@gmail.com \
--cc=kuba@kernel.org \
--cc=lorenzo.bianconi@redhat.com \
--cc=maciej.fijalkowski@intel.com \
--cc=magnus.karlsson@intel.com \
--cc=netdev@vger.kernel.org \
--cc=saeed@kernel.org \
--cc=shayagr@amazon.com \
--cc=tirthendu.sarkar@intel.com \
--cc=toke@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).