From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
To: Linux Doc Mailing List <linux-doc@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>,
Mauro Carvalho Chehab <mchehab@infradead.org>,
linux-kernel@vger.kernel.org, Jonathan Corbet <corbet@lwn.net>,
Chris Zankel <chris@zankel.net>,
Max Filippov <jcmvbkbc@gmail.com>,
linux-xtensa@linux-xtensa.org
Subject: [PATCH v1 30/31] docs: xtensa: convert to ReST
Date: Wed, 12 Jun 2019 15:38:33 -0300 [thread overview]
Message-ID: <cd2fa8ed3001db6dc9634e54a5a40f1d965bc427.1560364494.git.mchehab+samsung@kernel.org> (raw)
In-Reply-To: <cover.1560364493.git.mchehab+samsung@kernel.org>
Rename the xtensa documentation files to ReST, add an
index for them and adjust in order to produce a nice html
output via the Sphinx build system.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
.../xtensa/{atomctl.txt => atomctl.rst} | 13 +-
.../xtensa/{booting.txt => booting.rst} | 5 +-
Documentation/xtensa/index.rst | 12 ++
Documentation/xtensa/mmu.rst | 195 ++++++++++++++++++
Documentation/xtensa/mmu.txt | 189 -----------------
arch/xtensa/include/asm/initialize_mmu.h | 2 +-
6 files changed, 222 insertions(+), 194 deletions(-)
rename Documentation/xtensa/{atomctl.txt => atomctl.rst} (81%)
rename Documentation/xtensa/{booting.txt => booting.rst} (91%)
create mode 100644 Documentation/xtensa/index.rst
create mode 100644 Documentation/xtensa/mmu.rst
delete mode 100644 Documentation/xtensa/mmu.txt
diff --git a/Documentation/xtensa/atomctl.txt b/Documentation/xtensa/atomctl.rst
similarity index 81%
rename from Documentation/xtensa/atomctl.txt
rename to Documentation/xtensa/atomctl.rst
index 1da783ac200c..1ecbd0ba9a2e 100644
--- a/Documentation/xtensa/atomctl.txt
+++ b/Documentation/xtensa/atomctl.rst
@@ -1,3 +1,7 @@
+===========================================
+Atomic Operation Control (ATOMCTL) Register
+===========================================
+
We Have Atomic Operation Control (ATOMCTL) Register.
This register determines the effect of using a S32C1I instruction
with various combinations of:
@@ -8,7 +12,7 @@ with various combinations of:
2. With and without An Intelligent Memory Controller which
can do Atomic Transactions itself.
-The Core comes up with a default value of for the three types of cache ops:
+The Core comes up with a default value of for the three types of cache ops::
0x28: (WB: Internal, WT: Internal, BY:Exception)
@@ -30,15 +34,18 @@ CUSTOMER-WARNING:
Developers might find using RCW in Bypass mode convenient when testing
with the cache being bypassed; for example studying cache alias problems.
-See Section 4.3.12.4 of ISA; Bits:
+See Section 4.3.12.4 of ISA; Bits::
WB WT BY
5 4 | 3 2 | 1 0
+
+========= ================== ================== ===============
2 Bit
Field
Values WB - Write Back WT - Write Thru BY - Bypass
---------- --------------- ----------------- ----------------
+========= ================== ================== ===============
0 Exception Exception Exception
1 RCW Transaction RCW Transaction RCW Transaction
2 Internal Operation Internal Operation Reserved
3 Reserved Reserved Reserved
+========= ================== ================== ===============
diff --git a/Documentation/xtensa/booting.txt b/Documentation/xtensa/booting.rst
similarity index 91%
rename from Documentation/xtensa/booting.txt
rename to Documentation/xtensa/booting.rst
index 402b33a2619f..e1b83707e5b6 100644
--- a/Documentation/xtensa/booting.txt
+++ b/Documentation/xtensa/booting.rst
@@ -1,10 +1,13 @@
-Passing boot parameters to the kernel.
+=====================================
+Passing boot parameters to the kernel
+=====================================
Boot parameters are represented as a TLV list in the memory. Please see
arch/xtensa/include/asm/bootparam.h for definition of the bp_tag structure and
tag value constants. First entry in the list must have type BP_TAG_FIRST, last
entry must have type BP_TAG_LAST. The address of the first list entry is
passed to the kernel in the register a2. The address type depends on MMU type:
+
- For configurations without MMU, with region protection or with MPU the
address must be the physical address.
- For configurations with region translarion MMU or with MMUv3 and CONFIG_MMU=n
diff --git a/Documentation/xtensa/index.rst b/Documentation/xtensa/index.rst
new file mode 100644
index 000000000000..5a24e365e35f
--- /dev/null
+++ b/Documentation/xtensa/index.rst
@@ -0,0 +1,12 @@
+:orphan:
+
+===================
+Xtensa Architecture
+===================
+
+.. toctree::
+ :maxdepth: 1
+
+ atomctl
+ booting
+ mmu
diff --git a/Documentation/xtensa/mmu.rst b/Documentation/xtensa/mmu.rst
new file mode 100644
index 000000000000..e52a12960fdc
--- /dev/null
+++ b/Documentation/xtensa/mmu.rst
@@ -0,0 +1,195 @@
+=============================
+MMUv3 initialization sequence
+=============================
+
+The code in the initialize_mmu macro sets up MMUv3 memory mapping
+identically to MMUv2 fixed memory mapping. Depending on
+CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX symbol this code is
+located in addresses it was linked for (symbol undefined), or not
+(symbol defined), so it needs to be position-independent.
+
+The code has the following assumptions:
+
+ - This code fragment is run only on an MMU v3.
+ - TLBs are in their reset state.
+ - ITLBCFG and DTLBCFG are zero (reset state).
+ - RASID is 0x04030201 (reset state).
+ - PS.RING is zero (reset state).
+ - LITBASE is zero (reset state, PC-relative literals); required to be PIC.
+
+TLB setup proceeds along the following steps.
+
+ Legend:
+
+ - VA = virtual address (two upper nibbles of it);
+ - PA = physical address (two upper nibbles of it);
+ - pc = physical range that contains this code;
+
+After step 2, we jump to virtual address in the range 0x40000000..0x5fffffff
+or 0x00000000..0x1fffffff, depending on whether the kernel was loaded below
+0x40000000 or above. That address corresponds to next instruction to execute
+in this code. After step 4, we jump to intended (linked) address of this code.
+The scheme below assumes that the kernel is loaded below 0x40000000.
+
+ ====== ===== ===== ===== ===== ====== ===== =====
+ - Step0 Step1 Step2 Step3 Step4 Step5
+
+ VA PA PA PA PA VA PA PA
+ ====== ===== ===== ===== ===== ====== ===== =====
+ E0..FF -> E0 -> E0 -> E0 F0..FF -> F0 -> F0
+ C0..DF -> C0 -> C0 -> C0 E0..EF -> F0 -> F0
+ A0..BF -> A0 -> A0 -> A0 D8..DF -> 00 -> 00
+ 80..9F -> 80 -> 80 -> 80 D0..D7 -> 00 -> 00
+ 60..7F -> 60 -> 60 -> 60
+ 40..5F -> 40 -> pc -> pc 40..5F -> pc
+ 20..3F -> 20 -> 20 -> 20
+ 00..1F -> 00 -> 00 -> 00
+ ====== ===== ===== ===== ===== ====== ===== =====
+
+The default location of IO peripherals is above 0xf0000000. This may be changed
+using a "ranges" property in a device tree simple-bus node. See the Devicetree
+Specification, section 4.5 for details on the syntax and semantics of
+simple-bus nodes. The following limitations apply:
+
+1. Only top level simple-bus nodes are considered
+
+2. Only one (first) simple-bus node is considered
+
+3. Empty "ranges" properties are not supported
+
+4. Only the first triplet in the "ranges" property is considered
+
+5. The parent-bus-address value is rounded down to the nearest 256MB boundary
+
+6. The IO area covers the entire 256MB segment of parent-bus-address; the
+ "ranges" triplet length field is ignored
+
+
+MMUv3 address space layouts.
+============================
+
+Default MMUv2-compatible layout::
+
+ Symbol VADDR Size
+ +------------------+
+ | Userspace | 0x00000000 TASK_SIZE
+ +------------------+ 0x40000000
+ +------------------+
+ | Page table | XCHAL_PAGE_TABLE_VADDR 0x80000000 XCHAL_PAGE_TABLE_SIZE
+ +------------------+
+ | KASAN shadow map | KASAN_SHADOW_START 0x80400000 KASAN_SHADOW_SIZE
+ +------------------+ 0x8e400000
+ +------------------+
+ | VMALLOC area | VMALLOC_START 0xc0000000 128MB - 64KB
+ +------------------+ VMALLOC_END
+ | Cache aliasing | TLBTEMP_BASE_1 0xc7ff0000 DCACHE_WAY_SIZE
+ | remap area 1 |
+ +------------------+
+ | Cache aliasing | TLBTEMP_BASE_2 DCACHE_WAY_SIZE
+ | remap area 2 |
+ +------------------+
+ +------------------+
+ | KMAP area | PKMAP_BASE PTRS_PER_PTE *
+ | | DCACHE_N_COLORS *
+ | | PAGE_SIZE
+ | | (4MB * DCACHE_N_COLORS)
+ +------------------+
+ | Atomic KMAP area | FIXADDR_START KM_TYPE_NR *
+ | | NR_CPUS *
+ | | DCACHE_N_COLORS *
+ | | PAGE_SIZE
+ +------------------+ FIXADDR_TOP 0xcffff000
+ +------------------+
+ | Cached KSEG | XCHAL_KSEG_CACHED_VADDR 0xd0000000 128MB
+ +------------------+
+ | Uncached KSEG | XCHAL_KSEG_BYPASS_VADDR 0xd8000000 128MB
+ +------------------+
+ | Cached KIO | XCHAL_KIO_CACHED_VADDR 0xe0000000 256MB
+ +------------------+
+ | Uncached KIO | XCHAL_KIO_BYPASS_VADDR 0xf0000000 256MB
+ +------------------+
+
+
+256MB cached + 256MB uncached layout::
+
+ Symbol VADDR Size
+ +------------------+
+ | Userspace | 0x00000000 TASK_SIZE
+ +------------------+ 0x40000000
+ +------------------+
+ | Page table | XCHAL_PAGE_TABLE_VADDR 0x80000000 XCHAL_PAGE_TABLE_SIZE
+ +------------------+
+ | KASAN shadow map | KASAN_SHADOW_START 0x80400000 KASAN_SHADOW_SIZE
+ +------------------+ 0x8e400000
+ +------------------+
+ | VMALLOC area | VMALLOC_START 0xa0000000 128MB - 64KB
+ +------------------+ VMALLOC_END
+ | Cache aliasing | TLBTEMP_BASE_1 0xa7ff0000 DCACHE_WAY_SIZE
+ | remap area 1 |
+ +------------------+
+ | Cache aliasing | TLBTEMP_BASE_2 DCACHE_WAY_SIZE
+ | remap area 2 |
+ +------------------+
+ +------------------+
+ | KMAP area | PKMAP_BASE PTRS_PER_PTE *
+ | | DCACHE_N_COLORS *
+ | | PAGE_SIZE
+ | | (4MB * DCACHE_N_COLORS)
+ +------------------+
+ | Atomic KMAP area | FIXADDR_START KM_TYPE_NR *
+ | | NR_CPUS *
+ | | DCACHE_N_COLORS *
+ | | PAGE_SIZE
+ +------------------+ FIXADDR_TOP 0xaffff000
+ +------------------+
+ | Cached KSEG | XCHAL_KSEG_CACHED_VADDR 0xb0000000 256MB
+ +------------------+
+ | Uncached KSEG | XCHAL_KSEG_BYPASS_VADDR 0xc0000000 256MB
+ +------------------+
+ +------------------+
+ | Cached KIO | XCHAL_KIO_CACHED_VADDR 0xe0000000 256MB
+ +------------------+
+ | Uncached KIO | XCHAL_KIO_BYPASS_VADDR 0xf0000000 256MB
+ +------------------+
+
+
+512MB cached + 512MB uncached layout::
+
+ Symbol VADDR Size
+ +------------------+
+ | Userspace | 0x00000000 TASK_SIZE
+ +------------------+ 0x40000000
+ +------------------+
+ | Page table | XCHAL_PAGE_TABLE_VADDR 0x80000000 XCHAL_PAGE_TABLE_SIZE
+ +------------------+
+ | KASAN shadow map | KASAN_SHADOW_START 0x80400000 KASAN_SHADOW_SIZE
+ +------------------+ 0x8e400000
+ +------------------+
+ | VMALLOC area | VMALLOC_START 0x90000000 128MB - 64KB
+ +------------------+ VMALLOC_END
+ | Cache aliasing | TLBTEMP_BASE_1 0x97ff0000 DCACHE_WAY_SIZE
+ | remap area 1 |
+ +------------------+
+ | Cache aliasing | TLBTEMP_BASE_2 DCACHE_WAY_SIZE
+ | remap area 2 |
+ +------------------+
+ +------------------+
+ | KMAP area | PKMAP_BASE PTRS_PER_PTE *
+ | | DCACHE_N_COLORS *
+ | | PAGE_SIZE
+ | | (4MB * DCACHE_N_COLORS)
+ +------------------+
+ | Atomic KMAP area | FIXADDR_START KM_TYPE_NR *
+ | | NR_CPUS *
+ | | DCACHE_N_COLORS *
+ | | PAGE_SIZE
+ +------------------+ FIXADDR_TOP 0x9ffff000
+ +------------------+
+ | Cached KSEG | XCHAL_KSEG_CACHED_VADDR 0xa0000000 512MB
+ +------------------+
+ | Uncached KSEG | XCHAL_KSEG_BYPASS_VADDR 0xc0000000 512MB
+ +------------------+
+ | Cached KIO | XCHAL_KIO_CACHED_VADDR 0xe0000000 256MB
+ +------------------+
+ | Uncached KIO | XCHAL_KIO_BYPASS_VADDR 0xf0000000 256MB
+ +------------------+
diff --git a/Documentation/xtensa/mmu.txt b/Documentation/xtensa/mmu.txt
deleted file mode 100644
index 318114de63f3..000000000000
--- a/Documentation/xtensa/mmu.txt
+++ /dev/null
@@ -1,189 +0,0 @@
-MMUv3 initialization sequence.
-
-The code in the initialize_mmu macro sets up MMUv3 memory mapping
-identically to MMUv2 fixed memory mapping. Depending on
-CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX symbol this code is
-located in addresses it was linked for (symbol undefined), or not
-(symbol defined), so it needs to be position-independent.
-
-The code has the following assumptions:
- This code fragment is run only on an MMU v3.
- TLBs are in their reset state.
- ITLBCFG and DTLBCFG are zero (reset state).
- RASID is 0x04030201 (reset state).
- PS.RING is zero (reset state).
- LITBASE is zero (reset state, PC-relative literals); required to be PIC.
-
-TLB setup proceeds along the following steps.
-
- Legend:
- VA = virtual address (two upper nibbles of it);
- PA = physical address (two upper nibbles of it);
- pc = physical range that contains this code;
-
-After step 2, we jump to virtual address in the range 0x40000000..0x5fffffff
-or 0x00000000..0x1fffffff, depending on whether the kernel was loaded below
-0x40000000 or above. That address corresponds to next instruction to execute
-in this code. After step 4, we jump to intended (linked) address of this code.
-The scheme below assumes that the kernel is loaded below 0x40000000.
-
- Step0 Step1 Step2 Step3 Step4 Step5
- ===== ===== ===== ===== ===== =====
- VA PA PA PA PA VA PA PA
- ------ -- -- -- -- ------ -- --
- E0..FF -> E0 -> E0 -> E0 F0..FF -> F0 -> F0
- C0..DF -> C0 -> C0 -> C0 E0..EF -> F0 -> F0
- A0..BF -> A0 -> A0 -> A0 D8..DF -> 00 -> 00
- 80..9F -> 80 -> 80 -> 80 D0..D7 -> 00 -> 00
- 60..7F -> 60 -> 60 -> 60
- 40..5F -> 40 -> pc -> pc 40..5F -> pc
- 20..3F -> 20 -> 20 -> 20
- 00..1F -> 00 -> 00 -> 00
-
-The default location of IO peripherals is above 0xf0000000. This may be changed
-using a "ranges" property in a device tree simple-bus node. See the Devicetree
-Specification, section 4.5 for details on the syntax and semantics of
-simple-bus nodes. The following limitations apply:
-
-1. Only top level simple-bus nodes are considered
-
-2. Only one (first) simple-bus node is considered
-
-3. Empty "ranges" properties are not supported
-
-4. Only the first triplet in the "ranges" property is considered
-
-5. The parent-bus-address value is rounded down to the nearest 256MB boundary
-
-6. The IO area covers the entire 256MB segment of parent-bus-address; the
- "ranges" triplet length field is ignored
-
-
-MMUv3 address space layouts.
-============================
-
-Default MMUv2-compatible layout.
-
- Symbol VADDR Size
-+------------------+
-| Userspace | 0x00000000 TASK_SIZE
-+------------------+ 0x40000000
-+------------------+
-| Page table | XCHAL_PAGE_TABLE_VADDR 0x80000000 XCHAL_PAGE_TABLE_SIZE
-+------------------+
-| KASAN shadow map | KASAN_SHADOW_START 0x80400000 KASAN_SHADOW_SIZE
-+------------------+ 0x8e400000
-+------------------+
-| VMALLOC area | VMALLOC_START 0xc0000000 128MB - 64KB
-+------------------+ VMALLOC_END
-| Cache aliasing | TLBTEMP_BASE_1 0xc7ff0000 DCACHE_WAY_SIZE
-| remap area 1 |
-+------------------+
-| Cache aliasing | TLBTEMP_BASE_2 DCACHE_WAY_SIZE
-| remap area 2 |
-+------------------+
-+------------------+
-| KMAP area | PKMAP_BASE PTRS_PER_PTE *
-| | DCACHE_N_COLORS *
-| | PAGE_SIZE
-| | (4MB * DCACHE_N_COLORS)
-+------------------+
-| Atomic KMAP area | FIXADDR_START KM_TYPE_NR *
-| | NR_CPUS *
-| | DCACHE_N_COLORS *
-| | PAGE_SIZE
-+------------------+ FIXADDR_TOP 0xcffff000
-+------------------+
-| Cached KSEG | XCHAL_KSEG_CACHED_VADDR 0xd0000000 128MB
-+------------------+
-| Uncached KSEG | XCHAL_KSEG_BYPASS_VADDR 0xd8000000 128MB
-+------------------+
-| Cached KIO | XCHAL_KIO_CACHED_VADDR 0xe0000000 256MB
-+------------------+
-| Uncached KIO | XCHAL_KIO_BYPASS_VADDR 0xf0000000 256MB
-+------------------+
-
-
-256MB cached + 256MB uncached layout.
-
- Symbol VADDR Size
-+------------------+
-| Userspace | 0x00000000 TASK_SIZE
-+------------------+ 0x40000000
-+------------------+
-| Page table | XCHAL_PAGE_TABLE_VADDR 0x80000000 XCHAL_PAGE_TABLE_SIZE
-+------------------+
-| KASAN shadow map | KASAN_SHADOW_START 0x80400000 KASAN_SHADOW_SIZE
-+------------------+ 0x8e400000
-+------------------+
-| VMALLOC area | VMALLOC_START 0xa0000000 128MB - 64KB
-+------------------+ VMALLOC_END
-| Cache aliasing | TLBTEMP_BASE_1 0xa7ff0000 DCACHE_WAY_SIZE
-| remap area 1 |
-+------------------+
-| Cache aliasing | TLBTEMP_BASE_2 DCACHE_WAY_SIZE
-| remap area 2 |
-+------------------+
-+------------------+
-| KMAP area | PKMAP_BASE PTRS_PER_PTE *
-| | DCACHE_N_COLORS *
-| | PAGE_SIZE
-| | (4MB * DCACHE_N_COLORS)
-+------------------+
-| Atomic KMAP area | FIXADDR_START KM_TYPE_NR *
-| | NR_CPUS *
-| | DCACHE_N_COLORS *
-| | PAGE_SIZE
-+------------------+ FIXADDR_TOP 0xaffff000
-+------------------+
-| Cached KSEG | XCHAL_KSEG_CACHED_VADDR 0xb0000000 256MB
-+------------------+
-| Uncached KSEG | XCHAL_KSEG_BYPASS_VADDR 0xc0000000 256MB
-+------------------+
-+------------------+
-| Cached KIO | XCHAL_KIO_CACHED_VADDR 0xe0000000 256MB
-+------------------+
-| Uncached KIO | XCHAL_KIO_BYPASS_VADDR 0xf0000000 256MB
-+------------------+
-
-
-512MB cached + 512MB uncached layout.
-
- Symbol VADDR Size
-+------------------+
-| Userspace | 0x00000000 TASK_SIZE
-+------------------+ 0x40000000
-+------------------+
-| Page table | XCHAL_PAGE_TABLE_VADDR 0x80000000 XCHAL_PAGE_TABLE_SIZE
-+------------------+
-| KASAN shadow map | KASAN_SHADOW_START 0x80400000 KASAN_SHADOW_SIZE
-+------------------+ 0x8e400000
-+------------------+
-| VMALLOC area | VMALLOC_START 0x90000000 128MB - 64KB
-+------------------+ VMALLOC_END
-| Cache aliasing | TLBTEMP_BASE_1 0x97ff0000 DCACHE_WAY_SIZE
-| remap area 1 |
-+------------------+
-| Cache aliasing | TLBTEMP_BASE_2 DCACHE_WAY_SIZE
-| remap area 2 |
-+------------------+
-+------------------+
-| KMAP area | PKMAP_BASE PTRS_PER_PTE *
-| | DCACHE_N_COLORS *
-| | PAGE_SIZE
-| | (4MB * DCACHE_N_COLORS)
-+------------------+
-| Atomic KMAP area | FIXADDR_START KM_TYPE_NR *
-| | NR_CPUS *
-| | DCACHE_N_COLORS *
-| | PAGE_SIZE
-+------------------+ FIXADDR_TOP 0x9ffff000
-+------------------+
-| Cached KSEG | XCHAL_KSEG_CACHED_VADDR 0xa0000000 512MB
-+------------------+
-| Uncached KSEG | XCHAL_KSEG_BYPASS_VADDR 0xc0000000 512MB
-+------------------+
-| Cached KIO | XCHAL_KIO_CACHED_VADDR 0xe0000000 256MB
-+------------------+
-| Uncached KIO | XCHAL_KIO_BYPASS_VADDR 0xf0000000 256MB
-+------------------+
diff --git a/arch/xtensa/include/asm/initialize_mmu.h b/arch/xtensa/include/asm/initialize_mmu.h
index 323d05789159..3b054d2bede0 100644
--- a/arch/xtensa/include/asm/initialize_mmu.h
+++ b/arch/xtensa/include/asm/initialize_mmu.h
@@ -42,7 +42,7 @@
#if XCHAL_HAVE_S32C1I && (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RC_2009_0)
/*
* We Have Atomic Operation Control (ATOMCTL) Register; Initialize it.
- * For details see Documentation/xtensa/atomctl.txt
+ * For details see Documentation/xtensa/atomctl.rst
*/
#if XCHAL_DCACHE_IS_COHERENT
movi a3, 0x25 /* For SMP/MX -- internal for writeback,
--
2.21.0
next prev parent reply other threads:[~2019-06-12 18:40 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-12 18:38 [PATCH v1 00/31] Convert files to ReST - part 2 Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 01/31] docs: connector: convert to ReST and rename to connector.rst Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 02/31] docs: lcd-panel-cgram.txt: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 03/31] docs: lp855x-driver.txt: convert to ReST and move to kernel-api Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 04/31] docs: m68k: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 05/31] docs: cma/debugfs.txt: " Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 06/31] docs: console.txt: " Mauro Carvalho Chehab
2019-06-12 18:38 ` Mauro Carvalho Chehab
2019-06-12 18:38 ` Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 07/31] docs: pti_intel_mid.txt: convert it to pti_intel_mid.rst Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 08/31] docs: early-userspace: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 09/31] docs: driver-model: " Mauro Carvalho Chehab
2019-06-12 18:38 ` [Intel-wired-lan] " Mauro Carvalho Chehab
2019-06-12 18:38 ` Mauro Carvalho Chehab
2019-06-12 20:21 ` Jeff Kirsher
2019-06-12 20:21 ` [Intel-wired-lan] " Jeff Kirsher
2019-06-12 18:38 ` [PATCH v1 10/31] docs: arm: " Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 11/31] docs: memory-devices: convert ti-emif.txt to ReST Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 12/31] docs: xen-tpmfront.txt: convert it to .rst Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 13/31] docs: bus-devices: ti-gpmc.rst: convert it to ReST Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 14/31] docs: nvmem: convert docs to ReST and rename to *.rst Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 15/31] docs: phy: convert samsung-usb2.txt to ReST format Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 16/31] docs: rbtree.txt: fix Sphinx build warnings Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 17/31] docs: DMA-API-HOWTO.txt: fix an unmarked code block Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 18/31] docs: accounting: convert to ReST Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 19/31] docs: fmc: " Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 20/31] docs: hid: " Mauro Carvalho Chehab
2019-06-13 8:08 ` Benjamin Tissoires
2019-06-13 9:52 ` Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 21/31] docs: ia64: " Mauro Carvalho Chehab
2019-06-12 18:38 ` Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 22/31] docs: leds: " Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 23/31] docs: laptops: " Mauro Carvalho Chehab
2019-06-12 20:19 ` Andy Shevchenko
2019-06-12 18:38 ` [PATCH v1 24/31] docs: iio: " Mauro Carvalho Chehab
2019-06-16 13:47 ` Jonathan Cameron
2019-06-12 18:38 ` [PATCH v1 25/31] docs: namespaces: " Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 26/31] docs: nfc: " Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 27/31] docs: md: " Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 28/31] docs: mtd: " Mauro Carvalho Chehab
2019-06-12 18:38 ` Mauro Carvalho Chehab
2019-06-12 18:38 ` [PATCH v1 29/31] docs: nvdimm: " Mauro Carvalho Chehab
2019-06-12 18:38 ` Mauro Carvalho Chehab
2019-06-12 19:04 ` Dan Williams
2019-06-12 19:04 ` Dan Williams
2019-06-12 20:41 ` Mauro Carvalho Chehab
2019-06-12 20:41 ` Mauro Carvalho Chehab
2019-06-12 18:38 ` Mauro Carvalho Chehab [this message]
2019-06-12 18:38 ` [PATCH v1 31/31] docs: mmc: " Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cd2fa8ed3001db6dc9634e54a5a40f1d965bc427.1560364494.git.mchehab+samsung@kernel.org \
--to=mchehab+samsung@kernel.org \
--cc=chris@zankel.net \
--cc=corbet@lwn.net \
--cc=jcmvbkbc@gmail.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-xtensa@linux-xtensa.org \
--cc=mchehab@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.