* [PATCH bpf-next v4 0/5] selftests/bpf: xsk selftests
@ 2020-12-07 21:53 Weqaar Janjua
2020-12-07 21:53 ` [PATCH bpf-next v4 1/5] selftests/bpf: xsk selftests framework Weqaar Janjua
` (6 more replies)
0 siblings, 7 replies; 11+ messages in thread
From: Weqaar Janjua @ 2020-12-07 21:53 UTC (permalink / raw)
To: bpf, netdev, daniel, ast, yhs, magnus.karlsson, bjorn.topel
Cc: Weqaar Janjua, shuah, skhan, linux-kselftest, anders.roxell,
jonathan.lemon
This patch set adds AF_XDP selftests based on veth to selftests/bpf.
# Topology:
# ---------
# -----------
# _ | Process | _
# / ----------- \
# / | \
# / | \
# ----------- | -----------
# | Thread1 | | | Thread2 |
# ----------- | -----------
# | | |
# ----------- | -----------
# | xskX | | | xskY |
# ----------- | -----------
# | | |
# ----------- | ----------
# | vethX | --------- | vethY |
# ----------- peer ----------
# | | |
# namespaceX | namespaceY
These selftests test AF_XDP SKB and Native/DRV modes using veth Virtual
Ethernet interfaces.
The test program contains two threads, each thread is single socket with
a unique UMEM. It validates in-order packet delivery and packet content
by sending packets to each other.
Prerequisites setup by script test_xsk.sh:
Set up veth interfaces as per the topology shown ^^:
* setup two veth interfaces and one namespace
** veth<xxxx> in root namespace
** veth<yyyy> in af_xdp<xxxx> namespace
** namespace af_xdp<xxxx>
* create a spec file veth.spec that includes this run-time configuration
*** xxxx and yyyy are randomly generated 4 digit numbers used to avoid
conflict with any existing interface
Adds xsk framework test to validate veth xdp DRV and SKB modes.
The following tests are provided:
1. AF_XDP SKB mode
Generic mode XDP is driver independent, used when the driver does
not have support for XDP. Works on any netdevice using sockets and
generic XDP path. XDP hook from netif_receive_skb().
a. nopoll - soft-irq processing
b. poll - using poll() syscall
c. Socket Teardown
Create a Tx and a Rx socket, Tx from one socket, Rx on another.
Destroy both sockets, then repeat multiple times. Only nopoll mode
is used
d. Bi-directional Sockets
Configure sockets as bi-directional tx/rx sockets, sets up fill
and completion rings on each socket, tx/rx in both directions.
Only nopoll mode is used
2. AF_XDP DRV/Native mode
Works on any netdevice with XDP_REDIRECT support, driver dependent.
Processes packets before SKB allocation. Provides better performance
than SKB. Driver hook available just after DMA of buffer descriptor.
a. nopoll
b. poll
c. Socket Teardown
d. Bi-directional Sockets
* Only copy mode is supported because veth does not currently support
zero-copy mode
Total tests: 8
Flow:
* Single process spawns two threads: Tx and Rx
* Each of these two threads attach to a veth interface within their
assigned namespaces
* Each thread creates one AF_XDP socket connected to a unique umem
for each veth interface
* Tx thread transmits 10k packets from veth<xxxx> to veth<yyyy>
* Rx thread verifies if all 10k packets were received and delivered
in-order, and have the right content
v2 changes:
* Move selftests/xsk to selftests/bpf
* Remove Makefiles under selftests/xsk, and utilize selftests/bpf/Makefile
v3 changes:
* merge all test scripts test_xsk_*.sh into test_xsk.sh
v4 changes:
* merge xsk_env.sh into xsk_prereqs.sh
* test_xsk.sh add cliarg -c for color-coded output
* test_xsk.sh PREREQUISITES disables IPv6 on veth interfaces
* test_xsk.sh PREREQUISITES adds xsk framework test
* test_xsk.sh is independently executable
* xdpxceiver.c Tx/Rx validates only IPv4 packets with TOS 0x9, ignores
others
Structure of the patch set:
Patch 1: Adds XSK selftests framework and test under selftests/bpf
Patch 2: Adds tests: SKB poll and nopoll mode, and mac-ip-udp debug
Patch 3: Adds tests: DRV poll and nopoll mode
Patch 4: Adds tests: SKB and DRV Socket Teardown
Patch 5: Adds tests: SKB and DRV Bi-directional Sockets
Thanks: Weqaar
Weqaar Janjua (5):
selftests/bpf: xsk selftests framework
selftests/bpf: xsk selftests - SKB POLL, NOPOLL
selftests/bpf: xsk selftests - DRV POLL, NOPOLL
selftests/bpf: xsk selftests - Socket Teardown - SKB, DRV
selftests/bpf: xsk selftests - Bi-directional Sockets - SKB, DRV
tools/testing/selftests/bpf/Makefile | 7 +-
tools/testing/selftests/bpf/test_xsk.sh | 259 +++++
tools/testing/selftests/bpf/xdpxceiver.c | 1074 ++++++++++++++++++++
tools/testing/selftests/bpf/xdpxceiver.h | 160 +++
tools/testing/selftests/bpf/xsk_prereqs.sh | 135 +++
5 files changed, 1633 insertions(+), 2 deletions(-)
create mode 100755 tools/testing/selftests/bpf/test_xsk.sh
create mode 100644 tools/testing/selftests/bpf/xdpxceiver.c
create mode 100644 tools/testing/selftests/bpf/xdpxceiver.h
create mode 100755 tools/testing/selftests/bpf/xsk_prereqs.sh
--
2.20.1
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH bpf-next v4 1/5] selftests/bpf: xsk selftests framework
2020-12-07 21:53 [PATCH bpf-next v4 0/5] selftests/bpf: xsk selftests Weqaar Janjua
@ 2020-12-07 21:53 ` Weqaar Janjua
2020-12-07 21:53 ` [PATCH bpf-next v4 2/5] selftests/bpf: xsk selftests - SKB POLL, NOPOLL Weqaar Janjua
` (5 subsequent siblings)
6 siblings, 0 replies; 11+ messages in thread
From: Weqaar Janjua @ 2020-12-07 21:53 UTC (permalink / raw)
To: bpf, netdev, daniel, ast, yhs, magnus.karlsson, bjorn.topel
Cc: Weqaar Janjua, shuah, skhan, linux-kselftest, anders.roxell,
jonathan.lemon
This patch adds AF_XDP selftests framework under selftests/bpf.
Topology:
---------
----------- -----------
| xskX | --------- | xskY |
----------- | -----------
| | |
----------- | ----------
| vethX | --------- | vethY |
----------- peer ----------
| | |
namespaceX | namespaceY
Prerequisites setup by script test_xsk.sh:
Set up veth interfaces as per the topology shown ^^:
* setup two veth interfaces and one namespace
** veth<xxxx> in root namespace
** veth<yyyy> in af_xdp<xxxx> namespace
** namespace af_xdp<xxxx>
* create a spec file veth.spec that includes this run-time configuration
*** xxxx and yyyy are randomly generated 4 digit numbers used to avoid
conflict with any existing interface
* tests the veth and xsk layers of the topology
Signed-off-by: Weqaar Janjua <weqaar.a.janjua@intel.com>
---
tools/testing/selftests/bpf/Makefile | 4 +-
tools/testing/selftests/bpf/test_xsk.sh | 152 +++++++++++++++++++++
tools/testing/selftests/bpf/xsk_prereqs.sh | 119 ++++++++++++++++
3 files changed, 274 insertions(+), 1 deletion(-)
create mode 100755 tools/testing/selftests/bpf/test_xsk.sh
create mode 100755 tools/testing/selftests/bpf/xsk_prereqs.sh
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index ac25ba5d0d6c..6a1ddfe68f15 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -46,7 +46,8 @@ endif
TEST_GEN_FILES =
TEST_FILES = test_lwt_ip_encap.o \
- test_tc_edt.o
+ test_tc_edt.o \
+ xsk_prereqs.sh
# Order correspond to 'make run_tests' order
TEST_PROGS := test_kmod.sh \
@@ -70,6 +71,7 @@ TEST_PROGS := test_kmod.sh \
test_bpftool_build.sh \
test_bpftool.sh \
test_bpftool_metadata.sh \
+ test_xsk.sh
TEST_PROGS_EXTENDED := with_addr.sh \
with_tunnels.sh \
diff --git a/tools/testing/selftests/bpf/test_xsk.sh b/tools/testing/selftests/bpf/test_xsk.sh
new file mode 100755
index 000000000000..cae4c5574c4c
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_xsk.sh
@@ -0,0 +1,152 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright(c) 2020 Intel Corporation, Weqaar Janjua <weqaar.a.janjua@intel.com>
+
+# AF_XDP selftests based on veth
+#
+# End-to-end AF_XDP over Veth test
+#
+# Topology:
+# ---------
+# ----------- -----------
+# | xskX | --------- | xskY |
+# ----------- | -----------
+# | | |
+# ----------- | ----------
+# | vethX | --------- | vethY |
+# ----------- peer ----------
+# | | |
+# namespaceX | namespaceY
+#
+# AF_XDP is an address family optimized for high performance packet processing,
+# it is XDP’s user-space interface.
+#
+# An AF_XDP socket is linked to a single UMEM which is a region of virtual
+# contiguous memory, divided into equal-sized frames.
+#
+# Refer to AF_XDP Kernel Documentation for detailed information:
+# https://www.kernel.org/doc/html/latest/networking/af_xdp.html
+#
+# Prerequisites setup by script:
+#
+# Set up veth interfaces as per the topology shown ^^:
+# * setup two veth interfaces and one namespace
+# ** veth<xxxx> in root namespace
+# ** veth<yyyy> in af_xdp<xxxx> namespace
+# ** namespace af_xdp<xxxx>
+# * create a spec file veth.spec that includes this run-time configuration
+# *** xxxx and yyyy are randomly generated 4 digit numbers used to avoid
+# conflict with any existing interface
+# * tests the veth and xsk layers of the topology
+#
+# Kernel configuration:
+# ---------------------
+# See "config" file for recommended kernel config options.
+#
+# Turn on XDP sockets and veth support when compiling i.e.
+# Networking support -->
+# Networking options -->
+# [ * ] XDP sockets
+#
+# Executing Tests:
+# ----------------
+# Must run with CAP_NET_ADMIN capability.
+#
+# Run (full color-coded output):
+# sudo ./test_xsk.sh -c
+#
+# If running from kselftests:
+# sudo make colorconsole=1 run_tests
+#
+# Run (full output without color-coding):
+# sudo ./test_xsk.sh
+
+. xsk_prereqs.sh
+
+while getopts c flag
+do
+ case "${flag}" in
+ c) colorconsole=1;;
+ esac
+done
+
+TEST_NAME="PREREQUISITES"
+
+URANDOM=/dev/urandom
+[ ! -e "${URANDOM}" ] && { echo "${URANDOM} not found. Skipping tests."; test_exit 1 1; }
+
+VETH0_POSTFIX=$(cat ${URANDOM} | tr -dc '0-9' | fold -w 256 | head -n 1 | head --bytes 4)
+VETH0=ve${VETH0_POSTFIX}
+VETH1_POSTFIX=$(cat ${URANDOM} | tr -dc '0-9' | fold -w 256 | head -n 1 | head --bytes 4)
+VETH1=ve${VETH1_POSTFIX}
+NS0=root
+NS1=af_xdp${VETH1_POSTFIX}
+MTU=1500
+
+setup_vethPairs() {
+ echo "setting up ${VETH0}: namespace: ${NS0}"
+ ip netns add ${NS1}
+ ip link add ${VETH0} type veth peer name ${VETH1}
+ if [ -f /proc/net/if_inet6 ]; then
+ echo 1 > /proc/sys/net/ipv6/conf/${VETH0}/disable_ipv6
+ fi
+ echo "setting up ${VETH1}: namespace: ${NS1}"
+ ip link set ${VETH1} netns ${NS1}
+ ip netns exec ${NS1} ip link set ${VETH1} mtu ${MTU}
+ ip link set ${VETH0} mtu ${MTU}
+ ip netns exec ${NS1} ip link set ${VETH1} up
+ ip link set ${VETH0} up
+}
+
+validate_root_exec
+validate_veth_support ${VETH0}
+validate_ip_utility
+setup_vethPairs
+
+retval=$?
+if [ $retval -ne 0 ]; then
+ test_status $retval "${TEST_NAME}"
+ cleanup_exit ${VETH0} ${VETH1} ${NS1}
+ exit $retval
+fi
+
+echo "${VETH0}:${VETH1},${NS1}" > ${SPECFILE}
+
+validate_veth_spec_file
+
+echo "Spec file created: ${SPECFILE}"
+
+test_status $retval "${TEST_NAME}"
+
+## START TESTS
+
+statusList=()
+
+### TEST 1
+TEST_NAME="XSK KSELFTEST FRAMEWORK"
+
+echo "Switching interfaces [${VETH0}, ${VETH1}] to XDP Generic mode"
+vethXDPgeneric ${VETH0} ${VETH1} ${NS1}
+
+retval=$?
+if [ $retval -eq 0 ]; then
+ echo "Switching interfaces [${VETH0}, ${VETH1}] to XDP Native mode"
+ vethXDPnative ${VETH0} ${VETH1} ${NS1}
+fi
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
+## END TESTS
+
+cleanup_exit ${VETH0} ${VETH1} ${NS1}
+
+for _status in "${statusList[@]}"
+do
+ if [ $_status -ne 0 ]; then
+ test_exit $ksft_fail 0
+ fi
+done
+
+test_exit $ksft_pass 0
diff --git a/tools/testing/selftests/bpf/xsk_prereqs.sh b/tools/testing/selftests/bpf/xsk_prereqs.sh
new file mode 100755
index 000000000000..29762739c21b
--- /dev/null
+++ b/tools/testing/selftests/bpf/xsk_prereqs.sh
@@ -0,0 +1,119 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright(c) 2020 Intel Corporation.
+
+ksft_pass=0
+ksft_fail=1
+ksft_xfail=2
+ksft_xpass=3
+ksft_skip=4
+
+GREEN='\033[0;92m'
+YELLOW='\033[0;93m'
+RED='\033[0;31m'
+NC='\033[0m'
+STACK_LIM=131072
+SPECFILE=veth.spec
+
+validate_root_exec()
+{
+ msg="skip all tests:"
+ if [ $UID != 0 ]; then
+ echo $msg must be run as root >&2
+ test_exit $ksft_fail 2
+ else
+ return $ksft_pass
+ fi
+}
+
+validate_veth_support()
+{
+ msg="skip all tests:"
+ if [ $(ip link add $1 type veth 2>/dev/null; echo $?;) != 0 ]; then
+ echo $msg veth kernel support not available >&2
+ test_exit $ksft_skip 1
+ else
+ ip link del $1
+ return $ksft_pass
+ fi
+}
+
+validate_veth_spec_file()
+{
+ if [ ! -f ${SPECFILE} ]; then
+ test_exit $ksft_skip 1
+ fi
+}
+
+test_status()
+{
+ statusval=$1
+ if [ -n "${colorconsole+set}" ]; then
+ if [ $statusval -eq 2 ]; then
+ echo -e "${YELLOW}$2${NC}: [ ${RED}FAIL${NC} ]"
+ elif [ $statusval -eq 1 ]; then
+ echo -e "${YELLOW}$2${NC}: [ ${RED}SKIPPED${NC} ]"
+ elif [ $statusval -eq 0 ]; then
+ echo -e "${YELLOW}$2${NC}: [ ${GREEN}PASS${NC} ]"
+ fi
+ else
+ if [ $statusval -eq 2 ]; then
+ echo -e "$2: [ FAIL ]"
+ elif [ $statusval -eq 1 ]; then
+ echo -e "$2: [ SKIPPED ]"
+ elif [ $statusval -eq 0 ]; then
+ echo -e "$2: [ PASS ]"
+ fi
+ fi
+}
+
+test_exit()
+{
+ retval=$1
+ if [ $2 -ne 0 ]; then
+ test_status $2 $(basename $0)
+ fi
+ exit $retval
+}
+
+clear_configs()
+{
+ if [ $(ip netns show | grep $3 &>/dev/null; echo $?;) == 0 ]; then
+ [ $(ip netns exec $3 ip link show $2 &>/dev/null; echo $?;) == 0 ] &&
+ { echo "removing link $1:$2"; ip netns exec $3 ip link del $2; }
+ echo "removing ns $3"
+ ip netns del $3
+ fi
+ #Once we delete a veth pair node, the entire veth pair is removed,
+ #this is just to be cautious just incase the NS does not exist then
+ #veth node inside NS won't get removed so we explicitly remove it
+ [ $(ip link show $1 &>/dev/null; echo $?;) == 0 ] &&
+ { echo "removing link $1"; ip link del $1; }
+ if [ -f ${SPECFILE} ]; then
+ echo "removing spec file:" ${SPECFILE}
+ rm -f ${SPECFILE}
+ fi
+}
+
+cleanup_exit()
+{
+ echo "cleaning up..."
+ clear_configs $1 $2 $3
+}
+
+validate_ip_utility()
+{
+ [ ! $(type -P ip) ] && { echo "'ip' not found. Skipping tests."; test_exit $ksft_skip 1; }
+}
+
+vethXDPgeneric()
+{
+ ip link set dev $1 xdpdrv off
+ ip netns exec $3 ip link set dev $2 xdpdrv off
+}
+
+vethXDPnative()
+{
+ ip link set dev $1 xdpgeneric off
+ ip netns exec $3 ip link set dev $2 xdpgeneric off
+}
--
2.20.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH bpf-next v4 2/5] selftests/bpf: xsk selftests - SKB POLL, NOPOLL
2020-12-07 21:53 [PATCH bpf-next v4 0/5] selftests/bpf: xsk selftests Weqaar Janjua
2020-12-07 21:53 ` [PATCH bpf-next v4 1/5] selftests/bpf: xsk selftests framework Weqaar Janjua
@ 2020-12-07 21:53 ` Weqaar Janjua
2020-12-09 18:29 ` Yonghong Song
2020-12-07 21:53 ` [PATCH bpf-next v4 3/5] selftests/bpf: xsk selftests - DRV " Weqaar Janjua
` (4 subsequent siblings)
6 siblings, 1 reply; 11+ messages in thread
From: Weqaar Janjua @ 2020-12-07 21:53 UTC (permalink / raw)
To: bpf, netdev, daniel, ast, yhs, magnus.karlsson, bjorn.topel
Cc: Weqaar Janjua, shuah, skhan, linux-kselftest, anders.roxell,
jonathan.lemon
Adds following tests:
1. AF_XDP SKB mode
Generic mode XDP is driver independent, used when the driver does
not have support for XDP. Works on any netdevice using sockets and
generic XDP path. XDP hook from netif_receive_skb().
a. nopoll - soft-irq processing
b. poll - using poll() syscall
Signed-off-by: Weqaar Janjua <weqaar.a.janjua@intel.com>
---
tools/testing/selftests/bpf/Makefile | 3 +-
tools/testing/selftests/bpf/test_xsk.sh | 39 +-
tools/testing/selftests/bpf/xdpxceiver.c | 979 +++++++++++++++++++++
tools/testing/selftests/bpf/xdpxceiver.h | 153 ++++
tools/testing/selftests/bpf/xsk_prereqs.sh | 16 +
5 files changed, 1187 insertions(+), 3 deletions(-)
create mode 100644 tools/testing/selftests/bpf/xdpxceiver.c
create mode 100644 tools/testing/selftests/bpf/xdpxceiver.h
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 6a1ddfe68f15..944ae17a39ed 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -82,7 +82,8 @@ TEST_PROGS_EXTENDED := with_addr.sh \
# Compile but not part of 'make run_tests'
TEST_GEN_PROGS_EXTENDED = test_sock_addr test_skb_cgroup_id_user \
flow_dissector_load test_flow_dissector test_tcp_check_syncookie_user \
- test_lirc_mode2_user xdping test_cpp runqslower bench bpf_testmod.ko
+ test_lirc_mode2_user xdping test_cpp runqslower bench bpf_testmod.ko \
+ xdpxceiver
TEST_CUSTOM_PROGS = urandom_read
diff --git a/tools/testing/selftests/bpf/test_xsk.sh b/tools/testing/selftests/bpf/test_xsk.sh
index cae4c5574c4c..0b7bafb65f43 100755
--- a/tools/testing/selftests/bpf/test_xsk.sh
+++ b/tools/testing/selftests/bpf/test_xsk.sh
@@ -8,8 +8,17 @@
#
# Topology:
# ---------
-# ----------- -----------
-# | xskX | --------- | xskY |
+# -----------
+# _ | Process | _
+# / ----------- \
+# / | \
+# / | \
+# ----------- | -----------
+# | Thread1 | | | Thread2 |
+# ----------- | -----------
+# | | |
+# ----------- | -----------
+# | xskX | | | xskY |
# ----------- | -----------
# | | |
# ----------- | ----------
@@ -39,6 +48,8 @@
# conflict with any existing interface
# * tests the veth and xsk layers of the topology
#
+# See the source xdpxceiver.c for information on each test
+#
# Kernel configuration:
# ---------------------
# See "config" file for recommended kernel config options.
@@ -138,6 +149,30 @@ retval=$?
test_status $retval "${TEST_NAME}"
statusList+=($retval)
+### TEST 2
+TEST_NAME="SKB NOPOLL"
+
+vethXDPgeneric ${VETH0} ${VETH1} ${NS1}
+
+params=("-S")
+execxdpxceiver params
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
+### TEST 3
+TEST_NAME="SKB POLL"
+
+vethXDPgeneric ${VETH0} ${VETH1} ${NS1}
+
+params=("-S" "-p")
+execxdpxceiver params
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
## END TESTS
cleanup_exit ${VETH0} ${VETH1} ${NS1}
diff --git a/tools/testing/selftests/bpf/xdpxceiver.c b/tools/testing/selftests/bpf/xdpxceiver.c
new file mode 100644
index 000000000000..3f2a65b6a9f5
--- /dev/null
+++ b/tools/testing/selftests/bpf/xdpxceiver.c
@@ -0,0 +1,979 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 2020 Intel Corporation. */
+
+/*
+ * Some functions in this program are taken from
+ * Linux kernel samples/bpf/xdpsock* and modified
+ * for use.
+ *
+ * See test_xsk.sh for detailed information on test topology
+ * and prerequisite network setup.
+ *
+ * This test program contains two threads, each thread is single socket with
+ * a unique UMEM. It validates in-order packet delivery and packet content
+ * by sending packets to each other.
+ *
+ * Tests Information:
+ * ------------------
+ * These selftests test AF_XDP SKB and Native/DRV modes using veth
+ * Virtual Ethernet interfaces.
+ *
+ * The following tests are run:
+ *
+ * 1. AF_XDP SKB mode
+ * Generic mode XDP is driver independent, used when the driver does
+ * not have support for XDP. Works on any netdevice using sockets and
+ * generic XDP path. XDP hook from netif_receive_skb().
+ * a. nopoll - soft-irq processing
+ * b. poll - using poll() syscall
+ *
+ * Total tests: 2
+ *
+ * Flow:
+ * -----
+ * - Single process spawns two threads: Tx and Rx
+ * - Each of these two threads attach to a veth interface within their assigned
+ * namespaces
+ * - Each thread Creates one AF_XDP socket connected to a unique umem for each
+ * veth interface
+ * - Tx thread Transmits 10k packets from veth<xxxx> to veth<yyyy>
+ * - Rx thread verifies if all 10k packets were received and delivered in-order,
+ * and have the right content
+ *
+ * Enable/disable debug mode:
+ * --------------------------
+ * To enable L2 - L4 headers and payload dump of each packet on STDOUT, add
+ * parameter -D to params array in test_xsk.sh, i.e. params=("-S" "-D")
+ */
+
+#define _GNU_SOURCE
+#include <fcntl.h>
+#include <errno.h>
+#include <getopt.h>
+#include <asm/barrier.h>
+typedef __u16 __sum16;
+#include <linux/if_link.h>
+#include <linux/if_ether.h>
+#include <linux/ip.h>
+#include <linux/udp.h>
+#include <arpa/inet.h>
+#include <net/if.h>
+#include <locale.h>
+#include <poll.h>
+#include <pthread.h>
+#include <signal.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stddef.h>
+#include <sys/mman.h>
+#include <sys/resource.h>
+#include <sys/types.h>
+#include <sys/queue.h>
+#include <time.h>
+#include <unistd.h>
+#include <stdatomic.h>
+#include <bpf/xsk.h>
+#include "xdpxceiver.h"
+#include "../kselftest.h"
+
+static void __exit_with_error(int error, const char *file, const char *func, int line)
+{
+ ksft_test_result_fail
+ ("[%s:%s:%i]: ERROR: %d/\"%s\"\n", file, func, line, error, strerror(error));
+ ksft_exit_xfail();
+}
+
+#define exit_with_error(error) __exit_with_error(error, __FILE__, __func__, __LINE__)
+
+#define print_ksft_result(void)\
+ (ksft_test_result_pass("PASS: %s %s\n", uut ? "" : "SKB", opt_poll ? "POLL" : "NOPOLL"))
+
+static void pthread_init_mutex(void)
+{
+ pthread_mutex_init(&sync_mutex, NULL);
+ pthread_mutex_init(&sync_mutex_tx, NULL);
+ pthread_cond_init(&signal_rx_condition, NULL);
+ pthread_cond_init(&signal_tx_condition, NULL);
+}
+
+static void pthread_destroy_mutex(void)
+{
+ pthread_mutex_destroy(&sync_mutex);
+ pthread_mutex_destroy(&sync_mutex_tx);
+ pthread_cond_destroy(&signal_rx_condition);
+ pthread_cond_destroy(&signal_tx_condition);
+}
+
+static void *memset32_htonl(void *dest, u32 val, u32 size)
+{
+ u32 *ptr = (u32 *)dest;
+ int i;
+
+ val = htonl(val);
+
+ for (i = 0; i < (size & (~0x3)); i += 4)
+ ptr[i >> 2] = val;
+
+ for (; i < size; i++)
+ ((char *)dest)[i] = ((char *)&val)[i & 3];
+
+ return dest;
+}
+
+/*
+ * This function code has been taken from
+ * Linux kernel lib/checksum.c
+ */
+static inline unsigned short from32to16(unsigned int x)
+{
+ /* add up 16-bit and 16-bit for 16+c bit */
+ x = (x & 0xffff) + (x >> 16);
+ /* add up carry.. */
+ x = (x & 0xffff) + (x >> 16);
+ return x;
+}
+
+/*
+ * Fold a partial checksum
+ * This function code has been taken from
+ * Linux kernel include/asm-generic/checksum.h
+ */
+static inline __u16 csum_fold(__u32 csum)
+{
+ u32 sum = (__force u32)csum;
+
+ sum = (sum & 0xffff) + (sum >> 16);
+ sum = (sum & 0xffff) + (sum >> 16);
+ return (__force __u16)~sum;
+}
+
+/*
+ * This function code has been taken from
+ * Linux kernel lib/checksum.c
+ */
+static inline u32 from64to32(u64 x)
+{
+ /* add up 32-bit and 32-bit for 32+c bit */
+ x = (x & 0xffffffff) + (x >> 32);
+ /* add up carry.. */
+ x = (x & 0xffffffff) + (x >> 32);
+ return (u32)x;
+}
+
+__u32 csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len, __u8 proto, __u32 sum);
+
+/*
+ * This function code has been taken from
+ * Linux kernel lib/checksum.c
+ */
+__u32 csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len, __u8 proto, __u32 sum)
+{
+ unsigned long long s = (__force u32)sum;
+
+ s += (__force u32)saddr;
+ s += (__force u32)daddr;
+#ifdef __BIG_ENDIAN__
+ s += proto + len;
+#else
+ s += (proto + len) << 8;
+#endif
+ return (__force __u32)from64to32(s);
+}
+
+/*
+ * This function has been taken from
+ * Linux kernel include/asm-generic/checksum.h
+ */
+static inline __u16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, __u32 len, __u8 proto, __u32 sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+static inline u16 udp_csum(u32 saddr, u32 daddr, u32 len, u8 proto, u16 *udp_pkt)
+{
+ u32 csum = 0;
+ u32 cnt = 0;
+
+ /* udp hdr and data */
+ for (; cnt < len; cnt += 2)
+ csum += udp_pkt[cnt >> 1];
+
+ return csum_tcpudp_magic(saddr, daddr, len, proto, csum);
+}
+
+static void gen_eth_hdr(void *data, struct ethhdr *eth_hdr)
+{
+ memcpy(eth_hdr->h_dest, ((struct ifobject *)data)->dst_mac, ETH_ALEN);
+ memcpy(eth_hdr->h_source, ((struct ifobject *)data)->src_mac, ETH_ALEN);
+ eth_hdr->h_proto = htons(ETH_P_IP);
+}
+
+static void gen_ip_hdr(void *data, struct iphdr *ip_hdr)
+{
+ ip_hdr->version = IP_PKT_VER;
+ ip_hdr->ihl = 0x5;
+ ip_hdr->tos = IP_PKT_TOS;
+ ip_hdr->tot_len = htons(IP_PKT_SIZE);
+ ip_hdr->id = 0;
+ ip_hdr->frag_off = 0;
+ ip_hdr->ttl = IPDEFTTL;
+ ip_hdr->protocol = IPPROTO_UDP;
+ ip_hdr->saddr = ((struct ifobject *)data)->src_ip;
+ ip_hdr->daddr = ((struct ifobject *)data)->dst_ip;
+ ip_hdr->check = 0;
+}
+
+static void gen_udp_hdr(void *data, void *arg, struct udphdr *udp_hdr)
+{
+ udp_hdr->source = htons(((struct ifobject *)arg)->src_port);
+ udp_hdr->dest = htons(((struct ifobject *)arg)->dst_port);
+ udp_hdr->len = htons(UDP_PKT_SIZE);
+ memset32_htonl(pkt_data + PKT_HDR_SIZE,
+ htonl(((struct generic_data *)data)->seqnum), UDP_PKT_DATA_SIZE);
+}
+
+static void gen_udp_csum(struct udphdr *udp_hdr, struct iphdr *ip_hdr)
+{
+ udp_hdr->check = 0;
+ udp_hdr->check =
+ udp_csum(ip_hdr->saddr, ip_hdr->daddr, UDP_PKT_SIZE, IPPROTO_UDP, (u16 *)udp_hdr);
+}
+
+static void gen_eth_frame(struct xsk_umem_info *umem, u64 addr)
+{
+ memcpy(xsk_umem__get_data(umem->buffer, addr), pkt_data, PKT_SIZE);
+}
+
+static void xsk_configure_umem(struct ifobject *data, void *buffer, u64 size)
+{
+ int ret;
+
+ data->umem = calloc(1, sizeof(struct xsk_umem_info));
+ if (!data->umem)
+ exit_with_error(errno);
+
+ ret = xsk_umem__create(&data->umem->umem, buffer, size,
+ &data->umem->fq, &data->umem->cq, NULL);
+ if (ret)
+ exit_with_error(ret);
+
+ data->umem->buffer = buffer;
+}
+
+static void xsk_populate_fill_ring(struct xsk_umem_info *umem)
+{
+ int ret, i;
+ u32 idx;
+
+ ret = xsk_ring_prod__reserve(&umem->fq, XSK_RING_PROD__DEFAULT_NUM_DESCS, &idx);
+ if (ret != XSK_RING_PROD__DEFAULT_NUM_DESCS)
+ exit_with_error(ret);
+ for (i = 0; i < XSK_RING_PROD__DEFAULT_NUM_DESCS; i++)
+ *xsk_ring_prod__fill_addr(&umem->fq, idx++) = i * XSK_UMEM__DEFAULT_FRAME_SIZE;
+ xsk_ring_prod__submit(&umem->fq, XSK_RING_PROD__DEFAULT_NUM_DESCS);
+}
+
+static int xsk_configure_socket(struct ifobject *ifobject)
+{
+ struct xsk_socket_config cfg;
+ struct xsk_ring_cons *rxr;
+ struct xsk_ring_prod *txr;
+ int ret;
+
+ ifobject->xsk = calloc(1, sizeof(struct xsk_socket_info));
+ if (!ifobject->xsk)
+ exit_with_error(errno);
+
+ ifobject->xsk->umem = ifobject->umem;
+ cfg.rx_size = XSK_RING_CONS__DEFAULT_NUM_DESCS;
+ cfg.tx_size = XSK_RING_PROD__DEFAULT_NUM_DESCS;
+ cfg.libbpf_flags = 0;
+ cfg.xdp_flags = opt_xdp_flags;
+ cfg.bind_flags = opt_xdp_bind_flags;
+
+ rxr = (ifobject->fv.vector == rx) ? &ifobject->xsk->rx : NULL;
+ txr = (ifobject->fv.vector == tx) ? &ifobject->xsk->tx : NULL;
+
+ ret = xsk_socket__create(&ifobject->xsk->xsk, ifobject->ifname,
+ opt_queue, ifobject->umem->umem, rxr, txr, &cfg);
+
+ if (ret)
+ return 1;
+
+ return 0;
+}
+
+static struct option long_options[] = {
+ {"interface", required_argument, 0, 'i'},
+ {"queue", optional_argument, 0, 'q'},
+ {"poll", no_argument, 0, 'p'},
+ {"xdp-skb", no_argument, 0, 'S'},
+ {"copy", no_argument, 0, 'c'},
+ {"debug", optional_argument, 0, 'D'},
+ {"tx-pkt-count", optional_argument, 0, 'C'},
+ {0, 0, 0, 0}
+};
+
+static void usage(const char *prog)
+{
+ const char *str =
+ " Usage: %s [OPTIONS]\n"
+ " Options:\n"
+ " -i, --interface Use interface\n"
+ " -q, --queue=n Use queue n (default 0)\n"
+ " -p, --poll Use poll syscall\n"
+ " -S, --xdp-skb=n Use XDP SKB mode\n"
+ " -c, --copy Force copy mode\n"
+ " -D, --debug Debug mode - dump packets L2 - L5\n"
+ " -C, --tx-pkt-count=n Number of packets to send\n";
+ ksft_print_msg(str, prog);
+}
+
+static bool switch_namespace(int idx)
+{
+ char fqns[26] = "/var/run/netns/";
+ int nsfd;
+
+ strncat(fqns, ifdict[idx]->nsname, sizeof(fqns) - strlen(fqns) - 1);
+ nsfd = open(fqns, O_RDONLY);
+
+ if (nsfd == -1)
+ exit_with_error(errno);
+
+ if (setns(nsfd, 0) == -1)
+ exit_with_error(errno);
+
+ return true;
+}
+
+static void *nsswitchthread(void *args)
+{
+ if (switch_namespace(((struct targs *)args)->idx)) {
+ ifdict[((struct targs *)args)->idx]->ifindex =
+ if_nametoindex(ifdict[((struct targs *)args)->idx]->ifname);
+ if (!ifdict[((struct targs *)args)->idx]->ifindex) {
+ ksft_test_result_fail
+ ("ERROR: [%s] interface \"%s\" does not exist\n",
+ __func__, ifdict[((struct targs *)args)->idx]->ifname);
+ ((struct targs *)args)->retptr = false;
+ } else {
+ ksft_print_msg("Interface found: %s\n",
+ ifdict[((struct targs *)args)->idx]->ifname);
+ ((struct targs *)args)->retptr = true;
+ }
+ } else {
+ ((struct targs *)args)->retptr = false;
+ }
+ pthread_exit(NULL);
+}
+
+static int validate_interfaces(void)
+{
+ bool ret = true;
+
+ for (int i = 0; i < MAX_INTERFACES; i++) {
+ if (!strcmp(ifdict[i]->ifname, "")) {
+ ret = false;
+ ksft_test_result_fail("ERROR: interfaces: -i <int>,<ns> -i <int>,<ns>.");
+ }
+ if (strcmp(ifdict[i]->nsname, "")) {
+ struct targs *targs;
+
+ targs = (struct targs *)malloc(sizeof(struct targs));
+ if (!targs)
+ exit_with_error(errno);
+
+ targs->idx = i;
+ if (pthread_create(&ns_thread, NULL, nsswitchthread, (void *)targs))
+ exit_with_error(errno);
+
+ pthread_join(ns_thread, NULL);
+
+ if (targs->retptr)
+ ksft_print_msg("NS switched: %s\n", ifdict[i]->nsname);
+
+ free(targs);
+ } else {
+ ifdict[i]->ifindex = if_nametoindex(ifdict[i]->ifname);
+ if (!ifdict[i]->ifindex) {
+ ksft_test_result_fail
+ ("ERROR: interface \"%s\" does not exist\n", ifdict[i]->ifname);
+ ret = false;
+ } else {
+ ksft_print_msg("Interface found: %s\n", ifdict[i]->ifname);
+ }
+ }
+ }
+ return ret;
+}
+
+static void parse_command_line(int argc, char **argv)
+{
+ int option_index, interface_index = 0, c;
+
+ opterr = 0;
+
+ for (;;) {
+ c = getopt_long(argc, argv, "i:q:pScDC:", long_options, &option_index);
+
+ if (c == -1)
+ break;
+
+ switch (c) {
+ case 'i':
+ if (interface_index == MAX_INTERFACES)
+ break;
+ char *sptr, *token;
+
+ sptr = strndupa(optarg, strlen(optarg));
+ memcpy(ifdict[interface_index]->ifname,
+ strsep(&sptr, ","), MAX_INTERFACE_NAME_CHARS);
+ token = strsep(&sptr, ",");
+ if (token)
+ memcpy(ifdict[interface_index]->nsname, token,
+ MAX_INTERFACES_NAMESPACE_CHARS);
+ interface_index++;
+ break;
+ case 'q':
+ opt_queue = atoi(optarg);
+ break;
+ case 'p':
+ opt_poll = 1;
+ break;
+ case 'S':
+ opt_xdp_flags |= XDP_FLAGS_SKB_MODE;
+ opt_xdp_bind_flags |= XDP_COPY;
+ uut = ORDER_CONTENT_VALIDATE_XDP_SKB;
+ break;
+ case 'c':
+ opt_xdp_bind_flags |= XDP_COPY;
+ break;
+ case 'D':
+ debug_pkt_dump = 1;
+ break;
+ case 'C':
+ opt_pkt_count = atoi(optarg);
+ break;
+ default:
+ usage(basename(argv[0]));
+ ksft_exit_xfail();
+ }
+ }
+
+ if (!validate_interfaces()) {
+ usage(basename(argv[0]));
+ ksft_exit_xfail();
+ }
+}
+
+static void kick_tx(struct xsk_socket_info *xsk)
+{
+ int ret;
+
+ ret = sendto(xsk_socket__fd(xsk->xsk), NULL, 0, MSG_DONTWAIT, NULL, 0);
+ if (ret >= 0 || errno == ENOBUFS || errno == EAGAIN || errno == EBUSY || errno == ENETDOWN)
+ return;
+ exit_with_error(errno);
+}
+
+static inline void complete_tx_only(struct xsk_socket_info *xsk, int batch_size)
+{
+ unsigned int rcvd;
+ u32 idx;
+
+ if (!xsk->outstanding_tx)
+ return;
+
+ if (!NEED_WAKEUP || xsk_ring_prod__needs_wakeup(&xsk->tx))
+ kick_tx(xsk);
+
+ rcvd = xsk_ring_cons__peek(&xsk->umem->cq, batch_size, &idx);
+ if (rcvd) {
+ xsk_ring_cons__release(&xsk->umem->cq, rcvd);
+ xsk->outstanding_tx -= rcvd;
+ xsk->tx_npkts += rcvd;
+ }
+}
+
+static void rx_pkt(struct xsk_socket_info *xsk, struct pollfd *fds)
+{
+ unsigned int rcvd, i;
+ u32 idx_rx = 0, idx_fq = 0;
+ int ret;
+
+ rcvd = xsk_ring_cons__peek(&xsk->rx, BATCH_SIZE, &idx_rx);
+ if (!rcvd) {
+ if (xsk_ring_prod__needs_wakeup(&xsk->umem->fq)) {
+ ret = poll(fds, 1, POLL_TMOUT);
+ if (ret < 0)
+ exit_with_error(ret);
+ }
+ return;
+ }
+
+ ret = xsk_ring_prod__reserve(&xsk->umem->fq, rcvd, &idx_fq);
+ while (ret != rcvd) {
+ if (ret < 0)
+ exit_with_error(ret);
+ if (xsk_ring_prod__needs_wakeup(&xsk->umem->fq)) {
+ ret = poll(fds, 1, POLL_TMOUT);
+ if (ret < 0)
+ exit_with_error(ret);
+ }
+ ret = xsk_ring_prod__reserve(&xsk->umem->fq, rcvd, &idx_fq);
+ }
+
+ for (i = 0; i < rcvd; i++) {
+ u64 addr = xsk_ring_cons__rx_desc(&xsk->rx, idx_rx)->addr;
+ (void)xsk_ring_cons__rx_desc(&xsk->rx, idx_rx++)->len;
+ u64 orig = xsk_umem__extract_addr(addr);
+
+ addr = xsk_umem__add_offset_to_addr(addr);
+ pkt_node_rx = malloc(sizeof(struct pkt) + PKT_SIZE);
+ if (!pkt_node_rx)
+ exit_with_error(errno);
+
+ pkt_node_rx->pkt_frame = (char *)malloc(PKT_SIZE);
+ if (!pkt_node_rx->pkt_frame)
+ exit_with_error(errno);
+
+ memcpy(pkt_node_rx->pkt_frame, xsk_umem__get_data(xsk->umem->buffer, addr),
+ PKT_SIZE);
+
+ TAILQ_INSERT_HEAD(&head, pkt_node_rx, pkt_nodes);
+
+ *xsk_ring_prod__fill_addr(&xsk->umem->fq, idx_fq++) = orig;
+ }
+
+ xsk_ring_prod__submit(&xsk->umem->fq, rcvd);
+ xsk_ring_cons__release(&xsk->rx, rcvd);
+ xsk->rx_npkts += rcvd;
+}
+
+static void tx_only(struct xsk_socket_info *xsk, u32 *frameptr, int batch_size)
+{
+ u32 idx;
+ unsigned int i;
+
+ while (xsk_ring_prod__reserve(&xsk->tx, batch_size, &idx) < batch_size)
+ complete_tx_only(xsk, batch_size);
+
+ for (i = 0; i < batch_size; i++) {
+ struct xdp_desc *tx_desc = xsk_ring_prod__tx_desc(&xsk->tx, idx + i);
+
+ tx_desc->addr = (*frameptr + i) << XSK_UMEM__DEFAULT_FRAME_SHIFT;
+ tx_desc->len = PKT_SIZE;
+ }
+
+ xsk_ring_prod__submit(&xsk->tx, batch_size);
+ xsk->outstanding_tx += batch_size;
+ *frameptr += batch_size;
+ *frameptr %= num_frames;
+ complete_tx_only(xsk, batch_size);
+}
+
+static inline int get_batch_size(int pkt_cnt)
+{
+ if (!opt_pkt_count)
+ return BATCH_SIZE;
+
+ if (pkt_cnt + BATCH_SIZE <= opt_pkt_count)
+ return BATCH_SIZE;
+
+ return opt_pkt_count - pkt_cnt;
+}
+
+static void complete_tx_only_all(void *arg)
+{
+ bool pending;
+
+ do {
+ pending = false;
+ if (((struct ifobject *)arg)->xsk->outstanding_tx) {
+ complete_tx_only(((struct ifobject *)
+ arg)->xsk, BATCH_SIZE);
+ pending = !!((struct ifobject *)arg)->xsk->outstanding_tx;
+ }
+ } while (pending);
+}
+
+static void tx_only_all(void *arg)
+{
+ struct pollfd fds[MAX_SOCKS] = { };
+ u32 frame_nb = 0;
+ int pkt_cnt = 0;
+ int ret;
+
+ fds[0].fd = xsk_socket__fd(((struct ifobject *)arg)->xsk->xsk);
+ fds[0].events = POLLOUT;
+
+ while ((opt_pkt_count && pkt_cnt < opt_pkt_count) || !opt_pkt_count) {
+ int batch_size = get_batch_size(pkt_cnt);
+
+ if (opt_poll) {
+ ret = poll(fds, 1, POLL_TMOUT);
+ if (ret <= 0)
+ continue;
+
+ if (!(fds[0].revents & POLLOUT))
+ continue;
+ }
+
+ tx_only(((struct ifobject *)arg)->xsk, &frame_nb, batch_size);
+ pkt_cnt += batch_size;
+ }
+
+ if (opt_pkt_count)
+ complete_tx_only_all(arg);
+}
+
+static void worker_pkt_dump(void)
+{
+ struct in_addr ipaddr;
+
+ fprintf(stdout, "---------------------------------------\n");
+ for (int iter = 0; iter < num_frames - 1; iter++) {
+ /*extract L2 frame */
+ fprintf(stdout, "DEBUG>> L2: dst mac: ");
+ for (int i = 0; i < ETH_ALEN; i++)
+ fprintf(stdout, "%02X", ((struct ethhdr *)
+ pkt_buf[iter]->payload)->h_dest[i]);
+
+ fprintf(stdout, "\nDEBUG>> L2: src mac: ");
+ for (int i = 0; i < ETH_ALEN; i++)
+ fprintf(stdout, "%02X", ((struct ethhdr *)
+ pkt_buf[iter]->payload)->h_source[i]);
+
+ /*extract L3 frame */
+ fprintf(stdout, "\nDEBUG>> L3: ip_hdr->ihl: %02X\n",
+ ((struct iphdr *)(pkt_buf[iter]->payload + sizeof(struct ethhdr)))->ihl);
+
+ ipaddr.s_addr =
+ ((struct iphdr *)(pkt_buf[iter]->payload + sizeof(struct ethhdr)))->saddr;
+ fprintf(stdout, "DEBUG>> L3: ip_hdr->saddr: %s\n", inet_ntoa(ipaddr));
+
+ ipaddr.s_addr =
+ ((struct iphdr *)(pkt_buf[iter]->payload + sizeof(struct ethhdr)))->daddr;
+ fprintf(stdout, "DEBUG>> L3: ip_hdr->daddr: %s\n", inet_ntoa(ipaddr));
+
+ /*extract L4 frame */
+ fprintf(stdout, "DEBUG>> L4: udp_hdr->src: %d\n",
+ ntohs(((struct udphdr *)(pkt_buf[iter]->payload +
+ sizeof(struct ethhdr) +
+ sizeof(struct iphdr)))->source));
+
+ fprintf(stdout, "DEBUG>> L4: udp_hdr->dst: %d\n",
+ ntohs(((struct udphdr *)(pkt_buf[iter]->payload +
+ sizeof(struct ethhdr) +
+ sizeof(struct iphdr)))->dest));
+ /*extract L5 frame */
+ int payload = *((uint32_t *)(pkt_buf[iter]->payload + PKT_HDR_SIZE));
+
+ if (payload == EOT) {
+ ksft_print_msg("End-of-tranmission frame received\n");
+ fprintf(stdout, "---------------------------------------\n");
+ break;
+ }
+ fprintf(stdout, "DEBUG>> L5: payload: %d\n", payload);
+ fprintf(stdout, "---------------------------------------\n");
+ }
+}
+
+static void worker_pkt_validate(void)
+{
+ u32 payloadseqnum = -2;
+
+ while (1) {
+ pkt_node_rx_q = malloc(sizeof(struct pkt));
+ pkt_node_rx_q = TAILQ_LAST(&head, head_s);
+ if (!pkt_node_rx_q)
+ break;
+ /*do not increment pktcounter if !(tos=0x9 and ipv4) */
+ if ((((struct iphdr *)(pkt_node_rx_q->pkt_frame +
+ sizeof(struct ethhdr)))->version == IP_PKT_VER)
+ && (((struct iphdr *)(pkt_node_rx_q->pkt_frame + sizeof(struct ethhdr)))->tos ==
+ IP_PKT_TOS)) {
+ payloadseqnum = *((uint32_t *) (pkt_node_rx_q->pkt_frame + PKT_HDR_SIZE));
+ if (debug_pkt_dump && payloadseqnum != EOT) {
+ pkt_obj = (struct pkt_frame *)malloc(sizeof(struct pkt_frame));
+ pkt_obj->payload = (char *)malloc(PKT_SIZE);
+ memcpy(pkt_obj->payload, pkt_node_rx_q->pkt_frame, PKT_SIZE);
+ pkt_buf[payloadseqnum] = pkt_obj;
+ }
+
+ if (payloadseqnum == EOT) {
+ ksft_print_msg("End-of-tranmission frame received: PASS\n");
+ sigvar = 1;
+ break;
+ }
+
+ if (prev_pkt + 1 != payloadseqnum) {
+ ksft_test_result_fail
+ ("ERROR: [%s] prev_pkt [%d], payloadseqnum [%d]\n",
+ __func__, prev_pkt, payloadseqnum);
+ ksft_exit_xfail();
+ }
+
+ TAILQ_REMOVE(&head, pkt_node_rx_q, pkt_nodes);
+ free(pkt_node_rx_q->pkt_frame);
+ free(pkt_node_rx_q);
+ pkt_node_rx_q = NULL;
+ prev_pkt = payloadseqnum;
+ pkt_counter++;
+ } else {
+ ksft_print_msg("Invalid frame received: ");
+ ksft_print_msg("[IP_PKT_VER: %02X], [IP_PKT_TOS: %02X]\n",
+ ((struct iphdr *)(pkt_node_rx_q->pkt_frame +
+ sizeof(struct ethhdr)))->version,
+ ((struct iphdr *)(pkt_node_rx_q->pkt_frame +
+ sizeof(struct ethhdr)))->tos);
+ TAILQ_REMOVE(&head, pkt_node_rx_q, pkt_nodes);
+ free(pkt_node_rx_q->pkt_frame);
+ free(pkt_node_rx_q);
+ pkt_node_rx_q = NULL;
+ }
+ }
+}
+
+static void thread_common_ops(void *arg, void *bufs, pthread_mutex_t *mutexptr,
+ atomic_int *spinningptr)
+{
+ int ctr = 0;
+ int ret;
+
+ xsk_configure_umem((struct ifobject *)arg, bufs, num_frames * XSK_UMEM__DEFAULT_FRAME_SIZE);
+ ret = xsk_configure_socket((struct ifobject *)arg);
+
+ /* Retry Create Socket if it fails as xsk_socket__create()
+ * is asynchronous
+ *
+ * Essential to lock Mutex here to prevent Tx thread from
+ * entering before Rx and causing a deadlock
+ */
+ pthread_mutex_lock(mutexptr);
+ while (ret && ctr < SOCK_RECONF_CTR) {
+ atomic_store(spinningptr, 1);
+ xsk_configure_umem((struct ifobject *)arg,
+ bufs, num_frames * XSK_UMEM__DEFAULT_FRAME_SIZE);
+ ret = xsk_configure_socket((struct ifobject *)arg);
+ usleep(USLEEP_MAX);
+ ctr++;
+ }
+ atomic_store(spinningptr, 0);
+ pthread_mutex_unlock(mutexptr);
+
+ if (ctr >= SOCK_RECONF_CTR)
+ exit_with_error(ret);
+}
+
+static void *worker_testapp_validate(void *arg)
+{
+ struct udphdr *udp_hdr =
+ (struct udphdr *)(pkt_data + sizeof(struct ethhdr) + sizeof(struct iphdr));
+ struct generic_data *data = (struct generic_data *)malloc(sizeof(struct generic_data));
+ struct iphdr *ip_hdr = (struct iphdr *)(pkt_data + sizeof(struct ethhdr));
+ struct ethhdr *eth_hdr = (struct ethhdr *)pkt_data;
+ void *bufs;
+
+ pthread_attr_setstacksize(&attr, THREAD_STACK);
+
+ bufs = mmap(NULL, num_frames * XSK_UMEM__DEFAULT_FRAME_SIZE,
+ PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ if (bufs == MAP_FAILED)
+ exit_with_error(errno);
+
+ if (strcmp(((struct ifobject *)arg)->nsname, ""))
+ switch_namespace(((struct ifobject *)arg)->ifdict_index);
+
+ if (((struct ifobject *)arg)->fv.vector == tx) {
+ int spinningrxctr = 0;
+
+ thread_common_ops(arg, bufs, &sync_mutex_tx, &spinning_tx);
+
+ while (atomic_load(&spinning_rx) && spinningrxctr < SOCK_RECONF_CTR) {
+ spinningrxctr++;
+ usleep(USLEEP_MAX);
+ }
+
+ ksft_print_msg("Interface [%s] vector [Tx]\n", ((struct ifobject *)arg)->ifname);
+ for (int i = 0; i < num_frames; i++) {
+ /*send EOT frame */
+ if (i == (num_frames - 1))
+ data->seqnum = -1;
+ else
+ data->seqnum = i;
+ gen_udp_hdr((void *)data, (void *)arg, udp_hdr);
+ gen_ip_hdr((void *)arg, ip_hdr);
+ gen_udp_csum(udp_hdr, ip_hdr);
+ gen_eth_hdr((void *)arg, eth_hdr);
+ gen_eth_frame(((struct ifobject *)arg)->umem,
+ i * XSK_UMEM__DEFAULT_FRAME_SIZE);
+ }
+
+ free(data);
+ ksft_print_msg("Sending %d packets on interface %s\n",
+ (opt_pkt_count - 1), ((struct ifobject *)arg)->ifname);
+ tx_only_all(arg);
+ } else if (((struct ifobject *)arg)->fv.vector == rx) {
+ struct pollfd fds[MAX_SOCKS] = { };
+ int ret;
+
+ thread_common_ops(arg, bufs, &sync_mutex_tx, &spinning_rx);
+
+ ksft_print_msg("Interface [%s] vector [Rx]\n", ((struct ifobject *)arg)->ifname);
+ xsk_populate_fill_ring(((struct ifobject *)arg)->umem);
+
+ TAILQ_INIT(&head);
+ if (debug_pkt_dump) {
+ pkt_buf = malloc(sizeof(struct pkt_frame **) * num_frames);
+ if (!pkt_buf)
+ exit_with_error(errno);
+ }
+
+ fds[0].fd = xsk_socket__fd(((struct ifobject *)arg)->xsk->xsk);
+ fds[0].events = POLLIN;
+
+ pthread_mutex_lock(&sync_mutex);
+ pthread_cond_signal(&signal_rx_condition);
+ pthread_mutex_unlock(&sync_mutex);
+
+ while (1) {
+ if (opt_poll) {
+ ret = poll(fds, 1, POLL_TMOUT);
+ if (ret <= 0)
+ continue;
+ }
+ rx_pkt(((struct ifobject *)arg)->xsk, fds);
+ worker_pkt_validate();
+
+ if (sigvar)
+ break;
+ }
+
+ ksft_print_msg("Received %d packets on interface %s\n",
+ pkt_counter, ((struct ifobject *)arg)->ifname);
+ }
+
+ xsk_socket__delete(((struct ifobject *)arg)->xsk->xsk);
+ (void)xsk_umem__delete(((struct ifobject *)arg)->umem->umem);
+ pthread_exit(NULL);
+}
+
+static void testapp_validate(void)
+{
+ pthread_attr_init(&attr);
+ pthread_attr_setstacksize(&attr, THREAD_STACK);
+
+ pthread_mutex_lock(&sync_mutex);
+
+ /*Spawn RX thread */
+ if (pthread_create(&t0, &attr, worker_testapp_validate, (void *)ifdict[1]))
+ exit_with_error(errno);
+
+ struct timespec max_wait = { 0, 0 };
+
+ if (clock_gettime(CLOCK_REALTIME, &max_wait))
+ exit_with_error(errno);
+ max_wait.tv_sec += TMOUT_SEC;
+
+ if (pthread_cond_timedwait(&signal_rx_condition, &sync_mutex, &max_wait) == ETIMEDOUT)
+ exit_with_error(errno);
+
+ pthread_mutex_unlock(&sync_mutex);
+
+ /*Spawn TX thread */
+ if (pthread_create(&t1, &attr, worker_testapp_validate, (void *)ifdict[0]))
+ exit_with_error(errno);
+
+ pthread_join(t1, NULL);
+ pthread_join(t0, NULL);
+
+ if (debug_pkt_dump) {
+ worker_pkt_dump();
+ for (int iter = 0; iter < num_frames - 1; iter++) {
+ free(pkt_buf[iter]->payload);
+ free(pkt_buf[iter]);
+ }
+ free(pkt_buf);
+ }
+
+ print_ksft_result();
+}
+
+static void init_iface_config(void *ifaceconfig)
+{
+ /*Init interface0 */
+ ifdict[0]->fv.vector = tx;
+ memcpy(ifdict[0]->dst_mac, ((struct ifaceconfigobj *)ifaceconfig)->dst_mac, ETH_ALEN);
+ memcpy(ifdict[0]->src_mac, ((struct ifaceconfigobj *)ifaceconfig)->src_mac, ETH_ALEN);
+ ifdict[0]->dst_ip = ((struct ifaceconfigobj *)ifaceconfig)->dst_ip.s_addr;
+ ifdict[0]->src_ip = ((struct ifaceconfigobj *)ifaceconfig)->src_ip.s_addr;
+ ifdict[0]->dst_port = ((struct ifaceconfigobj *)ifaceconfig)->dst_port;
+ ifdict[0]->src_port = ((struct ifaceconfigobj *)ifaceconfig)->src_port;
+
+ /*Init interface1 */
+ ifdict[1]->fv.vector = rx;
+ memcpy(ifdict[1]->dst_mac, ((struct ifaceconfigobj *)ifaceconfig)->src_mac, ETH_ALEN);
+ memcpy(ifdict[1]->src_mac, ((struct ifaceconfigobj *)ifaceconfig)->dst_mac, ETH_ALEN);
+ ifdict[1]->dst_ip = ((struct ifaceconfigobj *)ifaceconfig)->src_ip.s_addr;
+ ifdict[1]->src_ip = ((struct ifaceconfigobj *)ifaceconfig)->dst_ip.s_addr;
+ ifdict[1]->dst_port = ((struct ifaceconfigobj *)ifaceconfig)->src_port;
+ ifdict[1]->src_port = ((struct ifaceconfigobj *)ifaceconfig)->dst_port;
+}
+
+int main(int argc, char **argv)
+{
+ struct rlimit _rlim = { RLIM_INFINITY, RLIM_INFINITY };
+
+ if (setrlimit(RLIMIT_MEMLOCK, &_rlim))
+ exit_with_error(errno);
+
+ const char *MAC1 = "\x00\x0A\x56\x9E\xEE\x62";
+ const char *MAC2 = "\x00\x0A\x56\x9E\xEE\x61";
+ const char *IP1 = "192.168.100.162";
+ const char *IP2 = "192.168.100.161";
+ u16 UDP_DST_PORT = 2020;
+ u16 UDP_SRC_PORT = 2121;
+
+ ifaceconfig = (struct ifaceconfigobj *)malloc(sizeof(struct ifaceconfigobj));
+ memcpy(ifaceconfig->dst_mac, MAC1, ETH_ALEN);
+ memcpy(ifaceconfig->src_mac, MAC2, ETH_ALEN);
+ inet_aton(IP1, &ifaceconfig->dst_ip);
+ inet_aton(IP2, &ifaceconfig->src_ip);
+ ifaceconfig->dst_port = UDP_DST_PORT;
+ ifaceconfig->src_port = UDP_SRC_PORT;
+
+ for (int i = 0; i < MAX_INTERFACES; i++) {
+ ifdict[i] = (struct ifobject *)malloc(sizeof(struct ifobject));
+ if (!ifdict[i])
+ exit_with_error(errno);
+
+ ifdict[i]->ifdict_index = i;
+ }
+
+ setlocale(LC_ALL, "");
+
+ parse_command_line(argc, argv);
+
+ num_frames = ++opt_pkt_count;
+
+ init_iface_config((void *)ifaceconfig);
+
+ pthread_init_mutex();
+
+ ksft_set_plan(1);
+
+ testapp_validate();
+
+ for (int i = 0; i < MAX_INTERFACES; i++)
+ free(ifdict[i]);
+
+ pthread_destroy_mutex();
+
+ ksft_exit_pass();
+
+ return 0;
+}
diff --git a/tools/testing/selftests/bpf/xdpxceiver.h b/tools/testing/selftests/bpf/xdpxceiver.h
new file mode 100644
index 000000000000..5929f2fc1224
--- /dev/null
+++ b/tools/testing/selftests/bpf/xdpxceiver.h
@@ -0,0 +1,153 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Copyright(c) 2020 Intel Corporation.
+ */
+
+#ifndef XDPXCEIVER_H_
+#define XDPXCEIVER_H_
+
+#ifndef SOL_XDP
+#define SOL_XDP 283
+#endif
+
+#ifndef AF_XDP
+#define AF_XDP 44
+#endif
+
+#ifndef PF_XDP
+#define PF_XDP AF_XDP
+#endif
+
+#define MAX_INTERFACES 2
+#define MAX_INTERFACE_NAME_CHARS 7
+#define MAX_INTERFACES_NAMESPACE_CHARS 10
+#define MAX_SOCKS 1
+#define PKT_HDR_SIZE (sizeof(struct ethhdr) + sizeof(struct iphdr) + \
+ sizeof(struct udphdr))
+#define MIN_PKT_SIZE 64
+#define ETH_FCS_SIZE 4
+#define PKT_SIZE (MIN_PKT_SIZE - ETH_FCS_SIZE)
+#define IP_PKT_SIZE (PKT_SIZE - sizeof(struct ethhdr))
+#define IP_PKT_VER 0x4
+#define IP_PKT_TOS 0x9
+#define UDP_PKT_SIZE (IP_PKT_SIZE - sizeof(struct iphdr))
+#define UDP_PKT_DATA_SIZE (UDP_PKT_SIZE - sizeof(struct udphdr))
+#define TMOUT_SEC (3)
+#define EOT (-1)
+#define USLEEP_MAX 200000
+#define THREAD_STACK 60000000
+#define SOCK_RECONF_CTR 10
+#define BATCH_SIZE 64
+#define POLL_TMOUT 1000
+#define NEED_WAKEUP 1
+
+typedef __u32 u32;
+typedef __u16 u16;
+typedef __u8 u8;
+
+enum TESTS {
+ ORDER_CONTENT_VALIDATE_XDP_SKB = 0,
+};
+
+u8 uut;
+u8 debug_pkt_dump;
+u32 num_frames;
+
+static u32 opt_xdp_flags = XDP_FLAGS_UPDATE_IF_NOEXIST;
+static int opt_queue;
+static int opt_pkt_count;
+static int opt_poll;
+static u32 opt_xdp_bind_flags = XDP_USE_NEED_WAKEUP;
+static u8 pkt_data[XSK_UMEM__DEFAULT_FRAME_SIZE];
+static u32 pkt_counter;
+static u32 prev_pkt = -1;
+static int sigvar;
+
+struct xsk_umem_info {
+ struct xsk_ring_prod fq;
+ struct xsk_ring_cons cq;
+ struct xsk_umem *umem;
+ void *buffer;
+};
+
+struct xsk_socket_info {
+ struct xsk_ring_cons rx;
+ struct xsk_ring_prod tx;
+ struct xsk_umem_info *umem;
+ struct xsk_socket *xsk;
+ unsigned long rx_npkts;
+ unsigned long tx_npkts;
+ unsigned long prev_rx_npkts;
+ unsigned long prev_tx_npkts;
+ u32 outstanding_tx;
+};
+
+struct flow_vector {
+ enum fvector {
+ tx,
+ rx,
+ bidi,
+ undef,
+ } vector;
+};
+
+struct generic_data {
+ u32 seqnum;
+};
+
+struct ifaceconfigobj {
+ u8 dst_mac[ETH_ALEN];
+ u8 src_mac[ETH_ALEN];
+ struct in_addr dst_ip;
+ struct in_addr src_ip;
+ u16 src_port;
+ u16 dst_port;
+} *ifaceconfig;
+
+struct ifobject {
+ int ifindex;
+ int ifdict_index;
+ char ifname[MAX_INTERFACE_NAME_CHARS];
+ char nsname[MAX_INTERFACES_NAMESPACE_CHARS];
+ struct flow_vector fv;
+ struct xsk_socket_info *xsk;
+ struct xsk_umem_info *umem;
+ u8 dst_mac[ETH_ALEN];
+ u8 src_mac[ETH_ALEN];
+ u32 dst_ip;
+ u32 src_ip;
+ u16 src_port;
+ u16 dst_port;
+};
+
+static struct ifobject *ifdict[MAX_INTERFACES];
+
+/*threads*/
+atomic_int spinning_tx;
+atomic_int spinning_rx;
+pthread_mutex_t sync_mutex;
+pthread_mutex_t sync_mutex_tx;
+pthread_cond_t signal_rx_condition;
+pthread_cond_t signal_tx_condition;
+pthread_t t0, t1, ns_thread;
+pthread_attr_t attr;
+
+struct targs {
+ bool retptr;
+ int idx;
+};
+
+TAILQ_HEAD(head_s, pkt) head = TAILQ_HEAD_INITIALIZER(head);
+struct head_s *head_p;
+struct pkt {
+ char *pkt_frame;
+
+ TAILQ_ENTRY(pkt) pkt_nodes;
+} *pkt_node_rx, *pkt_node_rx_q;
+
+struct pkt_frame {
+ char *payload;
+} *pkt_obj;
+
+struct pkt_frame **pkt_buf;
+
+#endif /* XDPXCEIVER_H */
diff --git a/tools/testing/selftests/bpf/xsk_prereqs.sh b/tools/testing/selftests/bpf/xsk_prereqs.sh
index 29762739c21b..9d54c4645127 100755
--- a/tools/testing/selftests/bpf/xsk_prereqs.sh
+++ b/tools/testing/selftests/bpf/xsk_prereqs.sh
@@ -14,6 +14,8 @@ RED='\033[0;31m'
NC='\033[0m'
STACK_LIM=131072
SPECFILE=veth.spec
+XSKOBJ=xdpxceiver
+NUMPKTS=10000
validate_root_exec()
{
@@ -117,3 +119,17 @@ vethXDPnative()
ip link set dev $1 xdpgeneric off
ip netns exec $3 ip link set dev $2 xdpgeneric off
}
+
+execxdpxceiver()
+{
+ local -a 'paramkeys=("${!'"$1"'[@]}")' copy
+ paramkeysstr=${paramkeys[*]}
+
+ for index in $paramkeysstr;
+ do
+ current=$1"[$index]"
+ copy[$index]=${!current}
+ done
+
+ ./${XSKOBJ} -i ${VETH0} -i ${VETH1},${NS1} ${copy[*]} -C ${NUMPKTS}
+}
--
2.20.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH bpf-next v4 3/5] selftests/bpf: xsk selftests - DRV POLL, NOPOLL
2020-12-07 21:53 [PATCH bpf-next v4 0/5] selftests/bpf: xsk selftests Weqaar Janjua
2020-12-07 21:53 ` [PATCH bpf-next v4 1/5] selftests/bpf: xsk selftests framework Weqaar Janjua
2020-12-07 21:53 ` [PATCH bpf-next v4 2/5] selftests/bpf: xsk selftests - SKB POLL, NOPOLL Weqaar Janjua
@ 2020-12-07 21:53 ` Weqaar Janjua
2020-12-07 21:53 ` [PATCH bpf-next v4 4/5] selftests/bpf: xsk selftests - Socket Teardown - SKB, DRV Weqaar Janjua
` (3 subsequent siblings)
6 siblings, 0 replies; 11+ messages in thread
From: Weqaar Janjua @ 2020-12-07 21:53 UTC (permalink / raw)
To: bpf, netdev, daniel, ast, yhs, magnus.karlsson, bjorn.topel
Cc: Weqaar Janjua, shuah, skhan, linux-kselftest, anders.roxell,
jonathan.lemon
Adds following tests:
2. AF_XDP DRV/Native mode
Works on any netdevice with XDP_REDIRECT support, driver dependent.
Processes packets before SKB allocation. Provides better performance
than SKB. Driver hook available just after DMA of buffer descriptor.
a. nopoll
b. poll
* Only copy mode is supported because veth does not currently support
zero-copy mode
Signed-off-by: Weqaar Janjua <weqaar.a.janjua@intel.com>
---
tools/testing/selftests/bpf/test_xsk.sh | 24 ++++++++++++++++++++++++
tools/testing/selftests/bpf/xdpxceiver.c | 22 +++++++++++++++++++---
tools/testing/selftests/bpf/xdpxceiver.h | 3 ++-
3 files changed, 45 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/bpf/test_xsk.sh b/tools/testing/selftests/bpf/test_xsk.sh
index 0b7bafb65f43..aad8065637fd 100755
--- a/tools/testing/selftests/bpf/test_xsk.sh
+++ b/tools/testing/selftests/bpf/test_xsk.sh
@@ -173,6 +173,30 @@ retval=$?
test_status $retval "${TEST_NAME}"
statusList+=($retval)
+### TEST 4
+TEST_NAME="DRV NOPOLL"
+
+vethXDPnative ${VETH0} ${VETH1} ${NS1}
+
+params=("-N")
+execxdpxceiver params
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
+### TEST 5
+TEST_NAME="DRV POLL"
+
+vethXDPnative ${VETH0} ${VETH1} ${NS1}
+
+params=("-N" "-p")
+execxdpxceiver params
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
## END TESTS
cleanup_exit ${VETH0} ${VETH1} ${NS1}
diff --git a/tools/testing/selftests/bpf/xdpxceiver.c b/tools/testing/selftests/bpf/xdpxceiver.c
index 3f2a65b6a9f5..9fcd80a38b07 100644
--- a/tools/testing/selftests/bpf/xdpxceiver.c
+++ b/tools/testing/selftests/bpf/xdpxceiver.c
@@ -27,7 +27,16 @@
* a. nopoll - soft-irq processing
* b. poll - using poll() syscall
*
- * Total tests: 2
+ * 2. AF_XDP DRV/Native mode
+ * Works on any netdevice with XDP_REDIRECT support, driver dependent. Processes
+ * packets before SKB allocation. Provides better performance than SKB. Driver
+ * hook available just after DMA of buffer descriptor.
+ * a. nopoll
+ * b. poll
+ * - Only copy mode is supported because veth does not currently support
+ * zero-copy mode
+ *
+ * Total tests: 4
*
* Flow:
* -----
@@ -88,7 +97,7 @@ static void __exit_with_error(int error, const char *file, const char *func, int
#define exit_with_error(error) __exit_with_error(error, __FILE__, __func__, __LINE__)
#define print_ksft_result(void)\
- (ksft_test_result_pass("PASS: %s %s\n", uut ? "" : "SKB", opt_poll ? "POLL" : "NOPOLL"))
+ (ksft_test_result_pass("PASS: %s %s\n", uut ? "DRV" : "SKB", opt_poll ? "POLL" : "NOPOLL"))
static void pthread_init_mutex(void)
{
@@ -311,6 +320,7 @@ static struct option long_options[] = {
{"queue", optional_argument, 0, 'q'},
{"poll", no_argument, 0, 'p'},
{"xdp-skb", no_argument, 0, 'S'},
+ {"xdp-native", no_argument, 0, 'N'},
{"copy", no_argument, 0, 'c'},
{"debug", optional_argument, 0, 'D'},
{"tx-pkt-count", optional_argument, 0, 'C'},
@@ -326,6 +336,7 @@ static void usage(const char *prog)
" -q, --queue=n Use queue n (default 0)\n"
" -p, --poll Use poll syscall\n"
" -S, --xdp-skb=n Use XDP SKB mode\n"
+ " -N, --xdp-native=n Enforce XDP DRV (native) mode\n"
" -c, --copy Force copy mode\n"
" -D, --debug Debug mode - dump packets L2 - L5\n"
" -C, --tx-pkt-count=n Number of packets to send\n";
@@ -417,7 +428,7 @@ static void parse_command_line(int argc, char **argv)
opterr = 0;
for (;;) {
- c = getopt_long(argc, argv, "i:q:pScDC:", long_options, &option_index);
+ c = getopt_long(argc, argv, "i:q:pSNcDC:", long_options, &option_index);
if (c == -1)
break;
@@ -448,6 +459,11 @@ static void parse_command_line(int argc, char **argv)
opt_xdp_bind_flags |= XDP_COPY;
uut = ORDER_CONTENT_VALIDATE_XDP_SKB;
break;
+ case 'N':
+ opt_xdp_flags |= XDP_FLAGS_DRV_MODE;
+ opt_xdp_bind_flags |= XDP_COPY;
+ uut = ORDER_CONTENT_VALIDATE_XDP_DRV;
+ break;
case 'c':
opt_xdp_bind_flags |= XDP_COPY;
break;
diff --git a/tools/testing/selftests/bpf/xdpxceiver.h b/tools/testing/selftests/bpf/xdpxceiver.h
index 5929f2fc1224..12070d66344b 100644
--- a/tools/testing/selftests/bpf/xdpxceiver.h
+++ b/tools/testing/selftests/bpf/xdpxceiver.h
@@ -38,7 +38,7 @@
#define SOCK_RECONF_CTR 10
#define BATCH_SIZE 64
#define POLL_TMOUT 1000
-#define NEED_WAKEUP 1
+#define NEED_WAKEUP true
typedef __u32 u32;
typedef __u16 u16;
@@ -46,6 +46,7 @@ typedef __u8 u8;
enum TESTS {
ORDER_CONTENT_VALIDATE_XDP_SKB = 0,
+ ORDER_CONTENT_VALIDATE_XDP_DRV = 1,
};
u8 uut;
--
2.20.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH bpf-next v4 4/5] selftests/bpf: xsk selftests - Socket Teardown - SKB, DRV
2020-12-07 21:53 [PATCH bpf-next v4 0/5] selftests/bpf: xsk selftests Weqaar Janjua
` (2 preceding siblings ...)
2020-12-07 21:53 ` [PATCH bpf-next v4 3/5] selftests/bpf: xsk selftests - DRV " Weqaar Janjua
@ 2020-12-07 21:53 ` Weqaar Janjua
2020-12-07 21:53 ` [PATCH bpf-next v4 5/5] selftests/bpf: xsk selftests - Bi-directional Sockets " Weqaar Janjua
` (2 subsequent siblings)
6 siblings, 0 replies; 11+ messages in thread
From: Weqaar Janjua @ 2020-12-07 21:53 UTC (permalink / raw)
To: bpf, netdev, daniel, ast, yhs, magnus.karlsson, bjorn.topel
Cc: Weqaar Janjua, shuah, skhan, linux-kselftest, anders.roxell,
jonathan.lemon
Adds following tests:
1. AF_XDP SKB mode
c. Socket Teardown
Create a Tx and a Rx socket, Tx from one socket, Rx on another.
Destroy both sockets, then repeat multiple times. Only nopoll mode
is used
2. AF_XDP DRV/Native mode
c. Socket Teardown
* Only copy mode is supported because veth does not currently support
zero-copy mode
Signed-off-by: Weqaar Janjua <weqaar.a.janjua@intel.com>
---
tools/testing/selftests/bpf/test_xsk.sh | 24 ++++++++++++++++
tools/testing/selftests/bpf/xdpxceiver.c | 35 +++++++++++++++++++++---
tools/testing/selftests/bpf/xdpxceiver.h | 2 ++
3 files changed, 57 insertions(+), 4 deletions(-)
diff --git a/tools/testing/selftests/bpf/test_xsk.sh b/tools/testing/selftests/bpf/test_xsk.sh
index aad8065637fd..9be9dff25560 100755
--- a/tools/testing/selftests/bpf/test_xsk.sh
+++ b/tools/testing/selftests/bpf/test_xsk.sh
@@ -197,6 +197,30 @@ retval=$?
test_status $retval "${TEST_NAME}"
statusList+=($retval)
+### TEST 6
+TEST_NAME="SKB SOCKET TEARDOWN"
+
+vethXDPgeneric ${VETH0} ${VETH1} ${NS1}
+
+params=("-S" "-T")
+execxdpxceiver params
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
+### TEST 7
+TEST_NAME="DRV SOCKET TEARDOWN"
+
+vethXDPnative ${VETH0} ${VETH1} ${NS1}
+
+params=("-N" "-T")
+execxdpxceiver params
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
## END TESTS
cleanup_exit ${VETH0} ${VETH1} ${NS1}
diff --git a/tools/testing/selftests/bpf/xdpxceiver.c b/tools/testing/selftests/bpf/xdpxceiver.c
index 9fcd80a38b07..e8907109782d 100644
--- a/tools/testing/selftests/bpf/xdpxceiver.c
+++ b/tools/testing/selftests/bpf/xdpxceiver.c
@@ -26,6 +26,9 @@
* generic XDP path. XDP hook from netif_receive_skb().
* a. nopoll - soft-irq processing
* b. poll - using poll() syscall
+ * c. Socket Teardown
+ * Create a Tx and a Rx socket, Tx from one socket, Rx on another. Destroy
+ * both sockets, then repeat multiple times. Only nopoll mode is used
*
* 2. AF_XDP DRV/Native mode
* Works on any netdevice with XDP_REDIRECT support, driver dependent. Processes
@@ -33,10 +36,11 @@
* hook available just after DMA of buffer descriptor.
* a. nopoll
* b. poll
+ * c. Socket Teardown
* - Only copy mode is supported because veth does not currently support
* zero-copy mode
*
- * Total tests: 4
+ * Total tests: 6
*
* Flow:
* -----
@@ -97,7 +101,8 @@ static void __exit_with_error(int error, const char *file, const char *func, int
#define exit_with_error(error) __exit_with_error(error, __FILE__, __func__, __LINE__)
#define print_ksft_result(void)\
- (ksft_test_result_pass("PASS: %s %s\n", uut ? "DRV" : "SKB", opt_poll ? "POLL" : "NOPOLL"))
+ (ksft_test_result_pass("PASS: %s %s %s\n", uut ? "DRV" : "SKB", opt_poll ? "POLL" :\
+ "NOPOLL", opt_teardown ? "Socket Teardown" : ""))
static void pthread_init_mutex(void)
{
@@ -322,6 +327,7 @@ static struct option long_options[] = {
{"xdp-skb", no_argument, 0, 'S'},
{"xdp-native", no_argument, 0, 'N'},
{"copy", no_argument, 0, 'c'},
+ {"tear-down", no_argument, 0, 'T'},
{"debug", optional_argument, 0, 'D'},
{"tx-pkt-count", optional_argument, 0, 'C'},
{0, 0, 0, 0}
@@ -338,6 +344,7 @@ static void usage(const char *prog)
" -S, --xdp-skb=n Use XDP SKB mode\n"
" -N, --xdp-native=n Enforce XDP DRV (native) mode\n"
" -c, --copy Force copy mode\n"
+ " -T, --tear-down Tear down sockets by repeatedly recreating them\n"
" -D, --debug Debug mode - dump packets L2 - L5\n"
" -C, --tx-pkt-count=n Number of packets to send\n";
ksft_print_msg(str, prog);
@@ -428,7 +435,7 @@ static void parse_command_line(int argc, char **argv)
opterr = 0;
for (;;) {
- c = getopt_long(argc, argv, "i:q:pSNcDC:", long_options, &option_index);
+ c = getopt_long(argc, argv, "i:q:pSNcTDC:", long_options, &option_index);
if (c == -1)
break;
@@ -467,6 +474,9 @@ static void parse_command_line(int argc, char **argv)
case 'c':
opt_xdp_bind_flags |= XDP_COPY;
break;
+ case 'T':
+ opt_teardown = 1;
+ break;
case 'D':
debug_pkt_dump = 1;
break;
@@ -871,6 +881,9 @@ static void *worker_testapp_validate(void *arg)
ksft_print_msg("Received %d packets on interface %s\n",
pkt_counter, ((struct ifobject *)arg)->ifname);
+
+ if (opt_teardown)
+ ksft_print_msg("Destroying socket\n");
}
xsk_socket__delete(((struct ifobject *)arg)->xsk->xsk);
@@ -916,6 +929,20 @@ static void testapp_validate(void)
free(pkt_buf);
}
+ if (!opt_teardown)
+ print_ksft_result();
+}
+
+static void testapp_sockets(void)
+{
+ for (int i = 0; i < MAX_TEARDOWN_ITER; i++) {
+ pkt_counter = 0;
+ prev_pkt = -1;
+ sigvar = 0;
+ ksft_print_msg("Creating socket\n");
+ testapp_validate();
+ }
+
print_ksft_result();
}
@@ -982,7 +1009,7 @@ int main(int argc, char **argv)
ksft_set_plan(1);
- testapp_validate();
+ opt_teardown ? testapp_sockets() : testapp_validate();
for (int i = 0; i < MAX_INTERFACES; i++)
free(ifdict[i]);
diff --git a/tools/testing/selftests/bpf/xdpxceiver.h b/tools/testing/selftests/bpf/xdpxceiver.h
index 12070d66344b..58185b914f99 100644
--- a/tools/testing/selftests/bpf/xdpxceiver.h
+++ b/tools/testing/selftests/bpf/xdpxceiver.h
@@ -21,6 +21,7 @@
#define MAX_INTERFACE_NAME_CHARS 7
#define MAX_INTERFACES_NAMESPACE_CHARS 10
#define MAX_SOCKS 1
+#define MAX_TEARDOWN_ITER 10
#define PKT_HDR_SIZE (sizeof(struct ethhdr) + sizeof(struct iphdr) + \
sizeof(struct udphdr))
#define MIN_PKT_SIZE 64
@@ -57,6 +58,7 @@ static u32 opt_xdp_flags = XDP_FLAGS_UPDATE_IF_NOEXIST;
static int opt_queue;
static int opt_pkt_count;
static int opt_poll;
+static int opt_teardown;
static u32 opt_xdp_bind_flags = XDP_USE_NEED_WAKEUP;
static u8 pkt_data[XSK_UMEM__DEFAULT_FRAME_SIZE];
static u32 pkt_counter;
--
2.20.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH bpf-next v4 5/5] selftests/bpf: xsk selftests - Bi-directional Sockets - SKB, DRV
2020-12-07 21:53 [PATCH bpf-next v4 0/5] selftests/bpf: xsk selftests Weqaar Janjua
` (3 preceding siblings ...)
2020-12-07 21:53 ` [PATCH bpf-next v4 4/5] selftests/bpf: xsk selftests - Socket Teardown - SKB, DRV Weqaar Janjua
@ 2020-12-07 21:53 ` Weqaar Janjua
2020-12-08 3:56 ` [PATCH bpf-next v4 0/5] selftests/bpf: xsk selftests Yonghong Song
2020-12-09 16:00 ` patchwork-bot+netdevbpf
6 siblings, 0 replies; 11+ messages in thread
From: Weqaar Janjua @ 2020-12-07 21:53 UTC (permalink / raw)
To: bpf, netdev, daniel, ast, yhs, magnus.karlsson, bjorn.topel
Cc: Weqaar Janjua, shuah, skhan, linux-kselftest, anders.roxell,
jonathan.lemon
Adds following tests:
1. AF_XDP SKB mode
d. Bi-directional Sockets
Configure sockets as bi-directional tx/rx sockets, sets up fill
and completion rings on each socket, tx/rx in both directions.
Only nopoll mode is used
2. AF_XDP DRV/Native mode
d. Bi-directional Sockets
* Only copy mode is supported because veth does not currently support
zero-copy mode
Signed-off-by: Weqaar Janjua <weqaar.a.janjua@intel.com>
---
tools/testing/selftests/bpf/test_xsk.sh | 24 ++++++
tools/testing/selftests/bpf/xdpxceiver.c | 100 +++++++++++++++++------
tools/testing/selftests/bpf/xdpxceiver.h | 4 +
3 files changed, 104 insertions(+), 24 deletions(-)
diff --git a/tools/testing/selftests/bpf/test_xsk.sh b/tools/testing/selftests/bpf/test_xsk.sh
index 9be9dff25560..88a7483eaae4 100755
--- a/tools/testing/selftests/bpf/test_xsk.sh
+++ b/tools/testing/selftests/bpf/test_xsk.sh
@@ -221,6 +221,30 @@ retval=$?
test_status $retval "${TEST_NAME}"
statusList+=($retval)
+### TEST 8
+TEST_NAME="SKB BIDIRECTIONAL SOCKETS"
+
+vethXDPgeneric ${VETH0} ${VETH1} ${NS1}
+
+params=("-S" "-B")
+execxdpxceiver params
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
+### TEST 9
+TEST_NAME="DRV BIDIRECTIONAL SOCKETS"
+
+vethXDPnative ${VETH0} ${VETH1} ${NS1}
+
+params=("-N" "-B")
+execxdpxceiver params
+
+retval=$?
+test_status $retval "${TEST_NAME}"
+statusList+=($retval)
+
## END TESTS
cleanup_exit ${VETH0} ${VETH1} ${NS1}
diff --git a/tools/testing/selftests/bpf/xdpxceiver.c b/tools/testing/selftests/bpf/xdpxceiver.c
index e8907109782d..014dedaa4dd2 100644
--- a/tools/testing/selftests/bpf/xdpxceiver.c
+++ b/tools/testing/selftests/bpf/xdpxceiver.c
@@ -29,6 +29,10 @@
* c. Socket Teardown
* Create a Tx and a Rx socket, Tx from one socket, Rx on another. Destroy
* both sockets, then repeat multiple times. Only nopoll mode is used
+ * d. Bi-directional sockets
+ * Configure sockets as bi-directional tx/rx sockets, sets up fill and
+ * completion rings on each socket, tx/rx in both directions. Only nopoll
+ * mode is used
*
* 2. AF_XDP DRV/Native mode
* Works on any netdevice with XDP_REDIRECT support, driver dependent. Processes
@@ -37,10 +41,11 @@
* a. nopoll
* b. poll
* c. Socket Teardown
+ * d. Bi-directional sockets
* - Only copy mode is supported because veth does not currently support
* zero-copy mode
*
- * Total tests: 6
+ * Total tests: 8
*
* Flow:
* -----
@@ -101,8 +106,9 @@ static void __exit_with_error(int error, const char *file, const char *func, int
#define exit_with_error(error) __exit_with_error(error, __FILE__, __func__, __LINE__)
#define print_ksft_result(void)\
- (ksft_test_result_pass("PASS: %s %s %s\n", uut ? "DRV" : "SKB", opt_poll ? "POLL" :\
- "NOPOLL", opt_teardown ? "Socket Teardown" : ""))
+ (ksft_test_result_pass("PASS: %s %s %s%s\n", uut ? "DRV" : "SKB", opt_poll ? "POLL" :\
+ "NOPOLL", opt_teardown ? "Socket Teardown" : "",\
+ opt_bidi ? "Bi-directional Sockets" : ""))
static void pthread_init_mutex(void)
{
@@ -308,8 +314,13 @@ static int xsk_configure_socket(struct ifobject *ifobject)
cfg.xdp_flags = opt_xdp_flags;
cfg.bind_flags = opt_xdp_bind_flags;
- rxr = (ifobject->fv.vector == rx) ? &ifobject->xsk->rx : NULL;
- txr = (ifobject->fv.vector == tx) ? &ifobject->xsk->tx : NULL;
+ if (!opt_bidi) {
+ rxr = (ifobject->fv.vector == rx) ? &ifobject->xsk->rx : NULL;
+ txr = (ifobject->fv.vector == tx) ? &ifobject->xsk->tx : NULL;
+ } else {
+ rxr = &ifobject->xsk->rx;
+ txr = &ifobject->xsk->tx;
+ }
ret = xsk_socket__create(&ifobject->xsk->xsk, ifobject->ifname,
opt_queue, ifobject->umem->umem, rxr, txr, &cfg);
@@ -328,6 +339,7 @@ static struct option long_options[] = {
{"xdp-native", no_argument, 0, 'N'},
{"copy", no_argument, 0, 'c'},
{"tear-down", no_argument, 0, 'T'},
+ {"bidi", optional_argument, 0, 'B'},
{"debug", optional_argument, 0, 'D'},
{"tx-pkt-count", optional_argument, 0, 'C'},
{0, 0, 0, 0}
@@ -345,6 +357,7 @@ static void usage(const char *prog)
" -N, --xdp-native=n Enforce XDP DRV (native) mode\n"
" -c, --copy Force copy mode\n"
" -T, --tear-down Tear down sockets by repeatedly recreating them\n"
+ " -B, --bidi Bi-directional sockets test\n"
" -D, --debug Debug mode - dump packets L2 - L5\n"
" -C, --tx-pkt-count=n Number of packets to send\n";
ksft_print_msg(str, prog);
@@ -435,7 +448,7 @@ static void parse_command_line(int argc, char **argv)
opterr = 0;
for (;;) {
- c = getopt_long(argc, argv, "i:q:pSNcTDC:", long_options, &option_index);
+ c = getopt_long(argc, argv, "i:q:pSNcTBDC:", long_options, &option_index);
if (c == -1)
break;
@@ -477,6 +490,9 @@ static void parse_command_line(int argc, char **argv)
case 'T':
opt_teardown = 1;
break;
+ case 'B':
+ opt_bidi = 1;
+ break;
case 'D':
debug_pkt_dump = 1;
break;
@@ -802,22 +818,25 @@ static void *worker_testapp_validate(void *arg)
struct generic_data *data = (struct generic_data *)malloc(sizeof(struct generic_data));
struct iphdr *ip_hdr = (struct iphdr *)(pkt_data + sizeof(struct ethhdr));
struct ethhdr *eth_hdr = (struct ethhdr *)pkt_data;
- void *bufs;
+ void *bufs = NULL;
pthread_attr_setstacksize(&attr, THREAD_STACK);
- bufs = mmap(NULL, num_frames * XSK_UMEM__DEFAULT_FRAME_SIZE,
- PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
- if (bufs == MAP_FAILED)
- exit_with_error(errno);
+ if (!bidi_pass) {
+ bufs = mmap(NULL, num_frames * XSK_UMEM__DEFAULT_FRAME_SIZE,
+ PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+ if (bufs == MAP_FAILED)
+ exit_with_error(errno);
- if (strcmp(((struct ifobject *)arg)->nsname, ""))
- switch_namespace(((struct ifobject *)arg)->ifdict_index);
+ if (strcmp(((struct ifobject *)arg)->nsname, ""))
+ switch_namespace(((struct ifobject *)arg)->ifdict_index);
+ }
if (((struct ifobject *)arg)->fv.vector == tx) {
int spinningrxctr = 0;
- thread_common_ops(arg, bufs, &sync_mutex_tx, &spinning_tx);
+ if (!bidi_pass)
+ thread_common_ops(arg, bufs, &sync_mutex_tx, &spinning_tx);
while (atomic_load(&spinning_rx) && spinningrxctr < SOCK_RECONF_CTR) {
spinningrxctr++;
@@ -847,7 +866,8 @@ static void *worker_testapp_validate(void *arg)
struct pollfd fds[MAX_SOCKS] = { };
int ret;
- thread_common_ops(arg, bufs, &sync_mutex_tx, &spinning_rx);
+ if (!bidi_pass)
+ thread_common_ops(arg, bufs, &sync_mutex_tx, &spinning_rx);
ksft_print_msg("Interface [%s] vector [Rx]\n", ((struct ifobject *)arg)->ifname);
xsk_populate_fill_ring(((struct ifobject *)arg)->umem);
@@ -886,8 +906,10 @@ static void *worker_testapp_validate(void *arg)
ksft_print_msg("Destroying socket\n");
}
- xsk_socket__delete(((struct ifobject *)arg)->xsk->xsk);
- (void)xsk_umem__delete(((struct ifobject *)arg)->umem->umem);
+ if (!opt_bidi || (opt_bidi && bidi_pass)) {
+ xsk_socket__delete(((struct ifobject *)arg)->xsk->xsk);
+ (void)xsk_umem__delete(((struct ifobject *)arg)->umem->umem);
+ }
pthread_exit(NULL);
}
@@ -896,11 +918,26 @@ static void testapp_validate(void)
pthread_attr_init(&attr);
pthread_attr_setstacksize(&attr, THREAD_STACK);
+ if (opt_bidi && bidi_pass) {
+ pthread_init_mutex();
+ if (!switching_notify) {
+ ksft_print_msg("Switching Tx/Rx vectors\n");
+ switching_notify++;
+ }
+ }
+
pthread_mutex_lock(&sync_mutex);
/*Spawn RX thread */
- if (pthread_create(&t0, &attr, worker_testapp_validate, (void *)ifdict[1]))
- exit_with_error(errno);
+ if (!opt_bidi || (opt_bidi && !bidi_pass)) {
+ if (pthread_create(&t0, &attr, worker_testapp_validate, (void *)ifdict[1]))
+ exit_with_error(errno);
+ } else if (opt_bidi && bidi_pass) {
+ /*switch Tx/Rx vectors */
+ ifdict[0]->fv.vector = rx;
+ if (pthread_create(&t0, &attr, worker_testapp_validate, (void *)ifdict[0]))
+ exit_with_error(errno);
+ }
struct timespec max_wait = { 0, 0 };
@@ -914,8 +951,15 @@ static void testapp_validate(void)
pthread_mutex_unlock(&sync_mutex);
/*Spawn TX thread */
- if (pthread_create(&t1, &attr, worker_testapp_validate, (void *)ifdict[0]))
- exit_with_error(errno);
+ if (!opt_bidi || (opt_bidi && !bidi_pass)) {
+ if (pthread_create(&t1, &attr, worker_testapp_validate, (void *)ifdict[0]))
+ exit_with_error(errno);
+ } else if (opt_bidi && bidi_pass) {
+ /*switch Tx/Rx vectors */
+ ifdict[1]->fv.vector = tx;
+ if (pthread_create(&t1, &attr, worker_testapp_validate, (void *)ifdict[1]))
+ exit_with_error(errno);
+ }
pthread_join(t1, NULL);
pthread_join(t0, NULL);
@@ -929,18 +973,19 @@ static void testapp_validate(void)
free(pkt_buf);
}
- if (!opt_teardown)
+ if (!opt_teardown && !opt_bidi)
print_ksft_result();
}
static void testapp_sockets(void)
{
- for (int i = 0; i < MAX_TEARDOWN_ITER; i++) {
+ for (int i = 0; i < (opt_teardown ? MAX_TEARDOWN_ITER : MAX_BIDI_ITER); i++) {
pkt_counter = 0;
prev_pkt = -1;
sigvar = 0;
ksft_print_msg("Creating socket\n");
testapp_validate();
+ opt_bidi ? bidi_pass++ : bidi_pass;
}
print_ksft_result();
@@ -1009,7 +1054,14 @@ int main(int argc, char **argv)
ksft_set_plan(1);
- opt_teardown ? testapp_sockets() : testapp_validate();
+ if (!opt_teardown && !opt_bidi) {
+ testapp_validate();
+ } else if (opt_teardown && opt_bidi) {
+ ksft_test_result_fail("ERROR: parameters -T and -B cannot be used together\n");
+ ksft_exit_xfail();
+ } else {
+ testapp_sockets();
+ }
for (int i = 0; i < MAX_INTERFACES; i++)
free(ifdict[i]);
diff --git a/tools/testing/selftests/bpf/xdpxceiver.h b/tools/testing/selftests/bpf/xdpxceiver.h
index 58185b914f99..61f595b6f200 100644
--- a/tools/testing/selftests/bpf/xdpxceiver.h
+++ b/tools/testing/selftests/bpf/xdpxceiver.h
@@ -22,6 +22,7 @@
#define MAX_INTERFACES_NAMESPACE_CHARS 10
#define MAX_SOCKS 1
#define MAX_TEARDOWN_ITER 10
+#define MAX_BIDI_ITER 2
#define PKT_HDR_SIZE (sizeof(struct ethhdr) + sizeof(struct iphdr) + \
sizeof(struct udphdr))
#define MIN_PKT_SIZE 64
@@ -53,12 +54,15 @@ enum TESTS {
u8 uut;
u8 debug_pkt_dump;
u32 num_frames;
+u8 switching_notify;
+u8 bidi_pass;
static u32 opt_xdp_flags = XDP_FLAGS_UPDATE_IF_NOEXIST;
static int opt_queue;
static int opt_pkt_count;
static int opt_poll;
static int opt_teardown;
+static int opt_bidi;
static u32 opt_xdp_bind_flags = XDP_USE_NEED_WAKEUP;
static u8 pkt_data[XSK_UMEM__DEFAULT_FRAME_SIZE];
static u32 pkt_counter;
--
2.20.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH bpf-next v4 0/5] selftests/bpf: xsk selftests
2020-12-07 21:53 [PATCH bpf-next v4 0/5] selftests/bpf: xsk selftests Weqaar Janjua
` (4 preceding siblings ...)
2020-12-07 21:53 ` [PATCH bpf-next v4 5/5] selftests/bpf: xsk selftests - Bi-directional Sockets " Weqaar Janjua
@ 2020-12-08 3:56 ` Yonghong Song
2020-12-08 7:03 ` Björn Töpel
2020-12-09 16:00 ` patchwork-bot+netdevbpf
6 siblings, 1 reply; 11+ messages in thread
From: Yonghong Song @ 2020-12-08 3:56 UTC (permalink / raw)
To: Weqaar Janjua, bpf, netdev, daniel, ast, magnus.karlsson, bjorn.topel
Cc: Weqaar Janjua, shuah, skhan, linux-kselftest, anders.roxell,
jonathan.lemon
On 12/7/20 1:53 PM, Weqaar Janjua wrote:
> This patch set adds AF_XDP selftests based on veth to selftests/bpf.
>
> # Topology:
> # ---------
> # -----------
> # _ | Process | _
> # / ----------- \
> # / | \
> # / | \
> # ----------- | -----------
> # | Thread1 | | | Thread2 |
> # ----------- | -----------
> # | | |
> # ----------- | -----------
> # | xskX | | | xskY |
> # ----------- | -----------
> # | | |
> # ----------- | ----------
> # | vethX | --------- | vethY |
> # ----------- peer ----------
> # | | |
> # namespaceX | namespaceY
>
> These selftests test AF_XDP SKB and Native/DRV modes using veth Virtual
> Ethernet interfaces.
>
> The test program contains two threads, each thread is single socket with
> a unique UMEM. It validates in-order packet delivery and packet content
> by sending packets to each other.
>
> Prerequisites setup by script test_xsk.sh:
>
> Set up veth interfaces as per the topology shown ^^:
> * setup two veth interfaces and one namespace
> ** veth<xxxx> in root namespace
> ** veth<yyyy> in af_xdp<xxxx> namespace
> ** namespace af_xdp<xxxx>
> * create a spec file veth.spec that includes this run-time configuration
> *** xxxx and yyyy are randomly generated 4 digit numbers used to avoid
> conflict with any existing interface
>
> Adds xsk framework test to validate veth xdp DRV and SKB modes.
>
> The following tests are provided:
>
> 1. AF_XDP SKB mode
> Generic mode XDP is driver independent, used when the driver does
> not have support for XDP. Works on any netdevice using sockets and
> generic XDP path. XDP hook from netif_receive_skb().
> a. nopoll - soft-irq processing
> b. poll - using poll() syscall
> c. Socket Teardown
> Create a Tx and a Rx socket, Tx from one socket, Rx on another.
> Destroy both sockets, then repeat multiple times. Only nopoll mode
> is used
> d. Bi-directional Sockets
> Configure sockets as bi-directional tx/rx sockets, sets up fill
> and completion rings on each socket, tx/rx in both directions.
> Only nopoll mode is used
>
> 2. AF_XDP DRV/Native mode
> Works on any netdevice with XDP_REDIRECT support, driver dependent.
> Processes packets before SKB allocation. Provides better performance
> than SKB. Driver hook available just after DMA of buffer descriptor.
> a. nopoll
> b. poll
> c. Socket Teardown
> d. Bi-directional Sockets
> * Only copy mode is supported because veth does not currently support
> zero-copy mode
>
> Total tests: 8
>
> Flow:
> * Single process spawns two threads: Tx and Rx
> * Each of these two threads attach to a veth interface within their
> assigned namespaces
> * Each thread creates one AF_XDP socket connected to a unique umem
> for each veth interface
> * Tx thread transmits 10k packets from veth<xxxx> to veth<yyyy>
> * Rx thread verifies if all 10k packets were received and delivered
> in-order, and have the right content
>
> v2 changes:
> * Move selftests/xsk to selftests/bpf
> * Remove Makefiles under selftests/xsk, and utilize selftests/bpf/Makefile
>
> v3 changes:
> * merge all test scripts test_xsk_*.sh into test_xsk.sh
>
> v4 changes:
> * merge xsk_env.sh into xsk_prereqs.sh
> * test_xsk.sh add cliarg -c for color-coded output
> * test_xsk.sh PREREQUISITES disables IPv6 on veth interfaces
> * test_xsk.sh PREREQUISITES adds xsk framework test
> * test_xsk.sh is independently executable
> * xdpxceiver.c Tx/Rx validates only IPv4 packets with TOS 0x9, ignores
> others
>
> Structure of the patch set:
>
> Patch 1: Adds XSK selftests framework and test under selftests/bpf
> Patch 2: Adds tests: SKB poll and nopoll mode, and mac-ip-udp debug
> Patch 3: Adds tests: DRV poll and nopoll mode
> Patch 4: Adds tests: SKB and DRV Socket Teardown
> Patch 5: Adds tests: SKB and DRV Bi-directional Sockets
>
> Thanks: Weqaar
>
> Weqaar Janjua (5):
> selftests/bpf: xsk selftests framework
> selftests/bpf: xsk selftests - SKB POLL, NOPOLL
> selftests/bpf: xsk selftests - DRV POLL, NOPOLL
> selftests/bpf: xsk selftests - Socket Teardown - SKB, DRV
> selftests/bpf: xsk selftests - Bi-directional Sockets - SKB, DRV
>
> tools/testing/selftests/bpf/Makefile | 7 +-
> tools/testing/selftests/bpf/test_xsk.sh | 259 +++++
> tools/testing/selftests/bpf/xdpxceiver.c | 1074 ++++++++++++++++++++
> tools/testing/selftests/bpf/xdpxceiver.h | 160 +++
> tools/testing/selftests/bpf/xsk_prereqs.sh | 135 +++
> 5 files changed, 1633 insertions(+), 2 deletions(-)
> create mode 100755 tools/testing/selftests/bpf/test_xsk.sh
> create mode 100644 tools/testing/selftests/bpf/xdpxceiver.c
> create mode 100644 tools/testing/selftests/bpf/xdpxceiver.h
> create mode 100755 tools/testing/selftests/bpf/xsk_prereqs.sh
All tests passed in my environment.
Tested-by: Yonghong Song <yhs@fb.com>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH bpf-next v4 0/5] selftests/bpf: xsk selftests
2020-12-08 3:56 ` [PATCH bpf-next v4 0/5] selftests/bpf: xsk selftests Yonghong Song
@ 2020-12-08 7:03 ` Björn Töpel
0 siblings, 0 replies; 11+ messages in thread
From: Björn Töpel @ 2020-12-08 7:03 UTC (permalink / raw)
To: Yonghong Song, Weqaar Janjua, bpf, netdev, daniel, ast, magnus.karlsson
Cc: Weqaar Janjua, shuah, skhan, linux-kselftest, anders.roxell,
jonathan.lemon
On 2020-12-08 04:56, Yonghong Song wrote:
> On 12/7/20 1:53 PM, Weqaar Janjua wrote:
>> This patch set adds AF_XDP selftests based on veth to selftests/bpf.
[...]
>
> All tests passed in my environment.
> Tested-by: Yonghong Song <yhs@fb.com>
>
Thanks for the hard work, Weqaar! And thanks Yonghong for testing/feedback.
From my perspective this is a good selftest base for AF_XDP, and
something we can continue to build on.
For the series:
Acked-by: Björn Töpel <bjorn.topel@intel.com>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH bpf-next v4 0/5] selftests/bpf: xsk selftests
2020-12-07 21:53 [PATCH bpf-next v4 0/5] selftests/bpf: xsk selftests Weqaar Janjua
` (5 preceding siblings ...)
2020-12-08 3:56 ` [PATCH bpf-next v4 0/5] selftests/bpf: xsk selftests Yonghong Song
@ 2020-12-09 16:00 ` patchwork-bot+netdevbpf
6 siblings, 0 replies; 11+ messages in thread
From: patchwork-bot+netdevbpf @ 2020-12-09 16:00 UTC (permalink / raw)
To: Weqaar Janjua
Cc: bpf, netdev, daniel, ast, yhs, magnus.karlsson, bjorn.topel,
weqaar.a.janjua, shuah, skhan, linux-kselftest, anders.roxell,
jonathan.lemon
Hello:
This series was applied to bpf/bpf-next.git (refs/heads/master):
On Mon, 7 Dec 2020 21:53:28 +0000 you wrote:
> This patch set adds AF_XDP selftests based on veth to selftests/bpf.
>
> # Topology:
> # ---------
> # -----------
> # _ | Process | _
> # / ----------- \
> # / | \
> # / | \
> # ----------- | -----------
> # | Thread1 | | | Thread2 |
> # ----------- | -----------
> # | | |
> # ----------- | -----------
> # | xskX | | | xskY |
> # ----------- | -----------
> # | | |
> # ----------- | ----------
> # | vethX | --------- | vethY |
> # ----------- peer ----------
> # | | |
> # namespaceX | namespaceY
>
> [...]
Here is the summary with links:
- [bpf-next,v4,1/5] selftests/bpf: xsk selftests framework
https://git.kernel.org/bpf/bpf-next/c/a89052572ebb
- [bpf-next,v4,2/5] selftests/bpf: xsk selftests - SKB POLL, NOPOLL
https://git.kernel.org/bpf/bpf-next/c/facb7cb2e909
- [bpf-next,v4,3/5] selftests/bpf: xsk selftests - DRV POLL, NOPOLL
https://git.kernel.org/bpf/bpf-next/c/9103a8594d93
- [bpf-next,v4,4/5] selftests/bpf: xsk selftests - Socket Teardown - SKB, DRV
https://git.kernel.org/bpf/bpf-next/c/6674bf66560a
- [bpf-next,v4,5/5] selftests/bpf: xsk selftests - Bi-directional Sockets - SKB, DRV
https://git.kernel.org/bpf/bpf-next/c/7d20441eb05e
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH bpf-next v4 2/5] selftests/bpf: xsk selftests - SKB POLL, NOPOLL
2020-12-07 21:53 ` [PATCH bpf-next v4 2/5] selftests/bpf: xsk selftests - SKB POLL, NOPOLL Weqaar Janjua
@ 2020-12-09 18:29 ` Yonghong Song
2020-12-10 11:55 ` Weqaar Janjua
0 siblings, 1 reply; 11+ messages in thread
From: Yonghong Song @ 2020-12-09 18:29 UTC (permalink / raw)
To: Weqaar Janjua, bpf, netdev, daniel, ast, magnus.karlsson, bjorn.topel
Cc: Weqaar Janjua, shuah, skhan, linux-kselftest, anders.roxell,
jonathan.lemon
On 12/7/20 1:53 PM, Weqaar Janjua wrote:
> Adds following tests:
>
> 1. AF_XDP SKB mode
> Generic mode XDP is driver independent, used when the driver does
> not have support for XDP. Works on any netdevice using sockets and
> generic XDP path. XDP hook from netif_receive_skb().
> a. nopoll - soft-irq processing
> b. poll - using poll() syscall
>
> Signed-off-by: Weqaar Janjua <weqaar.a.janjua@intel.com>
> ---
> tools/testing/selftests/bpf/Makefile | 3 +-
> tools/testing/selftests/bpf/test_xsk.sh | 39 +-
> tools/testing/selftests/bpf/xdpxceiver.c | 979 +++++++++++++++++++++
> tools/testing/selftests/bpf/xdpxceiver.h | 153 ++++
> tools/testing/selftests/bpf/xsk_prereqs.sh | 16 +
> 5 files changed, 1187 insertions(+), 3 deletions(-)
> create mode 100644 tools/testing/selftests/bpf/xdpxceiver.c
> create mode 100644 tools/testing/selftests/bpf/xdpxceiver.h
>
> diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
> index 6a1ddfe68f15..944ae17a39ed 100644
> --- a/tools/testing/selftests/bpf/Makefile
> +++ b/tools/testing/selftests/bpf/Makefile
> @@ -82,7 +82,8 @@ TEST_PROGS_EXTENDED := with_addr.sh \
> # Compile but not part of 'make run_tests'
> TEST_GEN_PROGS_EXTENDED = test_sock_addr test_skb_cgroup_id_user \
> flow_dissector_load test_flow_dissector test_tcp_check_syncookie_user \
> - test_lirc_mode2_user xdping test_cpp runqslower bench bpf_testmod.ko
> + test_lirc_mode2_user xdping test_cpp runqslower bench bpf_testmod.ko \
> + xdpxceiver
Could you have a patch to put xdpxceiver in .gitignore?
I see below:
Untracked files:
(use "git add <file>..." to include in what will be committed)
tools/testing/selftests/bpf/xdpxceiver
>
> TEST_CUSTOM_PROGS = urandom_read
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH bpf-next v4 2/5] selftests/bpf: xsk selftests - SKB POLL, NOPOLL
2020-12-09 18:29 ` Yonghong Song
@ 2020-12-10 11:55 ` Weqaar Janjua
0 siblings, 0 replies; 11+ messages in thread
From: Weqaar Janjua @ 2020-12-10 11:55 UTC (permalink / raw)
To: Yonghong Song
Cc: bpf, netdev, Daniel Borkmann, ast, Magnus Karlsson,
Björn Töpel, Weqaar Janjua, shuah, skhan,
linux-kselftest, Anders Roxell, jonathan.lemon
On Wed, 9 Dec 2020 at 18:29, Yonghong Song <yhs@fb.com> wrote:
>
>
>
> On 12/7/20 1:53 PM, Weqaar Janjua wrote:
> > Adds following tests:
> >
> > 1. AF_XDP SKB mode
> > Generic mode XDP is driver independent, used when the driver does
> > not have support for XDP. Works on any netdevice using sockets and
> > generic XDP path. XDP hook from netif_receive_skb().
> > a. nopoll - soft-irq processing
> > b. poll - using poll() syscall
> >
> > Signed-off-by: Weqaar Janjua <weqaar.a.janjua@intel.com>
> > ---
> > tools/testing/selftests/bpf/Makefile | 3 +-
> > tools/testing/selftests/bpf/test_xsk.sh | 39 +-
> > tools/testing/selftests/bpf/xdpxceiver.c | 979 +++++++++++++++++++++
> > tools/testing/selftests/bpf/xdpxceiver.h | 153 ++++
> > tools/testing/selftests/bpf/xsk_prereqs.sh | 16 +
> > 5 files changed, 1187 insertions(+), 3 deletions(-)
> > create mode 100644 tools/testing/selftests/bpf/xdpxceiver.c
> > create mode 100644 tools/testing/selftests/bpf/xdpxceiver.h
> >
> > diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
> > index 6a1ddfe68f15..944ae17a39ed 100644
> > --- a/tools/testing/selftests/bpf/Makefile
> > +++ b/tools/testing/selftests/bpf/Makefile
> > @@ -82,7 +82,8 @@ TEST_PROGS_EXTENDED := with_addr.sh \
> > # Compile but not part of 'make run_tests'
> > TEST_GEN_PROGS_EXTENDED = test_sock_addr test_skb_cgroup_id_user \
> > flow_dissector_load test_flow_dissector test_tcp_check_syncookie_user \
> > - test_lirc_mode2_user xdping test_cpp runqslower bench bpf_testmod.ko
> > + test_lirc_mode2_user xdping test_cpp runqslower bench bpf_testmod.ko \
> > + xdpxceiver
>
> Could you have a patch to put xdpxceiver in .gitignore?
>
> I see below:
> Untracked files:
> (use "git add <file>..." to include in what will be committed)
> tools/testing/selftests/bpf/xdpxceiver
>
ACK, patch on the list now
> >
> > TEST_CUSTOM_PROGS = urandom_read
> >
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2020-12-10 11:57 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-12-07 21:53 [PATCH bpf-next v4 0/5] selftests/bpf: xsk selftests Weqaar Janjua
2020-12-07 21:53 ` [PATCH bpf-next v4 1/5] selftests/bpf: xsk selftests framework Weqaar Janjua
2020-12-07 21:53 ` [PATCH bpf-next v4 2/5] selftests/bpf: xsk selftests - SKB POLL, NOPOLL Weqaar Janjua
2020-12-09 18:29 ` Yonghong Song
2020-12-10 11:55 ` Weqaar Janjua
2020-12-07 21:53 ` [PATCH bpf-next v4 3/5] selftests/bpf: xsk selftests - DRV " Weqaar Janjua
2020-12-07 21:53 ` [PATCH bpf-next v4 4/5] selftests/bpf: xsk selftests - Socket Teardown - SKB, DRV Weqaar Janjua
2020-12-07 21:53 ` [PATCH bpf-next v4 5/5] selftests/bpf: xsk selftests - Bi-directional Sockets " Weqaar Janjua
2020-12-08 3:56 ` [PATCH bpf-next v4 0/5] selftests/bpf: xsk selftests Yonghong Song
2020-12-08 7:03 ` Björn Töpel
2020-12-09 16:00 ` patchwork-bot+netdevbpf
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).