From: Shaohua Li <shli@fb.com>
To: <linux-block@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <kernel-team@fb.com>, <axboe@fb.com>, <tj@kernel.org>,
<vgoyal@redhat.com>
Subject: [PATCH V5 02/17] blk-throttle: prepare support multiple limits
Date: Thu, 15 Dec 2016 12:32:53 -0800 [thread overview]
Message-ID: <d8473b6b74c2390f6e7cc8eda03cecedfa532226.1481833017.git.shli@fb.com> (raw)
In-Reply-To: <cover.1481833017.git.shli@fb.com>
We are going to support low/max limit, each cgroup will have 2 limits
after that. This patch prepares for the multiple limits change.
Signed-off-by: Shaohua Li <shli@fb.com>
---
block/blk-throttle.c | 114 +++++++++++++++++++++++++++++++++------------------
1 file changed, 73 insertions(+), 41 deletions(-)
diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index e45bf50..a75bfa2 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -83,6 +83,11 @@ enum tg_state_flags {
#define rb_entry_tg(node) rb_entry((node), struct throtl_grp, rb_node)
+enum {
+ LIMIT_MAX,
+ LIMIT_CNT,
+};
+
struct throtl_grp {
/* must be the first member */
struct blkg_policy_data pd;
@@ -120,10 +125,10 @@ struct throtl_grp {
bool has_rules[2];
/* bytes per second rate limits */
- uint64_t bps[2];
+ uint64_t bps[2][LIMIT_CNT];
/* IOPS limits */
- unsigned int iops[2];
+ unsigned int iops[2][LIMIT_CNT];
/* Number of bytes disptached in current slice */
uint64_t bytes_disp[2];
@@ -147,6 +152,8 @@ struct throtl_data
/* Work for dispatching throttled bios */
struct work_struct dispatch_work;
+ unsigned int limit_index;
+ bool limit_valid[LIMIT_CNT];
};
static void throtl_pending_timer_fn(unsigned long arg);
@@ -198,6 +205,16 @@ static struct throtl_data *sq_to_td(struct throtl_service_queue *sq)
return container_of(sq, struct throtl_data, service_queue);
}
+static uint64_t tg_bps_limit(struct throtl_grp *tg, int rw)
+{
+ return tg->bps[rw][tg->td->limit_index];
+}
+
+static unsigned int tg_iops_limit(struct throtl_grp *tg, int rw)
+{
+ return tg->iops[rw][tg->td->limit_index];
+}
+
/**
* throtl_log - log debug message via blktrace
* @sq: the service_queue being reported
@@ -320,7 +337,7 @@ static void throtl_service_queue_init(struct throtl_service_queue *sq)
static struct blkg_policy_data *throtl_pd_alloc(gfp_t gfp, int node)
{
struct throtl_grp *tg;
- int rw;
+ int rw, index;
tg = kzalloc_node(sizeof(*tg), gfp, node);
if (!tg)
@@ -334,10 +351,12 @@ static struct blkg_policy_data *throtl_pd_alloc(gfp_t gfp, int node)
}
RB_CLEAR_NODE(&tg->rb_node);
- tg->bps[READ] = U64_MAX;
- tg->bps[WRITE] = U64_MAX;
- tg->iops[READ] = UINT_MAX;
- tg->iops[WRITE] = UINT_MAX;
+ for (rw = READ; rw <= WRITE; rw++) {
+ for (index = 0; index < LIMIT_CNT; index++) {
+ tg->bps[rw][index] = U64_MAX;
+ tg->iops[rw][index] = UINT_MAX;
+ }
+ }
return &tg->pd;
}
@@ -376,11 +395,14 @@ static void throtl_pd_init(struct blkg_policy_data *pd)
static void tg_update_has_rules(struct throtl_grp *tg)
{
struct throtl_grp *parent_tg = sq_to_tg(tg->service_queue.parent_sq);
+ struct throtl_data *td = tg->td;
int rw;
for (rw = READ; rw <= WRITE; rw++)
tg->has_rules[rw] = (parent_tg && parent_tg->has_rules[rw]) ||
- (tg->bps[rw] != U64_MAX || tg->iops[rw] != UINT_MAX);
+ (td->limit_valid[td->limit_index] &&
+ (tg_bps_limit(tg, rw) != U64_MAX ||
+ tg_iops_limit(tg, rw) != UINT_MAX));
}
static void throtl_pd_online(struct blkg_policy_data *pd)
@@ -632,11 +654,11 @@ static inline void throtl_trim_slice(struct throtl_grp *tg, bool rw)
if (!nr_slices)
return;
- tmp = tg->bps[rw] * throtl_slice * nr_slices;
+ tmp = tg_bps_limit(tg, rw) * throtl_slice * nr_slices;
do_div(tmp, HZ);
bytes_trim = tmp;
- io_trim = (tg->iops[rw] * throtl_slice * nr_slices)/HZ;
+ io_trim = (tg_iops_limit(tg, rw) * throtl_slice * nr_slices) / HZ;
if (!bytes_trim && !io_trim)
return;
@@ -682,7 +704,7 @@ static bool tg_with_in_iops_limit(struct throtl_grp *tg, struct bio *bio,
* have been trimmed.
*/
- tmp = (u64)tg->iops[rw] * jiffy_elapsed_rnd;
+ tmp = (u64)tg_iops_limit(tg, rw) * jiffy_elapsed_rnd;
do_div(tmp, HZ);
if (tmp > UINT_MAX)
@@ -697,7 +719,7 @@ static bool tg_with_in_iops_limit(struct throtl_grp *tg, struct bio *bio,
}
/* Calc approx time to dispatch */
- jiffy_wait = ((tg->io_disp[rw] + 1) * HZ)/tg->iops[rw] + 1;
+ jiffy_wait = ((tg->io_disp[rw] + 1) * HZ) / tg_iops_limit(tg, rw) + 1;
if (jiffy_wait > jiffy_elapsed)
jiffy_wait = jiffy_wait - jiffy_elapsed;
@@ -724,7 +746,7 @@ static bool tg_with_in_bps_limit(struct throtl_grp *tg, struct bio *bio,
jiffy_elapsed_rnd = roundup(jiffy_elapsed_rnd, throtl_slice);
- tmp = tg->bps[rw] * jiffy_elapsed_rnd;
+ tmp = tg_bps_limit(tg, rw) * jiffy_elapsed_rnd;
do_div(tmp, HZ);
bytes_allowed = tmp;
@@ -736,7 +758,7 @@ static bool tg_with_in_bps_limit(struct throtl_grp *tg, struct bio *bio,
/* Calc approx time to dispatch */
extra_bytes = tg->bytes_disp[rw] + bio->bi_iter.bi_size - bytes_allowed;
- jiffy_wait = div64_u64(extra_bytes * HZ, tg->bps[rw]);
+ jiffy_wait = div64_u64(extra_bytes * HZ, tg_bps_limit(tg, rw));
if (!jiffy_wait)
jiffy_wait = 1;
@@ -771,7 +793,8 @@ static bool tg_may_dispatch(struct throtl_grp *tg, struct bio *bio,
bio != throtl_peek_queued(&tg->service_queue.queued[rw]));
/* If tg->bps = -1, then BW is unlimited */
- if (tg->bps[rw] == U64_MAX && tg->iops[rw] == UINT_MAX) {
+ if (tg_bps_limit(tg, rw) == U64_MAX &&
+ tg_iops_limit(tg, rw) == UINT_MAX) {
if (wait)
*wait = 0;
return true;
@@ -1148,8 +1171,8 @@ static void tg_conf_updated(struct throtl_grp *tg)
throtl_log(&tg->service_queue,
"limit change rbps=%llu wbps=%llu riops=%u wiops=%u",
- tg->bps[READ], tg->bps[WRITE],
- tg->iops[READ], tg->iops[WRITE]);
+ tg_bps_limit(tg, READ), tg_bps_limit(tg, WRITE),
+ tg_iops_limit(tg, READ), tg_iops_limit(tg, WRITE));
/*
* Update has_rules[] flags for the updated tg's subtree. A tg is
@@ -1226,25 +1249,25 @@ static ssize_t tg_set_conf_uint(struct kernfs_open_file *of,
static struct cftype throtl_legacy_files[] = {
{
.name = "throttle.read_bps_device",
- .private = offsetof(struct throtl_grp, bps[READ]),
+ .private = offsetof(struct throtl_grp, bps[READ][LIMIT_MAX]),
.seq_show = tg_print_conf_u64,
.write = tg_set_conf_u64,
},
{
.name = "throttle.write_bps_device",
- .private = offsetof(struct throtl_grp, bps[WRITE]),
+ .private = offsetof(struct throtl_grp, bps[WRITE][LIMIT_MAX]),
.seq_show = tg_print_conf_u64,
.write = tg_set_conf_u64,
},
{
.name = "throttle.read_iops_device",
- .private = offsetof(struct throtl_grp, iops[READ]),
+ .private = offsetof(struct throtl_grp, iops[READ][LIMIT_MAX]),
.seq_show = tg_print_conf_uint,
.write = tg_set_conf_uint,
},
{
.name = "throttle.write_iops_device",
- .private = offsetof(struct throtl_grp, iops[WRITE]),
+ .private = offsetof(struct throtl_grp, iops[WRITE][LIMIT_MAX]),
.seq_show = tg_print_conf_uint,
.write = tg_set_conf_uint,
},
@@ -1270,18 +1293,25 @@ static u64 tg_prfill_max(struct seq_file *sf, struct blkg_policy_data *pd,
if (!dname)
return 0;
- if (tg->bps[READ] == U64_MAX && tg->bps[WRITE] == U64_MAX &&
- tg->iops[READ] == UINT_MAX && tg->iops[WRITE] == UINT_MAX)
+
+ if (tg->bps[READ][LIMIT_MAX] == U64_MAX &&
+ tg->bps[WRITE][LIMIT_MAX] == U64_MAX &&
+ tg->iops[READ][LIMIT_MAX] == UINT_MAX &&
+ tg->iops[WRITE][LIMIT_MAX] == UINT_MAX)
return 0;
- if (tg->bps[READ] != U64_MAX)
- snprintf(bufs[0], sizeof(bufs[0]), "%llu", tg->bps[READ]);
- if (tg->bps[WRITE] != U64_MAX)
- snprintf(bufs[1], sizeof(bufs[1]), "%llu", tg->bps[WRITE]);
- if (tg->iops[READ] != UINT_MAX)
- snprintf(bufs[2], sizeof(bufs[2]), "%u", tg->iops[READ]);
- if (tg->iops[WRITE] != UINT_MAX)
- snprintf(bufs[3], sizeof(bufs[3]), "%u", tg->iops[WRITE]);
+ if (tg->bps[READ][LIMIT_MAX] != U64_MAX)
+ snprintf(bufs[0], sizeof(bufs[0]), "%llu",
+ tg->bps[READ][LIMIT_MAX]);
+ if (tg->bps[WRITE][LIMIT_MAX] != U64_MAX)
+ snprintf(bufs[1], sizeof(bufs[1]), "%llu",
+ tg->bps[WRITE][LIMIT_MAX]);
+ if (tg->iops[READ][LIMIT_MAX] != UINT_MAX)
+ snprintf(bufs[2], sizeof(bufs[2]), "%u",
+ tg->iops[READ][LIMIT_MAX]);
+ if (tg->iops[WRITE][LIMIT_MAX] != UINT_MAX)
+ snprintf(bufs[3], sizeof(bufs[3]), "%u",
+ tg->iops[WRITE][LIMIT_MAX]);
seq_printf(sf, "%s rbps=%s wbps=%s riops=%s wiops=%s\n",
dname, bufs[0], bufs[1], bufs[2], bufs[3]);
@@ -1310,10 +1340,10 @@ static ssize_t tg_set_max(struct kernfs_open_file *of,
tg = blkg_to_tg(ctx.blkg);
- v[0] = tg->bps[READ];
- v[1] = tg->bps[WRITE];
- v[2] = tg->iops[READ];
- v[3] = tg->iops[WRITE];
+ v[0] = tg->bps[READ][LIMIT_MAX];
+ v[1] = tg->bps[WRITE][LIMIT_MAX];
+ v[2] = tg->iops[READ][LIMIT_MAX];
+ v[3] = tg->iops[WRITE][LIMIT_MAX];
while (true) {
char tok[27]; /* wiops=18446744073709551616 */
@@ -1350,10 +1380,10 @@ static ssize_t tg_set_max(struct kernfs_open_file *of,
goto out_finish;
}
- tg->bps[READ] = v[0];
- tg->bps[WRITE] = v[1];
- tg->iops[READ] = v[2];
- tg->iops[WRITE] = v[3];
+ tg->bps[READ][LIMIT_MAX] = v[0];
+ tg->bps[WRITE][LIMIT_MAX] = v[1];
+ tg->iops[READ][LIMIT_MAX] = v[2];
+ tg->iops[WRITE][LIMIT_MAX] = v[3];
tg_conf_updated(tg);
ret = 0;
@@ -1451,8 +1481,9 @@ bool blk_throtl_bio(struct request_queue *q, struct blkcg_gq *blkg,
/* out-of-limit, queue to @tg */
throtl_log(sq, "[%c] bio. bdisp=%llu sz=%u bps=%llu iodisp=%u iops=%u queued=%d/%d",
rw == READ ? 'R' : 'W',
- tg->bytes_disp[rw], bio->bi_iter.bi_size, tg->bps[rw],
- tg->io_disp[rw], tg->iops[rw],
+ tg->bytes_disp[rw], bio->bi_iter.bi_size,
+ tg_bps_limit(tg, rw),
+ tg->io_disp[rw], tg_iops_limit(tg, rw),
sq->nr_queued[READ], sq->nr_queued[WRITE]);
bio_associate_current(bio);
@@ -1563,6 +1594,7 @@ int blk_throtl_init(struct request_queue *q)
q->td = td;
td->queue = q;
+ td->limit_valid[LIMIT_MAX] = true;
/* activate policy */
ret = blkcg_activate_policy(q, &blkcg_policy_throtl);
if (ret)
--
2.9.3
next prev parent reply other threads:[~2016-12-15 20:33 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-15 20:32 [PATCH V5 00/17] blk-throttle: add .low limit Shaohua Li
2016-12-15 20:32 ` [PATCH V5 01/17] blk-throttle: use U64_MAX/UINT_MAX to replace -1 Shaohua Li
2016-12-15 20:32 ` Shaohua Li [this message]
2016-12-15 20:32 ` [PATCH V5 03/17] blk-throttle: add .low interface Shaohua Li
2017-01-09 16:35 ` Tejun Heo
2016-12-15 20:32 ` [PATCH V5 04/17] blk-throttle: configure bps/iops limit for cgroup in low limit Shaohua Li
2017-01-09 17:35 ` Tejun Heo
2016-12-15 20:32 ` [PATCH V5 05/17] blk-throttle: add upgrade logic for LIMIT_LOW state Shaohua Li
2017-01-09 18:40 ` Tejun Heo
2017-01-09 19:46 ` Tejun Heo
2016-12-15 20:32 ` [PATCH V5 06/17] blk-throttle: add downgrade logic Shaohua Li
2016-12-15 20:32 ` [PATCH V5 07/17] blk-throttle: make sure expire time isn't too big Shaohua Li
2017-01-09 19:54 ` Tejun Heo
2016-12-15 20:32 ` [PATCH V5 08/17] blk-throttle: make throtl_slice tunable Shaohua Li
2017-01-09 20:08 ` Tejun Heo
2016-12-15 20:33 ` [PATCH V5 09/17] blk-throttle: detect completed idle cgroup Shaohua Li
2017-01-09 20:13 ` Tejun Heo
2016-12-15 20:33 ` [PATCH V5 10/17] blk-throttle: make bandwidth change smooth Shaohua Li
2017-01-09 20:28 ` Tejun Heo
2016-12-15 20:33 ` [PATCH V5 11/17] blk-throttle: add a simple idle detection Shaohua Li
2017-01-09 20:56 ` Tejun Heo
2016-12-15 20:33 ` [PATCH V5 12/17] blk-throttle: add interface to configure idle time threshold Shaohua Li
2017-01-09 20:58 ` Tejun Heo
2016-12-15 20:33 ` [PATCH V5 13/17] blk-throttle: ignore idle cgroup limit Shaohua Li
2017-01-09 21:01 ` Tejun Heo
2016-12-15 20:33 ` [PATCH V5 14/17] blk-throttle: add interface for per-cgroup target latency Shaohua Li
2017-01-09 21:14 ` Tejun Heo
2016-12-15 20:33 ` [PATCH V5 15/17] block: track request size in blk_issue_stat Shaohua Li
2016-12-16 2:01 ` kbuild test robot
2017-01-09 21:17 ` Tejun Heo
2016-12-15 20:33 ` [PATCH V5 16/17] blk-throttle: add a mechanism to estimate IO latency Shaohua Li
2017-01-09 21:39 ` Tejun Heo
2016-12-15 20:33 ` [PATCH V5 17/17] blk-throttle: add latency target support Shaohua Li
2017-01-09 21:46 ` [PATCH V5 00/17] blk-throttle: add .low limit Tejun Heo
2017-01-09 22:27 ` Shaohua Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d8473b6b74c2390f6e7cc8eda03cecedfa532226.1481833017.git.shli@fb.com \
--to=shli@fb.com \
--cc=axboe@fb.com \
--cc=kernel-team@fb.com \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tj@kernel.org \
--cc=vgoyal@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.