From: Benjamin Marzinski <bmarzins@redhat.com>
To: mwilck@suse.com
Cc: dm-devel@redhat.com
Subject: Re: [dm-devel] [PATCH 7/9] libmultipath: print.h: move macros to print.c
Date: Wed, 28 Jul 2021 21:36:55 -0500 [thread overview]
Message-ID: <20210729023655.GO3087@octiron.msp.redhat.com> (raw)
In-Reply-To: <20210715105223.30463-8-mwilck@suse.com>
On Thu, Jul 15, 2021 at 12:52:21PM +0200, mwilck@suse.com wrote:
> From: Martin Wilck <mwilck@suse.com>
>
> Move all macros to print.c that aren't used in other source files.
>
> Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
> ---
> libmultipath/print.c | 66 +++++++++++++++++++++++++++++++++++++++++
> libmultipath/print.h | 70 +-------------------------------------------
> 2 files changed, 67 insertions(+), 69 deletions(-)
>
> diff --git a/libmultipath/print.c b/libmultipath/print.c
> index 5b86483..6a5c465 100644
> --- a/libmultipath/print.c
> +++ b/libmultipath/print.c
> @@ -34,6 +34,72 @@
> #include "foreign.h"
> #include "strbuf.h"
>
> +#define PRINT_PATH_LONG "%w %i %d %D %p %t %T %s %o"
> +#define PRINT_PATH_INDENT "%i %d %D %t %T %o"
> +#define PRINT_MAP_PROPS "size=%S features='%f' hwhandler='%h' wp=%r"
> +#define PRINT_PG_INDENT "policy='%s' prio=%p status=%t"
> +
> +#define PRINT_JSON_MULTIPLIER 5
> +#define PRINT_JSON_MAJOR_VERSION 0
> +#define PRINT_JSON_MINOR_VERSION 1
> +#define PRINT_JSON_START_VERSION " \"major_version\": %d,\n" \
> + " \"minor_version\": %d,\n"
> +#define PRINT_JSON_START_ELEM "{\n"
> +#define PRINT_JSON_START_MAP " \"map\":"
> +#define PRINT_JSON_START_MAPS "\"maps\": ["
> +#define PRINT_JSON_START_PATHS "\"paths\": ["
> +#define PRINT_JSON_START_GROUPS "\"path_groups\": ["
> +#define PRINT_JSON_END_ELEM "},"
> +#define PRINT_JSON_END_LAST_ELEM "}"
> +#define PRINT_JSON_END_LAST "}\n"
> +#define PRINT_JSON_END_ARRAY "]\n"
> +#define PRINT_JSON_INDENT_N 3
> +#define PRINT_JSON_MAP "{\n" \
> + " \"name\" : \"%n\",\n" \
> + " \"uuid\" : \"%w\",\n" \
> + " \"sysfs\" : \"%d\",\n" \
> + " \"failback\" : \"%F\",\n" \
> + " \"queueing\" : \"%Q\",\n" \
> + " \"paths\" : %N,\n" \
> + " \"write_prot\" : \"%r\",\n" \
> + " \"dm_st\" : \"%t\",\n" \
> + " \"features\" : \"%f\",\n" \
> + " \"hwhandler\" : \"%h\",\n" \
> + " \"action\" : \"%A\",\n" \
> + " \"path_faults\" : %0,\n" \
> + " \"vend\" : \"%v\",\n" \
> + " \"prod\" : \"%p\",\n" \
> + " \"rev\" : \"%e\",\n" \
> + " \"switch_grp\" : %1,\n" \
> + " \"map_loads\" : %2,\n" \
> + " \"total_q_time\" : %3,\n" \
> + " \"q_timeouts\" : %4,"
> +
> +#define PRINT_JSON_GROUP "{\n" \
> + " \"selector\" : \"%s\",\n" \
> + " \"pri\" : %p,\n" \
> + " \"dm_st\" : \"%t\",\n" \
> + " \"marginal_st\" : \"%M\","
> +
> +#define PRINT_JSON_GROUP_NUM " \"group\" : %d,\n"
> +
> +#define PRINT_JSON_PATH "{\n" \
> + " \"dev\" : \"%d\",\n"\
> + " \"dev_t\" : \"%D\",\n" \
> + " \"dm_st\" : \"%t\",\n" \
> + " \"dev_st\" : \"%o\",\n" \
> + " \"chk_st\" : \"%T\",\n" \
> + " \"checker\" : \"%c\",\n" \
> + " \"pri\" : %p,\n" \
> + " \"host_wwnn\" : \"%N\",\n" \
> + " \"target_wwnn\" : \"%n\",\n" \
> + " \"host_wwpn\" : \"%R\",\n" \
> + " \"target_wwpn\" : \"%r\",\n" \
> + " \"host_adapter\" : \"%a\",\n" \
> + " \"marginal_st\" : \"%M\""
> +
> +#define PROGRESS_LEN 10
> +
> #define MAX(x,y) (((x) > (y)) ? (x) : (y))
> #define MIN(x,y) (((x) > (y)) ? (y) : (x))
> /*
> diff --git a/libmultipath/print.h b/libmultipath/print.h
> index b922812..c6674a5 100644
> --- a/libmultipath/print.h
> +++ b/libmultipath/print.h
> @@ -2,80 +2,12 @@
> #define _PRINT_H
> #include "dm-generic.h"
>
> -struct strbuf;
> -
> -#define PRINT_PATH_LONG "%w %i %d %D %p %t %T %s %o"
> -#define PRINT_PATH_INDENT "%i %d %D %t %T %o"
> #define PRINT_PATH_CHECKER "%i %d %D %p %t %T %o %C"
> #define PRINT_MAP_STATUS "%n %F %Q %N %t %r"
> #define PRINT_MAP_STATS "%n %0 %1 %2 %3 %4"
> #define PRINT_MAP_NAMES "%n %d %w"
> -#define PRINT_MAP_PROPS "size=%S features='%f' hwhandler='%h' wp=%r"
> -#define PRINT_PG_INDENT "policy='%s' prio=%p status=%t"
> -
> -#define PRINT_JSON_MULTIPLIER 5
> -#define PRINT_JSON_MAJOR_VERSION 0
> -#define PRINT_JSON_MINOR_VERSION 1
> -#define PRINT_JSON_START_VERSION " \"major_version\": %d,\n" \
> - " \"minor_version\": %d,\n"
> -#define PRINT_JSON_START_ELEM "{\n"
> -#define PRINT_JSON_START_MAP " \"map\":"
> -#define PRINT_JSON_START_MAPS "\"maps\": ["
> -#define PRINT_JSON_START_PATHS "\"paths\": ["
> -#define PRINT_JSON_START_GROUPS "\"path_groups\": ["
> -#define PRINT_JSON_END_ELEM "},"
> -#define PRINT_JSON_END_LAST_ELEM "}"
> -#define PRINT_JSON_END_LAST "}\n"
> -#define PRINT_JSON_END_ARRAY "]\n"
> -#define PRINT_JSON_INDENT_N 3
> -#define PRINT_JSON_MAP "{\n" \
> - " \"name\" : \"%n\",\n" \
> - " \"uuid\" : \"%w\",\n" \
> - " \"sysfs\" : \"%d\",\n" \
> - " \"failback\" : \"%F\",\n" \
> - " \"queueing\" : \"%Q\",\n" \
> - " \"paths\" : %N,\n" \
> - " \"write_prot\" : \"%r\",\n" \
> - " \"dm_st\" : \"%t\",\n" \
> - " \"features\" : \"%f\",\n" \
> - " \"hwhandler\" : \"%h\",\n" \
> - " \"action\" : \"%A\",\n" \
> - " \"path_faults\" : %0,\n" \
> - " \"vend\" : \"%v\",\n" \
> - " \"prod\" : \"%p\",\n" \
> - " \"rev\" : \"%e\",\n" \
> - " \"switch_grp\" : %1,\n" \
> - " \"map_loads\" : %2,\n" \
> - " \"total_q_time\" : %3,\n" \
> - " \"q_timeouts\" : %4,"
> -
> -#define PRINT_JSON_GROUP "{\n" \
> - " \"selector\" : \"%s\",\n" \
> - " \"pri\" : %p,\n" \
> - " \"dm_st\" : \"%t\",\n" \
> - " \"marginal_st\" : \"%M\","
>
> -#define PRINT_JSON_GROUP_NUM " \"group\" : %d,\n"
> -
> -#define PRINT_JSON_PATH "{\n" \
> - " \"dev\" : \"%d\",\n"\
> - " \"dev_t\" : \"%D\",\n" \
> - " \"dm_st\" : \"%t\",\n" \
> - " \"dev_st\" : \"%o\",\n" \
> - " \"chk_st\" : \"%T\",\n" \
> - " \"checker\" : \"%c\",\n" \
> - " \"pri\" : %p,\n" \
> - " \"host_wwnn\" : \"%N\",\n" \
> - " \"target_wwnn\" : \"%n\",\n" \
> - " \"host_wwpn\" : \"%R\",\n" \
> - " \"target_wwpn\" : \"%r\",\n" \
> - " \"host_adapter\" : \"%a\",\n" \
> - " \"marginal_st\" : \"%M\""
> -
> -#define MAX_LINE_LEN 80
> -#define MAX_LINES 64
> -#define MAX_FIELD_LEN 128
> -#define PROGRESS_LEN 10
> +struct strbuf;
>
> struct path_data {
> char wildcard;
> --
> 2.32.0
--
dm-devel mailing list
dm-devel@redhat.com
https://listman.redhat.com/mailman/listinfo/dm-devel
next prev parent reply other threads:[~2021-07-29 2:37 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-15 10:52 [dm-devel] [PATCH 0/9] multipath-tools: use variable-size string buffers mwilck
2021-07-15 10:52 ` [dm-devel] [PATCH 1/9] libmultipath: variable-size parameters in dm_get_map() mwilck
2021-07-26 22:17 ` Benjamin Marzinski
2021-08-11 14:18 ` Martin Wilck
2021-07-15 10:52 ` [dm-devel] [PATCH 2/9] libmultipath: strbuf: simple api for growing string buffers mwilck
2021-07-27 4:54 ` Benjamin Marzinski
2021-08-11 15:03 ` Martin Wilck
2021-07-15 10:52 ` [dm-devel] [PATCH 3/9] libmultipath: variable-size parameters in assemble_map() mwilck
2021-07-28 15:54 ` Benjamin Marzinski
2021-08-11 15:15 ` Martin Wilck
2021-07-15 10:52 ` [dm-devel] [PATCH 4/9] libmultipath: use strbuf in dict.c mwilck
2021-07-28 19:03 ` Benjamin Marzinski
2021-08-11 15:27 ` Martin Wilck
2021-08-30 18:23 ` Benjamin Marzinski
2021-07-15 10:52 ` [dm-devel] [PATCH 5/9] libmultipath: use strbuf in print.c mwilck
2021-07-29 0:00 ` Benjamin Marzinski
2021-07-15 10:52 ` [dm-devel] [PATCH 6/9] libmultipath: print.c: fail hard if keywords are not found mwilck
2021-07-29 2:36 ` Benjamin Marzinski
2021-07-15 10:52 ` [dm-devel] [PATCH 7/9] libmultipath: print.h: move macros to print.c mwilck
2021-07-29 2:36 ` Benjamin Marzinski [this message]
2021-07-15 10:52 ` [dm-devel] [PATCH 8/9] libmultipath: use strbuf in alias.c mwilck
2021-07-29 15:22 ` Benjamin Marzinski
2021-07-15 10:52 ` [dm-devel] [PATCH 9/9] multipathd: use strbuf in cli.c mwilck
2021-07-29 15:46 ` Benjamin Marzinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210729023655.GO3087@octiron.msp.redhat.com \
--to=bmarzins@redhat.com \
--cc=dm-devel@redhat.com \
--cc=mwilck@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).