From: "Chen-Yu Tsai (Moxa)" <wens@csie.org>
To: nobuhiro1.iwamatsu@toshiba.co.jp, pavel@denx.de
Cc: cip-dev@lists.cip-project.org, JohnsonCH.Chen@moxa.com
Subject: [cip-dev] [PATCH 4.4.y-cip v3 11/14] devicetree: bindings: Add optional dynamic-power-coefficient property
Date: Tue, 9 Jun 2020 12:09:23 +0800 [thread overview]
Message-ID: <20200609040926.8910-12-wens@csie.org> (raw)
In-Reply-To: <20200609040926.8910-1-wens@csie.org>
[-- Attachment #1: Type: text/plain, Size: 2037 bytes --]
From: Punit Agrawal <punit.agrawal@arm.com>
commit 3be3f8f36e7349006f19c8c8f0d686e98462a993 upstream.
The dynamic power consumption of a device is proportional to the
square of voltage (V) and the clock frequency (f). It can be expressed as
Pdyn = dynamic-power-coefficient * V^2 * f.
The coefficient represents the running time dynamic power consumption in
units of mw/MHz/uVolt^2 and can be used in the above formula to
calculate the dynamic power in mW.
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chen-Yu Tsai (Moxa) <wens@csie.org>
---
Documentation/devicetree/bindings/arm/cpus.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 9ef9a2089a5e7..6b1d8ebb94b7b 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -243,6 +243,23 @@ nodes to be present and contain the properties described below.
Definition: Specifies the syscon node controlling the cpu core
power domains.
+ - dynamic-power-coefficient
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: A u32 value that represents the running time dynamic
+ power coefficient in units of mW/MHz/uVolt^2. The
+ coefficient can either be calculated from power
+ measurements or derived by analysis.
+
+ The dynamic power consumption of the CPU is
+ proportional to the square of the Voltage (V) and
+ the clock frequency (f). The coefficient is used to
+ calculate the dynamic power as below -
+
+ Pdyn = dynamic-power-coefficient * V^2 * f
+
+ where voltage is in uV, frequency is in MHz.
+
Example 1 (dual-cluster big.LITTLE system 32-bit):
cpus {
--
2.27.0.rc0
[-- Attachment #2: Type: text/plain, Size: 419 bytes --]
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#4785): https://lists.cip-project.org/g/cip-dev/message/4785
Mute This Topic: https://lists.cip-project.org/mt/74768072/4520388
Group Owner: cip-dev+owner@lists.cip-project.org
Unsubscribe: https://lists.cip-project.org/g/cip-dev/leave/8129055/727948398/xyzzy [cip-dev@archiver.kernel.org]
-=-=-=-=-=-=-=-=-=-=-=-
next prev parent reply other threads:[~2020-06-09 4:10 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-09 4:09 [cip-dev] [PATCH 4.4.y-cip v3 00/14] PM / OPP v2 & cpufreq backports part 1 Chen-Yu Tsai (Moxa)
2020-06-09 4:09 ` [cip-dev] [PATCH 4.4.y-cip v3 01/14] PM / OPP: Add debugfs support Chen-Yu Tsai (Moxa)
2020-06-09 4:09 ` [cip-dev] [PATCH 4.4.y-cip v3 02/14] PM / OPP: Add "opp-supported-hw" binding Chen-Yu Tsai (Moxa)
2020-06-09 4:09 ` [cip-dev] [PATCH 4.4.y-cip v3 03/14] PM / OPP: Add {opp-microvolt|opp-microamp}-<name> binding Chen-Yu Tsai (Moxa)
2020-06-09 4:09 ` [cip-dev] [PATCH 4.4.y-cip v3 04/14] PM / OPP: Remove 'operating-points-names' binding Chen-Yu Tsai (Moxa)
2020-06-09 4:09 ` [cip-dev] [PATCH 4.4.y-cip v3 05/14] PM / OPP: Rename OPP nodes as opp@<opp-hz> Chen-Yu Tsai (Moxa)
2020-06-09 4:09 ` [cip-dev] [PATCH 4.4.y-cip v3 06/14] PM / OPP: Add missing doc comments Chen-Yu Tsai (Moxa)
2020-06-09 4:09 ` [cip-dev] [PATCH 4.4.y-cip v3 07/14] PM / OPP: Parse 'opp-supported-hw' binding Chen-Yu Tsai (Moxa)
2020-06-09 4:09 ` [cip-dev] [PATCH 4.4.y-cip v3 08/14] PM / OPP: Parse 'opp-<prop>-<name>' bindings Chen-Yu Tsai (Moxa)
2020-06-09 4:09 ` [cip-dev] [PATCH 4.4.y-cip v3 09/14] PM / OPP: Set cpu_dev->id in cpumask first Chen-Yu Tsai (Moxa)
2020-06-09 4:09 ` [cip-dev] [PATCH 4.4.y-cip v3 10/14] PM / OPP: Use snprintf() instead of sprintf() Chen-Yu Tsai (Moxa)
2020-06-09 4:09 ` Chen-Yu Tsai (Moxa) [this message]
2020-06-09 4:09 ` [cip-dev] [PATCH 4.4.y-cip v3 12/14] cpufreq-dt: Supply power coefficient when registering cooling devices Chen-Yu Tsai (Moxa)
2020-06-09 4:09 ` [cip-dev] [PATCH 4.4.y-cip v3 13/14] cpufreq-dt: fix handling regulator_get_voltage() result Chen-Yu Tsai (Moxa)
2020-06-09 4:09 ` [cip-dev] [PATCH 4.4.y-cip v3 14/14] cpufreq: cpufreq-dt: avoid uninitialized variable warnings: Chen-Yu Tsai (Moxa)
2020-06-09 11:01 ` [cip-dev] [PATCH 4.4.y-cip v3 00/14] PM / OPP v2 & cpufreq backports part 1 Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200609040926.8910-12-wens@csie.org \
--to=wens@csie.org \
--cc=JohnsonCH.Chen@moxa.com \
--cc=cip-dev@lists.cip-project.org \
--cc=nobuhiro1.iwamatsu@toshiba.co.jp \
--cc=pavel@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).