From: Denton Liu <liu.denton@gmail.com>
To: Git Mailing List <git@vger.kernel.org>
Cc: "Eric Sunshine" <sunshine@sunshineco.com>,
"Johannes Sixt" <j6t@kdbg.org>,
"SZEDER Gábor" <szeder.dev@gmail.com>,
"Junio C Hamano" <gitster@pobox.com>
Subject: [PATCH v5 00/14] t5520: various test cleanup
Date: Mon, 11 Nov 2019 16:13:38 -0800 [thread overview]
Message-ID: <cover.1573517561.git.liu.denton@gmail.com> (raw)
In-Reply-To: <cover.1573152598.git.liu.denton@gmail.com>
Like earlier patchsets, I want to implement a feature that involves
modifications to the test suite. Since that feature will probably take a
while to polish up, however, let's clean up the test suite in a separate
patchset first so it's not blocked by the feature work.
1/15 is a general improvement to test_rev_cmp() that will be used later
in the series.
Changes since v4:
* Cleaned up test_cmp_rev() logic with suggestions from Junio
Changes since v3:
* Rebased and tested on top of v2.24.0
Changes since v2:
* Drop 't7408: replace `test_must_fail test_path_is_file`' since it's
not a rabbit hole we want to go into right now
* Fix the output of `test_cmp_rev !` when revs are actually equal
* Rebase against the latest master since this topic hasn't been picked
up yet
Changes since v1:
* Incorporate Eric's feedback
Denton Liu (14):
t: teach test_cmp_rev to accept ! for not-equals
t5520: improve test style
t5520: use sq for test case names
t5520: let sed open its own input
t5520: replace test -f with test-lib functions
t5520: remove spaces after redirect operator
t5520: use test_line_count where possible
t5520: replace test -{n,z} with test-lib functions
t5520: use test_cmp_rev where possible
t5520: test single-line files by git with test_cmp
t5520: don't put git in upstream of pipe
t5520: replace subshell cat comparison with test_cmp
t5520: remove redundant lines in test cases
t5520: replace `! git` with `test_must_fail git`
t/t2400-worktree-add.sh | 4 +-
t/t3400-rebase.sh | 2 +-
t/t3421-rebase-topology-linear.sh | 6 +-
t/t3430-rebase-merges.sh | 2 +-
t/t3432-rebase-fast-forward.sh | 2 +-
t/t3501-revert-cherry-pick.sh | 2 +-
t/t3508-cherry-pick-many-commits.sh | 2 +-
t/t5520-pull.sh | 343 +++++++++++++++++-----------
t/test-lib-functions.sh | 25 +-
9 files changed, 236 insertions(+), 152 deletions(-)
Range-diff against v4:
1: 06f89b85f3 ! 1: 3c58df27c4 t: teach test_cmp_rev to accept ! for not-equals
@@ Metadata
## Commit message ##
t: teach test_cmp_rev to accept ! for not-equals
- Currently, in the case where we are using test_cmp_rev() to report
- not-equals, we write `! test_cmp_rev`. However, since test_cmp_rev()
- contains
+ In the case where we are using test_cmp_rev() to report not-equals, we
+ write `! test_cmp_rev`. However, since test_cmp_rev() contains
r1=$(git rev-parse --verify "$1") &&
r2=$(git rev-parse --verify "$2") &&
- In the case where `git rev-parse` segfaults and dies unexpectedly, the
- failure will be ignored.
+ `! test_cmp_rev` will succeed if any of the rev-parses fail. This
+ behavior is not desired. We want the rev-parses to _always_ be
+ successful.
Rewrite test_cmp_rev() to optionally accept "!" as the first argument to
do a not-equals comparison. Rewrite `! test_cmp_rev` to `test_cmp_rev !`
in all tests to take advantage of this new functionality.
+ Also, rewrite the rev-parse logic to end with a `|| return 1` instead of
+ &&-chaining into the rev-comparison logic. This makes it obvious to
+ future readers that we explicitly intend on returning early if either of
+ the rev-parses fail.
+
Signed-off-by: Denton Liu <liu.denton@gmail.com>
## t/t2400-worktree-add.sh ##
@@ t/test-lib-functions.sh: test_must_be_empty () {
+# provided first, that its other two parameters refer to different
+# revisions.
test_cmp_rev () {
-+ local inverted_op
-+ inverted_op='!='
++ local op
++ op='='
+ if test $# -ge 1 && test "x$1" = 'x!'
+ then
-+ inverted_op='='
++ op='!='
+ shift
+ fi
if test $# != 2
then
error "bug in the test script: test_cmp_rev requires two revisions, but got $#"
-@@ t/test-lib-functions.sh: test_cmp_rev () {
+ else
local r1 r2
r1=$(git rev-parse --verify "$1") &&
- r2=$(git rev-parse --verify "$2") &&
+- r2=$(git rev-parse --verify "$2") &&
- if test "$r1" != "$r2"
-+ if test "$r1" "$inverted_op" "$r2"
++ r2=$(git rev-parse --verify "$2") || return 1
++
++ if ! test "$r1" "$op" "$r2"
then
+ local comp_out
-+ if "x$inverted_op" = 'x='
++ if "x$op" = 'x='
+ then
-+ comp_out='the same'
-+ else
+ comp_out='different'
++ else
++ comp_out='the same'
+ fi
cat >&4 <<-EOF
- error: two revisions point to different objects:
2: 11714ca897 = 2: 023e0ccc11 t5520: improve test style
3: 2c27c8d60a = 3: 1bb65a59da t5520: use sq for test case names
4: 5a196cf136 = 4: d2fbae6ade t5520: let sed open its own input
5: 0c8baddc7d = 5: 1d73546eb6 t5520: replace test -f with test-lib functions
6: 2775817d02 = 6: f1141f244f t5520: remove spaces after redirect operator
7: d71fe3d097 = 7: 5106004e95 t5520: use test_line_count where possible
8: dd16809b68 = 8: 85b444e8a6 t5520: replace test -{n,z} with test-lib functions
9: abfa6539aa = 9: 3d43784391 t5520: use test_cmp_rev where possible
10: 06cb5c1302 = 10: 2f9052fd94 t5520: test single-line files by git with test_cmp
11: f47f11ccfa = 11: 3fd10a58c6 t5520: don't put git in upstream of pipe
12: 3dfc417670 = 12: ed78ed75bd t5520: replace subshell cat comparison with test_cmp
13: 575bd0f0cd = 13: 7888757bd0 t5520: remove redundant lines in test cases
14: bd92e3821e = 14: 1bc7ad364f t5520: replace `! git` with `test_must_fail git`
--
2.24.0.300.g722ba42680
next prev parent reply other threads:[~2019-11-12 0:13 UTC|newest]
Thread overview: 116+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-17 23:16 [PATCH 00/12] t5520: various test cleanup Denton Liu
2019-10-17 23:16 ` [PATCH 01/12] t5520: improve test style Denton Liu
2019-10-17 23:16 ` [PATCH 02/12] t5520: use sq for test case names Denton Liu
2019-10-17 23:17 ` [PATCH 03/12] t5520: let sed open its own input Denton Liu
2019-10-17 23:17 ` [PATCH 04/12] t5520: replace test -f with test_path_is_file Denton Liu
2019-10-17 23:26 ` Eric Sunshine
2019-10-17 23:35 ` [PATCH 4.5/12] t5520: replace test -f with test-lib functions Denton Liu
2019-10-18 0:11 ` Eric Sunshine
2019-10-17 23:17 ` [PATCH 05/12] t5520: remove spaces after redirect operator Denton Liu
2019-10-17 23:17 ` [PATCH 06/12] t5520: use test_line_count where possible Denton Liu
2019-10-17 23:17 ` [PATCH 07/12] t5520: replace test -{n,z} with test-lib functions Denton Liu
2019-10-17 23:31 ` Eric Sunshine
2019-10-17 23:17 ` [PATCH 08/12] t5520: use test_cmp_rev where possible Denton Liu
2019-10-17 23:41 ` Eric Sunshine
2019-10-18 18:52 ` Denton Liu
2019-10-23 13:53 ` Eric Sunshine
2019-10-17 23:17 ` [PATCH 09/12] t5520: test single-line files by git with test_cmp Denton Liu
2019-10-17 23:49 ` Eric Sunshine
2019-10-17 23:17 ` [PATCH 10/12] t5520: don't put git in upstream of pipe Denton Liu
2019-10-17 23:17 ` [PATCH 11/12] t5520: replace subshell cat comparison with test_cmp Denton Liu
2019-10-17 23:17 ` [PATCH 12/12] t5520: replace `! git` with `test_must_fail git` Denton Liu
2019-10-18 22:10 ` [PATCH v2 00/15] t5520: various test cleanup Denton Liu
2019-10-18 22:04 ` [PATCH v2 01/15] t7408: replace `test_must_fail test_path_is_file` Denton Liu
2019-10-19 11:58 ` Johannes Sixt
2019-10-18 22:04 ` [PATCH v2 09/15] t5520: replace test -{n,z} with test-lib functions Denton Liu
2019-10-18 22:04 ` [PATCH v2 11/15] t5520: test single-line files by git with test_cmp Denton Liu
2019-10-18 22:10 ` [PATCH v2 02/15] t: teach test_cmp_rev to accept ! for not-equals Denton Liu
2019-10-18 22:45 ` SZEDER Gábor
2019-10-18 22:10 ` [PATCH v2 03/15] t5520: improve test style Denton Liu
2019-10-18 22:10 ` [PATCH v2 04/15] t5520: use sq for test case names Denton Liu
2019-10-18 22:10 ` [PATCH v2 05/15] t5520: let sed open its own input Denton Liu
2019-10-18 22:10 ` [PATCH v2 06/15] t5520: replace test -f with test-lib functions Denton Liu
2019-10-18 22:10 ` [PATCH v2 07/15] t5520: remove spaces after redirect operator Denton Liu
2019-10-18 22:10 ` [PATCH v2 08/15] t5520: use test_line_count where possible Denton Liu
2019-10-18 22:10 ` [PATCH v2 10/15] t5520: use test_cmp_rev " Denton Liu
2019-10-18 22:10 ` [PATCH v2 12/15] t5520: don't put git in upstream of pipe Denton Liu
2019-10-18 22:10 ` [PATCH v2 13/15] t5520: replace subshell cat comparison with test_cmp Denton Liu
2019-10-18 22:10 ` [PATCH v2 14/15] t5520: remove redundant lines in test cases Denton Liu
2019-10-18 22:10 ` [PATCH v2 15/15] t5520: replace `! git` with `test_must_fail git` Denton Liu
2019-10-18 22:14 ` [PATCH v2 00/15] t5520: various test cleanup Denton Liu
2019-10-22 10:19 ` [PATCH v3 00/14] " Denton Liu
2019-10-22 10:19 ` [PATCH v3 01/14] t: teach test_cmp_rev to accept ! for not-equals Denton Liu
2019-10-22 10:19 ` [PATCH v3 02/14] t5520: improve test style Denton Liu
2019-10-22 10:19 ` [PATCH v3 03/14] t5520: use sq for test case names Denton Liu
2019-10-22 10:20 ` [PATCH v3 04/14] t5520: let sed open its own input Denton Liu
2019-10-22 10:20 ` [PATCH v3 05/14] t5520: replace test -f with test-lib functions Denton Liu
2019-10-22 10:20 ` [PATCH v3 06/14] t5520: remove spaces after redirect operator Denton Liu
2019-10-22 10:20 ` [PATCH v3 07/14] t5520: use test_line_count where possible Denton Liu
2019-10-22 10:20 ` [PATCH v3 08/14] t5520: replace test -{n,z} with test-lib functions Denton Liu
2019-10-22 10:20 ` [PATCH v3 09/14] t5520: use test_cmp_rev where possible Denton Liu
2019-10-22 10:20 ` [PATCH v3 10/14] t5520: test single-line files by git with test_cmp Denton Liu
2019-10-22 10:20 ` [PATCH v3 11/14] t5520: don't put git in upstream of pipe Denton Liu
2019-10-22 10:20 ` [PATCH v3 12/14] t5520: replace subshell cat comparison with test_cmp Denton Liu
2019-10-22 10:20 ` [PATCH v3 13/14] t5520: remove redundant lines in test cases Denton Liu
2019-10-22 10:20 ` [PATCH v3 14/14] t5520: replace `! git` with `test_must_fail git` Denton Liu
2019-10-24 23:21 ` [PATCH v3 00/14] t5520: various test cleanup Denton Liu
2019-10-25 3:44 ` Junio C Hamano
2019-11-04 19:17 ` Denton Liu
2019-11-06 2:37 ` Junio C Hamano
2019-11-07 18:51 ` [PATCH v4 " Denton Liu
2019-11-07 18:51 ` [PATCH v4 01/14] t: teach test_cmp_rev to accept ! for not-equals Denton Liu
2019-11-08 3:24 ` Junio C Hamano
2019-11-08 8:23 ` Denton Liu
2019-11-08 12:49 ` Junio C Hamano
2019-11-08 21:19 ` Denton Liu
2019-11-10 6:58 ` Junio C Hamano
2019-11-07 18:51 ` [PATCH v4 02/14] t5520: improve test style Denton Liu
2019-11-07 18:51 ` [PATCH v4 03/14] t5520: use sq for test case names Denton Liu
2019-11-07 18:51 ` [PATCH v4 04/14] t5520: let sed open its own input Denton Liu
2019-11-07 18:51 ` [PATCH v4 05/14] t5520: replace test -f with test-lib functions Denton Liu
2019-11-07 18:51 ` [PATCH v4 06/14] t5520: remove spaces after redirect operator Denton Liu
2019-11-07 18:51 ` [PATCH v4 07/14] t5520: use test_line_count where possible Denton Liu
2019-11-07 18:51 ` [PATCH v4 08/14] t5520: replace test -{n,z} with test-lib functions Denton Liu
2019-11-07 18:51 ` [PATCH v4 09/14] t5520: use test_cmp_rev where possible Denton Liu
2019-11-07 18:51 ` [PATCH v4 10/14] t5520: test single-line files by git with test_cmp Denton Liu
2019-11-07 18:51 ` [PATCH v4 11/14] t5520: don't put git in upstream of pipe Denton Liu
2019-11-07 18:51 ` [PATCH v4 12/14] t5520: replace subshell cat comparison with test_cmp Denton Liu
2019-11-07 18:51 ` [PATCH v4 13/14] t5520: remove redundant lines in test cases Denton Liu
2019-11-07 18:51 ` [PATCH v4 14/14] t5520: replace `! git` with `test_must_fail git` Denton Liu
2019-11-12 0:13 ` Denton Liu [this message]
2019-11-12 0:13 ` [PATCH v5 01/14] t: teach test_cmp_rev to accept ! for not-equals Denton Liu
2019-11-12 6:52 ` Junio C Hamano
2019-11-12 19:38 ` [PATCH] fixup! " Denton Liu
2019-11-12 0:13 ` [PATCH v5 02/14] t5520: improve test style Denton Liu
2019-11-12 0:13 ` [PATCH v5 03/14] t5520: use sq for test case names Denton Liu
2019-11-12 0:13 ` [PATCH v5 04/14] t5520: let sed open its own input Denton Liu
2019-11-12 0:13 ` [PATCH v5 05/14] t5520: replace test -f with test-lib functions Denton Liu
2019-11-12 0:13 ` [PATCH v5 06/14] t5520: remove spaces after redirect operator Denton Liu
2019-11-12 0:13 ` [PATCH v5 07/14] t5520: use test_line_count where possible Denton Liu
2019-11-12 0:13 ` [PATCH v5 08/14] t5520: replace test -{n,z} with test-lib functions Denton Liu
2019-11-12 0:14 ` [PATCH v5 09/14] t5520: use test_cmp_rev where possible Denton Liu
2019-11-12 0:14 ` [PATCH v5 10/14] t5520: test single-line files by git with test_cmp Denton Liu
2019-11-12 5:17 ` Junio C Hamano
2019-11-12 23:06 ` Denton Liu
2019-11-12 0:14 ` [PATCH v5 11/14] t5520: don't put git in upstream of pipe Denton Liu
2019-11-12 0:14 ` [PATCH v5 12/14] t5520: replace subshell cat comparison with test_cmp Denton Liu
2019-11-12 0:14 ` [PATCH v5 13/14] t5520: remove redundant lines in test cases Denton Liu
2019-11-12 0:14 ` [PATCH v5 14/14] t5520: replace `! git` with `test_must_fail git` Denton Liu
2019-11-12 23:07 ` [PATCH v6 00/14] t5520: various test cleanup Denton Liu
2019-11-12 23:07 ` [PATCH v6 01/14] t: teach test_cmp_rev to accept ! for not-equals Denton Liu
2019-11-13 1:57 ` Junio C Hamano
2019-11-14 0:52 ` Denton Liu
2019-11-12 23:07 ` [PATCH v6 02/14] t5520: improve test style Denton Liu
2019-11-12 23:07 ` [PATCH v6 03/14] t5520: use sq for test case names Denton Liu
2019-11-12 23:07 ` [PATCH v6 04/14] t5520: let sed open its own input Denton Liu
2019-11-12 23:07 ` [PATCH v6 05/14] t5520: replace test -f with test-lib functions Denton Liu
2019-11-12 23:07 ` [PATCH v6 06/14] t5520: remove spaces after redirect operator Denton Liu
2019-11-12 23:08 ` [PATCH v6 07/14] t5520: use test_line_count where possible Denton Liu
2019-11-12 23:08 ` [PATCH v6 08/14] t5520: replace test -{n,z} with test-lib functions Denton Liu
2019-11-12 23:08 ` [PATCH v6 09/14] t5520: use test_cmp_rev where possible Denton Liu
2019-11-12 23:08 ` [PATCH v6 10/14] t5520: test single-line files by git with test_cmp Denton Liu
2019-11-12 23:08 ` [PATCH v6 11/14] t5520: don't put git in upstream of pipe Denton Liu
2019-11-12 23:08 ` [PATCH v6 12/14] t5520: replace $(cat ...) comparison with test_cmp Denton Liu
2019-11-12 23:08 ` [PATCH v6 13/14] t5520: remove redundant lines in test cases Denton Liu
2019-11-12 23:08 ` [PATCH v6 14/14] t5520: replace `! git` with `test_must_fail git` Denton Liu
2019-11-13 1:59 ` [PATCH v6 00/14] t5520: various test cleanup Junio C Hamano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1573517561.git.liu.denton@gmail.com \
--to=liu.denton@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=j6t@kdbg.org \
--cc=sunshine@sunshineco.com \
--cc=szeder.dev@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.