Re: [PATCH v2] arm64/dts/qcom/sc7180: Add Display Port dt node

From: khsieh@codeaurora.org
To: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: robdclark@gmail.com, sean@poorly.run, swboyd@chromium.org,
	vkoul@kernel.org, agross@kernel.org, robh+dt@kernel.org,
	devicetree@vger.kernel.org, abhinavk@codeaurora.org,
	aravindh@codeaurora.org, freedreno@lists.freedesktop.org,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] arm64/dts/qcom/sc7180: Add Display Port dt node
Date: Thu, 03 Jun 2021 14:28:37 -0700	[thread overview]
Message-ID: <d3ec375b9cbe72030e240a84a6c7e13d@codeaurora.org> (raw)
In-Reply-To: <YLkI/6ItCz+SbbuJ@yoga>

On 2021-06-03 09:53, Bjorn Andersson wrote:
> On Thu 03 Jun 11:09 CDT 2021, Kuogee Hsieh wrote:
> 
>> Add DP device node on sc7180.
>> 
>> Changes in v2:
>> -- replace msm_dp with dp
>> -- replace dp_opp_table with opp_table
>> 
> 
> I'm sorry for those suggestions, I don't like either one of them.
> 
> And for everything but changes to the DRM code the changelog goes below
> the --- line, so it's not part of the git history.
> 
>> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
>> ---
>>  arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi |  9 ++++
>>  arch/arm64/boot/dts/qcom/sc7180.dtsi         | 78 
>> ++++++++++++++++++++++++++++
>>  2 files changed, 87 insertions(+)
>> 
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi 
>> b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> index 24d293e..40367a2 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> @@ -786,6 +786,15 @@ hp_i2c: &i2c9 {
>>  	status = "okay";
>>  };
>> 
>> +&dp {
>> +        status = "okay";
>> +        pinctrl-names = "default";
>> +        pinctrl-0 = <&dp_hot_plug_det>;
>> +        data-lanes = <0 1>;
> 
> Is it a limitation of the EC in Trogdor that you can only do 2 lanes?

yes,

> 
>> +        vdda-1p2-supply = <&vdda_usb_ss_dp_1p2>;
>> +        vdda-0p9-supply = <&vdda_usb_ss_dp_core>;
>> +};
>> +
>>  &pm6150_adc {
>>  	charger-thermistor@4f {
>>  		reg = <ADC5_AMUX_THM3_100K_PU>;
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi 
>> b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> index 6228ba2..05a4133 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> @@ -3032,6 +3032,13 @@
>>  							remote-endpoint = <&dsi0_in>;
>>  						};
>>  					};
>> +
>> +					port@2 {
>> +						reg = <2>;
>> +						dpu_intf0_out: endpoint {
>> +							remote-endpoint = <&dp_in>;
>> +						};
>> +					};
>>  				};
>> 
>>  				mdp_opp_table: mdp-opp-table {
>> @@ -3148,6 +3155,77 @@
>> 
>>  				status = "disabled";
>>  			};
>> +
>> +			dp: displayport-controller@ae90000 {
> 
> If you label this "mdss_dp", then it will naturally group with other
> mdss properties in trogdor.dtsi (which should be sorted 
> alphabetically).
> 
>> +				compatible = "qcom,sc7180-dp";
>> +				status = "disabled";
>> +
>> +				reg = <0 0x0ae90000 0 0x1400>;
>> +
>> +				interrupt-parent = <&mdss>;
>> +				interrupts = <12>;
>> +
>> +				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
>> +					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
>> +					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
>> +					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
>> +					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
>> +				clock-names = "core_iface", "core_aux", "ctrl_link",
>> +					      "ctrl_link_iface", "stream_pixel";
>> +				#clock-cells = <1>;
>> +				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
>> +						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
>> +				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
>> +				phys = <&dp_phy>;
>> +				phy-names = "dp";
>> +
>> +				operating-points-v2 = <&opp_table>;
>> +				power-domains = <&rpmhpd SC7180_CX>;
> 
> Just curious, but isn't the DP block in the MDSS_GDCS? Or do we need to
> mention CX here in order for the opp framework to apply required-opps
> of CX?
> 
>> +
>> +				#sound-dai-cells = <0>;
>> +
>> +				ports {
>> +					#address-cells = <1>;
>> +					#size-cells = <0>;
>> +					port@0 {
>> +						reg = <0>;
>> +						dp_in: endpoint {
>> +							remote-endpoint = <&dpu_intf0_out>;
>> +						};
>> +					};
>> +
>> +					port@1 {
>> +						reg = <1>;
>> +						dp_out: endpoint { };
>> +					};
>> +				};
>> +
>> +				opp_table: dp-opp-table {
> 
> The one and only "opp_table" of the sc7180 :)
> Maybe name it dp_opp_table instead?
> 
> Regards,
> Bjorn
> 
>> +					compatible = "operating-points-v2";
>> +
>> +					opp-160000000 {
>> +						opp-hz = /bits/ 64 <160000000>;
>> +						required-opps = <&rpmhpd_opp_low_svs>;
>> +					};
>> +
>> +					opp-270000000 {
>> +						opp-hz = /bits/ 64 <270000000>;
>> +						required-opps = <&rpmhpd_opp_svs>;
>> +					};
>> +
>> +					opp-540000000 {
>> +						opp-hz = /bits/ 64 <540000000>;
>> +						required-opps = <&rpmhpd_opp_svs_l1>;
>> +					};
>> +
>> +					opp-810000000 {
>> +						opp-hz = /bits/ 64 <810000000>;
>> +						required-opps = <&rpmhpd_opp_nom>;
>> +					};
>> +				};
>> +			};
>> +
>> +
>>  		};
>> 
>>  		dispcc: clock-controller@af00000 {
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
>> Forum,
>> a Linux Foundation Collaborative Project
>>