From: "Lad Prabhakar" <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: cip-dev@lists.cip-project.org,
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>,
Pavel Machek <pavel@denx.de>
Cc: Biju Das <biju.das.jz@bp.renesas.com>
Subject: [PATCH 5.10.y-cip 03/39] mmc: renesas_sdhi: simplify reset routine a little
Date: Wed, 30 Mar 2022 19:54:18 +0100 [thread overview]
Message-ID: <20220330185454.10887-4-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <20220330185454.10887-1-prabhakar.mahadev-lad.rj@bp.renesas.com>
From: Wolfram Sang <wsa+renesas@sang-engineering.com>
commit 9f809065d86dec2070263acedaa5758f8c9e95a9 upstream.
The 'reset' pointer is only populated for Gen2+. So, we don't need to
check for that flag inside the routine.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20201110142058.36393-5-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
drivers/mmc/host/renesas_sdhi_core.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index fc210c314e6c..e264ba2bff29 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -552,6 +552,7 @@ static int renesas_sdhi_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_io
return 0;
}
+/* only populated for TMIO_MMC_MIN_RCAR2 */
static void renesas_sdhi_reset(struct tmio_mmc_host *host)
{
struct renesas_sdhi *priv = host_to_priv(host);
@@ -569,9 +570,7 @@ static void renesas_sdhi_reset(struct tmio_mmc_host *host)
sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL));
}
- if (host->pdata->flags & TMIO_MMC_MIN_RCAR2)
- sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK,
- TMIO_MASK_INIT_RCAR2);
+ sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, TMIO_MASK_INIT_RCAR2);
}
#define SH_MOBILE_SDHI_MIN_TAP_ROW 3
--
2.17.1
next prev parent reply other threads:[~2022-03-30 18:55 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-30 18:54 [PATCH 5.10.y-cip 00/39] Add SD/eMMC support for Renesas RZ/G2L SoC Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 01/39] mmc: renesas_sdhi: probe into TMIO after SCC parameters have been setup Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 02/39] mmc: renesas_sdhi: populate SCC pointer at the proper place Lad Prabhakar
2022-03-30 18:54 ` Lad Prabhakar [this message]
2022-03-30 18:54 ` [PATCH 5.10.y-cip 04/39] mmc: renesas_sdhi: clear TAPEN when resetting, too Lad Prabhakar
2022-03-31 10:13 ` Pavel Machek
2022-04-01 19:18 ` Prabhakar Mahadev Lad
2022-03-30 18:54 ` [PATCH 5.10.y-cip 05/39] mmc: renesas_sdhi: merge the SCC reset functions Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 06/39] mmc: renesas_sdhi: remove superfluous SCLKEN Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 07/39] mmc: renesas_sdhi: improve HOST_MODE usage Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 08/39] mmc: renesas_sdhi: don't hardcode SDIF values Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 09/39] mmc: renesas_sdhi: sort includes Lad Prabhakar
2022-03-31 10:14 ` Pavel Machek
2022-04-01 19:19 ` Prabhakar Mahadev Lad
2022-03-30 18:54 ` [PATCH 5.10.y-cip 10/39] mmc: tmio: set max_busy_timeout Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 11/39] mmc: tmio: add hook for custom busy_wait calculation Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 12/39] mmc: renesas_sdhi: populate hook for longer busy_wait Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 13/39] mmc: renesas_internal_dmac: add pre_req and post_req support Lad Prabhakar
2022-03-31 10:16 ` Pavel Machek
2022-04-01 19:20 ` Prabhakar Mahadev Lad
2022-03-30 18:54 ` [PATCH 5.10.y-cip 14/39] mmc: tmio: Add data timeout error detection Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 15/39] mmc: renesas_sdhi: Add a condition of cmd/data timeout for retune Lad Prabhakar
2022-03-31 10:18 ` Pavel Machek
2022-04-01 19:27 ` Prabhakar Mahadev Lad
2022-03-30 18:54 ` [PATCH 5.10.y-cip 16/39] mmc: tmio: support custom irq masks Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 17/39] mmc: renesas_sdhi: use custom mask for TMIO_MASK_ALL Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 18/39] mmc: tmio: abort DMA before reset Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 19/39] mmc: tmio: restore bus width when resetting Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 20/39] mmc: renesas_sdhi: break SCC reset into own function Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 21/39] mmc: renesas_sdhi: do hard reset if possible Lad Prabhakar
2022-03-31 10:20 ` Pavel Machek
2022-04-01 19:29 ` Prabhakar Mahadev Lad
2022-03-30 18:54 ` [PATCH 5.10.y-cip 22/39] mmc: tmio: always flag retune when resetting and a card is present Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 23/39] mmc: tmio: always restore irq register Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 24/39] mmc: tmio: reenable card irqs after the reset callback Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 25/39] mmc: tmio: reinit card irqs in reset routine Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 26/39] clk: renesas: rzg2l: Add SDHI clk mux support Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 27/39] clk: renesas: rzg2l: Add missing kerneldoc for resets Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 28/39] clk: renesas: rzg2l: Check return value of pm_genpd_init() Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 29/39] clk: renesas: rzg2l: propagate return value of_genpd_add_provider_simple() Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 30/39] clk: renesas: r9a07g044: Add SDHI clock and reset entries Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 31/39] dt-bindings: Fix errors in 'if' schemas Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 32/39] dt-bindings: Drop redundant minItems/maxItems Lad Prabhakar
2022-03-31 10:22 ` Pavel Machek
2022-04-01 19:32 ` Prabhakar Mahadev Lad
2022-03-30 18:54 ` [PATCH 5.10.y-cip 33/39] dt-bindings: mmc: renesas,sdhi: Fix dtbs-check warning Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 34/39] dt-bindings: mmc: renesas,sdhi: Document RZ/G2L bindings Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 35/39] dt-bindings: mmc: renesas,sdhi: Add optional SDnH clock Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 36/39] dt-bindings: mmc: renesas,sdhi: Rename RZ/G2L clocks Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 37/39] arm64: dts: renesas: r9a07g044: Add SDHI nodes Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 38/39] arm64: dts: renesas: rzg2l-smarc-som: Enable eMMC on SMARC platform Lad Prabhakar
2022-03-30 18:54 ` [PATCH 5.10.y-cip 39/39] arm64: dts: renesas: rzg2l-smarc: Enable microSD " Lad Prabhakar
2022-03-31 8:58 ` [PATCH 5.10.y-cip 00/39] Add SD/eMMC support for Renesas RZ/G2L SoC Pavel Machek
2022-03-31 9:28 ` Pavel Machek
2022-03-31 11:29 ` Prabhakar Mahadev Lad
2022-03-31 12:49 ` Pavel Machek
2022-03-31 23:35 ` nobuhiro1.iwamatsu
2022-04-01 19:35 ` Prabhakar Mahadev Lad
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220330185454.10887-4-prabhakar.mahadev-lad.rj@bp.renesas.com \
--to=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=cip-dev@lists.cip-project.org \
--cc=nobuhiro1.iwamatsu@toshiba.co.jp \
--cc=pavel@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).