From: Arno Wagner <arno@wagner.name>
To: dm-crypt@saout.de
Subject: Re: [dm-crypt] How to debug the start up process ?
Date: Sat, 12 Sep 2020 04:31:28 +0200 [thread overview]
Message-ID: <20200912023128.GA4868@tansi.org> (raw)
In-Reply-To: <47633efe.6b.1747e5a83b9.Coremail.su_cj81@163.com>
While I have no idea what an uInitrd is, Item 9.3 of the FAQ
may provide some help on how to get your own code in there:
https://gitlab.com/cryptsetup/cryptsetup/-/wikis/FrequentlyAskedQuestions
Regards,
Arno
On Fri, Sep 11, 2020 at 20:08:15 CEST, su wrote:
> I have an arm64 board installed with armbian linux OS. The board has an
> internal emmc and it can boot from an external usb drive too.
> Now both the usb drive and the emmc has the same OS and they can boot
> respectively . As far as the root file system is concerned , the one at
> usb drive and the one at emmc are exactly the same.
> Now I would like to luks the root file system at the emmc. The
> building process of a new uInitrd is quite smooth . The problem is :
> once the new uInitrd takes effect , the kernel hang without any warning
> . Please refer to the following kernel printout about the boot process
> . I would like to know how to debug it ? Thankyou !
> =======================================================================
> =========
> Starting kernel ...
> uboot time: 6464083 us
> [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
> [ 0.000000] Linux version 5.5.0-rc6-aml-s9xxx (root@vbox) (gcc
> version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03
> (arm-rel-8.36))) #rc1.038 SMP PREEMPT Thu Feb 6 10:21:51 MSK 2020
> [ 0.000000] Machine model: Khadas VIM
> [ 0.000000] efi: Getting EFI parameters from FDT:
> [ 0.000000] efi: UEFI not found.
> [ 0.000000] Reserved memory: created CMA memory pool at
> 0x0000000063000000, size 256 MiB
> [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible
> id shared-dma-pool
> [ 0.000000] psci: probing for conduit method from DT.
> [ 0.000000] psci: PSCIv0.2 detected in firmware.
> [ 0.000000] psci: Using standard PSCI v0.2 function IDs
> [ 0.000000] psci: Trusted OS migration not required
> [ 0.000000] percpu: Embedded 22 pages/cpu s50392 r8192 d31528 u90112
> [ 0.000000] Detected VIPT I-cache on CPU0
> [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages:
> 470336
> [ 0.000000] Kernel command line: root=/dev/mapper/emmcroot
> rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0
> no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes
> net.ifnames=0
> [ 0.000000] Dentry cache hash table entries: 262144 (order: 9,
> 2097152 bytes, linear)
> [ 0.000000] Inode-cache hash table entries: 131072 (order: 8,
> 1048576 bytes, linear)
> [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
> [ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000]
> (64MB)
> [ 0.000000] Memory: 1505484K/1911808K available (14460K kernel code,
> 1434K rwdata, 5884K rodata, 960K init, 927K bss, 144180K reserved,
> 262144K cma-reserved)
> [ 0.000000] random: get_random_u64 called from
> cache_random_seq_create+0x7c/0x150 with crng_init=0
> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4,
> Nodes=1
> [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
> [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to
> nr_cpu_ids=4.
> [ 0.000000] Tasks RCU enabled.
> [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay
> is 25 jiffies.
> [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16,
> nr_cpu_ids=4
> [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
> [ 0.000000] GIC: Using split EOI/Deactivate mode
> [ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
> [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
> [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff
> max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
> [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps
> every 4398046511097ns
> [ 0.000354] Console: colour dummy device 80x25
> [ 0.000649] printk: console [tty0] enabled
> [ 0.000686] Calibrating delay loop (skipped), value calculated using
> timer frequency.. 48.00 BogoMIPS (lpj=96000)
> [ 0.000706] pid_max: default: 32768 minimum: 301
> [ 0.000825] LSM: Security Framework initializing
> [ 0.000875] SELinux: Initializing.
> [ 0.000952] *** VALIDATE SELinux ***
> [ 0.001012] Mount-cache hash table entries: 4096 (order: 3, 32768
> bytes, linear)
> [ 0.001035] Mountpoint-cache hash table entries: 4096 (order: 3,
> 32768 bytes, linear)
> [ 0.001093] *** VALIDATE tmpfs ***
> [ 0.001462] *** VALIDATE proc ***
> [ 0.001666] *** VALIDATE cgroup1 ***
> [ 0.001680] *** VALIDATE cgroup2 ***
> [ 0.024005] ASID allocator initialised with 32768 entries
> [ 0.031990] rcu: Hierarchical SRCU implementation.
> [ 0.042021] EFI services will not be available.
> [ 0.048042] smp: Bringing up secondary CPUs ...
> [ 0.080261] Detected VIPT I-cache on CPU1
> [ 0.080309] CPU1: Booted secondary processor 0x0000000001
> [0x410fd034]
> [ 0.112298] Detected VIPT I-cache on CPU2
> [ 0.112340] CPU2: Booted secondary processor 0x0000000002
> [0x410fd034]
> [ 0.144341] Detected VIPT I-cache on CPU3
> [ 0.144382] CPU3: Booted secondary processor 0x0000000003
> [0x410fd034]
> [ 0.144456] smp: Brought up 1 node, 4 CPUs
> [ 0.144520] SMP: Total of 4 processors activated.
> [ 0.144531] CPU features: detected: 32-bit EL0 Support
> [ 0.144543] CPU features: detected: CRC32 instructions
> [ 0.144843] CPU: All CPU(s) started at EL2
> [ 0.144865] alternatives: patching kernel code
> [ 0.145847] devtmpfs: initialized
> [ 0.150960] clocksource: jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 7645041785100000 ns
> [ 0.150997] futex hash table entries: 1024 (order: 4, 65536 bytes,
> linear)
> [ 0.157625] xor: measuring software checksum speed
> [ 0.196327] 8regs : 2375.000 MB/sec
> [ 0.236359] 32regs : 2724.000 MB/sec
> [ 0.276398] arm64_neon: 2406.000 MB/sec
> [ 0.276408] xor: using function: 32regs (2724.000 MB/sec)
> [ 0.276458] pinctrl core: initialized pinctrl subsystem
> [ 0.277059] thermal_sys: Registered thermal governor 'step_wise'
> [ 0.277227] DMI not present or invalid.
> [ 0.277554] NET: Registered protocol family 16
> [ 0.281201] DMA: preallocated 256 KiB pool for atomic allocations
> [ 0.281244] audit: initializing netlink subsys (disabled)
> [ 0.281431] audit: type=2000 audit(0.280:1): state=initialized
> audit_enabled=0 res=1
> [ 0.282464] cpuidle: using governor ladder
> [ 0.282504] cpuidle: using governor menu
> [ 0.282847] hw-breakpoint: found 6 breakpoint and 4 watchpoint
> registers.
> [ 0.283560] Serial: AMBA PL011 UART driver
> [ 0.297999] HugeTLB registered 1.00 GiB page size, pre-allocated 0
> pages
> [ 0.298024] HugeTLB registered 32.0 MiB page size, pre-allocated 0
> pages
> [ 0.298037] HugeTLB registered 2.00 MiB page size, pre-allocated 0
> pages
> [ 0.298049] HugeTLB registered 64.0 KiB page size, pre-allocated 0
> pages
> [ 0.301534] cryptd: max_cpu_qlen set to 1000
> [ 0.376588] raid6: neonx8 gen() 1616 MB/s
> [ 0.444655] raid6: neonx8 xor() 1490 MB/s
> [ 0.512704] raid6: neonx4 gen() 1566 MB/s
> [ 0.580773] raid6: neonx4 xor() 1471 MB/s
> [ 0.648832] raid6: neonx2 gen() 1200 MB/s
> [ 0.716878] raid6: neonx2 xor() 1216 MB/s
> [ 0.785010] raid6: neonx1 gen() 787 MB/s
> [ 0.853030] raid6: neonx1 xor() 915 MB/s
> [ 0.921090] raid6: int64x8 gen() 1195 MB/s
> [ 0.989102] raid6: int64x8 xor() 769 MB/s
> [ 1.057142] raid6: int64x4 gen() 1029 MB/s
> [ 1.125220] raid6: int64x4 xor() 752 MB/s
> [ 1.193296] raid6: int64x2 gen() 728 MB/s
> [ 1.261308] raid6: int64x2 xor() 615 MB/s
> [ 1.329413] raid6: int64x1 gen() 486 MB/s
> [ 1.397413] raid6: int64x1 xor() 468 MB/s
> [ 1.397423] raid6: using algorithm neonx8 gen() 1616 MB/s
> [ 1.397434] raid6: .... xor() 1490 MB/s, rmw enabled
> [ 1.397443] raid6: using neon recovery algorithm
> [ 1.397707] ACPI: Interpreter disabled.
> [ 1.398866] iommu: Default domain type: Translated
> [ 1.399118] vgaarb: loaded
> [ 1.399648] SCSI subsystem initialized
> [ 1.400022] usbcore: registered new interface driver usbfs
> [ 1.400066] usbcore: registered new interface driver hub
> [ 1.400131] usbcore: registered new device driver usb
> [ 1.400530] pps_core: LinuxPPS API ver. 1 registered
> [ 1.400543] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
> Rodolfo Giometti <giometti@linux.it>
> [ 1.400566] PTP clock support registered
> [ 1.400595] EDAC MC: Ver: 3.0.0
> [ 1.401142] FPGA manager framework
> [ 1.401244] Advanced Linux Sound Architecture Driver Initialized.
> [ 1.401692] NetLabel: Initializing
> [ 1.401705] NetLabel: domain hash size = 128
> [ 1.401714] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
> [ 1.401772] NetLabel: unlabeled traffic allowed by default
> [ 1.402227] clocksource: Switched to clocksource arch_sys_counter
> [ 1.402250] *** VALIDATE bpf ***
> [ 1.402488] VFS: Disk quotas dquot_6.6.0
> [ 1.402546] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
> bytes)
> [ 1.402655] FS-Cache: Loaded
> [ 1.402666] *** VALIDATE ramfs ***
> [ 1.402687] *** VALIDATE hugetlbfs ***
> [ 1.403044] pnp: PnP ACPI: disabled
> [ 1.407961] NET: Registered protocol family 2
> [ 1.408425] tcp_listen_portaddr_hash hash table entries: 1024
> (order: 2, 16384 bytes, linear)
> [ 1.408473] TCP established hash table entries: 16384 (order: 5,
> 131072 bytes, linear)
> [ 1.408589] TCP bind hash table entries: 16384 (order: 6, 262144
> bytes, linear)
> [ 1.408795] TCP: Hash tables configured (established 16384 bind
> 16384)
> [ 1.408926] UDP hash table entries: 1024 (order: 3, 32768 bytes,
> linear)
> [ 1.408979] UDP-Lite hash table entries: 1024 (order: 3, 32768
> bytes, linear)
> [ 1.409178] NET: Registered protocol family 1
> [ 1.409614] RPC: Registered named UNIX socket transport module.
> [ 1.409633] RPC: Registered udp transport module.
> [ 1.409643] RPC: Registered tcp transport module.
> [ 1.409652] RPC: Registered tcp NFSv4.1 backchannel transport
> module.
> [ 1.409668] NET: Registered protocol family 44
> [ 1.409687] PCI: CLS 0 bytes, default 64
> [ 1.409862] Trying to unpack rootfs image as initramfs...
> [ 1.593595] Freeing initrd memory: 14372K
> [ 1.594350] hw perfevents: enabled with armv8_cortex_a53 PMU driver,
> 7 counters available
> [ 1.736370] Initialise system trusted keyrings
> [ 1.736574] workingset: timestamp_bits=46 max_order=19
> bucket_order=0
> [ 1.741653] zbud: loaded
> [ 1.742911] squashfs: version 4.0 (2009/01/31) Phillip Lougher
> [ 1.743191] FS-Cache: Netfs 'nfs' registered for caching
> [ 1.743691] NFS: Registering the id_resolver key type
> [ 1.743726] Key type id_resolver registered
> [ 1.743737] Key type id_legacy registered
> [ 1.743752] nfs4filelayout_init: NFSv4 File Layout Driver
> Registering...
> [ 1.743764] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> [ 1.744808] FS-Cache: Netfs 'cifs' registered for caching
> [ 1.745116] Key type cifs.spnego registered
> [ 1.745136] Key type cifs.idmap registered
> [ 1.745155] ntfs: driver 2.1.32 [Flags: R/W].
> [ 1.745709] JFS: nTxBlock = 8192, nTxLock = 65536
> [ 1.749560] SGI XFS with ACLs, security attributes, realtime, quota,
> no debug enabled
> [ 1.750925] *** VALIDATE xfs ***
> [ 1.751203] ocfs2: Registered cluster interface o2cb
> [ 1.751399] OCFS2 User DLM kernel interface loaded
> [ 1.752652] *** VALIDATE gfs2 ***
> [ 1.752907] gfs2: GFS2 installed
> [ 1.753805] aufs 5.5-20200203
> [ 1.771774] Key type asymmetric registered
> [ 1.771797] Asymmetric key parser 'x509' registered
> [ 1.771808] Asymmetric key parser 'pkcs8' registered
> [ 1.771869] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 246)
> [ 1.772030] io scheduler mq-deadline registered
> [ 1.772044] io scheduler kyber registered
> [ 1.772221] io scheduler bfq registered
> [ 1.785287] soc soc0: Amlogic Meson GXL (S905X) Revision 21:b (82:2)
> Detected
> [ 1.788917] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
> [ 1.790679] Serial: AMBA driver
> [ 1.791037] c11084c0.serial: ttyAML6 at MMIO 0xc11084c0 (irq = 10,
> base_baud = 1500000) is a meson_uart
> [ 1.791191] serial serial0: tty port ttyAML6 registered
> [ 1.791401] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 15,
> base_baud = 1500000) is a meson_uart
> [ 2.762384] printk: console [ttyAML0] enabled
> [ 2.767193] c81004e0.serial: ttyAML2 at MMIO 0xc81004e0 (irq = 16,
> base_baud = 1500000) is a meson_uart
> [ 2.787238] brd: module loaded
> [ 2.795004] loop: module loaded
> [ 2.797395] libphy: Fixed MDIO Bus: probed
> [ 2.798068] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not
> found
> [ 2.803175] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
> [ 2.809364] meson8b-dwmac c9410000.ethernet: PTP uses main clock
> [ 2.815265] meson8b-dwmac c9410000.ethernet: no reset control found
> [ 2.821893] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys
> ID: 0x37
> [ 2.828539] meson8b-dwmac c9410000.ethernet: DWMAC1000
> [ 2.833685] meson8b-dwmac c9410000.ethernet: DMA HW capability
> register supported
> [ 2.841100] meson8b-dwmac c9410000.ethernet: RX Checksum Offload
> Engine supported
> [ 2.848517] meson8b-dwmac c9410000.ethernet: COE Type 2
> [ 2.853689] meson8b-dwmac c9410000.ethernet: TX Checksum insertion
> supported
> [ 2.860676] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan
> supported
> [ 2.867087] meson8b-dwmac c9410000.ethernet: Normal descriptors
> [ 2.872925] meson8b-dwmac c9410000.ethernet: Ring mode enabled
> [ 2.878704] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation
> via HW Watchdog Timer
> [ 2.886805] libphy: stmmac: probed
> [ 2.891308] VFIO - User Level meta-driver version: 0.3
> [ 2.896572] dwc3 c9000000.dwc3: Failed to get clk 'ref': -2
> [ 2.901486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver
> [ 2.907108] ehci-pci: EHCI PCI platform driver
> [ 2.911535] ehci-platform: EHCI generic platform driver
> [ 2.916865] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 2.922793] ohci-pci: OHCI PCI platform driver
> [ 2.927218] ohci-platform: OHCI generic platform driver
> [ 2.932969] usbcore: registered new interface driver usb-storage
> [ 2.938516] mousedev: PS/2 mouse device common for all mice
> [ 2.944488] i2c /dev entries driver
> [ 2.951446] sdhci: Secure Digital Host Controller Interface driver
> [ 2.953388] sdhci: Copyright(c) Pierre Ossman
> [ 2.957752] Synopsys Designware Multimedia Card Interface Driver
> [ 2.965013] meson-gx-mmc d0072000.mmc: Got CD GPIO
> [ 2.995411] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
> [ 3.022285] sdhci-pltfm: SDHCI platform and OF driver helper
> [ 3.023328] ledtrig-cpu: registered to indicate activity on CPUs
> [ 3.029078] meson-sm: secure-monitor enabled
> [ 3.033161] gxl-crypto c883e000.crypto: will run requests pump with
> realtime priority
> [ 3.040454] gxl-crypto c883e000.crypto: will run requests pump with
> realtime priority
> [ 3.059507] hid: raw HID events driver (C) Jiri Kosina
> [ 3.059725] usbcore: registered new interface driver usbhid
> [ 3.064566] usbhid: USB HID core driver
> [ 3.068681] platform-mhu c883c404.mailbox: Platform MHU Mailbox
> registered
> [BL31]: tee size: 0
> [ 3.085147] NET: Registered protocol family 17
> [ 3.085372] Key type dns_resolver registered
> [ 3.088792] registered taskstats version 1
> [ 3.092274] Loading compiled-in X.509 certificates
> [ 3.097112] zswap: loaded using pool lzo/zbud
> [ 3.101557] Key type ._fscrypt registered
> [ 3.105284] Key type .fscrypt registered
> [ 3.110182] Btrfs loaded, crc32c=crc32c-generic
> [ 3.153371] mmc1: new HS200 MMC card at address 0001
> [ 3.158177] mmcblk1: mmc1:0001 DG4008 7.28 GiB
> [ 3.158530] mmcblk1boot0: mmc1:0001 DG4008 partition 1 4.00 MiB
> [ 3.163453] mmcblk1boot1: mmc1:0001 DG4008 partition 2 4.00 MiB
> [ 3.169159] mmcblk1rpmb: mmc1:0001 DG4008 partition 3 4.00 MiB,
> chardev (243:0)
> [ 3.186090] mmcblk1: p1 p2
> [ 3.258170] Key type encrypted registered
> [ 3.275342] meson-drm d0100000.vpu: Queued 2 outputs on vpu
> [ 3.275667] [drm] Supports vblank timestamp caching Rev 2
> (21.10.2013).
> [ 3.281901] [drm] No driver support for vblank timestamp query.
> [ 3.287807] meson-drm d0100000.vpu: CVBS Output connector not
> available
> [ 3.322281] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX
> controller v2.01a with HDCP (meson_dw_hdmi_phy)
> [ 3.326904] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare
> HDMI I2C bus driver
> [ 3.334940] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops
> meson_dw_hdmi_ops)
> [ 3.342185] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu
> on minor 0
> [ 3.348936] [drm] Cannot find any crtc or sizes
> [ 3.354036] libphy: mdio_mux: probed
> [ 3.357012] [drm] Cannot find any crtc or sizes
> [ 3.363181] libphy: mdio_mux: probed
> [ 3.365273] phy phy-d0078080.phy.2: unsupported PHY mode 5
> [ 3.372398] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
> [ 3.375815] xhci-hcd xhci-hcd.0.auto: new USB bus registered,
> assigned bus number 1
> [ 3.383517] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci
> version 0x100 quirks 0x0000000002010010
> [ 3.392746] xhci-hcd xhci-hcd.0.auto: irq 42, io mem 0xc9000000
> [ 3.398832] usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0002, bcdDevice= 5.05
> [ 3.406770] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 3.413921] usb usb1: Product: xHCI Host Controller
> [ 3.418750] usb usb1: Manufacturer: Linux 5.5.0-rc6-aml-s9xxx
> xhci-hcd
> [ 3.425218] usb usb1: SerialNumber: xhci-hcd.0.auto
> [ 3.430508] hub 1-0:1.0: USB hub found
> [ 3.433770] hub 1-0:1.0: 2 ports detected
> [ 3.437993] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
> [ 3.443174] xhci-hcd xhci-hcd.0.auto: new USB bus registered,
> assigned bus number 2
> [ 3.450759] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0
> SuperSpeed
> [ 3.457261] usb usb2: We don't know the algorithms for LPM for this
> host, disabling LPM.
> [ 3.465323] usb usb2: New USB device found, idVendor=1d6b,
> idProduct=0003, bcdDevice= 5.05
> [ 3.473434] usb usb2: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 3.480591] usb usb2: Product: xHCI Host Controller
> [ 3.485420] usb usb2: Manufacturer: Linux 5.5.0-rc6-aml-s9xxx
> xhci-hcd
> [ 3.491889] usb usb2: SerialNumber: xhci-hcd.0.auto
> [ 3.497131] hub 2-0:1.0: USB hub found
> [ 3.500460] hub 2-0:1.0: config failed, hub doesn't have any ports!
> (err -19)
> [ 3.509226] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq
> [ 3.539184] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
> domain-0 init dvfs: 4
> [ 3.552456] gx-sound-card sound: snd-soc-dummy-dai <->
> c1105400.bus:audio-controller-0 mapping ok
> [ 3.556260] gx-sound-card sound: i2s-hifi <->
> c1105400.bus:audio-controller-2 mapping ok
> [ 3.563829] gx-sound-card sound: ASoC: no DMI vendor name!
> [ 3.569743] printk: console [netcon0] enabled
> [ 3.573472] netconsole: network logging started
> [ 3.577943] hctosys: unable to open rtc device (rtc0)
> [ 3.583224] ALSA device list:
> [ 3.585868] #0: AMLGX
> [ 3.588639] Freeing unused kernel memory: 960K
> [ 3.592746] Run /init as init process
> [ 3.770276] usb 1-2: new high-speed USB device number 2 using
> xhci-hcd
> [ 3.792394] usb 1-2: New USB device found, idVendor=0951,
> idProduct=1665, bcdDevice= 1.00
> [ 3.795038] usb 1-2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [ 3.802272] usb 1-2: Product: DataTraveler 2.0
> [ 3.806449] usb 1-2: Manufacturer: Kingston
> [ 3.810571] usb 1-2: SerialNumber: 001CC05FE92CFD307932248D
> [ 3.817380] usb-storage 1-2:1.0: USB Mass Storage device detected
> [ 3.826648] scsi host0: usb-storage 1-2:1.0
> [ 3.864900] usbcore: registered new interface driver uas
> [ 3.953217] lima d00c0000.gpu: IRQ ppmmu3 not found
> [ 3.953266] lima d00c0000.gpu: IRQ ppmmu4 not found
> [ 3.957602] lima d00c0000.gpu: IRQ ppmmu5 not found
> [ 3.962476] lima d00c0000.gpu: IRQ ppmmu6 not found
> [ 3.967326] lima d00c0000.gpu: IRQ ppmmu7 not found
> [ 3.972204] lima d00c0000.gpu: gp - mali450 version major 0 minor 0
> [ 3.978708] lima d00c0000.gpu: pp0 - mali450 version major 0 minor 0
> [ 3.984789] lima d00c0000.gpu: pp1 - mali450 version major 0 minor 0
> [ 3.991018] lima d00c0000.gpu: pp2 - mali450 version major 0 minor 0
> [ 3.997266] lima d00c0000.gpu: IRQ pp3 not found
> [ 4.001781] lima d00c0000.gpu: IRQ pp4 not found
> [ 4.006384] lima d00c0000.gpu: IRQ pp5 not found
> [ 4.010904] lima d00c0000.gpu: IRQ pp6 not found
> [ 4.015518] lima d00c0000.gpu: IRQ pp7 not found
> [ 4.020058] lima d00c0000.gpu: l2 cache 8K, 4-way, 64byte cache
> line, 128bit external bus
> [ 4.028167] lima d00c0000.gpu: l2 cache 64K, 4-way, 64byte cache
> line, 128bit external bus
> [ 4.038258] lima d00c0000.gpu: bus rate = 166666667
> [ 4.041759] lima d00c0000.gpu: mod rate = 744000000
> [ 4.046455] [drm] Initialized lima 1.0.0 20190217 for d00c0000.gpu
> on minor 1
> [ 4.066095] random: fast init done
> [ 4.854967] scsi 0:0:0:0: Direct-Access Kingston DataTraveler
> 2.0 1.00 PQ: 0 ANSI: 4
> [ 4.860464] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 4.861302] sd 0:0:0:0: [sda] 30233588 512-byte logical blocks:
> (15.5 GB/14.4 GiB)
> [ 4.870564] sd 0:0:0:0: [sda] Write Protect is off
> [ 4.875306] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
> enabled, doesn't support DPO or FUA
> [ 4.911570] sda: sda1 sda2
> [ 4.914265] sd 0:0:0:0: [sda] Attached SCSI removable disk
> [ 5.453031] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16)
> initialised: dm-devel@redhat.com
> _______________________________________________
> dm-crypt mailing list
> dm-crypt@saout.de
> https://www.saout.de/mailman/listinfo/dm-crypt
--
Arno Wagner, Dr. sc. techn., Dipl. Inform., Email: arno@wagner.name
GnuPG: ID: CB5D9718 FP: 12D6 C03B 1B30 33BB 13CF B774 E35C 5FA1 CB5D 9718
----
A good decision is based on knowledge and not on numbers. -- Plato
If it's in the news, don't worry about it. The very definition of
"news" is "something that hardly ever happens." -- Bruce Schneier
prev parent reply other threads:[~2020-09-12 2:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-11 18:08 [dm-crypt] How to debug the start up process ? su
2020-09-11 22:25 ` su
2020-09-12 2:31 ` Arno Wagner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200912023128.GA4868@tansi.org \
--to=arno@wagner.name \
--cc=dm-crypt@saout.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).