Hi, > -----Original Message----- > From: Biju Das [mailto:biju.das.jz@bp.renesas.com] > Sent: Thursday, August 27, 2020 4:07 PM > To: Pavel Machek > Cc: Chris Paterson ; cip-dev@lists.cip-project.org; iwamatsu nobuhiro(岩松 信洋 □Ｓ > ＷＣ◯ＡＣＴ) ; Prabhakar Mahadev Lad > Subject: RE: [PATCH 4.19.y-cip 00/10] Add support for [H]SCIF/SDHI/I2C/RWDT/MSIOF > > Hi Pavel, > > Thanks for the feedback. > > > Subject: Re: [PATCH 4.19.y-cip 00/10] Add support for > > [H]SCIF/SDHI/I2C/RWDT/MSIOF > > > > Hi! > > > > > Thanks for the feedback. > > > > > > > Subject: Re: [PATCH 4.19.y-cip 00/10] Add support for > > > > [H]SCIF/SDHI/I2C/RWDT/MSIOF > > > > > > > > Hi! > > > > > > > > > Add RZ/G2H SoC support for [H]SCIF/SDHI/I2C/RWDT/MSIOF on > > > > > 4.19.y-cip > > > > kernel. > > > > > > > > > > All the patches in this series are cherry-piced from ML, except > > > > > [1] which is a new patch similar to the workdone for other similar > > > > > SoC's > > > > > > > > Series looks good to me. (But gitlab testing does not seem to work, > > > > and it would be good to test it before applying). > > > > > > I am not sure about the failure. If it is related to testing on > > > RZ/G2H board, then > > > > No, it is definitely not related to your boards. Nothing ever builds... it can't be > > your fault or fault of your board, but it just prevents testing :-(. > > I have applied the entire series and it builds fine in my environment with linux-4.19.y-cip(4.19.138-cip32). > What is the build issue related to gitlab testing? > As I write other mail, this seems to be a issue in the environment that runs gitlab runner. > Cheers, > Biju > Best regards, Nobuhiro > > Renesas Electronics Europe GmbH, Geschaeftsfuehrer/President: Carsten Jauch, Sitz der Gesellschaft/Registered office: > Duesseldorf, Arcadiastrasse 10, 40472 Duesseldorf, Germany, Handelsregister/Commercial Register: Duesseldorf, HRB 3708 > USt-IDNr./Tax identification no.: DE 119353406 WEEE-Reg.-Nr./WEEE reg. no.: DE 14978647