cip-dev.lists.cip-project.org archive mirror
 help / color / mirror / Atom feed
* [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1
@ 2020-06-04  3:18 Chen-Yu Tsai (Moxa)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 01/15] PM / OPP: Add debugfs support Chen-Yu Tsai (Moxa)
                   ` (15 more replies)
  0 siblings, 16 replies; 18+ messages in thread
From: Chen-Yu Tsai (Moxa) @ 2020-06-04  3:18 UTC (permalink / raw)
  To: nobuhiro1.iwamatsu, pavel; +Cc: Chen-Yu Tsai (Moxa), cip-dev, JohnsonCH.Chen

[-- Attachment #1: Type: text/plain, Size: 3628 bytes --]

Hi everyone,

This is part 1 of MOXA's PM / OPP / cpufreq backport series. The whole
series aims to backport patches related to PM / OPPv2 and cpufreq
which were included in the v4.4 kernel from TI's SDK. The end goal is
to include cpufreq-ti and convert am33xx to using it and OPPv2.

Part 1 here includes patches from the v4.5 cycle, listed in topological
order:

    deaa51465105 PM / OPP: Add debugfs support
    1c4d12de2719 PM / OPP: Add "opp-supported-hw" binding
    ffdb8cc7a27c PM / OPP: Add {opp-microvolt|opp-microamp}-<name> binding
    af87a39a5f7c PM / OPP: Remove 'operating-points-names' binding
    754dcf35f346 PM / OPP: Rename OPP nodes as opp@<opp-hz>
    dc4e7b1fa20a PM / OPP: Add missing doc comments
    7de36b0aa51a PM / OPP: Parse 'opp-supported-hw' binding
    01fb4d3c39d3 PM / OPP: Parse 'opp-<prop>-<name>' bindings
    fd8d8e63467c PM / OPP: Fix parsing of opp-microvolt and opp-microamp properties
    d9de19b1cc01 PM / OPP: Set cpu_dev->id in cpumask first
    5ff24d601092 PM / OPP: Use snprintf() instead of sprintf()
    3be3f8f36e73 devicetree: bindings: Add optional dynamic-power-coefficient property
    f8fa8ae06b8c cpufreq-dt: Supply power coefficient when registering cooling devices
    929ca89c305a cpufreq-dt: fix handling regulator_get_voltage() result
    b331bc20d928 cpufreq: cpufreq-dt: avoid uninitialized variable warnings:

Of these,

    dc4e7b1fa20a PM / OPP: Add missing doc comments

was identified as a patch dependency, but otherwise serves no purpose. And

    d9de19b1cc01 PM / OPP: Set cpu_dev->id in cpumask first

was found while looking through git logs. Last,

    3be3f8f36e73 devicetree: bindings: Add optional dynamic-power-coefficient property

is related to

    f8fa8ae06b8c cpufreq-dt: Supply power coefficient when registering cooling devices

All other patches were included from TI's SDK.

The patches apply cleanly on top of linux-4.4.y-cip. Please have a look.


Regards
ChenYu


Andrzej Hajda (1):
  cpufreq-dt: fix handling regulator_get_voltage() result

Arnd Bergmann (1):
  cpufreq: cpufreq-dt: avoid uninitialized variable warnings:

Bartlomiej Zolnierkiewicz (1):
  PM / OPP: Fix parsing of opp-microvolt and opp-microamp properties

Pi-Cheng Chen (1):
  PM / OPP: Set cpu_dev->id in cpumask first

Punit Agrawal (2):
  devicetree: bindings: Add optional dynamic-power-coefficient property
  cpufreq-dt: Supply power coefficient when registering cooling devices

Viresh Kumar (9):
  PM / OPP: Add debugfs support
  PM / OPP: Add "opp-supported-hw" binding
  PM / OPP: Add {opp-microvolt|opp-microamp}-<name> binding
  PM / OPP: Remove 'operating-points-names' binding
  PM / OPP: Rename OPP nodes as opp@<opp-hz>
  PM / OPP: Add missing doc comments
  PM / OPP: Parse 'opp-supported-hw' binding
  PM / OPP: Parse 'opp-<prop>-<name>' bindings
  PM / OPP: Use snprintf() instead of sprintf()

 .../devicetree/bindings/arm/cpus.txt          |  17 +
 Documentation/devicetree/bindings/opp/opp.txt | 132 +++++--
 drivers/base/power/opp/Makefile               |   1 +
 drivers/base/power/opp/core.c                 | 336 +++++++++++++++++-
 drivers/base/power/opp/cpu.c                  |   3 +-
 drivers/base/power/opp/debugfs.c              | 219 ++++++++++++
 drivers/base/power/opp/opp.h                  |  53 ++-
 drivers/cpufreq/cpufreq-dt.c                  |  29 +-
 include/linux/pm_opp.h                        |  22 ++
 9 files changed, 742 insertions(+), 70 deletions(-)
 create mode 100644 drivers/base/power/opp/debugfs.c

-- 
2.27.0.rc0


[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4711): https://lists.cip-project.org/g/cip-dev/message/4711
Mute This Topic: https://lists.cip-project.org/mt/74665338/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply	[flat|nested] 18+ messages in thread

* [cip-dev] [4.4.y-cip 01/15] PM / OPP: Add debugfs support
  2020-06-04  3:18 [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
@ 2020-06-04  3:18 ` Chen-Yu Tsai (Moxa)
  2020-06-04  4:47   ` Viresh Kumar
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 02/15] PM / OPP: Add "opp-supported-hw" binding Chen-Yu Tsai (Moxa)
                   ` (14 subsequent siblings)
  15 siblings, 1 reply; 18+ messages in thread
From: Chen-Yu Tsai (Moxa) @ 2020-06-04  3:18 UTC (permalink / raw)
  To: nobuhiro1.iwamatsu, pavel
  Cc: Viresh Kumar, cip-dev, JohnsonCH.Chen, Stephen Boyd,
	Rafael J . Wysocki, Chen-Yu Tsai

[-- Attachment #1: Type: text/plain, Size: 14287 bytes --]

From: Viresh Kumar <viresh.kumar@linaro.org>

commit deaa51465105a7eda19a627b10372f4f7c51a4df upstream.

This patch adds debugfs support to OPP layer to export OPPs and their
properties for all the devices.

This creates a top level directory: /sys/kernel/debug/opp and then
device specific directories (based on device names) inside it. For
example: 'cpu0', 'cpu1', etc..

If multiple devices share the OPP table, then the real directory is
created only for the first device. For all others, links are created to
the real directory.

Inside the device specific directory, a separate directory is created
for each OPP. And within that files per opp property.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen-Yu Tsai (Moxa) <wens@csie.org>
---
 drivers/base/power/opp/Makefile  |   1 +
 drivers/base/power/opp/core.c    |  21 ++-
 drivers/base/power/opp/debugfs.c | 219 +++++++++++++++++++++++++++++++
 drivers/base/power/opp/opp.h     |  42 ++++++
 4 files changed, 281 insertions(+), 2 deletions(-)
 create mode 100644 drivers/base/power/opp/debugfs.c

diff --git a/drivers/base/power/opp/Makefile b/drivers/base/power/opp/Makefile
index 33c1e18c41a4d..19837ef04d8ef 100644
--- a/drivers/base/power/opp/Makefile
+++ b/drivers/base/power/opp/Makefile
@@ -1,2 +1,3 @@
 ccflags-$(CONFIG_DEBUG_DRIVER)	:= -DDEBUG
 obj-y				+= core.o cpu.o
+obj-$(CONFIG_DEBUG_FS)		+= debugfs.o
diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index e822dc706d676..22d91d9b1b037 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -463,6 +463,7 @@ static void _kfree_list_dev_rcu(struct rcu_head *head)
 static void _remove_list_dev(struct device_list_opp *list_dev,
 			     struct device_opp *dev_opp)
 {
+	opp_debug_unregister(list_dev, dev_opp);
 	list_del(&list_dev->node);
 	call_srcu(&dev_opp->srcu_head.srcu, &list_dev->rcu_head,
 		  _kfree_list_dev_rcu);
@@ -472,6 +473,7 @@ struct device_list_opp *_add_list_dev(const struct device *dev,
 				      struct device_opp *dev_opp)
 {
 	struct device_list_opp *list_dev;
+	int ret;
 
 	list_dev = kzalloc(sizeof(*list_dev), GFP_KERNEL);
 	if (!list_dev)
@@ -481,6 +483,12 @@ struct device_list_opp *_add_list_dev(const struct device *dev,
 	list_dev->dev = dev;
 	list_add_rcu(&list_dev->node, &dev_opp->dev_list);
 
+	/* Create debugfs entries for the dev_opp */
+	ret = opp_debug_register(list_dev, dev_opp);
+	if (ret)
+		dev_err(dev, "%s: Failed to register opp debugfs (%d)\n",
+			__func__, ret);
+
 	return list_dev;
 }
 
@@ -596,6 +604,7 @@ static void _opp_remove(struct device_opp *dev_opp,
 	 */
 	if (notify)
 		srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_REMOVE, opp);
+	opp_debug_remove_one(opp);
 	list_del_rcu(&opp->node);
 	call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu);
 
@@ -673,6 +682,7 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
 {
 	struct dev_pm_opp *opp;
 	struct list_head *head = &dev_opp->opp_list;
+	int ret;
 
 	/*
 	 * Insert new OPP in order of increasing frequency and discard if
@@ -703,6 +713,11 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
 	new_opp->dev_opp = dev_opp;
 	list_add_rcu(&new_opp->node, head);
 
+	ret = opp_debug_create_one(new_opp, dev_opp);
+	if (ret)
+		dev_err(dev, "%s: Failed to register opp to debugfs (%d)\n",
+			__func__, ret);
+
 	return 0;
 }
 
@@ -895,12 +910,14 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np)
 
 	/* OPP to select on device suspend */
 	if (of_property_read_bool(np, "opp-suspend")) {
-		if (dev_opp->suspend_opp)
+		if (dev_opp->suspend_opp) {
 			dev_warn(dev, "%s: Multiple suspend OPPs found (%lu %lu)\n",
 				 __func__, dev_opp->suspend_opp->rate,
 				 new_opp->rate);
-		else
+		} else {
+			new_opp->suspend = true;
 			dev_opp->suspend_opp = new_opp;
+		}
 	}
 
 	if (new_opp->clock_latency_ns > dev_opp->clock_latency_ns_max)
diff --git a/drivers/base/power/opp/debugfs.c b/drivers/base/power/opp/debugfs.c
new file mode 100644
index 0000000000000..ddfe4773e922a
--- /dev/null
+++ b/drivers/base/power/opp/debugfs.c
@@ -0,0 +1,219 @@
+/*
+ * Generic OPP debugfs interface
+ *
+ * Copyright (C) 2015-2016 Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/limits.h>
+
+#include "opp.h"
+
+static struct dentry *rootdir;
+
+static void opp_set_dev_name(const struct device *dev, char *name)
+{
+	if (dev->parent)
+		snprintf(name, NAME_MAX, "%s-%s", dev_name(dev->parent),
+			 dev_name(dev));
+	else
+		snprintf(name, NAME_MAX, "%s", dev_name(dev));
+}
+
+void opp_debug_remove_one(struct dev_pm_opp *opp)
+{
+	debugfs_remove_recursive(opp->dentry);
+}
+
+int opp_debug_create_one(struct dev_pm_opp *opp, struct device_opp *dev_opp)
+{
+	struct dentry *pdentry = dev_opp->dentry;
+	struct dentry *d;
+	char name[25];	/* 20 chars for 64 bit value + 5 (opp:\0) */
+
+	/* Rate is unique to each OPP, use it to give opp-name */
+	snprintf(name, sizeof(name), "opp:%lu", opp->rate);
+
+	/* Create per-opp directory */
+	d = debugfs_create_dir(name, pdentry);
+	if (!d)
+		return -ENOMEM;
+
+	if (!debugfs_create_bool("available", S_IRUGO, d, &opp->available))
+		return -ENOMEM;
+
+	if (!debugfs_create_bool("dynamic", S_IRUGO, d, &opp->dynamic))
+		return -ENOMEM;
+
+	if (!debugfs_create_bool("turbo", S_IRUGO, d, &opp->turbo))
+		return -ENOMEM;
+
+	if (!debugfs_create_bool("suspend", S_IRUGO, d, &opp->suspend))
+		return -ENOMEM;
+
+	if (!debugfs_create_ulong("rate_hz", S_IRUGO, d, &opp->rate))
+		return -ENOMEM;
+
+	if (!debugfs_create_ulong("u_volt_target", S_IRUGO, d, &opp->u_volt))
+		return -ENOMEM;
+
+	if (!debugfs_create_ulong("u_volt_min", S_IRUGO, d, &opp->u_volt_min))
+		return -ENOMEM;
+
+	if (!debugfs_create_ulong("u_volt_max", S_IRUGO, d, &opp->u_volt_max))
+		return -ENOMEM;
+
+	if (!debugfs_create_ulong("u_amp", S_IRUGO, d, &opp->u_amp))
+		return -ENOMEM;
+
+	if (!debugfs_create_ulong("clock_latency_ns", S_IRUGO, d,
+				  &opp->clock_latency_ns))
+		return -ENOMEM;
+
+	opp->dentry = d;
+	return 0;
+}
+
+static int device_opp_debug_create_dir(struct device_list_opp *list_dev,
+				       struct device_opp *dev_opp)
+{
+	const struct device *dev = list_dev->dev;
+	struct dentry *d;
+
+	opp_set_dev_name(dev, dev_opp->dentry_name);
+
+	/* Create device specific directory */
+	d = debugfs_create_dir(dev_opp->dentry_name, rootdir);
+	if (!d) {
+		dev_err(dev, "%s: Failed to create debugfs dir\n", __func__);
+		return -ENOMEM;
+	}
+
+	list_dev->dentry = d;
+	dev_opp->dentry = d;
+
+	return 0;
+}
+
+static int device_opp_debug_create_link(struct device_list_opp *list_dev,
+					struct device_opp *dev_opp)
+{
+	const struct device *dev = list_dev->dev;
+	char name[NAME_MAX];
+	struct dentry *d;
+
+	opp_set_dev_name(list_dev->dev, name);
+
+	/* Create device specific directory link */
+	d = debugfs_create_symlink(name, rootdir, dev_opp->dentry_name);
+	if (!d) {
+		dev_err(dev, "%s: Failed to create link\n", __func__);
+		return -ENOMEM;
+	}
+
+	list_dev->dentry = d;
+
+	return 0;
+}
+
+/**
+ * opp_debug_register - add a device opp node to the debugfs 'opp' directory
+ * @list_dev: list-dev pointer for device
+ * @dev_opp: the device-opp being added
+ *
+ * Dynamically adds device specific directory in debugfs 'opp' directory. If the
+ * device-opp is shared with other devices, then links will be created for all
+ * devices except the first.
+ *
+ * Return: 0 on success, otherwise negative error.
+ */
+int opp_debug_register(struct device_list_opp *list_dev,
+		       struct device_opp *dev_opp)
+{
+	if (!rootdir) {
+		pr_debug("%s: Uninitialized rootdir\n", __func__);
+		return -EINVAL;
+	}
+
+	if (dev_opp->dentry)
+		return device_opp_debug_create_link(list_dev, dev_opp);
+
+	return device_opp_debug_create_dir(list_dev, dev_opp);
+}
+
+static void opp_migrate_dentry(struct device_list_opp *list_dev,
+			       struct device_opp *dev_opp)
+{
+	struct device_list_opp *new_dev;
+	const struct device *dev;
+	struct dentry *dentry;
+
+	/* Look for next list-dev */
+	list_for_each_entry(new_dev, &dev_opp->dev_list, node)
+		if (new_dev != list_dev)
+			break;
+
+	/* new_dev is guaranteed to be valid here */
+	dev = new_dev->dev;
+	debugfs_remove_recursive(new_dev->dentry);
+
+	opp_set_dev_name(dev, dev_opp->dentry_name);
+
+	dentry = debugfs_rename(rootdir, list_dev->dentry, rootdir,
+				dev_opp->dentry_name);
+	if (!dentry) {
+		dev_err(dev, "%s: Failed to rename link from: %s to %s\n",
+			__func__, dev_name(list_dev->dev), dev_name(dev));
+		return;
+	}
+
+	new_dev->dentry = dentry;
+	dev_opp->dentry = dentry;
+}
+
+/**
+ * opp_debug_unregister - remove a device opp node from debugfs opp directory
+ * @list_dev: list-dev pointer for device
+ * @dev_opp: the device-opp being removed
+ *
+ * Dynamically removes device specific directory from debugfs 'opp' directory.
+ */
+void opp_debug_unregister(struct device_list_opp *list_dev,
+			  struct device_opp *dev_opp)
+{
+	if (list_dev->dentry == dev_opp->dentry) {
+		/* Move the real dentry object under another device */
+		if (!list_is_singular(&dev_opp->dev_list)) {
+			opp_migrate_dentry(list_dev, dev_opp);
+			goto out;
+		}
+		dev_opp->dentry = NULL;
+	}
+
+	debugfs_remove_recursive(list_dev->dentry);
+
+out:
+	list_dev->dentry = NULL;
+}
+
+static int __init opp_debug_init(void)
+{
+	/* Create /sys/kernel/debug/opp directory */
+	rootdir = debugfs_create_dir("opp", NULL);
+	if (!rootdir) {
+		pr_err("%s: Failed to create root directory\n", __func__);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+core_initcall(opp_debug_init);
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
index 7366b2aa89978..a6bd8d2c2b47f 100644
--- a/drivers/base/power/opp/opp.h
+++ b/drivers/base/power/opp/opp.h
@@ -17,6 +17,7 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
+#include <linux/limits.h>
 #include <linux/pm_opp.h>
 #include <linux/rculist.h>
 #include <linux/rcupdate.h>
@@ -53,6 +54,7 @@ extern struct mutex dev_opp_list_lock;
  * @dynamic:	not-created from static DT entries.
  * @available:	true/false - marks if this OPP as available or not
  * @turbo:	true if turbo (boost) OPP
+ * @suspend:	true if suspend OPP
  * @rate:	Frequency in hertz
  * @u_volt:	Target voltage in microvolts corresponding to this OPP
  * @u_volt_min:	Minimum voltage in microvolts corresponding to this OPP
@@ -63,6 +65,7 @@ extern struct mutex dev_opp_list_lock;
  * @dev_opp:	points back to the device_opp struct this opp belongs to
  * @rcu_head:	RCU callback head used for deferred freeing
  * @np:		OPP's device node.
+ * @dentry:	debugfs dentry pointer (per opp)
  *
  * This structure stores the OPP information for a given device.
  */
@@ -72,6 +75,7 @@ struct dev_pm_opp {
 	bool available;
 	bool dynamic;
 	bool turbo;
+	bool suspend;
 	unsigned long rate;
 
 	unsigned long u_volt;
@@ -84,6 +88,10 @@ struct dev_pm_opp {
 	struct rcu_head rcu_head;
 
 	struct device_node *np;
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *dentry;
+#endif
 };
 
 /**
@@ -91,6 +99,7 @@ struct dev_pm_opp {
  * @node:	list node
  * @dev:	device to which the struct object belongs
  * @rcu_head:	RCU callback head used for deferred freeing
+ * @dentry:	debugfs dentry pointer (per device)
  *
  * This is an internal data structure maintaining the list of devices that are
  * managed by 'struct device_opp'.
@@ -99,6 +108,10 @@ struct device_list_opp {
 	struct list_head node;
 	const struct device *dev;
 	struct rcu_head rcu_head;
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *dentry;
+#endif
 };
 
 /**
@@ -114,6 +127,8 @@ struct device_list_opp {
  * @opp_list:	list of opps
  * @np:		struct device_node pointer for opp's DT node.
  * @shared_opp: OPP is shared between multiple devices.
+ * @dentry:	debugfs dentry pointer of the real device directory (not links).
+ * @dentry_name: Name of the real dentry.
  *
  * This is an internal data structure maintaining the link to opps attached to
  * a device. This structure is not meant to be shared to users as it is
@@ -135,6 +150,11 @@ struct device_opp {
 	unsigned long clock_latency_ns_max;
 	bool shared_opp;
 	struct dev_pm_opp *suspend_opp;
+
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *dentry;
+	char dentry_name[NAME_MAX];
+#endif
 };
 
 /* Routines internal to opp core */
@@ -143,4 +163,26 @@ struct device_list_opp *_add_list_dev(const struct device *dev,
 				      struct device_opp *dev_opp);
 struct device_node *_of_get_opp_desc_node(struct device *dev);
 
+#ifdef CONFIG_DEBUG_FS
+void opp_debug_remove_one(struct dev_pm_opp *opp);
+int opp_debug_create_one(struct dev_pm_opp *opp, struct device_opp *dev_opp);
+int opp_debug_register(struct device_list_opp *list_dev,
+		       struct device_opp *dev_opp);
+void opp_debug_unregister(struct device_list_opp *list_dev,
+			  struct device_opp *dev_opp);
+#else
+static inline void opp_debug_remove_one(struct dev_pm_opp *opp) {}
+
+static inline int opp_debug_create_one(struct dev_pm_opp *opp,
+				       struct device_opp *dev_opp)
+{ return 0; }
+static inline int opp_debug_register(struct device_list_opp *list_dev,
+				     struct device_opp *dev_opp)
+{ return 0; }
+
+static inline void opp_debug_unregister(struct device_list_opp *list_dev,
+					struct device_opp *dev_opp)
+{ }
+#endif		/* DEBUG_FS */
+
 #endif		/* __DRIVER_OPP_H__ */
-- 
2.27.0.rc0


[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4716): https://lists.cip-project.org/g/cip-dev/message/4716
Mute This Topic: https://lists.cip-project.org/mt/74669312/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [cip-dev] [4.4.y-cip 02/15] PM / OPP: Add "opp-supported-hw" binding
  2020-06-04  3:18 [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 01/15] PM / OPP: Add debugfs support Chen-Yu Tsai (Moxa)
@ 2020-06-04  3:18 ` Chen-Yu Tsai (Moxa)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 03/15] PM / OPP: Add {opp-microvolt|opp-microamp}-<name> binding Chen-Yu Tsai (Moxa)
                   ` (13 subsequent siblings)
  15 siblings, 0 replies; 18+ messages in thread
From: Chen-Yu Tsai (Moxa) @ 2020-06-04  3:18 UTC (permalink / raw)
  To: nobuhiro1.iwamatsu, pavel
  Cc: Viresh Kumar, cip-dev, JohnsonCH.Chen, Stephen Boyd, Rob Herring,
	Rafael J . Wysocki, Chen-Yu Tsai

[-- Attachment #1: Type: text/plain, Size: 3843 bytes --]

From: Viresh Kumar <viresh.kumar@linaro.org>

commit 1c4d12de2719dfdf27c6dab31e7a5641ee293c94 upstream.

We may want to enable only a subset of OPPs, from the bigger list of
OPPs, based on what version of the hardware we are running on. This
would enable us to not duplicate OPP tables for every version of the
hardware we support.

To enable that, this patch defines a new property 'opp-supported-hw'. It
can support any number of hierarchy levels of the versions the hardware
follows. And based on the selected hardware versions, we can pick only
the relevant OPPs at runtime.

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen-Yu Tsai (Moxa) <wens@csie.org>
---
 Documentation/devicetree/bindings/opp/opp.txt | 65 +++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 0cb44dc21f97c..d072fa0ffbd44 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -123,6 +123,26 @@ Optional properties:
 - opp-suspend: Marks the OPP to be used during device suspend. Only one OPP in
   the table should have this.
 
+- opp-supported-hw: This enables us to select only a subset of OPPs from the
+  larger OPP table, based on what version of the hardware we are running on. We
+  still can't have multiple nodes with the same opp-hz value in OPP table.
+
+  It's an user defined array containing a hierarchy of hardware version numbers,
+  supported by the OPP. For example: a platform with hierarchy of three levels
+  of versions (A, B and C), this field should be like <X Y Z>, where X
+  corresponds to Version hierarchy A, Y corresponds to version hierarchy B and Z
+  corresponds to version hierarchy C.
+
+  Each level of hierarchy is represented by a 32 bit value, and so there can be
+  only 32 different supported version per hierarchy. i.e. 1 bit per version. A
+  value of 0xFFFFFFFF will enable the OPP for all versions for that hierarchy
+  level. And a value of 0x00000000 will disable the OPP completely, and so we
+  never want that to happen.
+
+  If 32 values aren't sufficient for a version hierarchy, than that version
+  hierarchy can be contained in multiple 32 bit values. i.e. <X Y Z1 Z2> in the
+  above example, Z1 & Z2 refer to the version hierarchy Z.
+
 - status: Marks the node enabled/disabled.
 
 Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
@@ -463,3 +483,48 @@ Example 5: Multiple OPP tables
 		};
 	};
 };
+
+Example 6: opp-supported-hw
+(example: three level hierarchy of versions: cuts, substrate and process)
+
+/ {
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			...
+
+			cpu-supply = <&cpu_supply>
+			operating-points-v2 = <&cpu0_opp_table_slow>;
+		};
+	};
+
+	opp_table {
+		compatible = "operating-points-v2";
+		status = "okay";
+		opp-shared;
+
+		opp00 {
+			/*
+			 * Supports all substrate and process versions for 0xF
+			 * cuts, i.e. only first four cuts.
+			 */
+			opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <900000 915000 925000>;
+			...
+		};
+
+		opp01 {
+			/*
+			 * Supports:
+			 * - cuts: only one, 6th cut (represented by 6th bit).
+			 * - substrate: supports 16 different substrate versions
+			 * - process: supports 9 different process versions
+			 */
+			opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <900000 915000 925000>;
+			...
+		};
+	};
+};
-- 
2.27.0.rc0


[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4710): https://lists.cip-project.org/g/cip-dev/message/4710
Mute This Topic: https://lists.cip-project.org/mt/74669307/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [cip-dev] [4.4.y-cip 03/15] PM / OPP: Add {opp-microvolt|opp-microamp}-<name> binding
  2020-06-04  3:18 [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 01/15] PM / OPP: Add debugfs support Chen-Yu Tsai (Moxa)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 02/15] PM / OPP: Add "opp-supported-hw" binding Chen-Yu Tsai (Moxa)
@ 2020-06-04  3:18 ` Chen-Yu Tsai (Moxa)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 04/15] PM / OPP: Remove 'operating-points-names' binding Chen-Yu Tsai (Moxa)
                   ` (12 subsequent siblings)
  15 siblings, 0 replies; 18+ messages in thread
From: Chen-Yu Tsai (Moxa) @ 2020-06-04  3:18 UTC (permalink / raw)
  To: nobuhiro1.iwamatsu, pavel
  Cc: Viresh Kumar, cip-dev, JohnsonCH.Chen, Stephen Boyd,
	Rafael J . Wysocki, Chen-Yu Tsai

[-- Attachment #1: Type: text/plain, Size: 4018 bytes --]

From: Viresh Kumar <viresh.kumar@linaro.org>

commit ffdb8cc7a27c89175e541e68e2a73f1f63ab8c6b upstream.

Depending on the version of hardware or its properties, which are only
known at runtime, various properties of the OPP can change. For example,
an OPP with frequency 1.2 GHz, may have different voltage/current
requirements based on the version of the hardware it is running on.

In order to not replicate the same OPP tables for varying values of all
such fields, this commit introduces the concept of opp-property-<name>.
The <name> can be chosen by the platform at runtime, and OPPs will be
initialized depending on that name string. Currently support is extended
for the following properties:
- opp-microvolt-<name>
- opp-microamp-<name>

If the name string isn't provided by the platform, or if it is provided
but doesn't match the properties present in the OPP node, we will fall
back to the original properties without the -<name> string, if they are
available.

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen-Yu Tsai (Moxa) <wens@csie.org>
---
 Documentation/devicetree/bindings/opp/opp.txt | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index d072fa0ffbd44..a3e7f0d5e1fb4 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -100,6 +100,14 @@ Optional properties:
   Entries for multiple regulators must be present in the same order as
   regulators are specified in device's DT node.
 
+- opp-microvolt-<name>: Named opp-microvolt property. This is exactly similar to
+  the above opp-microvolt property, but allows multiple voltage ranges to be
+  provided for the same OPP. At runtime, the platform can pick a <name> and
+  matching opp-microvolt-<name> property will be enabled for all OPPs. If the
+  platform doesn't pick a specific <name> or the <name> doesn't match with any
+  opp-microvolt-<name> properties, then opp-microvolt property shall be used, if
+  present.
+
 - opp-microamp: The maximum current drawn by the device in microamperes
   considering system specific parameters (such as transients, process, aging,
   maximum operating temperature range etc.) as necessary. This may be used to
@@ -112,6 +120,9 @@ Optional properties:
   for few regulators, then this should be marked as zero for them. If it isn't
   required for any regulator, then this property need not be present.
 
+- opp-microamp-<name>: Named opp-microamp property. Similar to
+  opp-microvolt-<name> property, but for microamp instead.
+
 - clock-latency-ns: Specifies the maximum possible transition latency (in
   nanoseconds) for switching to this OPP from any other OPP.
 
@@ -528,3 +539,39 @@ Example 6: opp-supported-hw
 		};
 	};
 };
+
+Example 7: opp-microvolt-<name>, opp-microamp-<name>:
+(example: device with two possible microvolt ranges: slow and fast)
+
+/ {
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			...
+
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp00 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt-slow = <900000 915000 925000>;
+			opp-microvolt-fast = <970000 975000 985000>;
+			opp-microamp-slow =  <70000>;
+			opp-microamp-fast =  <71000>;
+		};
+
+		opp01 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt-slow = <900000 915000 925000>, /* Supply vcc0 */
+					      <910000 925000 935000>; /* Supply vcc1 */
+			opp-microvolt-fast = <970000 975000 985000>, /* Supply vcc0 */
+					     <960000 965000 975000>; /* Supply vcc1 */
+			opp-microamp =  <70000>; /* Will be used for both slow/fast */
+		};
+	};
+};
-- 
2.27.0.rc0


[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4715): https://lists.cip-project.org/g/cip-dev/message/4715
Mute This Topic: https://lists.cip-project.org/mt/74669311/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [cip-dev] [4.4.y-cip 04/15] PM / OPP: Remove 'operating-points-names' binding
  2020-06-04  3:18 [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
                   ` (2 preceding siblings ...)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 03/15] PM / OPP: Add {opp-microvolt|opp-microamp}-<name> binding Chen-Yu Tsai (Moxa)
@ 2020-06-04  3:18 ` Chen-Yu Tsai (Moxa)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 05/15] PM / OPP: Rename OPP nodes as opp@<opp-hz> Chen-Yu Tsai (Moxa)
                   ` (11 subsequent siblings)
  15 siblings, 0 replies; 18+ messages in thread
From: Chen-Yu Tsai (Moxa) @ 2020-06-04  3:18 UTC (permalink / raw)
  To: nobuhiro1.iwamatsu, pavel
  Cc: Viresh Kumar, cip-dev, JohnsonCH.Chen, Stephen Boyd, Rob Herring,
	Rafael J . Wysocki, Chen-Yu Tsai

[-- Attachment #1: Type: text/plain, Size: 3388 bytes --]

From: Viresh Kumar <viresh.kumar@linaro.org>

commit af87a39a5f7cf6ef252b1aec3e2e6508a40e51f1 upstream.

These aren't used until now by any DT files and wouldn't be used now as
we have a better scheme in place now, i.e. opp-property-<name>
properties.

Remove the (useless) binding without breaking ABI.

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen-Yu Tsai (Moxa) <wens@csie.org>
---
 Documentation/devicetree/bindings/opp/opp.txt | 62 +------------------
 1 file changed, 2 insertions(+), 60 deletions(-)

diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index a3e7f0d5e1fb4..24eac9a977494 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -45,21 +45,10 @@ Devices supporting OPPs must set their "operating-points-v2" property with
 phandle to a OPP table in their DT node. The OPP core will use this phandle to
 find the operating points for the device.
 
-Devices may want to choose OPP tables at runtime and so can provide a list of
-phandles here. But only *one* of them should be chosen at runtime. This must be
-accompanied by a corresponding "operating-points-names" property, to uniquely
-identify the OPP tables.
-
 If required, this can be extended for SoC vendor specfic bindings. Such bindings
 should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt
 and should have a compatible description like: "operating-points-v2-<vendor>".
 
-Optional properties:
-- operating-points-names: Names of OPP tables (required if multiple OPP
-  tables are present), to uniquely identify them. The same list must be present
-  for all the CPUs which are sharing clock/voltage rails and hence the OPP
-  tables.
-
 * OPP Table Node
 
 This describes the OPPs belonging to a device. This node can have following
@@ -448,54 +437,7 @@ Example 4: Handling multiple regulators
 	};
 };
 
-Example 5: Multiple OPP tables
-
-/ {
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a7";
-			...
-
-			cpu-supply = <&cpu_supply>
-			operating-points-v2 = <&cpu0_opp_table_slow>, <&cpu0_opp_table_fast>;
-			operating-points-names = "slow", "fast";
-		};
-	};
-
-	cpu0_opp_table_slow: opp_table_slow {
-		compatible = "operating-points-v2";
-		status = "okay";
-		opp-shared;
-
-		opp00 {
-			opp-hz = /bits/ 64 <600000000>;
-			...
-		};
-
-		opp01 {
-			opp-hz = /bits/ 64 <800000000>;
-			...
-		};
-	};
-
-	cpu0_opp_table_fast: opp_table_fast {
-		compatible = "operating-points-v2";
-		status = "okay";
-		opp-shared;
-
-		opp10 {
-			opp-hz = /bits/ 64 <1000000000>;
-			...
-		};
-
-		opp11 {
-			opp-hz = /bits/ 64 <1100000000>;
-			...
-		};
-	};
-};
-
-Example 6: opp-supported-hw
+Example 5: opp-supported-hw
 (example: three level hierarchy of versions: cuts, substrate and process)
 
 / {
@@ -540,7 +482,7 @@ Example 6: opp-supported-hw
 	};
 };
 
-Example 7: opp-microvolt-<name>, opp-microamp-<name>:
+Example 6: opp-microvolt-<name>, opp-microamp-<name>:
 (example: device with two possible microvolt ranges: slow and fast)
 
 / {
-- 
2.27.0.rc0


[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4703): https://lists.cip-project.org/g/cip-dev/message/4703
Mute This Topic: https://lists.cip-project.org/mt/74669298/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [cip-dev] [4.4.y-cip 05/15] PM / OPP: Rename OPP nodes as opp@<opp-hz>
  2020-06-04  3:18 [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
                   ` (3 preceding siblings ...)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 04/15] PM / OPP: Remove 'operating-points-names' binding Chen-Yu Tsai (Moxa)
@ 2020-06-04  3:18 ` Chen-Yu Tsai (Moxa)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 06/15] PM / OPP: Add missing doc comments Chen-Yu Tsai (Moxa)
                   ` (10 subsequent siblings)
  15 siblings, 0 replies; 18+ messages in thread
From: Chen-Yu Tsai (Moxa) @ 2020-06-04  3:18 UTC (permalink / raw)
  To: nobuhiro1.iwamatsu, pavel
  Cc: Viresh Kumar, cip-dev, JohnsonCH.Chen, Stephen Boyd, Rob Herring,
	Rafael J . Wysocki, Chen-Yu Tsai

[-- Attachment #1: Type: text/plain, Size: 5529 bytes --]

From: Viresh Kumar <viresh.kumar@linaro.org>

commit 754dcf35f34698661801ae1d391efa02affe83a7 upstream.

It would be better to name OPP nodes as opp@<opp-hz> as that will ensure
that multiple DT nodes don't contain the same frequency. Of course we
expect the writer to name the node with its opp-hz frequency and not any
other frequency.

And that will let the compile error out if multiple nodes are using the
same opp-hz frequency.

Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen-Yu Tsai (Moxa) <wens@csie.org>
---
 Documentation/devicetree/bindings/opp/opp.txt | 38 +++++++++----------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
index 24eac9a977494..601256fe8c0dd 100644
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ b/Documentation/devicetree/bindings/opp/opp.txt
@@ -177,20 +177,20 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp00 {
+		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000 975000 985000>;
 			opp-microamp = <70000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
-		opp01 {
+		opp@1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
 			opp-microvolt = <980000 1000000 1010000>;
 			opp-microamp = <80000>;
 			clock-latency-ns = <310000>;
 		};
-		opp02 {
+		opp@1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1025000>;
 			clock-latency-ns = <290000>;
@@ -256,20 +256,20 @@ independently.
 		 * independently.
 		 */
 
-		opp00 {
+		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000 975000 985000>;
 			opp-microamp = <70000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
-		opp01 {
+		opp@1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
 			opp-microvolt = <980000 1000000 1010000>;
 			opp-microamp = <80000>;
 			clock-latency-ns = <310000>;
 		};
-		opp02 {
+		opp@1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1025000>;
 			opp-microamp = <90000;
@@ -332,20 +332,20 @@ DVFS state together.
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp00 {
+		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000 975000 985000>;
 			opp-microamp = <70000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
-		opp01 {
+		opp@1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
 			opp-microvolt = <980000 1000000 1010000>;
 			opp-microamp = <80000>;
 			clock-latency-ns = <310000>;
 		};
-		opp02 {
+		opp@1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1025000>;
 			opp-microamp = <90000>;
@@ -358,20 +358,20 @@ DVFS state together.
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp10 {
+		opp@1300000000 {
 			opp-hz = /bits/ 64 <1300000000>;
 			opp-microvolt = <1045000 1050000 1055000>;
 			opp-microamp = <95000>;
 			clock-latency-ns = <400000>;
 			opp-suspend;
 		};
-		opp11 {
+		opp@1400000000 {
 			opp-hz = /bits/ 64 <1400000000>;
 			opp-microvolt = <1075000>;
 			opp-microamp = <100000>;
 			clock-latency-ns = <400000>;
 		};
-		opp12 {
+		opp@1500000000 {
 			opp-hz = /bits/ 64 <1500000000>;
 			opp-microvolt = <1010000 1100000 1110000>;
 			opp-microamp = <95000>;
@@ -398,7 +398,7 @@ Example 4: Handling multiple regulators
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp00 {
+		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000>, /* Supply 0 */
 					<960000>, /* Supply 1 */
@@ -411,7 +411,7 @@ Example 4: Handling multiple regulators
 
 		/* OR */
 
-		opp00 {
+		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000 975000 985000>, /* Supply 0 */
 					<960000 965000 975000>, /* Supply 1 */
@@ -424,7 +424,7 @@ Example 4: Handling multiple regulators
 
 		/* OR */
 
-		opp00 {
+		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000 975000 985000>, /* Supply 0 */
 					<960000 965000 975000>, /* Supply 1 */
@@ -456,7 +456,7 @@ Example 5: opp-supported-hw
 		status = "okay";
 		opp-shared;
 
-		opp00 {
+		opp@600000000 {
 			/*
 			 * Supports all substrate and process versions for 0xF
 			 * cuts, i.e. only first four cuts.
@@ -467,7 +467,7 @@ Example 5: opp-supported-hw
 			...
 		};
 
-		opp01 {
+		opp@800000000 {
 			/*
 			 * Supports:
 			 * - cuts: only one, 6th cut (represented by 6th bit).
@@ -499,7 +499,7 @@ Example 6: opp-microvolt-<name>, opp-microamp-<name>:
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp00 {
+		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt-slow = <900000 915000 925000>;
 			opp-microvolt-fast = <970000 975000 985000>;
@@ -507,7 +507,7 @@ Example 6: opp-microvolt-<name>, opp-microamp-<name>:
 			opp-microamp-fast =  <71000>;
 		};
 
-		opp01 {
+		opp@1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt-slow = <900000 915000 925000>, /* Supply vcc0 */
 					      <910000 925000 935000>; /* Supply vcc1 */
-- 
2.27.0.rc0


[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4704): https://lists.cip-project.org/g/cip-dev/message/4704
Mute This Topic: https://lists.cip-project.org/mt/74669302/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [cip-dev] [4.4.y-cip 06/15] PM / OPP: Add missing doc comments
  2020-06-04  3:18 [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
                   ` (4 preceding siblings ...)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 05/15] PM / OPP: Rename OPP nodes as opp@<opp-hz> Chen-Yu Tsai (Moxa)
@ 2020-06-04  3:18 ` Chen-Yu Tsai (Moxa)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 07/15] PM / OPP: Parse 'opp-supported-hw' binding Chen-Yu Tsai (Moxa)
                   ` (9 subsequent siblings)
  15 siblings, 0 replies; 18+ messages in thread
From: Chen-Yu Tsai (Moxa) @ 2020-06-04  3:18 UTC (permalink / raw)
  To: nobuhiro1.iwamatsu, pavel
  Cc: Viresh Kumar, cip-dev, JohnsonCH.Chen, Pavel Machek,
	Stephen Boyd, Rafael J . Wysocki, Chen-Yu Tsai

[-- Attachment #1: Type: text/plain, Size: 1763 bytes --]

From: Viresh Kumar <viresh.kumar@linaro.org>

commit dc4e7b1fa20a840d2317fcfdaa1064fc09d2afcb upstream.

Few doc-style comments were missing, add them. Rearrange another one to
match the sequence within the structure.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen-Yu Tsai (Moxa) <wens@csie.org>
---
 drivers/base/power/opp/opp.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
index a6bd8d2c2b47f..b8880c7f8be1c 100644
--- a/drivers/base/power/opp/opp.h
+++ b/drivers/base/power/opp/opp.h
@@ -51,8 +51,8 @@ extern struct mutex dev_opp_list_lock;
  *		are protected by the dev_opp_list_lock for integrity.
  *		IMPORTANT: the opp nodes should be maintained in increasing
  *		order.
- * @dynamic:	not-created from static DT entries.
  * @available:	true/false - marks if this OPP as available or not
+ * @dynamic:	not-created from static DT entries.
  * @turbo:	true if turbo (boost) OPP
  * @suspend:	true if suspend OPP
  * @rate:	Frequency in hertz
@@ -126,7 +126,9 @@ struct device_list_opp {
  * @dev_list:	list of devices that share these OPPs
  * @opp_list:	list of opps
  * @np:		struct device_node pointer for opp's DT node.
+ * @clock_latency_ns_max: Max clock latency in nanoseconds.
  * @shared_opp: OPP is shared between multiple devices.
+ * @suspend_opp: Pointer to OPP to be used during device suspend.
  * @dentry:	debugfs dentry pointer of the real device directory (not links).
  * @dentry_name: Name of the real dentry.
  *
-- 
2.27.0.rc0


[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4706): https://lists.cip-project.org/g/cip-dev/message/4706
Mute This Topic: https://lists.cip-project.org/mt/74669304/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [cip-dev] [4.4.y-cip 07/15] PM / OPP: Parse 'opp-supported-hw' binding
  2020-06-04  3:18 [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
                   ` (5 preceding siblings ...)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 06/15] PM / OPP: Add missing doc comments Chen-Yu Tsai (Moxa)
@ 2020-06-04  3:18 ` Chen-Yu Tsai (Moxa)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 08/15] PM / OPP: Parse 'opp-<prop>-<name>' bindings Chen-Yu Tsai (Moxa)
                   ` (8 subsequent siblings)
  15 siblings, 0 replies; 18+ messages in thread
From: Chen-Yu Tsai (Moxa) @ 2020-06-04  3:18 UTC (permalink / raw)
  To: nobuhiro1.iwamatsu, pavel
  Cc: Viresh Kumar, cip-dev, JohnsonCH.Chen, Lee Jones,
	Rafael J . Wysocki, Chen-Yu Tsai

[-- Attachment #1: Type: text/plain, Size: 8242 bytes --]

From: Viresh Kumar <viresh.kumar@linaro.org>

commit 7de36b0aa51a5a59e28fb2da768fa3ab07de0674 upstream.

OPP bindings allow a platform to enable OPPs based on the version of the
hardware they are used for.

Add support to the OPP-core to parse these bindings, by introducing
dev_pm_opp_{set|put}_supported_hw() APIs.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen-Yu Tsai (Moxa) <wens@csie.org>
---
 drivers/base/power/opp/core.c | 148 ++++++++++++++++++++++++++++++++++
 drivers/base/power/opp/opp.h  |   5 ++
 include/linux/pm_opp.h        |  13 +++
 3 files changed, 166 insertions(+)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 22d91d9b1b037..a73433c3cbe45 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -559,6 +559,9 @@ static void _remove_device_opp(struct device_opp *dev_opp)
 	if (!list_empty(&dev_opp->opp_list))
 		return;
 
+	if (dev_opp->supported_hw)
+		return;
+
 	list_dev = list_first_entry(&dev_opp->dev_list, struct device_list_opp,
 				    node);
 
@@ -839,6 +842,145 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev)
 	return 0;
 }
 
+/**
+ * dev_pm_opp_set_supported_hw() - Set supported platforms
+ * @dev: Device for which supported-hw has to be set.
+ * @versions: Array of hierarchy of versions to match.
+ * @count: Number of elements in the array.
+ *
+ * This is required only for the V2 bindings, and it enables a platform to
+ * specify the hierarchy of versions it supports. OPP layer will then enable
+ * OPPs, which are available for those versions, based on its 'opp-supported-hw'
+ * property.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int dev_pm_opp_set_supported_hw(struct device *dev, const u32 *versions,
+				unsigned int count)
+{
+	struct device_opp *dev_opp;
+	int ret = 0;
+
+	/* Hold our list modification lock here */
+	mutex_lock(&dev_opp_list_lock);
+
+	dev_opp = _add_device_opp(dev);
+	if (!dev_opp) {
+		ret = -ENOMEM;
+		goto unlock;
+	}
+
+	/* Make sure there are no concurrent readers while updating dev_opp */
+	WARN_ON(!list_empty(&dev_opp->opp_list));
+
+	/* Do we already have a version hierarchy associated with dev_opp? */
+	if (dev_opp->supported_hw) {
+		dev_err(dev, "%s: Already have supported hardware list\n",
+			__func__);
+		ret = -EBUSY;
+		goto err;
+	}
+
+	dev_opp->supported_hw = kmemdup(versions, count * sizeof(*versions),
+					GFP_KERNEL);
+	if (!dev_opp->supported_hw) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	dev_opp->supported_hw_count = count;
+	mutex_unlock(&dev_opp_list_lock);
+	return 0;
+
+err:
+	_remove_device_opp(dev_opp);
+unlock:
+	mutex_unlock(&dev_opp_list_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_supported_hw);
+
+/**
+ * dev_pm_opp_put_supported_hw() - Releases resources blocked for supported hw
+ * @dev: Device for which supported-hw has to be set.
+ *
+ * This is required only for the V2 bindings, and is called for a matching
+ * dev_pm_opp_set_supported_hw(). Until this is called, the device_opp structure
+ * will not be freed.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void dev_pm_opp_put_supported_hw(struct device *dev)
+{
+	struct device_opp *dev_opp;
+
+	/* Hold our list modification lock here */
+	mutex_lock(&dev_opp_list_lock);
+
+	/* Check for existing list for 'dev' first */
+	dev_opp = _find_device_opp(dev);
+	if (IS_ERR(dev_opp)) {
+		dev_err(dev, "Failed to find dev_opp: %ld\n", PTR_ERR(dev_opp));
+		goto unlock;
+	}
+
+	/* Make sure there are no concurrent readers while updating dev_opp */
+	WARN_ON(!list_empty(&dev_opp->opp_list));
+
+	if (!dev_opp->supported_hw) {
+		dev_err(dev, "%s: Doesn't have supported hardware list\n",
+			__func__);
+		goto unlock;
+	}
+
+	kfree(dev_opp->supported_hw);
+	dev_opp->supported_hw = NULL;
+	dev_opp->supported_hw_count = 0;
+
+	/* Try freeing device_opp if this was the last blocking resource */
+	_remove_device_opp(dev_opp);
+
+unlock:
+	mutex_unlock(&dev_opp_list_lock);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_put_supported_hw);
+
+static bool _opp_is_supported(struct device *dev, struct device_opp *dev_opp,
+			      struct device_node *np)
+{
+	unsigned int count = dev_opp->supported_hw_count;
+	u32 version;
+	int ret;
+
+	if (!dev_opp->supported_hw)
+		return true;
+
+	while (count--) {
+		ret = of_property_read_u32_index(np, "opp-supported-hw", count,
+						 &version);
+		if (ret) {
+			dev_warn(dev, "%s: failed to read opp-supported-hw property at index %d: %d\n",
+				 __func__, count, ret);
+			return false;
+		}
+
+		/* Both of these are bitwise masks of the versions */
+		if (!(version & dev_opp->supported_hw[count]))
+			return false;
+	}
+
+	return true;
+}
+
 /**
  * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings)
  * @dev:	device for which we do this operation
@@ -885,6 +1027,12 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np)
 		goto free_opp;
 	}
 
+	/* Check if the OPP supports hardware's hierarchy of versions or not */
+	if (!_opp_is_supported(dev, dev_opp, np)) {
+		dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate);
+		goto free_opp;
+	}
+
 	/*
 	 * Rate is defined as an unsigned long in clk API, and so casting
 	 * explicitly to its type. Must be fixed once rate is 64 bit
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
index b8880c7f8be1c..70f4564a6ab9d 100644
--- a/drivers/base/power/opp/opp.h
+++ b/drivers/base/power/opp/opp.h
@@ -129,6 +129,8 @@ struct device_list_opp {
  * @clock_latency_ns_max: Max clock latency in nanoseconds.
  * @shared_opp: OPP is shared between multiple devices.
  * @suspend_opp: Pointer to OPP to be used during device suspend.
+ * @supported_hw: Array of version number to support.
+ * @supported_hw_count: Number of elements in supported_hw array.
  * @dentry:	debugfs dentry pointer of the real device directory (not links).
  * @dentry_name: Name of the real dentry.
  *
@@ -153,6 +155,9 @@ struct device_opp {
 	bool shared_opp;
 	struct dev_pm_opp *suspend_opp;
 
+	unsigned int *supported_hw;
+	unsigned int supported_hw_count;
+
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *dentry;
 	char dentry_name[NAME_MAX];
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 9a2e50337af9f..3a85110242f00 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -55,6 +55,9 @@ int dev_pm_opp_enable(struct device *dev, unsigned long freq);
 int dev_pm_opp_disable(struct device *dev, unsigned long freq);
 
 struct srcu_notifier_head *dev_pm_opp_get_notifier(struct device *dev);
+int dev_pm_opp_set_supported_hw(struct device *dev, const u32 *versions,
+				unsigned int count);
+void dev_pm_opp_put_supported_hw(struct device *dev);
 #else
 static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
 {
@@ -129,6 +132,16 @@ static inline struct srcu_notifier_head *dev_pm_opp_get_notifier(
 {
 	return ERR_PTR(-EINVAL);
 }
+
+static inline int dev_pm_opp_set_supported_hw(struct device *dev,
+					      const u32 *versions,
+					      unsigned int count)
+{
+	return -EINVAL;
+}
+
+static inline void dev_pm_opp_put_supported_hw(struct device *dev) {}
+
 #endif		/* CONFIG_PM_OPP */
 
 #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)
-- 
2.27.0.rc0


[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4719): https://lists.cip-project.org/g/cip-dev/message/4719
Mute This Topic: https://lists.cip-project.org/mt/74669315/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [cip-dev] [4.4.y-cip 08/15] PM / OPP: Parse 'opp-<prop>-<name>' bindings
  2020-06-04  3:18 [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
                   ` (6 preceding siblings ...)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 07/15] PM / OPP: Parse 'opp-supported-hw' binding Chen-Yu Tsai (Moxa)
@ 2020-06-04  3:18 ` Chen-Yu Tsai (Moxa)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 09/15] PM / OPP: Fix parsing of opp-microvolt and opp-microamp properties Chen-Yu Tsai (Moxa)
                   ` (7 subsequent siblings)
  15 siblings, 0 replies; 18+ messages in thread
From: Chen-Yu Tsai (Moxa) @ 2020-06-04  3:18 UTC (permalink / raw)
  To: nobuhiro1.iwamatsu, pavel
  Cc: Viresh Kumar, cip-dev, JohnsonCH.Chen, Lee Jones,
	Rafael J . Wysocki, Chen-Yu Tsai

[-- Attachment #1: Type: text/plain, Size: 9819 bytes --]

From: Viresh Kumar <viresh.kumar@linaro.org>

commit 01fb4d3c39d35b725441e8a9a26b3f3ad67793ed upstream.

OPP bindings (for few properties) allow a platform to choose a
value/range among a set of available options. The options are present as
opp-<prop>-<name>, where the platform needs to supply the <name> string.

The OPP properties which allow such an option are: opp-microvolt and
opp-microamp.

Add support to the OPP-core to parse these bindings, by introducing
dev_pm_opp_{set|put}_prop_name() APIs.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen-Yu Tsai (Moxa) <wens@csie.org>
---
 drivers/base/power/opp/core.c | 165 ++++++++++++++++++++++++++++++----
 drivers/base/power/opp/opp.h  |   2 +
 include/linux/pm_opp.h        |   9 ++
 3 files changed, 161 insertions(+), 15 deletions(-)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index a73433c3cbe45..408fee4cb72df 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -562,6 +562,9 @@ static void _remove_device_opp(struct device_opp *dev_opp)
 	if (dev_opp->supported_hw)
 		return;
 
+	if (dev_opp->prop_name)
+		return;
+
 	list_dev = list_first_entry(&dev_opp->dev_list, struct device_list_opp,
 				    node);
 
@@ -794,35 +797,48 @@ unlock:
 }
 
 /* TODO: Support multiple regulators */
-static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev)
+static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
+			      struct device_opp *dev_opp)
 {
 	u32 microvolt[3] = {0};
 	u32 val;
 	int count, ret;
+	struct property *prop = NULL;
+	char name[NAME_MAX];
+
+	/* Search for "opp-microvolt-<name>" */
+	if (dev_opp->prop_name) {
+		sprintf(name, "opp-microvolt-%s", dev_opp->prop_name);
+		prop = of_find_property(opp->np, name, NULL);
+	}
+
+	if (!prop) {
+		/* Search for "opp-microvolt" */
+		name[13] = '\0';
+		prop = of_find_property(opp->np, name, NULL);
 
-	/* Missing property isn't a problem, but an invalid entry is */
-	if (!of_find_property(opp->np, "opp-microvolt", NULL))
-		return 0;
+		/* Missing property isn't a problem, but an invalid entry is */
+		if (!prop)
+			return 0;
+	}
 
-	count = of_property_count_u32_elems(opp->np, "opp-microvolt");
+	count = of_property_count_u32_elems(opp->np, name);
 	if (count < 0) {
-		dev_err(dev, "%s: Invalid opp-microvolt property (%d)\n",
-			__func__, count);
+		dev_err(dev, "%s: Invalid %s property (%d)\n",
+			__func__, name, count);
 		return count;
 	}
 
 	/* There can be one or three elements here */
 	if (count != 1 && count != 3) {
-		dev_err(dev, "%s: Invalid number of elements in opp-microvolt property (%d)\n",
-			__func__, count);
+		dev_err(dev, "%s: Invalid number of elements in %s property (%d)\n",
+			__func__, name, count);
 		return -EINVAL;
 	}
 
-	ret = of_property_read_u32_array(opp->np, "opp-microvolt", microvolt,
-					 count);
+	ret = of_property_read_u32_array(opp->np, name, microvolt, count);
 	if (ret) {
-		dev_err(dev, "%s: error parsing opp-microvolt: %d\n", __func__,
-			ret);
+		dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret);
 		return -EINVAL;
 	}
 
@@ -836,7 +852,20 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev)
 		opp->u_volt_max = microvolt[2];
 	}
 
-	if (!of_property_read_u32(opp->np, "opp-microamp", &val))
+	/* Search for "opp-microamp-<name>" */
+	prop = NULL;
+	if (dev_opp->prop_name) {
+		sprintf(name, "opp-microamp-%s", dev_opp->prop_name);
+		prop = of_find_property(opp->np, name, NULL);
+	}
+
+	if (!prop) {
+		/* Search for "opp-microamp" */
+		name[12] = '\0';
+		prop = of_find_property(opp->np, name, NULL);
+	}
+
+	if (prop && !of_property_read_u32(opp->np, name, &val))
 		opp->u_amp = val;
 
 	return 0;
@@ -954,6 +983,112 @@ unlock:
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_put_supported_hw);
 
+/**
+ * dev_pm_opp_set_prop_name() - Set prop-extn name
+ * @dev: Device for which the regulator has to be set.
+ * @name: name to postfix to properties.
+ *
+ * This is required only for the V2 bindings, and it enables a platform to
+ * specify the extn to be used for certain property names. The properties to
+ * which the extension will apply are opp-microvolt and opp-microamp. OPP core
+ * should postfix the property name with -<name> while looking for them.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int dev_pm_opp_set_prop_name(struct device *dev, const char *name)
+{
+	struct device_opp *dev_opp;
+	int ret = 0;
+
+	/* Hold our list modification lock here */
+	mutex_lock(&dev_opp_list_lock);
+
+	dev_opp = _add_device_opp(dev);
+	if (!dev_opp) {
+		ret = -ENOMEM;
+		goto unlock;
+	}
+
+	/* Make sure there are no concurrent readers while updating dev_opp */
+	WARN_ON(!list_empty(&dev_opp->opp_list));
+
+	/* Do we already have a prop-name associated with dev_opp? */
+	if (dev_opp->prop_name) {
+		dev_err(dev, "%s: Already have prop-name %s\n", __func__,
+			dev_opp->prop_name);
+		ret = -EBUSY;
+		goto err;
+	}
+
+	dev_opp->prop_name = kstrdup(name, GFP_KERNEL);
+	if (!dev_opp->prop_name) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	mutex_unlock(&dev_opp_list_lock);
+	return 0;
+
+err:
+	_remove_device_opp(dev_opp);
+unlock:
+	mutex_unlock(&dev_opp_list_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_prop_name);
+
+/**
+ * dev_pm_opp_put_prop_name() - Releases resources blocked for prop-name
+ * @dev: Device for which the regulator has to be set.
+ *
+ * This is required only for the V2 bindings, and is called for a matching
+ * dev_pm_opp_set_prop_name(). Until this is called, the device_opp structure
+ * will not be freed.
+ *
+ * Locking: The internal device_opp and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void dev_pm_opp_put_prop_name(struct device *dev)
+{
+	struct device_opp *dev_opp;
+
+	/* Hold our list modification lock here */
+	mutex_lock(&dev_opp_list_lock);
+
+	/* Check for existing list for 'dev' first */
+	dev_opp = _find_device_opp(dev);
+	if (IS_ERR(dev_opp)) {
+		dev_err(dev, "Failed to find dev_opp: %ld\n", PTR_ERR(dev_opp));
+		goto unlock;
+	}
+
+	/* Make sure there are no concurrent readers while updating dev_opp */
+	WARN_ON(!list_empty(&dev_opp->opp_list));
+
+	if (!dev_opp->prop_name) {
+		dev_err(dev, "%s: Doesn't have a prop-name\n", __func__);
+		goto unlock;
+	}
+
+	kfree(dev_opp->prop_name);
+	dev_opp->prop_name = NULL;
+
+	/* Try freeing device_opp if this was the last blocking resource */
+	_remove_device_opp(dev_opp);
+
+unlock:
+	mutex_unlock(&dev_opp_list_lock);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name);
+
 static bool _opp_is_supported(struct device *dev, struct device_opp *dev_opp,
 			      struct device_node *np)
 {
@@ -1048,7 +1183,7 @@ static int _opp_add_static_v2(struct device *dev, struct device_node *np)
 	if (!of_property_read_u32(np, "clock-latency-ns", &val))
 		new_opp->clock_latency_ns = val;
 
-	ret = opp_parse_supplies(new_opp, dev);
+	ret = opp_parse_supplies(new_opp, dev, dev_opp);
 	if (ret)
 		goto free_opp;
 
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
index 70f4564a6ab9d..690638ef36ee5 100644
--- a/drivers/base/power/opp/opp.h
+++ b/drivers/base/power/opp/opp.h
@@ -131,6 +131,7 @@ struct device_list_opp {
  * @suspend_opp: Pointer to OPP to be used during device suspend.
  * @supported_hw: Array of version number to support.
  * @supported_hw_count: Number of elements in supported_hw array.
+ * @prop_name: A name to postfix to many DT properties, while parsing them.
  * @dentry:	debugfs dentry pointer of the real device directory (not links).
  * @dentry_name: Name of the real dentry.
  *
@@ -157,6 +158,7 @@ struct device_opp {
 
 	unsigned int *supported_hw;
 	unsigned int supported_hw_count;
+	const char *prop_name;
 
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *dentry;
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 3a85110242f00..95403d2ccaf56 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -58,6 +58,8 @@ struct srcu_notifier_head *dev_pm_opp_get_notifier(struct device *dev);
 int dev_pm_opp_set_supported_hw(struct device *dev, const u32 *versions,
 				unsigned int count);
 void dev_pm_opp_put_supported_hw(struct device *dev);
+int dev_pm_opp_set_prop_name(struct device *dev, const char *name);
+void dev_pm_opp_put_prop_name(struct device *dev);
 #else
 static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
 {
@@ -142,6 +144,13 @@ static inline int dev_pm_opp_set_supported_hw(struct device *dev,
 
 static inline void dev_pm_opp_put_supported_hw(struct device *dev) {}
 
+static inline int dev_pm_opp_set_prop_name(struct device *dev, const char *name)
+{
+	return -EINVAL;
+}
+
+static inline void dev_pm_opp_put_prop_name(struct device *dev) {}
+
 #endif		/* CONFIG_PM_OPP */
 
 #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)
-- 
2.27.0.rc0


[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4713): https://lists.cip-project.org/g/cip-dev/message/4713
Mute This Topic: https://lists.cip-project.org/mt/74669309/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [cip-dev] [4.4.y-cip 09/15] PM / OPP: Fix parsing of opp-microvolt and opp-microamp properties
  2020-06-04  3:18 [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
                   ` (7 preceding siblings ...)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 08/15] PM / OPP: Parse 'opp-<prop>-<name>' bindings Chen-Yu Tsai (Moxa)
@ 2020-06-04  3:18 ` Chen-Yu Tsai (Moxa)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 10/15] PM / OPP: Set cpu_dev->id in cpumask first Chen-Yu Tsai (Moxa)
                   ` (6 subsequent siblings)
  15 siblings, 0 replies; 18+ messages in thread
From: Chen-Yu Tsai (Moxa) @ 2020-06-04  3:18 UTC (permalink / raw)
  To: nobuhiro1.iwamatsu, pavel
  Cc: Bartlomiej Zolnierkiewicz, cip-dev, JohnsonCH.Chen, Viresh Kumar,
	Rafael J . Wysocki, Chen-Yu Tsai

[-- Attachment #1: Type: text/plain, Size: 1549 bytes --]

From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

commit fd8d8e63467c922be9ae4452cca2980d473477d9 upstream.

Commit 01fb4d3c39d3 ("PM / OPP: Parse 'opp-<prop>-<name>'
bindings") broke support for parsing standard opp-microvolt and
opp-microamp properties.  Fix it by setting 'name' string to
proper value for !prop cases.

Fixes: 01fb4d3c39d3 ("PM / OPP: Parse 'opp-<prop>-<name> 'bindings")
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen-Yu Tsai (Moxa) <wens@csie.org>
---
 drivers/base/power/opp/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 408fee4cb72df..504a6d4e46723 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -814,7 +814,7 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
 
 	if (!prop) {
 		/* Search for "opp-microvolt" */
-		name[13] = '\0';
+		sprintf(name, "opp-microvolt");
 		prop = of_find_property(opp->np, name, NULL);
 
 		/* Missing property isn't a problem, but an invalid entry is */
@@ -861,7 +861,7 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
 
 	if (!prop) {
 		/* Search for "opp-microamp" */
-		name[12] = '\0';
+		sprintf(name, "opp-microamp");
 		prop = of_find_property(opp->np, name, NULL);
 	}
 
-- 
2.27.0.rc0


[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4705): https://lists.cip-project.org/g/cip-dev/message/4705
Mute This Topic: https://lists.cip-project.org/mt/74669303/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [cip-dev] [4.4.y-cip 10/15] PM / OPP: Set cpu_dev->id in cpumask first
  2020-06-04  3:18 [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
                   ` (8 preceding siblings ...)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 09/15] PM / OPP: Fix parsing of opp-microvolt and opp-microamp properties Chen-Yu Tsai (Moxa)
@ 2020-06-04  3:18 ` Chen-Yu Tsai (Moxa)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 11/15] PM / OPP: Use snprintf() instead of sprintf() Chen-Yu Tsai (Moxa)
                   ` (5 subsequent siblings)
  15 siblings, 0 replies; 18+ messages in thread
From: Chen-Yu Tsai (Moxa) @ 2020-06-04  3:18 UTC (permalink / raw)
  To: nobuhiro1.iwamatsu, pavel
  Cc: Pi-Cheng Chen, cip-dev, JohnsonCH.Chen, Viresh Kumar, Rafael J . Wysocki

[-- Attachment #1: Type: text/plain, Size: 1322 bytes --]

From: Pi-Cheng Chen <pi-cheng.chen@linaro.org>

Set cpu_dev->id in cpumask first when setting up cpumask for CPUs that
share the same OPP table. This might be helpful when handling cpumask
without the original CPU bitfield set.

Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/base/power/opp/cpu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/base/power/opp/cpu.c b/drivers/base/power/opp/cpu.c
index 1a2e8f260b060..a0db8b3575f38 100644
--- a/drivers/base/power/opp/cpu.c
+++ b/drivers/base/power/opp/cpu.c
@@ -218,7 +218,6 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table);
 /*
  * Works only for OPP v2 bindings.
  *
- * cpumask should be already set to mask of cpu_dev->id.
  * Returns -ENOENT if operating-points-v2 bindings aren't supported.
  */
 int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
@@ -234,6 +233,8 @@ int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask
 		return -ENOENT;
 	}
 
+	cpumask_set_cpu(cpu_dev->id, cpumask);
+
 	/* OPPs are shared ? */
 	if (!of_property_read_bool(np, "opp-shared"))
 		goto put_cpu_node;
-- 
2.27.0.rc0


[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4712): https://lists.cip-project.org/g/cip-dev/message/4712
Mute This Topic: https://lists.cip-project.org/mt/74669308/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [cip-dev] [4.4.y-cip 11/15] PM / OPP: Use snprintf() instead of sprintf()
  2020-06-04  3:18 [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
                   ` (9 preceding siblings ...)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 10/15] PM / OPP: Set cpu_dev->id in cpumask first Chen-Yu Tsai (Moxa)
@ 2020-06-04  3:18 ` Chen-Yu Tsai (Moxa)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 12/15] devicetree: bindings: Add optional dynamic-power-coefficient property Chen-Yu Tsai (Moxa)
                   ` (4 subsequent siblings)
  15 siblings, 0 replies; 18+ messages in thread
From: Chen-Yu Tsai (Moxa) @ 2020-06-04  3:18 UTC (permalink / raw)
  To: nobuhiro1.iwamatsu, pavel
  Cc: Viresh Kumar, cip-dev, JohnsonCH.Chen, Geert Uytterhoeven,
	Geert Uytterhoeven, Stephen Boyd, Rafael J . Wysocki,
	Chen-Yu Tsai

[-- Attachment #1: Type: text/plain, Size: 1834 bytes --]

From: Viresh Kumar <viresh.kumar@linaro.org>

commit 5ff24d601092b222340b28466e263b1c4559407e upstream.

sprintf() can access memory outside of the range of the character array,
and is risky in some situations. The driver specified prop_name string
can be longer than NAME_MAX here (only an attacker will do that though)
and so blindly copying it into the character array of size NAME_MAX
isn't safe. Instead we must use snprintf() here.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen-Yu Tsai (Moxa) <wens@csie.org>
---
 drivers/base/power/opp/core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 504a6d4e46723..1e0a2ddf73323 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -808,7 +808,8 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
 
 	/* Search for "opp-microvolt-<name>" */
 	if (dev_opp->prop_name) {
-		sprintf(name, "opp-microvolt-%s", dev_opp->prop_name);
+		snprintf(name, sizeof(name), "opp-microvolt-%s",
+			 dev_opp->prop_name);
 		prop = of_find_property(opp->np, name, NULL);
 	}
 
@@ -855,7 +856,8 @@ static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
 	/* Search for "opp-microamp-<name>" */
 	prop = NULL;
 	if (dev_opp->prop_name) {
-		sprintf(name, "opp-microamp-%s", dev_opp->prop_name);
+		snprintf(name, sizeof(name), "opp-microamp-%s",
+			 dev_opp->prop_name);
 		prop = of_find_property(opp->np, name, NULL);
 	}
 
-- 
2.27.0.rc0


[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4707): https://lists.cip-project.org/g/cip-dev/message/4707
Mute This Topic: https://lists.cip-project.org/mt/74669305/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [cip-dev] [4.4.y-cip 12/15] devicetree: bindings: Add optional dynamic-power-coefficient property
  2020-06-04  3:18 [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
                   ` (10 preceding siblings ...)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 11/15] PM / OPP: Use snprintf() instead of sprintf() Chen-Yu Tsai (Moxa)
@ 2020-06-04  3:18 ` Chen-Yu Tsai (Moxa)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 13/15] cpufreq-dt: Supply power coefficient when registering cooling devices Chen-Yu Tsai (Moxa)
                   ` (3 subsequent siblings)
  15 siblings, 0 replies; 18+ messages in thread
From: Chen-Yu Tsai (Moxa) @ 2020-06-04  3:18 UTC (permalink / raw)
  To: nobuhiro1.iwamatsu, pavel
  Cc: Punit Agrawal, cip-dev, JohnsonCH.Chen, Rob Herring,
	Viresh Kumar, Rafael J . Wysocki, Chen-Yu Tsai

[-- Attachment #1: Type: text/plain, Size: 2037 bytes --]

From: Punit Agrawal <punit.agrawal@arm.com>

commit 3be3f8f36e7349006f19c8c8f0d686e98462a993 upstream.

The dynamic power consumption of a device is proportional to the
square of voltage (V) and the clock frequency (f). It can be expressed as

Pdyn = dynamic-power-coefficient * V^2 * f.

The coefficient represents the running time dynamic power consumption in
units of mw/MHz/uVolt^2 and can be used in the above formula to
calculate the dynamic power in mW.

Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen-Yu Tsai (Moxa) <wens@csie.org>
---
 Documentation/devicetree/bindings/arm/cpus.txt | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 9ef9a2089a5e7..6b1d8ebb94b7b 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -243,6 +243,23 @@ nodes to be present and contain the properties described below.
 		Definition: Specifies the syscon node controlling the cpu core
 			    power domains.
 
+	- dynamic-power-coefficient
+		Usage: optional
+		Value type: <prop-encoded-array>
+		Definition: A u32 value that represents the running time dynamic
+			    power coefficient in units of mW/MHz/uVolt^2. The
+			    coefficient can either be calculated from power
+			    measurements or derived by analysis.
+
+			    The dynamic power consumption of the CPU  is
+			    proportional to the square of the Voltage (V) and
+			    the clock frequency (f). The coefficient is used to
+			    calculate the dynamic power as below -
+
+			    Pdyn = dynamic-power-coefficient * V^2 * f
+
+			    where voltage is in uV, frequency is in MHz.
+
 Example 1 (dual-cluster big.LITTLE system 32-bit):
 
 	cpus {
-- 
2.27.0.rc0


[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4714): https://lists.cip-project.org/g/cip-dev/message/4714
Mute This Topic: https://lists.cip-project.org/mt/74669310/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [cip-dev] [4.4.y-cip 13/15] cpufreq-dt: Supply power coefficient when registering cooling devices
  2020-06-04  3:18 [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
                   ` (11 preceding siblings ...)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 12/15] devicetree: bindings: Add optional dynamic-power-coefficient property Chen-Yu Tsai (Moxa)
@ 2020-06-04  3:18 ` Chen-Yu Tsai (Moxa)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 14/15] cpufreq-dt: fix handling regulator_get_voltage() result Chen-Yu Tsai (Moxa)
                   ` (2 subsequent siblings)
  15 siblings, 0 replies; 18+ messages in thread
From: Chen-Yu Tsai (Moxa) @ 2020-06-04  3:18 UTC (permalink / raw)
  To: nobuhiro1.iwamatsu, pavel
  Cc: Punit Agrawal, cip-dev, JohnsonCH.Chen, Viresh Kumar,
	Javi Merino, Rafael J . Wysocki, Chen-Yu Tsai

[-- Attachment #1: Type: text/plain, Size: 1518 bytes --]

From: Punit Agrawal <punit.agrawal@arm.com>

commit f8fa8ae06b8c2c25d81c99766f9226adc5c3e073 upstream.

Support registering cooling devices with dynamic power coefficient
where provided by the device tree. This allows OF registered cooling
devices driver to be used with the power_allocator thermal governor.

Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen-Yu Tsai (Moxa) <wens@csie.org>
---
 drivers/cpufreq/cpufreq-dt.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 90d64081ddb34..1ceece9d67112 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -407,8 +407,13 @@ static void cpufreq_ready(struct cpufreq_policy *policy)
 	 * thermal DT code takes care of matching them.
 	 */
 	if (of_find_property(np, "#cooling-cells", NULL)) {
-		priv->cdev = of_cpufreq_cooling_register(np,
-							 policy->related_cpus);
+		u32 power_coefficient = 0;
+
+		of_property_read_u32(np, "dynamic-power-coefficient",
+				     &power_coefficient);
+
+		priv->cdev = of_cpufreq_power_cooling_register(np,
+				policy->related_cpus, power_coefficient, NULL);
 		if (IS_ERR(priv->cdev)) {
 			dev_err(priv->cpu_dev,
 				"running cpufreq without cooling device: %ld\n",
-- 
2.27.0.rc0


[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4717): https://lists.cip-project.org/g/cip-dev/message/4717
Mute This Topic: https://lists.cip-project.org/mt/74669313/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [cip-dev] [4.4.y-cip 14/15] cpufreq-dt: fix handling regulator_get_voltage() result
  2020-06-04  3:18 [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
                   ` (12 preceding siblings ...)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 13/15] cpufreq-dt: Supply power coefficient when registering cooling devices Chen-Yu Tsai (Moxa)
@ 2020-06-04  3:18 ` Chen-Yu Tsai (Moxa)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 15/15] cpufreq: cpufreq-dt: avoid uninitialized variable warnings: Chen-Yu Tsai (Moxa)
  2020-06-04  3:45 ` [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
  15 siblings, 0 replies; 18+ messages in thread
From: Chen-Yu Tsai (Moxa) @ 2020-06-04  3:18 UTC (permalink / raw)
  To: nobuhiro1.iwamatsu, pavel
  Cc: Andrzej Hajda, cip-dev, JohnsonCH.Chen, Viresh Kumar,
	Rafael J . Wysocki, Chen-Yu Tsai

[-- Attachment #1: Type: text/plain, Size: 1670 bytes --]

From: Andrzej Hajda <a.hajda@samsung.com>

commit 929ca89c305a6ed7a4149115be99af6d73c36918 upstream.

The function can return negative values so it should be assigned
to signed type.

The problem has been detected using proposed semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci.

Link: http://permalink.gmane.org/gmane.linux.kernel/2038576
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen-Yu Tsai (Moxa) <wens@csie.org>
---
 drivers/cpufreq/cpufreq-dt.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 1ceece9d67112..9bc37c437874a 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -50,7 +50,8 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
 	struct private_data *priv = policy->driver_data;
 	struct device *cpu_dev = priv->cpu_dev;
 	struct regulator *cpu_reg = priv->cpu_reg;
-	unsigned long volt = 0, volt_old = 0, tol = 0;
+	unsigned long volt = 0, tol = 0;
+	int volt_old = 0;
 	unsigned int old_freq, new_freq;
 	long freq_Hz, freq_exact;
 	int ret;
@@ -83,7 +84,7 @@ static int set_target(struct cpufreq_policy *policy, unsigned int index)
 			opp_freq / 1000, volt);
 	}
 
-	dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n",
+	dev_dbg(cpu_dev, "%u MHz, %d mV --> %u MHz, %ld mV\n",
 		old_freq / 1000, (volt_old > 0) ? volt_old / 1000 : -1,
 		new_freq / 1000, volt ? volt / 1000 : -1);
 
-- 
2.27.0.rc0


[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4718): https://lists.cip-project.org/g/cip-dev/message/4718
Mute This Topic: https://lists.cip-project.org/mt/74669314/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* [cip-dev] [4.4.y-cip 15/15] cpufreq: cpufreq-dt: avoid uninitialized variable warnings:
  2020-06-04  3:18 [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
                   ` (13 preceding siblings ...)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 14/15] cpufreq-dt: fix handling regulator_get_voltage() result Chen-Yu Tsai (Moxa)
@ 2020-06-04  3:18 ` Chen-Yu Tsai (Moxa)
  2020-06-04  3:45 ` [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
  15 siblings, 0 replies; 18+ messages in thread
From: Chen-Yu Tsai (Moxa) @ 2020-06-04  3:18 UTC (permalink / raw)
  To: nobuhiro1.iwamatsu, pavel
  Cc: Arnd Bergmann, cip-dev, JohnsonCH.Chen, Viresh Kumar,
	Rafael J . Wysocki, Chen-Yu Tsai

[-- Attachment #1: Type: text/plain, Size: 2750 bytes --]

From: Arnd Bergmann <arnd@arndb.de>

commit b331bc20d9281213f7fb67912638e0fb5baeb324 upstream.

gcc warns quite a bit about values returned from allocate_resources()
in cpufreq-dt.c:

cpufreq-dt.c: In function 'cpufreq_init':
cpufreq-dt.c:327:6: error: 'cpu_dev' may be used uninitialized in this function [-Werror=maybe-uninitialized]
cpufreq-dt.c:197:17: note: 'cpu_dev' was declared here
cpufreq-dt.c:376:2: error: 'cpu_clk' may be used uninitialized in this function [-Werror=maybe-uninitialized]
cpufreq-dt.c:199:14: note: 'cpu_clk' was declared here
cpufreq-dt.c: In function 'dt_cpufreq_probe':
cpufreq-dt.c:461:2: error: 'cpu_clk' may be used uninitialized in this function [-Werror=maybe-uninitialized]
cpufreq-dt.c:447:14: note: 'cpu_clk' was declared here

The problem is that it's slightly hard for gcc to follow return
codes across PTR_ERR() calls.

This patch uses explicit assignments to the "ret" variable to make
it easier for gcc to verify that the code is actually correct,
without the need to add a bogus initialization.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen-Yu Tsai (Moxa) <wens@csie.org>
---
 drivers/cpufreq/cpufreq-dt.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 9bc37c437874a..0ca74d0700583 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -142,15 +142,16 @@ static int allocate_resources(int cpu, struct device **cdev,
 
 try_again:
 	cpu_reg = regulator_get_optional(cpu_dev, reg);
-	if (IS_ERR(cpu_reg)) {
+	ret = PTR_ERR_OR_ZERO(cpu_reg);
+	if (ret) {
 		/*
 		 * If cpu's regulator supply node is present, but regulator is
 		 * not yet registered, we should try defering probe.
 		 */
-		if (PTR_ERR(cpu_reg) == -EPROBE_DEFER) {
+		if (ret == -EPROBE_DEFER) {
 			dev_dbg(cpu_dev, "cpu%d regulator not ready, retry\n",
 				cpu);
-			return -EPROBE_DEFER;
+			return ret;
 		}
 
 		/* Try with "cpu-supply" */
@@ -159,18 +160,16 @@ try_again:
 			goto try_again;
 		}
 
-		dev_dbg(cpu_dev, "no regulator for cpu%d: %ld\n",
-			cpu, PTR_ERR(cpu_reg));
+		dev_dbg(cpu_dev, "no regulator for cpu%d: %d\n", cpu, ret);
 	}
 
 	cpu_clk = clk_get(cpu_dev, NULL);
-	if (IS_ERR(cpu_clk)) {
+	ret = PTR_ERR_OR_ZERO(cpu_clk);
+	if (ret) {
 		/* put regulator */
 		if (!IS_ERR(cpu_reg))
 			regulator_put(cpu_reg);
 
-		ret = PTR_ERR(cpu_clk);
-
 		/*
 		 * If cpu's clk node is present, but clock is not yet
 		 * registered, we should try defering probe.
-- 
2.27.0.rc0


[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4708): https://lists.cip-project.org/g/cip-dev/message/4708
Mute This Topic: https://lists.cip-project.org/mt/74669306/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply related	[flat|nested] 18+ messages in thread

* Re: [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1
  2020-06-04  3:18 [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
                   ` (14 preceding siblings ...)
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 15/15] cpufreq: cpufreq-dt: avoid uninitialized variable warnings: Chen-Yu Tsai (Moxa)
@ 2020-06-04  3:45 ` Chen-Yu Tsai (Moxa)
  15 siblings, 0 replies; 18+ messages in thread
From: Chen-Yu Tsai (Moxa) @ 2020-06-04  3:45 UTC (permalink / raw)
  To: Nobuhiro Iwamatsu, Pavel Machek
  Cc: cip-dev, Johnson CH Chen (陳昭勳)

[-- Attachment #1: Type: text/plain, Size: 469 bytes --]

On Thu, Jun 4, 2020 at 11:26 AM Chen-Yu Tsai (Moxa) <wens@csie.org> wrote:
>
> Hi everyone,
>
> This is part 1 of MOXA's PM / OPP / cpufreq backport series. The whole
> series aims to backport patches related to PM / OPPv2 and cpufreq
> which were included in the v4.4 kernel from TI's SDK. The end goal is
> to include cpufreq-ti and convert am33xx to using it and OPPv2.

Looks like this didn't hit the mailing list. I will resend again.
Sorry for the noise.

ChenYu

[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4673): https://lists.cip-project.org/g/cip-dev/message/4673
Mute This Topic: https://lists.cip-project.org/mt/74665338/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply	[flat|nested] 18+ messages in thread

* Re: [cip-dev] [4.4.y-cip 01/15] PM / OPP: Add debugfs support
  2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 01/15] PM / OPP: Add debugfs support Chen-Yu Tsai (Moxa)
@ 2020-06-04  4:47   ` Viresh Kumar
  0 siblings, 0 replies; 18+ messages in thread
From: Viresh Kumar @ 2020-06-04  4:47 UTC (permalink / raw)
  To: Chen-Yu Tsai (Moxa)
  Cc: nobuhiro1.iwamatsu, pavel, cip-dev, JohnsonCH.Chen, Stephen Boyd,
	Rafael J . Wysocki

[-- Attachment #1: Type: text/plain, Size: 1043 bytes --]

On 04-06-20, 11:18, Chen-Yu Tsai (Moxa) wrote:
> From: Viresh Kumar <viresh.kumar@linaro.org>
> 
> commit deaa51465105a7eda19a627b10372f4f7c51a4df upstream.
> 
> This patch adds debugfs support to OPP layer to export OPPs and their
> properties for all the devices.
> 
> This creates a top level directory: /sys/kernel/debug/opp and then
> device specific directories (based on device names) inside it. For
> example: 'cpu0', 'cpu1', etc..
> 
> If multiple devices share the OPP table, then the real directory is
> created only for the first device. For all others, links are created to
> the real directory.
> 
> Inside the device specific directory, a separate directory is created
> for each OPP. And within that files per opp property.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Signed-off-by: Chen-Yu Tsai (Moxa) <wens@csie.org>

Please use --suppress-cc=all while sending patches internally.

-- 
viresh

[-- Attachment #2: Type: text/plain, Size: 419 bytes --]

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#4720): https://lists.cip-project.org/g/cip-dev/message/4720
Mute This Topic: https://lists.cip-project.org/mt/74669312/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy  [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply	[flat|nested] 18+ messages in thread

end of thread, other threads:[~2020-06-04 11:55 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-04  3:18 [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 01/15] PM / OPP: Add debugfs support Chen-Yu Tsai (Moxa)
2020-06-04  4:47   ` Viresh Kumar
2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 02/15] PM / OPP: Add "opp-supported-hw" binding Chen-Yu Tsai (Moxa)
2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 03/15] PM / OPP: Add {opp-microvolt|opp-microamp}-<name> binding Chen-Yu Tsai (Moxa)
2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 04/15] PM / OPP: Remove 'operating-points-names' binding Chen-Yu Tsai (Moxa)
2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 05/15] PM / OPP: Rename OPP nodes as opp@<opp-hz> Chen-Yu Tsai (Moxa)
2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 06/15] PM / OPP: Add missing doc comments Chen-Yu Tsai (Moxa)
2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 07/15] PM / OPP: Parse 'opp-supported-hw' binding Chen-Yu Tsai (Moxa)
2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 08/15] PM / OPP: Parse 'opp-<prop>-<name>' bindings Chen-Yu Tsai (Moxa)
2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 09/15] PM / OPP: Fix parsing of opp-microvolt and opp-microamp properties Chen-Yu Tsai (Moxa)
2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 10/15] PM / OPP: Set cpu_dev->id in cpumask first Chen-Yu Tsai (Moxa)
2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 11/15] PM / OPP: Use snprintf() instead of sprintf() Chen-Yu Tsai (Moxa)
2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 12/15] devicetree: bindings: Add optional dynamic-power-coefficient property Chen-Yu Tsai (Moxa)
2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 13/15] cpufreq-dt: Supply power coefficient when registering cooling devices Chen-Yu Tsai (Moxa)
2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 14/15] cpufreq-dt: fix handling regulator_get_voltage() result Chen-Yu Tsai (Moxa)
2020-06-04  3:18 ` [cip-dev] [4.4.y-cip 15/15] cpufreq: cpufreq-dt: avoid uninitialized variable warnings: Chen-Yu Tsai (Moxa)
2020-06-04  3:45 ` [cip-dev] [4.4.y-cip 00/15] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).